Different retiming transformation technique to design optimized low power VLSI architecture

Jalaja S; Vijaya Prakash A M; Jalaja S; Vijaya Prakash A M

doi:10.3934/ElectrEng.2018.4.117

AIMS Electronics and Electrical Engineering

2018, Volume 2, Issue 4: 117-130. doi: 10.3934/ElectrEng.2018.4.117

Previous Article Next Article

Research article

Different retiming transformation technique to design optimized low power VLSI architecture

Jalaja S ^{1
,
,},
Vijaya Prakash A M ²

1.
Department of Electronics and Communication, Research Scholar, Visvesvaraya Technological University, Bangalore Institute of Technology, Bangalore, India
2.
Department of Electronics and Communication, Bangalore Institute of Technology, Bangalore, India

Received: 06 September 2018 Accepted: 14 November 2018 Published: 26 November 2018

A different method for designing low power retime architecture is presented in this paper. The modified retiming transformation techniques approach to reduce the dynamic power consumption of the digital circuit, without compromising the output results. In this paper, retiming transformation is extended in two-ways to reduce the power consumption of the design. Graphical Circular Retiming and Tabular Shift Retiming are the two methods used to realize how the registers are mapped to reduce the glitching power. Proposed transformation technique delay value is placed in the form of metric and verified without sacrificing the functionality. Proposed transformation technique is applied to FIR filter to analyze the simulation and synthesis results as proofs of this concept. Experimental results are compared with the conventional retiming transformation technique with the same operating frequency, and with the significant reduction in dynamic power of FIR filter.

Keywords:

Citation: Jalaja S, Vijaya Prakash A M. Different retiming transformation technique to design optimized low power VLSI architecture[J]. AIMS Electronics and Electrical Engineering, 2018, 2(4): 117-130. doi: 10.3934/ElectrEng.2018.4.117

Related Papers:

[1]	José M. Campos-Salazar, Roya Rafiezadeh, Felipe Santander, Juan L. Aguayo-Lazcano, Nicolás Kunakov . Comprehensive GSSA and D-Q frame dynamic modeling of dual-active-bridge DC-DC converters. AIMS Electronics and Electrical Engineering, 2025, 9(3): 288-313. doi: 10.3934/electreng.2025014
[2]	Mehdi Tabasi, Pouyan Asgharian . Optimal operation of energy storage units in distributed system using social spider optimization algorithm. AIMS Electronics and Electrical Engineering, 2019, 3(4): 309-327. doi: 10.3934/ElectrEng.2019.4.309
[3]	Samarjit Patnaik, Manas Ranjan Nayak, Meera Viswavandya . Smart deployment of energy storage and renewable energy sources for improving distribution system efficacy. AIMS Electronics and Electrical Engineering, 2022, 6(4): 397-417. doi: 10.3934/electreng.2022024
[4]	Manisha Bangar, Prachi Chaudhary . A novel approach for the classification of diabetic maculopathy using discrete wavelet transforms and a support vector machine. AIMS Electronics and Electrical Engineering, 2023, 7(1): 1-13. doi: 10.3934/electreng.2023001
[5]	Martial Giraneza, Khaled Abo-Al-Ez . Power line communication: A review on couplers and channel characterization. AIMS Electronics and Electrical Engineering, 2022, 6(3): 265-284. doi: 10.3934/electreng.2022016
[6]	Mamun Mishra, Bibhuti Bhusan Pati . A hybrid IDM using wavelet transform for a synchronous generator-based RES with zero non-detection zone. AIMS Electronics and Electrical Engineering, 2024, 8(1): 146-164. doi: 10.3934/electreng.2024006
[7]	Fadhil A. Hasan, Lina J. Rashad . Combining fractional-order PI controller with field-oriented control based on maximum torque per ampere technique considering iron loss of induction motor. AIMS Electronics and Electrical Engineering, 2024, 8(3): 380-403. doi: 10.3934/electreng.2024018
[8]	K.V. Dhana Lakshmi, P.K. Panigrahi, Ravi kumar Goli . Machine learning assessment of IoT managed microgrid protection in existence of SVC using wavelet methodology. AIMS Electronics and Electrical Engineering, 2022, 6(4): 370-384. doi: 10.3934/electreng.2022022
[9]	Fuhong Meng, Guowu Yuan, Hao Zhou, Hao Wu, Yi Ma . Improved MViTv2-T model for insulator defect detection. AIMS Electronics and Electrical Engineering, 2025, 9(1): 1-25. doi: 10.3934/electreng.2025001
[10]	Charles Aimiuwu Osaretin, Tariq Iqbal, Stephen Butt . Optimal sizing and techno-economic analysis of a renewable power system for a remote oil well. AIMS Electronics and Electrical Engineering, 2020, 4(2): 132-153. doi: 10.3934/ElectrEng.2020.2.132

Abstract

References

[1]	Mittal A, Nandi A and Yadav D (2017) Comparative study of 16-order FIR filter design using different multiplication techniques. IET Circ Device Syst 11: 196–200. doi: 10.1049/iet-cds.2016.0146
[2]	Rashidi B (2013) High performance and low-power finite impulse response filter based on ring topology with modified retiming serial multiplier on FPGA. IET Signal Process 7: 743–753. doi: 10.1049/iet-spr.2013.0153
[3]	Mohanty BK and Meher PK (2016) A High-Performance FIR Filter Architecture for Fixed and Reconfigurable Applications. IEEE Transactions on Very Large Scale Integration Systems 24: 444–452. doi: 10.1109/TVLSI.2015.2412556
[4]	Leiserson CE, Rose FM and Saxe JB (1983) Optimizing synchronous circuitry by retiming. 3rd Caltech conference on VLSI, pp. 87–116, Springer, Berlin, Heidelberg.
[5]	Leiserson CE and Saxe (1991) Retiming synchronous circuitry. Algorithmica 6: 5–35. doi: 10.1007/BF01759032
[6]	Chen JJ, Chip-Hong C, Feng F, et al. (2015) Novel Design Algorithm for Low Complexity Programmable FIR Filters Based on Extended Double Base Number System. IEEE T Circuits- I 62: 224–233.
[7]	Monteiro JC, Devadas S and Ghosh A (1993) Retiming sequential circuits for low power. Proceedings of the IEEE/ACM International conference on Computer-Aided Design, 398–402.
[8]	Parhi KK (2007) VLSI digital signal processing systems: design and implementation. John Wiley and Sons.
[9]	Aksoy L, Flores PF and Monteiro JC (2014) Efficient Design of FIR Filters Using Hybrid Multiple Constant Multiplications on FPGA. 2014 IEEE 32nd International Conference on Computer Design (ICCD), 42–47.
[10]	Meidani M and Mashoufi B (2016) Introducing new algorithms for realising an FIR filter with less hardware in order to eliminate power line interference from the ECG signal. IET Signal Process 10: 709–716. doi: 10.1049/iet-spr.2015.0552
[11]	Meher PK (2016) On Efficient Retiming of Fixed Point Circuits. IEEE Transactions on Very Large Scale Integration Systems 24: 1257–1265. doi: 10.1109/TVLSI.2015.2453324
[12]	Park SY and Meher PK (2014) Efficient FPGA and ASIC Realizations of a DA-Based Reconfigurable FIR Digital Filter. IEEE T Circuits-II 61: 511–515.
[13]	Lou X, Yu YJ and Meher PK (2016) Analysis and Optimization of Product-Accumulation Section for Efficient Implementation of FIR Filters. IEEE T Circuits-II 63: 1701–1713.
[14]	Kang Y, Kim J and Kang S (2016) Novel Approximate Synthesis Flow for Energy-efficient FIR Filter. 2016 IEEE 34th International Conference on Computer Design (ICCD), 96–102.
[15]	Pan Y and Meher PK (2014) Bit-Level Optimization of Adder-Trees for Multiple Constant Multiplications for Efficient FIR Filter Implementation. IEEE T Circuits-I 61: 455–462. doi: 10.1109/TCSI.2013.2278331

This article has been cited by:

1.	Maria Costa, Herve Delingette, Nicholas Ayache, 2007, AUTOMATIC SEGMENTATION OF THE BLADDER USING DEFORMABLE MODELS, 1-4244-0671-4, 904, 10.1109/ISBI.2007.356999
2.	T. Telksnys, I. Timofejeva, Z. Navickas, R. Marcinkevicius, R. Mickevicius, M. Ragulskis, Solitary solutions to an androgen‐deprivation prostate cancer treatment model, 2020, 0170-4214, 10.1002/mma.6168
3.	M. Martina, G. Masera, Mumford and Shah functional: VLSI analysis and implementation, 2006, 28, 0162-8828, 487, 10.1109/TPAMI.2006.59
4.	G. Bueno, O. Déniz, J. Salido, C. Carrascosa, J. M. Delgado, A geodesic deformable model for automatic segmentation of image sequences applied to radiation therapy, 2011, 6, 1861-6410, 341, 10.1007/s11548-010-0513-9
5.	Chong Tian, Yegang Chen, Image Segmentation and Denoising Algorithm Based on Partial Differential Equations, 2020, 20, 1530-437X, 11935, 10.1109/JSEN.2019.2959704
6.	Joshua H. Levy, Rohit R. Saboo, Edward L. Chaney, Stephen M. Pizer, 2008, A large-to-fine-scale shape prior for probabilistic segmentations using a deformable m-rep, 978-1-4244-2339-2, 1, 10.1109/CVPRW.2008.4563019
7.	Ning J. Yue, Sung Kim, Brett E. Lewis, Salma Jabbour, Venkat Narra, Sharad Goyal, Bruce G. Haffty, Optimization of couch translational corrections to compensate for rotational and deformable target deviations in image guided radiotherapy, 2008, 35, 00942405, 4375, 10.1118/1.2977532
8.	Antoine du Chéné, Chohong Min, Frédéric Gibou, Second-Order Accurate Computation of Curvatures in a Level Set Framework Using Novel High-Order Reinitialization Schemes, 2008, 35, 0885-7474, 114, 10.1007/s10915-007-9177-1
9.	Are Losnegård, Liv Bolstad Hysing, Ludvig Paul Muren, Erlend Hodneland, Arvid Lundervold, Semi-automated segmentation of the sigmoid and descending colon for radiotherapy planning using the fast marching method, 2010, 55, 0031-9155, 5569, 10.1088/0031-9155/55/18/020
10.	U Malsch, C Thieke, P E Huber, R Bendl, An enhanced block matching algorithm for fast elastic registration in adaptive radiotherapy, 2006, 51, 0031-9155, 4789, 10.1088/0031-9155/51/19/005
11.	Gloria Bueno, Oscar Déniz, Jesús salido, Carmen Carrascosa, José M. Delgado, Three-dimensional organ modeling based on deformable surfaces applied to radio-oncology, 2010, 11, 1869-1951, 407, 10.1631/jzus.C0910402
12.	Maurizio Martina, Guido Masera, Multiplierless Mumford and Shah Functional Implementation, 2011, 30, 0278-081X, 567, 10.1007/s00034-010-9244-y
13.	Yingjian Yang, Qiang Li, Yingwei Guo, Yang Liu, Xian Li, Jiaqi Guo, Wei Li, Lei Cheng, Huai Chen, Yan Kang, Lung parenchyma parameters measure of rats from pulmonary window computed tomography images based on ResU-Net model for medical respiratory researches, 2021, 18, 1551-0018, 4193, 10.3934/mbe.2021210
14.	Luis Ángel Larios-Cárdenas, Frédéric Gibou, Machine learning algorithms for three-dimensional mean-curvature computation in the level-set method, 2023, 478, 00219991, 111995, 10.1016/j.jcp.2023.111995
15.	Vidhya Rekha Umapathy, Prabhu Manickam Natarajan, Bhuminathan Swamikannu, Sabarinathan Jaganathan, Suba Rajinikanth, Vijayalakshmi Periyasamy, Yibo Wu, Role of Artificial Intelligence in Oral Cancer, 2024, 2024, 2356-6868, 10.1155/adph/3664408

Reader Comments

Your name:*

Email:*
© 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)