Against the background of increasing gas turbine inlet temperature and decreasing amount of cooling air, laminated cooling structure (LCS) is a highly efficient composite cooling structure with the advantages of lower cooling air consumption and higher cooling efficiency, which is a promising development direction for future wall cooling technology. In this review, we provide an overview of LCS's structural optimization research. The experimental and simulation studies therein were reviewed, and the major influencing parameters in the structure were analyzed in detail. The characteristics of various optimization methods were investigated, and the research methodology and optimization process of multi-objective optimization of laminated cooling structure were summarized. The review shows that laminated cooling structure, as a kind of composite cooling structure, has numerous geometrical and flow factors affecting its cooling efficiency. Multi-objective optimization techniques have effective application prospects in this field. In the future, researchers should focus on enhancing the efficiency and accuracy of multi-objective optimization algorithms. They should also explore the application of machine learning and artificial intelligence in LCS optimization, thereby promoting the intelligence and automation of design optimization.
Citation: Xiaojing Tian, Weiqi Ye, Liang Xu, Anjian Yang, Langming Huang, Shenglong Jin. Optimization research on laminated cooling structure for gas turbines: A review[J]. AIMS Energy, 2025, 13(2): 354-401. doi: 10.3934/energy.2025014
[1] | Divine Wanduku . A nonlinear multi-population behavioral model to assess the roles of education campaigns, random supply of aids, and delayed ART treatment in HIV/AIDS epidemics. Mathematical Biosciences and Engineering, 2020, 17(6): 6791-6837. doi: 10.3934/mbe.2020354 |
[2] | Yicang Zhou, Zhien Ma . Global stability of a class of discrete age-structured SIS models with immigration. Mathematical Biosciences and Engineering, 2009, 6(2): 409-425. doi: 10.3934/mbe.2009.6.409 |
[3] | Miguel Atencia, Esther García-Garaluz, Gonzalo Joya . The ratio of hidden HIV infection in Cuba. Mathematical Biosciences and Engineering, 2013, 10(4): 959-977. doi: 10.3934/mbe.2013.10.959 |
[4] | Churni Gupta, Necibe Tuncer, Maia Martcheva . Immuno-epidemiological co-affection model of HIV infection and opioid addiction. Mathematical Biosciences and Engineering, 2022, 19(4): 3636-3672. doi: 10.3934/mbe.2022168 |
[5] | Churni Gupta, Necibe Tuncer, Maia Martcheva . A network immuno-epidemiological model of HIV and opioid epidemics. Mathematical Biosciences and Engineering, 2023, 20(2): 4040-4068. doi: 10.3934/mbe.2023189 |
[6] | Tefa Kaisara, Farai Nyabadza . Modelling Botswana's HIV/AIDS response and treatment policy changes: Insights from a cascade of mathematical models. Mathematical Biosciences and Engineering, 2023, 20(1): 1122-1147. doi: 10.3934/mbe.2023052 |
[7] | Jeff Musgrave, James Watmough . Examination of a simple model of condom usage and individual withdrawal for the HIV epidemic. Mathematical Biosciences and Engineering, 2009, 6(2): 363-376. doi: 10.3934/mbe.2009.6.363 |
[8] | Moatlhodi Kgosimore, Edward M. Lungu . The Effects of Vertical Transmission on the Spread of HIV/AIDS in the Presence of Treatment. Mathematical Biosciences and Engineering, 2006, 3(2): 297-312. doi: 10.3934/mbe.2006.3.297 |
[9] | Brandy Rapatski, Juan Tolosa . Modeling and analysis of the San Francisco City Clinic Cohort (SFCCC) HIV-epidemic including treatment. Mathematical Biosciences and Engineering, 2014, 11(3): 599-619. doi: 10.3934/mbe.2014.11.599 |
[10] | Brandy Rapatski, Petra Klepac, Stephen Dueck, Maoxing Liu, Leda Ivic Weiss . Mathematical epidemiology of HIV/AIDS in cuba during the period 1986-2000. Mathematical Biosciences and Engineering, 2006, 3(3): 545-556. doi: 10.3934/mbe.2006.3.545 |
Against the background of increasing gas turbine inlet temperature and decreasing amount of cooling air, laminated cooling structure (LCS) is a highly efficient composite cooling structure with the advantages of lower cooling air consumption and higher cooling efficiency, which is a promising development direction for future wall cooling technology. In this review, we provide an overview of LCS's structural optimization research. The experimental and simulation studies therein were reviewed, and the major influencing parameters in the structure were analyzed in detail. The characteristics of various optimization methods were investigated, and the research methodology and optimization process of multi-objective optimization of laminated cooling structure were summarized. The review shows that laminated cooling structure, as a kind of composite cooling structure, has numerous geometrical and flow factors affecting its cooling efficiency. Multi-objective optimization techniques have effective application prospects in this field. In the future, researchers should focus on enhancing the efficiency and accuracy of multi-objective optimization algorithms. They should also explore the application of machine learning and artificial intelligence in LCS optimization, thereby promoting the intelligence and automation of design optimization.
The treatment of Human Immunodeficiency Virus-1 (HIV) infection presently faces extraordinary opportunities and challenges in achieving durable efficacy in previously untreated subjects. In fact, even though it does not allow a complete elimination of the virus from several tissue and blood cell reservoirs, antiretroviral treatment has been shown to decrease viral replication as detected by HIV ribonucleic acid (RNA) in plasma [27,35]. The virological control obtained on treatment, documented by undetectable levels of HIV RNA in plasma, has been shown to improve the immunological setting of patients, increasing the number of CD4+ cells, the subset of lymphocytes mainly affected by the virus [23].
Since high rates of HIV RNA control have been shown on treatment both in recent cohort studies and in clinical trials [36], this achievement has been associated with a marked decrease in several opportunistic infections and clinical comorbidities [40,12]. Besides, a successful virological control has also beneficial effects in reducing the spread of HIV infection through sexual contacts, as documented by studies evaluating antiretroviral treatment as a tool for the prevention of HIV transmission to healthy partners [14].
The decrease in CD4 cell counts during HIV infection in the absence of therapy has been used in the past to obtain a marker of immune depletion in order to advise in favor or against the introduction of antiretroviral therapy. Since AIDS-related opportunistic infections generally appear when CD4 are lower than 200 cells
According to estimates by the Italian National Institute of Health, about 120,000 individuals are living with HIV in Italy [7]. A recent investigation reports that 94,146 individuals were in care at public clinical centres at the end of 2012 and 82,501 were receiving antiretroviral treatments [6]. The proportion of patients in therapeutic failure is precisely unknown, even if clinical trial data show that the prevalence of HIV undetectability on treatment can reach 80-90
Since the seminal paper by May and Anderson [26], a large number of studies have been devoted to mathematical models of HIV epidemic. We mention some recent investigations [17,16,18] that establish global dynamics properties of classes of models of interest for the HIV epidemic. Other mathematical models have been developed either to assess the impact of larger treatment availability on the spread of HIV [21,11], showing a beneficial impact on the reduction of the infection incidence rate, and to assess the effects of virus mutation and of drug resistance onset [2,34,24].
Many papers aim at describing the epidemic evolution in single countries or in single geografic regions (see e.g [33,28,44]). Concerning Italy, Arcà et al. built a detailed multi-stage ODE model for the HIV transmission in Latium (the Italian region around Rome), with eight groups differentiated by sex and routes of infection [1]. With focus on the epidemic among drug users in Latium, Iannelli et al. [19] proposed an age-structured model validated against data on the number of new AIDS cases. Camoni et al. [7], by considering different high-risk subpopulations, and gathering a number of different statistical information, gave an estimate of the history of the epidemic in Italy, taking also into account the practice of therapy. Nevertheless, no predictions are available about the possible impact of an early antiretroviral treatment and 'test and treat' strategies on HIV epidemic in specific European Countries, such as Italy.
In order to forecast the possible impact of new strategies in antiretroviral management, a differential equation model is developed in the present paper to describe the evolution of HIV epidemic in Italy for the years
In Section 2, the ODE model is formulated, and in Section 3 the parameter values are assessed, in part by means of best fitting of available data over the decade
The present model describes the dynamics of HIV infection in Italy by assuming that the heterosexual/homosexual activity and the exchange of needles among drug users are the only significant modalities of HIV transmission. Therefore, the mother-child transmission and the transmission by blood transfusion are disregarded. This choice is supported by recent reports of the Italian National Institute of Health [4,5], indicating that the percentages of new diagnoses in 2012 and 2013 related to transmission routes not involving inter-individual contacts are less than
The HIV epidemic in Italy is still mainly concentrated in high risk subpopulations (injected drug users, male homosexuals, female sex workers, multi-partners heterosexual male). However, there are evidences of an important spreading of the infection outside these groups. Indeed, 32
On the basis of this evidence and for the sake of simplicity, we assume in our model that the population susceptible of infection,
To represent the intra-host disease progression, the untreated infected population is distributed over four compartments in cascade according to the CD4 counts. In particular, according to [1,34], we distinguish the infected population
•
•
•
•
Compartment
Under the above assumptions, we can describe the dynamics of susceptible and infected subpopulations by the following ODE system (see the block diagram of Figure 1):
˙S(t)=Λ(t)+(1−α)Φ(t)−μ(t)S(t)−(5∑n=1βnIn(t))S(t)˙I1(t)=a1αΦ(t)+(5∑n=1βnIn(t))S(t)−(θ1+μ(t))I1(t),˙I2(t)=a2αΦ(t)+θ1I1(t)−(θ2+μ(t)+δ2)I2(t),˙I3(t)=a3αΦ(t)+θ2I2(t)−(θ3+μ(t)+δ3)I3(t)+ξ(t)I5(t),˙I4(t)=θ3I3(t)−(θ4+μ(t)+δ4)I4(t),˙I5(t)=δ2I2(t)+δ3I3(t)+δ4I4(t)−(ξ(t)+μ(t))I5(t), | (1) |
where
Note that, since immigration of people in AIDS stage appears rather unlikely, no input from immigration is assumed into compartment
an=1/θn1/θ1+1/θ2+1/θ3,n=1,2,3, | (2) |
that is
The possibility of starting the treatment from different stages of the disease is taken into account by the per capita treatment rates,
We assumed in model 1 a bilinear form of the incidence rate, instead of the more usual standard incidence where the infective population is normalized to the total population size, which is
The behaviour of the model has been tested by comparison with epidemiological data over the years
• number of infected individuals over the years
• number of treated individuals at the end of 2012 from data of public clinical centres [6];
• number of new AIDS cases over the years
• number of deaths from AIDS over the years
Data reported by the National Institute of Statistics [31] were used to estimate the time-course of the demographic quantities
μk=MkˉN[20,70]k⋅365, |
where
Since
dN[20,70](t)dt=Λ(t)+Φ(t)−μ(t)N[20,70](t). | (3) |
that does not include the loss due to the ageing of infected people beyond age
Eq. 3 allows the estimation of
Concerning the disease progression, the parameters
Parameters | Value | Source |
[31] | ||
[31] | ||
[31] | ||
[7] | ||
Assumed | ||
Assumed | ||
[34] | ||
[34] | ||
[34,45] | ||
[34,45] | ||
Estimated | ||
[34] | ||
[34] | ||
[34] | ||
[34,6] | ||
δ2 | 1.10·10-19 day-1 | Estimated |
δ3 | 2.27·10-3 day-1 | Estimated |
δ4 | 3.2·10-3 day-1 | Estimated |
We remark here that the parameters
The exit rate from the treatment
The remaining parameters
The best fitting of the available data suggests that, in the decade
We start by predicting the HIV epidemic evolution up to 2025, assuming that
Next, to investigate the effect of changing the treatment eligibility criterion, we hypothesize two scenarios: a)
Finally, we investigated the effect of changing the treatment exit rate and the infectivity of treated subjects. In particular, we first assumed
The effect of changing the infectivity of treated subjects is shown in Table 2. The values of some significant quantities at January 1st 2025 are reported for
Values at January 1st 2025 | |||
0.1 | 0.2 | 0.3 | |
Infected (persons) | | | |
Treated (persons) | | | |
HIV infection rate (persons | 3.85 | 5.794 | 7.816 |
New cases of AIDS (persons | 975.3 | 1062 | 1149 |
AIDS deaths (persons | 557.3 | 606.7 | 656.8 |
In this section, we establish the stability properties of the time-invariant version of the model described by Eqs. 1, where the functions
˙S(t)=Λ+(1−α)Φ−μS(t)−(5∑n=1βnIn(t))S(t)˙I1(t)=a1αΦ+(5∑n=1βnIn(t))S(t)−(θ1+μ)I1(t),˙I2(t)=a2αΦ+θ1I1(t)−(θ2+μ+δ2)I2(t),˙I3(t)=a3αΦ+θ2I2(t)−(θ3+μ+δ3)I3(t)+ξI5(t),˙I4(t)=θ3I3(t)−(θ4+μ+δ4)I4(t),˙I5(t)=δ2I2(t)+δ3I3(t)+δ4I4(t)−(ξ+μ)I5(t), | (4) |
with
Λ+(1−α)Φ>0. | (5) |
The above assumption prevents the susceptible population from the extinction. Indeed, if
We observe that the set
Ω={(S,I1,…,I5)∈IR6+|S+5∑n=1In≤Λ+Φμ}, | (6) |
where
˙N(t)=˙S(t)+5∑n=1˙In(t)=Λ+Φ−μN(t)−θ4I4(t) ≤Λ+Φ−μN(t), | (7) |
for non-negative
N(t)≤N(t0)e−μ(t−t0)+Λ+Φμ(1−e−μ(t−t0)), | (8) |
which in turn implies
Also, we remark that if an equilibrium point of system 4 exists in
Λ+Φ−μN∗−θ4I∗4=0, | (9) |
whereas if
Λ+Φ−μN∗−θ4I∗4<0. |
Denoting by
Λ+Φ=μS∗+(5∑n=1βnI∗n)S∗,Q1I∗1=(5∑n=1βnI∗n)S∗,Q2I∗2=θ1I∗1,Q3I∗3=θ2I∗2+ξI∗5,Q4I∗4=θ3I∗3,Q5I∗5=δ2I∗2+δ3I∗3+δ4I∗4, | (10) |
where
Q1=θ1+μ,Q2=θ2+μ+δ2,Q3=θ3+μ+δ3,Q4=θ4+μ+δ4,Q5=ξ+μ. | (11) |
From the last four equations in 10 we obtain:
I∗n=mnI∗1,n=2,…,5, | (12) |
where
m2=θ1Q2,m3=θ2+δ2(ξ/Q5)Q3−δ3(ξ/Q5)−θ3(δ4/Q4)(ξ/Q5)m2,m4=θ3Q4m3,m5=δ2Q5m2+δ3Q5m3+δ4Q5m4. | (13) |
Introducing the notation
η=β1+β2m2+β3m3+β4m4+β5m5, |
and taking into account 12, the first two equations of the system 10 can be rewritten as
Λ+Φ−μS∗−ηI∗1S∗=0,I∗1(ηS∗−Q1)=0. | (14) |
System 14 admits two different solutions
S∗=Λ+Φμ,I∗1=0 or S∗=Q1η,I∗1=(Λ+ΦQ1−μη), | (15) |
meaning that system 4 has in
S∗=Λ+Φμ,I∗n=0,n=1,…,5, | (16) |
and, if and only if
S∗=Q1η,I∗n=mn(Λ+ΦQ1−μη),n=1,…,5, | (17) |
where
The stability analysis of the disease-free equilibrium has been performed by means of the reproduction number
f=[(5∑n=1βnIn(t))S(t)0000], | (18) |
v=[Q1I1(t)−θ1I1(t)+Q2I2(t)−θ2I2(t)−ξI5(t)+Q3I3(t)−θ3I3(t)+Q4I4(t)−δ2I2(t)−δ3I3(t)−δ4I4(t)+Q5I5(t)], | (19) |
where the generic entry
F=∇f|Edf=Λ+Φμ[β1β2β3β4β500000000000000000000], | (20) |
V=∇v|Edf=[Q10000−θ1Q20000−θ2Q30−ξ00−θ3Q400−δ2−δ3−δ4Q5]. | (21) |
According to [9], the reproduction number is defined as the spectral radius of the next generation matrix
V−1=1Q1[1∗∗∗∗m2∗∗∗∗m3∗∗∗∗m4∗∗∗∗m5∗∗∗∗], | (22) |
where only the first column of
R=ρ(FV−1)=Λ+ΦμηQ1, | (23) |
where
It is useful to rewrite the expression of the endemic equilibrium in terms of
S∗=Λ+Φμ1R,I∗n=mnQ1μ(R−1),n=1,…,5, | (24) |
showing that the endemic equilibrium exists if and only if
Thanks to the bilinear form of the incidence rate, it can be verified that model 4 with
Theorem 5.1. When
proof. See the proof of Theorem 4.1 in [18]. It can be easily verified that our model satisfies all the basic assumptions (
Theorem 5.2. When
Proof. The proof of the existence comes directly from Eq. 24. Indeed, vector 24 is positive if and only if
In view of the analysis of model 4 with
L(S,I1,…,I5)=c1(S−S∗−S∗ln(SS∗))+5∑n=1cn(In−I∗n−I∗nln(InI∗n)), | (25) |
which, for positive coefficients
L(S,I1,…,I5)=0⇔(S,I1,…,,I5)=(S∗,I∗1,…,I∗5),L(S,I1,…,I5)>0,∀(S,I1,…,I5)≠(S∗,…,I∗5). | (26) |
From Eq. 25 it follows
˙L(S,I1,…,I5)=c1(1−S∗S)˙S+5∑n=1cn(1−I∗nIn)˙In. | (27) |
By exploiting either the equations of the dynamic system 4 and the equilibrium equations in 10, and introducing also the compact notation
˙L(S,I1,…,I5)=c1(μS∗(2−s−1s)+5∑n=1βnS∗I∗n(2−sini1−1s−i1+in))+c2(θ1I∗1(1−i1i2−i2+i1))+c3(θ2I∗2(1−i2i3−i3+i2)+ξI∗5(1−i5i3−i3+i5))+c4(θ3I∗3(1−i3i4−i4+i3))+c5(δ2I∗2(1−i2i5−i5+i2)+δ3I∗3(1−i3i5−i5+i3)+δ4I∗4(1−i4i5−i5+i4)). | (28) |
Such a function is non-positive in the interior of
c1=Θ1Θ3(Θ24∑n=2Δn+Ξ5Δ2),c2=5∑n=2BnΘ3(Θ24∑n=2Δn+Ξ5Δ2),c3=Θ1Θ3(B34∑n=2Δn+B44∑n=2Δn+B54∑n=3Δn),c4=Θ1(B3Ξ5Δ4+B4(Θ24∑n=2Δn+Ξ5(Δ2+Δ4))+B5Δ4(Θ2+Ξ5)),c5=Θ1Θ3(Ξ55∑n=3Bn+Θ2B5), | (29) |
where
Θ1=θ1I∗1,Θ2=θ2I∗2,Θ3=θ3I∗3,Δ2=δ2I∗2,Δ3=δ3I∗3,Δ4=δ4I∗4,Ξ5=ξI∗5,Bn=βnS∗I∗n,n=2,…,5. | (30) |
Therefore, we obtain
In order to illustrate the role of antiviral treatment, it may be of interest to compute the reproduction number
In this section we report the equilibrium analysis of model 4 when
For the generic equilibrium point, the following algebraic system holds
Λ+(1−α)Φ=μS∗+(5∑n=1βnI∗n)S∗,Q1I∗1=(5∑n=1βnI∗n)S∗+a1αΦ,Q2I∗2=a2αΦ+θ1I∗1,Q3I∗3=a3αΦ+θ2I∗2+ξI∗5,Q4I∗4=θ3I∗3,Q5I∗5=δ2I∗2+δ3I∗3+δ4I∗4, | (31) |
where the quantities
I∗n=qn+mnI∗1,n=2,…,5, | (32) |
where the coefficients
q2=a2αΦQ2,q3=a3αΦQ3−δ3(ξ/Q5)−θ3(δ4/Q4)(ξ/Q5)+θ2+δ2(ξ/Q5)Q3−δ3(ξ/Q5)−θ3(δ4/Q4)(ξ/Q5)q2,q4=θ3Q4q3,q5=δ2Q5q2+δ3Q5q3+δ4Q5q4. | (33) |
Theorem 5.3. When
Proof. Recalling the definition of
γ=β2q2+β3q3+β4q4+β5q5, |
from the first two equations of 31 and from equations 32 we obtain
S∗=Λ+(1−α)Φγ+ηI∗1+μ, | (34) |
and the quadratic equation in the variable
aI∗12+bI∗1+c=0, |
where
a=−Q1η,b=(Λ+(1+a1α−α)Φ)η−Q1(γ+μ),c=a1αΦμ+(Λ+(1+a1α−α)Φ)γ. |
From 5 we have
I∗1=ζ+√ζ2+ν,ζ=(Λ+(1+a1α−α)Φ)η−Q1(γ+μ)2Q1η,ν=a1αΦμ+(Λ+(1+a1α−α)Φ)γQ1η. | (35) |
Note that if a positive equilibrium exists, Eq. 34 implies that 5 must hold. Thus, 5 is a necessary and sufficient condition for the existence of the unique positive equilibrium defined by Eqs. 34, 35, and 32.
The stability of such an endemic equilibrium can be proved considering the same Lyapunov function defined by 25. Indeed, from the derivative of
˙L(S,I1,…,I5)=˙L′(S,I1,…,I5)+˙L′′(S,I1,…,I5), | (36) |
where
˙L′(S,I1,…,I5)=3∑n=1cnanαΦ(2−in−1in), | (37) |
while the term
Note that if the weaker condition
The present paper presents a mathematical model developed to assess the impact of early treatment strategies in Italy. If the treatment is initiated regardless of CD4 cell counts at diagnosis, a significant impact over AIDS incidence and mortality is predicted, provided that the trend of reduced resistance to drug, observed in the decade
It must be recalled, however, that the knowledge about the HIV prevalence among immigrants and the infectivity of treated subjects is rather uncertain up to now. So, a better assessment of the value of these parameters would improve the quantitative reliability of the model. Conversely, more subtle phenomena like the possible dependence of some model parameters on the virus strain, as well as the possible correlation between the transmission routes and the drug resistance mutations of the transmitted virus [30], are expected to be of minor importance owing to the large prevalence of wild type HIV infections in Europe (more than 90
The formal analysis of the model has allowed to establish the existence of equilibria and their global stability, classifying them on the basis of the prevalence of infected among immigrants. Only in the case in which the fraction of infected among immigrants is zero, the disease-free equilibrium exists and a threshold parameter for its stability can be identified in the reproduction number. The value of the reproduction number, moreover, has a non-trivial relationship with the parameters characterizing the dynamics of the compartment related to patients under treatment.
However, the knowledge of equilibria and their stability is scarcely useful for predicting the HIV epidemic over reasonable time horizons. Numerical simulations have shown indeed a very slow convergence to the equilibrium point (
It may be questioned whether the disease progression in patients for whom therapy is interrupted or is no longer effective can be equated with the progression experienced by naive infected individuals. Thus, it would be worthy to design and study a little more complex model in which different disease progressions for naive and previously treated patients are considered. Finally, it cannot be guaranteed that the trend of reduced drug resistance will continue over the next decade. Therefore, a model of the evolution in Italy of the resistance to different classes of drugs is still needed and it is the main goal of our future work.
Acknowledgments. The present work was partially supported by the PRIN "Study of determinants of secondary and primary resistance to antiretrovirals to support control strategies of HIV transmission". The authors wish to thank the anonymous referees for their useful suggestions and comments.
Appendix. It can be easily verified that the basic hypotheses (
Additional properties are required to prove the global asymptotic stability of the disease-free equilibrium and the global asymptotic stability of the unique endemic equilibrium. In this section, it is shown that all these additional properties are satisfied by our model.
With this aim we introduce the following notation:
•
•
•
•
We also denote by
(A1): For
gn(S,In)−gn(˜S,In)=βn(S−˜S)In≤0,0≤S≤˜S,In≥0,gn(S,In)−gn(˜S,In)=βn(S−˜S)In=0,In>0,⟹S=˜S, |
0<gn(˜S,In)ψ(In)=βn˜SQn<∞,In>0; |
(A2): For
0≤ωj,n(In)ψ(In)=σj,nQn<∞,In>0; |
(B1): For
(χ(S)−χ(S∗))(φ(S)−φ(S∗))=−μ(S−S∗)2<0; |
(B2): For
(gn(S,In)φ(S)−gn(S∗,I∗n)φ(S∗))(gn(S,In)φ(S)ψn(In)−gn(S∗,I∗n)φ(S∗)ψn(I∗n))= βn(In−I∗n)(βnQn−βnQn)=0; |
(B3): For
(ωj,n(In)−ωj,n(In)∗)(ωj,n(In)ψn(In)−ωj,n(In)∗)ψn(I∗n))= σj,n(In−I∗n)(σj,nQn−σj,nQn)=0; |
(B4): All the functions
Let us finally define the weight matrix
M=[β1S∗I∗1β2S∗I∗2β3S∗I∗3β4S∗I∗4β5S∗I∗5θ1I∗100000θ2I∗200ξI∗500θ3I∗3000δ2I∗2δ3I∗3δ4I∗40]. | (38) |
As the the weighted graph (
On the basis of the properties given above, Theorems 4.1 and 5.1 in [18] hold in our case, guaranteeing that the disease-free equilibrium is globally asymptotically stable for
However, for the completeness of our study, we report here some details of the proof of Theorem 5.2 given in Section 5.1. As suggested in [18], we consider the following general Lyapunov function
L(S,I1,…,I5)=c1∫SS∗φ(τ)−φ(S∗)φ(τ)dτ+5∑n=1cn∫InI∗nψ(τ)−ψ(I∗n)ψ(τ)dτ. | (39) |
Recalling that in our case the removal rates
L(M)=diag(5∑n=1m1,n,…,5∑n=1m5,n)−M=[5∑n=2βnS∗I∗n−β2S∗I∗2−β3S∗I∗3−β4S∗I∗4−β5S∗I∗5−θ1I∗1θ1I∗10000−θ2I∗2θ2I∗2+ξI∗50−ξI∗500−θ3I∗3θ3I∗300−δ2I∗2−δ3I∗3−δ4I∗44∑n=2δnI∗n]. | (40) |
It can be easily verified that the five cofactors of
˙L(S,I1,…,I5)=T′(S,I1,…,I5)+T′′(S,I1,…,I5), | (41) |
where
T′(S,I1,…,I5)=c1((μS∗+B1)(2−s−1s)+B2(3−si2i1−1s−i1i2)), | (42) |
and
T′′(S,I1,…,I5)=c15∑n=3Bn(3−sini1−1s−i1i2−i2+in)+c3(θ2I∗2(1−i2i3−i3+i2)+ξI∗5(1−i5i3−i3+i5))+c4(θ3I∗3(1−i3i4−i4+i3))+c5(δ2I∗2(1−i2i5−i5+i2)+δ3I∗3(1−i3i5−i5+i3)+δ4I∗4(1−i4i5−i5+i4)). | (43) |
Since from the arithmetic-mean/geometric-mean inequality we have
T′′(S,I1,…,I5)=B3(Θ1Θ3(Θ24∑n=2Δn(4−si3i1−1s−i1i2−i2i3)+Ξ5Δ2(5−si3i1−1s−i1i2−i5i3−i2i5)+Ξ5Δ3(2−i5i3−i3i5)+Ξ5Δ4(3−i5i3−i3i4−i4i5)))+B4(Θ1Θ3(Θ24∑n=2Δn(5−si4i1−1s−i1i2−i2i3−i3i4)+Ξ5Δ2(6−si4i1−1s−i1i2−i5i3−i3i4−i2i5)+Ξ5Δ3(2−i5i3−i3i5)+Ξ5Δ4(3−i5i3−i3i4−i4i5)))+B5(Θ1Θ3(Θ2Δ2(4−si5i1−1s−i1i2−i2i5)+Θ2Δ3(5−si5i1−1s−i1i2−i2i3−i3i5)+Θ2Δ4(6−si5i1−1s−i1i2−i2i3−i3i4−i4i5)+Ξ5Δ2(4−si5i1−1s−i1i2−i2i5)+ |
+Ξ5Δ3(2−i5i3−i3i5)+Ξ5Δ4(3−i5i3−i3i4−i4i5)). | (44) |
From 44 it is easy to deduce that
Finally, in order to prove the asymptotic stability of
S=S∗,in=λ, n=1,…,5, | (45) |
where
0=Λ−μS∗−λ5∑n=1βnI∗nS∗. | (46) |
Since the same equation holds for the endemic equilibrium with
[1] | Han JC, Dutta S, Ekkad S (2013) Gas turbine heat transfer and cooling technology. 2nd Edition, CRC press, 887. https://doi.org/10.1201/b13616 |
[2] |
Xu L, Sun Z, Ruan Q, et al. (2023) Development trend of cooling technology for turbine blades at super-high temperature of above 2000 K. Energies 16: 668. https://doi.org/10.3390/en16020668 doi: 10.3390/en16020668
![]() |
[3] |
Fujita D, Miyazaki T (2024) Techno-economic analysis on the balance of plant (BOP) equipment due to switching fuel from natural gas to hydrogen in gas turbine power plants. AIMS Energy 12: 464–480. https://doi.org/10.3934/energy.2024021 doi: 10.3934/energy.2024021
![]() |
[4] |
Han JC (2018) Advanced cooling in gas turbines 2016 Max jakob memorial award paper. J Heat Transfer, 140. https://doi.org/10.1115/1.4039644 doi: 10.1115/1.4039644
![]() |
[5] |
Zhang T, Zhang Y, Katterbauer K, et al. (2024) Deep learning-assisted phase equilibrium analysis for producing natural hydrogen. Int J Hydrogen Energy 50: 473–486. https://doi.org/10.1016/j.ijhydene.2023.09.097 doi: 10.1016/j.ijhydene.2023.09.097
![]() |
[6] |
Qian X, Yan P, Wang X, et al. (2023) Effect of thermal barrier coatings and integrated cooling on the conjugate heat transfer and thermal stress distribution of nickel-based superalloy turbine vanes. Energy 277: 127774. https://doi.org/10.1016/j.energy.2023.127774 doi: 10.1016/j.energy.2023.127774
![]() |
[7] |
Niu JJ, Liu CL, Fu S, et al. (2022) Experiment investigation of impingement/effusion cooling on overall cooling effectiveness and temperature gradients of afterburner heat shields in a high-performance aircraft engine. Exp Therm Fluid Sci 139: 110698. https://doi.org/10.1016/j.expthermflusci.2022.110698 doi: 10.1016/j.expthermflusci.2022.110698
![]() |
[8] |
Denton JD (1993) The 1993 IGTI scholar lecture: Loss mechanisms in turbomachines. J Turbomach 115: 621–656. https://doi.org/10.1115/1.2929299 doi: 10.1115/1.2929299
![]() |
[9] | Wassell AB, Bhangu JK (2015) The development and application of improved combustor wall cooling techniques. Proceedings of the ASME 1980 International Gas Turbine Conference and Products Show, 1A: General. New Orleans, Louisiana, USA. March 10–13, 1980. https://doi.org/10.1115/80-GT-66 |
[10] |
Liu Y, Sun X, Sethi V, et al. (2017) Review of modern low emissions combustion technologies for aero gas turbine engines. Progress Aerospace Sci 94: 12–45. https://doi.org/10.1016/j.paerosci.2017.08.001 doi: 10.1016/j.paerosci.2017.08.001
![]() |
[11] |
Azad GS, Huang Y, Han JC (2000) Impingement heat transfer on dimpled surfaces using a transient liquid crystal technique. J Therm Heat Transfer 14: 186–193. https://doi.org/10.2514/2.6530 doi: 10.2514/2.6530
![]() |
[12] |
Chyu MK, Siw SC (2013) Recent Advances of internal cooling techniques for gas turbine airfoils. J Therm Sci Eng Appl 5: 021008. https://doi.org/10.1115/1.4023829 doi: 10.1115/1.4023829
![]() |
[13] |
Wei C, Vasquez Diaz GA, Wang K, et al. (2020) 3D-printed tubes with complex internal fins for heat transfer enhancement—CFD analysis and performance evaluation. AIMS Energy 8: 27–47. https://doi.org/10.3934/energy.2020.1.27 doi: 10.3934/energy.2020.1.27
![]() |
[14] |
Yeranee K, Rao Y (2021) A review of recent studies on rotating internal cooling for gas turbine blades. Chinese J Aeronaut 34: 85–113. https://doi.org/10.1016/j.cja.2020.12.035 doi: 10.1016/j.cja.2020.12.035
![]() |
[15] |
Bunker RS (2010) Film cooling: Breaking the limits of diffusion shaped holes. Heat Transfer Res 41: 627–650. http://dx.doi.org/10.1615/HeatTransRes.v41.i6.40 doi: 10.1615/HeatTransRes.v41.i6.40
![]() |
[16] |
Zhang J, Zhang S, Wang C, et al. (2020) Recent advances in film cooling enhancement: A review. Chinese J Aeronaut 33: 1119–1136. https://doi.org/10.1016/j.cja.2019.12.023 doi: 10.1016/j.cja.2019.12.023
![]() |
[17] |
He Z, Huang T, Bao Z, et al. (2024) Research on optimization of combustor liner structure based on arc-shaped slot hole. Open Physic 22: 20240072. https://doi.org/10.1515/phys-2024-0072 doi: 10.1515/phys-2024-0072
![]() |
[18] |
Dutta S, Kaur I, Singh P (2022) Review of film cooling in gas turbines with an emphasis on additive manufacturing-based design evolutions. Energies 15: 6968. https://doi.org/10.3390/en15196968 doi: 10.3390/en15196968
![]() |
[19] |
Panda RK, Pujari AK, Gudla B (2024) Flow structure comparison of film cooling versus hybrid cooling: A CFD study. Int J Turbo Jet-Engines 41: 227–240. https://doi.org/10.1515/tjj-2022-0058 doi: 10.1515/tjj-2022-0058
![]() |
[20] |
Wang L, Lv C, Mao J, et al. (2024) Influence mechanism of impingement and film on the flow and heat transfer of turbine outer ring with composite cooling structure under different operating parameters. Appl Therm Eng 246: 122883. https://doi.org/10.1016/j.applthermaleng.2024.122883 doi: 10.1016/j.applthermaleng.2024.122883
![]() |
[21] |
Li W, Lu X, Li X, et al. (2019) On improving full-coverage effusion cooling efficiency by varying cooling arrangements and wall thickness in double wall cooling application. J Heat Transfer 141: 042201. https://doi.org/10.1115/1.4042772 doi: 10.1115/1.4042772
![]() |
[22] | Colladay RS (1972) Analysis and comparison of wall cooling schemes for advanced gas turbine applications. Washington, D.C., National Aeronautics and Space Administration. http://catalog.hathitrust.org/Record/011445003 |
[23] |
Nealy DA, Reider SB (1980) Evaluation of laminated porous wall materials for combustor liner cooling. J Eng Power 102: 268–276. https://doi.org/10.1115/1.3230247 doi: 10.1115/1.3230247
![]() |
[24] | Hess WG (1979) Laminated turbine vane design and fabrication. No. FR-11662. Available from: https://ntrs.nasa.gov/citations/19790025033. |
[25] |
Ashmole P (1983) Introducing the Rolls-Royce tay. 19th Joint Propulsion Conference, 1377. https://doi.org/10.2514/6.1983-1377 doi: 10.2514/6.1983-1377
![]() |
[26] | Mongia H, Reider S (1985) Allison combustion research and development activities. AIAA/SAE/ASME/ASEE 21st Joint Propulsion Conference. Available from: https://jglobal.jst.go.jp/en/detail?JGLOBAL_ID = 200902092009449055. |
[27] |
Bunker RS (2013) Gas turbine cooling: Moving from macro to micro cooling. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition: V03CT14A002. https://doi.org/10.1115/GT2013-94277 doi: 10.1115/GT2013-94277
![]() |
[28] |
Bunker RS (2017) Evolution of turbine cooling. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition: V001T51A001. https://doi.org/10.1115/GT2017-63205 doi: 10.1115/GT2017-63205
![]() |
[29] |
Kim I, Jin H, Ri K, et al. (2024) Design methodology for combustor in advanced gas turbine engines: A review. Aircr Eng Aerosp Technol 96: 285–296. https://doi.org/10.1108/aeat-12-2022-0351 doi: 10.1108/aeat-12-2022-0351
![]() |
[30] |
Zhang G, Zhu R, Xie G, et al. (2022) Optimization of cooling structures in gas turbines: A review. Chinese J Aeronaut 35: 18–46. https://doi.org/10.1016/j.cja.2021.08.029 doi: 10.1016/j.cja.2021.08.029
![]() |
[31] |
Xu L, Jin S, Ye W, et al. (2024) A review of machine learning methods in turbine cooling optimization. Energies 17: 3177. https://doi.org/10.3390/en17133177 doi: 10.3390/en17133177
![]() |
[32] |
Zhu XD, Zhang JZ, Tan XM (2019) Numerical assessment of round-to-slot film cooling performances on a turbine blade under engine representative conditions. Int Commun Heat Mass Transfer 100: 98–110. https://doi.org/10.1016/j.icheatmasstransfer.2018.12.008 doi: 10.1016/j.icheatmasstransfer.2018.12.008
![]() |
[33] |
Wang J, Lv X, Liu Q, et al. (2009) An experimental investigation on cooling performance of a laminated configuration using infrared thermal image technique. ASME Turbo Expo 2009: Power Land Sea Air, 765–771. https://doi.org/10.1115/GT2009-59838 doi: 10.1115/GT2009-59838
![]() |
[34] |
Wang W, Pu J, Wang JH, et al. (2019) An experimental investigation on cooling characteristics of a vane laminated end-wall with axial-row layout of film-holes. Appl Therm Eng 148: 953–962. https://doi.org/10.1016/j.applthermaleng.2018.11.104 doi: 10.1016/j.applthermaleng.2018.11.104
![]() |
[35] |
Aga V, Mansour M, Abhari RS (2009) Aerothermal performance of streamwise and compound angled pulsating film cooling jets. J Turbomach 131: 041015. https://doi.org/10.1115/1.3072489 doi: 10.1115/1.3072489
![]() |
[36] |
Zhang R, Luo C, Zhou L, et al. (2022) Impingement/film cooling of C3X vane with double-wall cooling structure using air/mist mixture. Int J Heat Mass Transfer 188: 122594. https://doi.org/10.1016/j.ijheatmasstransfer.2022.122594 doi: 10.1016/j.ijheatmasstransfer.2022.122594
![]() |
[37] |
Bunker RS, Bailey JC (2001) Film cooling discharge coefficient measurements in a turbulated passage with internal crossflow. J Turbomach 123: 774–780. https://doi.org/10.1115/1.1397307 doi: 10.1115/1.1397307
![]() |
[38] |
Ji Y, Singh P, Ekkad SV, et al. (2017) Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition. Numer Heat Transfer Part A 72: 579–599. https://doi.org/10.1080/10407782.2017.1394136 doi: 10.1080/10407782.2017.1394136
![]() |
[39] |
Zhou J, Tian J, Lv H, et al. (2022) Numerical investigation on flow and heat transfer characteristics of single row jet impingement cooling with varying jet diameter. Int J Therm Sci 179: 107710. https://doi.org/10.1016/j.ijthermalsci.2022.107710 doi: 10.1016/j.ijthermalsci.2022.107710
![]() |
[40] |
Yao R, Liu T, Huang X, et al. (2023) Multi-objective design of laminated cooling configuration applied in gas turbine based on fuzzy grey relational analysis. Int J Heat Mass Transfer 207: 124035. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124035 doi: 10.1016/j.ijheatmasstransfer.2023.124035
![]() |
[41] |
Sweeney PC, Rhodes JF (1999) An infrared technique for evaluating turbine airfoil cooling designs. J Turbomach 122: 170–177. https://doi.org/10.1115/1.555438 doi: 10.1115/1.555438
![]() |
[42] |
Nakamata C, Mimura F, Matsushita M, et al. (2007) Local cooling effectiveness distribution of an integrated impingement and pin fin cooling configuration. Proc ASME Turbo Expo 2007: Power Land Sea Air 4: 23–34. https://doi.org/10.1115/GT2007-27020 doi: 10.1115/GT2007-27020
![]() |
[43] |
Wang JH, Xu HZ, Liu YL, et al. (2008) Experimental and numerical investigations on turbine airfoil cooling designs: Part Ⅰ—An investigation on flow features by particle image velocimetry. ASME Turbo Expo 2008: Power Land Sea Air 4: 635–641. https://doi.org/10.1115/GT2008-50673 doi: 10.1115/GT2008-50673
![]() |
[44] |
Kim SH, Ahn KH, Jung EY, et al. (2014) Total cooling effectiveness on laminated multilayer for impingement/effusion cooling system. ASME Turbo Expo 2014: Turbine Tech Conf Exposition 5B: V05BT13A050. https://doi.org/10.1115/GT2014-26692 doi: 10.1115/GT2014-26692
![]() |
[45] |
Wang W, Pu J, Yuan RM, et al. (2017) An experimental investigation on the overall cooling performances of two turbine end-wall structures. Proc ASME Turbo Expo 2017: Turbomachinery Tech Conf Exposition 5C: V05CT19A005. https://doi.org/10.1115/GT2017-63226 doi: 10.1115/GT2017-63226
![]() |
[46] |
Pu J, Wang W, Wang JH, et al. (2020) Experimental study of free-stream turbulence intensity effect on overall cooling performances and solid thermal deformations of vane laminated end-walls with various internal pin–fin configurations. Appl Therm Eng 173: 115232. https://doi.org/10.1016/j.applthermaleng.2020.115232 doi: 10.1016/j.applthermaleng.2020.115232
![]() |
[47] |
Pu J, Zhang T, Wang JH (2022) Experimental study of cooling air effect on overall cooling of laminated configuration at a turbine vane end-wall. Case Studies Therm Eng 32: 101890. https://doi.org/10.1016/j.csite.2022.101890 doi: 10.1016/j.csite.2022.101890
![]() |
[48] |
Bai N, Fan W, Zhu J, et al. (2023) Experimental investigations into the effusion plate wall temperature of impingement/effusion cooling systems for gas turbine combustors. Aerosp Sci Technol 132: 108052. https://doi.org/10.1016/j.ast.2022.108052 doi: 10.1016/j.ast.2022.108052
![]() |
[49] |
Funazaki K, Tarukawa Y, Kudo T, et al. (2001) Heat transfer characteristics of an integrated cooling configuration for ultra-high temperature turbine blades: Experimental and numerical investigations. Proc ASME Turbo Expo 2001: Power Land Sea Air 3: V003T01A031. https://doi.org/10.1115/2001-GT-0148 doi: 10.1115/2001-GT-0148
![]() |
[50] |
Manzhao K, Huiren Z, Songling L, et al. (2008) Internal heat transfer characteristics of lamilloy configurations. Chinese J Aeronaut 21: 28–34. https://doi.org/10.1016/S1000-9361(08)60004-7 doi: 10.1016/S1000-9361(08)60004-7
![]() |
[51] |
Terzis A, Ott P, Cochet M, et al. (2014) Effect of varying jet diameter on the heat transfer distributions of narrow impingement channels. J Turbomach 137: 021004. https://doi.org/10.1115/1.4028294 doi: 10.1115/1.4028294
![]() |
[52] |
Zhang W, Zhu H, Li G, et al. (2016) Experimental investigation on flow resistance and heat transfer coefficient of internal lamilloy. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition V05BT16A001. https://doi.org/10.1115/GT2016-56105 doi: 10.1115/GT2016-56105
![]() |
[53] | Batchelor GK (2000) An introduction to fluid dynamics. Cambridge University Press, 131–173. https://doi.org/10.1017/CBO9780511800955 |
[54] |
Moin P, Mahesh K (1998) Direct numerical simulation: a tool in turbulence research. Annu Rev Fluid Mech 30: 539–578. https://doi.org/10.1146/annurev.fluid.30.1.539 doi: 10.1146/annurev.fluid.30.1.539
![]() |
[55] | Wilcox DC (2006) Turbulence modeling for CFD. La Canada, CA: DCW industries, (third edition), 73–135. Avaiable from: https://www.amazon.com/Turbulence-Modeling-CFD-ThirdEdition/dp/1928729088. |
[56] |
Fureby C, Grinstein FF (2002) Large eddy simulation of high-reynolds-number free and wall-bounded flows. J Comput Phys 181: 68–97. https://doi.org/10.1006/jcph.2002.7119 doi: 10.1006/jcph.2002.7119
![]() |
[57] |
Chaouat B (2017) The state of the art of hybrid rans/les modeling for the simulation of turbulent flows. Flow Turbul Combust 99: 279–327. https://doi.org/10.1007/s10494-017-9828-8 doi: 10.1007/s10494-017-9828-8
![]() |
[58] |
Gong C, Zhao S, Chen W, et al. (2023) Numerical study on the combustion process in a gas turbine combustor with different reference velocities. Adv Aerodyn 5: 24. https://doi.org/10.1186/s42774-023-00154-0 doi: 10.1186/s42774-023-00154-0
![]() |
[59] |
Funazaki K, Hachiya K (2003) Systematic numerical studies on heat transfer and aerodynamic characteristics of impingement cooling devices combined with pins. ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference 5: 185–192. https://doi.org/10.1115/GT2003-38256 doi: 10.1115/GT2003-38256
![]() |
[60] |
Funazaki KI, Bin Salleh H (2008) Extensive studies on internal and external heat transfer characteristics of integrated impingement cooling structures for hp turbines. ASME Turbo Expo 2008: Power Land Sea Air 4: 167–176. https://doi.org/10.1115/GT2008-50202 doi: 10.1115/GT2008-50202
![]() |
[61] |
Panda RK, Prasad BVSSS (2012) Conjugate heat transfer from a flat plate with combined impingement and film cooling. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. 4: 347–356. https://doi.org/10.1115/GT2012-68830 doi: 10.1115/GT2012-68830
![]() |
[62] |
Gao W, Li H, Li L, et al. (2021) Numerical simulation of broken pin effects on the flow field and cooling performance of a double-wall cooling configuration. Chinese J Aeronaut 34: 358–375. https://doi.org/10.1016/j.cja.2020.09.014 doi: 10.1016/j.cja.2020.09.014
![]() |
[63] |
Nakamata C, Okita Y, Matsuno S, et al. (2005) Spatial arrangement dependance of cooling performance of an integrated impingement and pin fin cooling configuration. ASME Turbo Expo 2005: Power Land Sea Air 3: 385–395. https://doi.org/10.1115/GT2005-68348 doi: 10.1115/GT2005-68348
![]() |
[64] |
Rao Y, Liu Y, Wan C (2018) Multiple-jet impingement heat transfer in double-wall cooling structures with pin fins and effusion holes. Int J Therm Sci 133: 106–119. https://doi.org/10.1016/j.ijthermalsci.2018.07.021 doi: 10.1016/j.ijthermalsci.2018.07.021
![]() |
[65] |
Bohn DE, Tu¨mmers C (2003) Numerical 3-D conjugate flow and heat transfer investigation of a transonic convection-cooled thermal barrier coated turbine guide vane with reduced cooling fluid mass flow. Proc ASME Turbo Expo 2003, Collocated 2003 Int Joint Power Gener Conf 5: 279–286. https://doi.org/10.1115/GT2003-38431 doi: 10.1115/GT2003-38431
![]() |
[66] |
Zhou W, Deng Q, Feng Z (2016) Conjugate heat transfer analysis for laminated cooling effectiveness: Part A—Effects of surface curvature. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition 5A: V05AT10A008. https://doi.org/10.1115/GT2016-57243 doi: 10.1115/GT2016-57243
![]() |
[67] |
Deng Q, Zhou W, Feng Z (2016) Conjugate heat transfer analysis for laminated cooling effectiveness: Part B—Effects of film hole incline angle. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition 5A: V05AT10A009. https://doi.org/10.1115/GT2016-57256 doi: 10.1115/GT2016-57256
![]() |
[68] |
Yang X, Liu Z, Zhao Q, et al. (2019) Conjugate heat transfer measurements and predictions for the vane endwall of a high-pressure turbine with upstream purge flow. Int J Heat Mass Transfer 140: 634–647. https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.030 doi: 10.1016/j.ijheatmasstransfer.2019.06.030
![]() |
[69] |
He J, Deng Q, Feng Z (2021) Conjugate heat transfer characteristics of double wall cooling with gradient diameter of film and impingement holes. Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition 5A: V05AT12A017. https://doi.org/10.1115/GT2021-59423 doi: 10.1115/GT2021-59423
![]() |
[70] |
Skamniotis C, Courtis M, Cocks ACF (2021) Multiscale analysis of thermomechanical stresses in double wall transpiration cooling systems for gas turbine blades. Int J Mech Sci 207: 106657. https://doi.org/10.1016/j.ijmecsci.2021.106657 doi: 10.1016/j.ijmecsci.2021.106657
![]() |
[71] |
Zhang D, Liu H, Chen P, et al. (2024) Numerical analysis on multiple parameters for overall cooling effectiveness of impingement effusion cooling with low Reynolds number. Int Commun Heat Mass Transfer 153: 107366. https://doi.org/10.1016/j.icheatmasstransfer.2024.107366 doi: 10.1016/j.icheatmasstransfer.2024.107366
![]() |
[72] |
Yeranee K, Rao Y, Xu C, et al. (2024) Conjugate heat transfer and fluid flow analysis on printable double-wall effusion cooling with internal topology-optimized TPMS structures. Therm Sci Eng Progress 55: 102939. https://doi.org/10.1016/j.tsep.2024.102939 doi: 10.1016/j.tsep.2024.102939
![]() |
[73] |
Yeranee K, Rao Y, Zuo Q, et al. (2024) Thermal performance enhancement for gas turbine blade trailing edge cooling with topology-optimized printable diamond TPMS lattice. Int J Heat Fluid Flow 110: 109649. https://doi.org/10.1016/j.ijheatfluidflow.2024.109649 doi: 10.1016/j.ijheatfluidflow.2024.109649
![]() |
[74] |
Zhang XD, Liu JJ, An BT (2016) The influences of element layout and coolant ejection angle on overall cooling effectiveness of laminated cooling configuration. Int J Heat Mass Transfer 101: 988–991. https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.104 doi: 10.1016/j.ijheatmasstransfer.2016.04.104
![]() |
[75] |
Song W, Xu H, Cheng X, et al. (2019) Numerical investigation on cooling air flow and resistance characteristics inner laminated cooling structures. Proceedings of the ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition 5A: V05AT10A012. https://doi.org/10.1115/GT2019-92025 doi: 10.1115/GT2019-92025
![]() |
[76] |
Liu R, Li H, You R, et al. (2022) Multi-parameters sensitivity analysis of overall cooling effectiveness on turbine blade and numerical investigation of internal cooling structures on heat transfer. Proc ASME Turbo Expo 2022: Turbomachinery Tech Conf Exposition 6A: V06AT12A026. https://doi.org/10.1115/GT2022-82372 doi: 10.1115/GT2022-82372
![]() |
[77] |
Song W, Yao R, Wang J, et al. (2023) Transient film outflow performances of laminated cooling configurations in leading edges of turbine vane. Appl Therm Eng 233: 121209. https://doi.org/10.1016/j.applthermaleng.2023.121209 doi: 10.1016/j.applthermaleng.2023.121209
![]() |
[78] |
Tagawa GBS, Morency F, Beaugendre H (2021) CFD investigation on the maximum lift coefficient degradation of rough airfoils. AIMS Energy 9: 305–325. https://doi.org/10.3934/energy.2021016 doi: 10.3934/energy.2021016
![]() |
[79] |
Lei L, Wang C, Wang L, et al. (2015) Computational investigation of dimple effects on heat transfer and friction factor in a Lamilloy cooling structure. J Enhanced Heat Transfer 22: 147–175. https://doi.org/10.1615/JENHHEATTRANSF.2015013956 doi: 10.1615/JENHHEATTRANSF.2015013956
![]() |
[80] |
Luo L, Wang C, Wang L, et al. (2016) A numerical investigation of dimple effects on internal heat transfer enhancement of a double wall cooling structure with jet impingement. Int J Numer Methods Heat Fluid Flow 26: 2175–2197. https://doi.org/10.1108/HFF-02-2015-0081 doi: 10.1108/HFF-02-2015-0081
![]() |
[81] |
Wang XY, Liu CL, Zhu HR, et al. (2024) Investigation on cooling characteristic of the novel double-wall with the hollow pin fin. Int J Therm Sci 195: 108647. https://doi.org/10.1016/j.ijthermalsci.2023.108647 doi: 10.1016/j.ijthermalsci.2023.108647
![]() |
[82] |
Li H, Xie F, Wang Y, et al. (2022) Numerical investigation on the cooling effectiveness and pressure loss of a novel laminated cooling configuration with cellular partition. J Therm Sci Eng Appl 15: 011015. https://doi.org/10.1115/1.4055744 doi: 10.1115/1.4055744
![]() |
[83] |
Chen Z, Chen X, Yang X, et al. (2024) Numerical study on cooling characteristics of turbine blade based on laminated cooling configuration with clapboards. Energy 299: 131372. https://doi.org/10.1016/j.energy.2024.131372 doi: 10.1016/j.energy.2024.131372
![]() |
[84] |
Gu H, Liang D, Duan P, et al. (2023) Aerothermal characteristics of thin double-wall effusion cooling systems with novel slot holes and cellular architectures for gas turbines. Aerospace Sci Technol 140: 108441. https://doi.org/10.1016/j.ast.2023.108441 doi: 10.1016/j.ast.2023.108441
![]() |
[85] |
Bang M, Kim S, Park HS, et al. (2021) Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing: Effect of channel gap height. Int J Heat Mass Transfer 175: 121420. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121420 doi: 10.1016/j.ijheatmasstransfer.2021.121420
![]() |
[86] |
Skamniotis C, Cocks ACF (2021) 2D and 3D thermoelastic phenomena in double wall transpiration cooling systems for gas turbine blades and hypersonic flight. Aerospace Sci Technol 113: 106610. https://doi.org/10.1016/j.ast.2021.106610 doi: 10.1016/j.ast.2021.106610
![]() |
[87] |
Lv Y, Liu T, Huang X, et al. (2022) Numerical investigation and optimization of flat plate transpiration-film combined cooling structure. Int J Therm Sci 179: 107673. https://doi.org/10.1016/j.ijthermalsci.2022.107673 doi: 10.1016/j.ijthermalsci.2022.107673
![]() |
[88] |
Haven BA, Kurosaka M (1997) Kidney and anti-kidney vortices in crossflow jets. J Fluid Mechanics 352: 27–64. https://doi.org/10.1017/S0022112097007271 doi: 10.1017/S0022112097007271
![]() |
[89] |
Baldauf S, Scheurlen M, Schulz A, et al. (2002) Correlation of film-cooling effectiveness from thermographic measurements at enginelike conditions. J Turbomach 124: 686–698. https://doi.org/10.1115/1.1504443 doi: 10.1115/1.1504443
![]() |
[90] |
Li W, Li X, Ren J, et al. (2018) Length to diameter ratio effect on heat transfer performance of simple and compound angle holes in thin-wall airfoil cooling. Int J Heat Mass Transfer 127: 867–879. https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.086 doi: 10.1016/j.ijheatmasstransfer.2018.08.086
![]() |
[91] |
Li W, Lu X, Li X, et al. (2018) High resolution measurements of film cooling performance of simple and compound angle cylindrical holes with varying hole length-to-diameter ratio—Part Ⅰ: Adiabatic film effectiveness. Int J Therm Sci 124: 146–161. https://doi.org/10.1016/j.ijthermalsci.2017.10.013 doi: 10.1016/j.ijthermalsci.2017.10.013
![]() |
[92] |
Ignatious I, Janardanan Sarasamma J (2015) Numerical analysis of impingement/effusion cooling effectiveness on flat plates. Proceedings of the ASME 2015 Gas Turbine India Conference. ASME 2015 Gas Turbine India Conference: V001T04A004. https://doi.org/10.1115/GTINDIA2015-1319 doi: 10.1115/GTINDIA2015-1319
![]() |
[93] |
Burd SW, Kaszeta RW, Simon TW (1998) Measurements in film cooling flows: Hole L/D and turbulence intensity effects. J Turbomach 120: 791–798. https://doi.org/10.1115/1.2841791 doi: 10.1115/1.2841791
![]() |
[94] |
Lutum E, Johnson BV (1999) Influence of the hole length-to-diameter ratio on film cooling with cylindrical holes. J Turbomach 121: 209–216. https://doi.org/10.1115/1.2841303 doi: 10.1115/1.2841303
![]() |
[95] |
Li X, He Y, Mao R, et al. (2014) Experimental investigations on cooling hole diameters of an impingement-effusion cooling system. Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition 5B: V05BT14A016. https://doi.org/10.1115/GT2014-26521 doi: 10.1115/GT2014-26521
![]() |
[96] |
Zhou W, Deng Q, He W, et al. (2017) Effects of hole pitch to diameter ratio P/D of impingement and film hole on laminated cooling effectiveness. Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 5A: V05AT10A005. https://doi.org/10.1115/GT2017-64566 doi: 10.1115/GT2017-64566
![]() |
[97] |
Liu Y, Rao Y, Yang L (2020) Numerical simulations of a double-wall cooling with internal jet impingement and external hexagonal arrangement of film cooling holes. Int J Therm Sci 153: 106337. https://doi.org/10.1016/j.ijthermalsci.2020.106337 doi: 10.1016/j.ijthermalsci.2020.106337
![]() |
[98] |
Li H, Li L, Li Q, et al. (2023) Coupling characteristics and simplification analysis method of laminated cooling configuration between external and internal cooling. Int J Therm Sci 187: 108159. https://doi.org/10.1016/j.ijthermalsci.2023.108159 doi: 10.1016/j.ijthermalsci.2023.108159
![]() |
[99] |
Viskanta R (1993) Heat transfer to impinging isothermal gas and flame jets. Exp Therm Fluid Sci 6: 111–134. https://doi.org/10.1016/0894-1777(93)90022-B doi: 10.1016/0894-1777(93)90022-B
![]() |
[100] |
Wang C, Wang C, Zhang J (2021) Parametric studies of laminated cooling configurations: Overall cooling effectiveness. Int J Aerosp Eng 2021: 6656804. https://doi.org/10.1155/2021/6656804 doi: 10.1155/2021/6656804
![]() |
[101] |
Wang C, Zhang X, Hu K, et al. (2023) Geometric-parameter influence and orthogonal evaluation on the thermal environment for an impinging jet ventilation system inlet. Case Stud Therm Eng 51: 103573. https://doi.org/10.1016/j.csite.2023.103573 doi: 10.1016/j.csite.2023.103573
![]() |
[102] |
Xu F, Pan Z, Wu H (2017) Experimental investigation on the flow transition in different pin-fin arranged microchannels. Microfluid Nanofluid 22: 11. https://doi.org/10.1007/s10404-017-2030-4 doi: 10.1007/s10404-017-2030-4
![]() |
[103] |
Bianchini C, Facchini B, Simonetti F, et al. (2010) Numerical and experimental investigation of turning flow effects on innovative pin fin arrangements for trailing edge cooling configurations. Proc ASME Turbo Expo 2010: Power Land Sea Air 4: 593–604. https://doi.org/10.1115/GT2010-23536 doi: 10.1115/GT2010-23536
![]() |
[104] |
Abuşka M, Çorumlu V (2023) A comparative experimental thermal performance analysis of conical pin fin heat sink with staggered and modified staggered layout under forced convection. Therm Sci Eng Prog 37: 101560. https://doi.org/10.1016/j.tsep.2022.101560 doi: 10.1016/j.tsep.2022.101560
![]() |
[105] |
Bahiraei M, Mazaheri N, Daneshyar MR (2021) Employing elliptical pin-fins and nanofluid within a heat sink for cooling of electronic chips regarding energy efficiency perspective. Appl Therm Eng 183: 116159. https://doi.org/10.1016/j.applthermaleng.2020.116159 doi: 10.1016/j.applthermaleng.2020.116159
![]() |
[106] |
Ostanek JK, Thole KA (2013) Effects of non-uniform streamwise spacing in low aspect ratio pin fin arrays. Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition 3A: V03AT12A050. https://doi.org/10.1115/GT2013-95889 doi: 10.1115/GT2013-95889
![]() |
[107] |
Metzger DE, Berry RA, Bronson JP (1982) Developing heat transfer in rectangular ducts with staggered arrays of short pin fins. J Heat Transfer 104: 700–706. https://doi.org/10.1115/1.3245188 doi: 10.1115/1.3245188
![]() |
[108] |
VanFossen GJ (1982) Heat-transfer coefficients for staggered arrays of short pin fins. J Eng Power 104: 268–274. https://doi.org/10.1115/1.3227275 doi: 10.1115/1.3227275
![]() |
[109] |
Zhang J, Han HZ, Li ZR, et al. (2021) Effect of pin-fin forms on flow and cooling characteristics of three-layer porous laminate. Appl Therm Eng 194: 117084. https://doi.org/10.1016/j.applthermaleng.2021.117084 doi: 10.1016/j.applthermaleng.2021.117084
![]() |
[110] |
Luo L, Yan H, Du W, et al. (2022) Numerical study of a novel curved pin fin for heat transfer enhancement within aeroengine turbine blade. Aerosp Sci Technol 123: 107436. https://doi.org/10.1016/j.ast.2022.107436 doi: 10.1016/j.ast.2022.107436
![]() |
[111] |
Zeng L, Deng D, Zhong N, et al. (2021) Thermal and flow performance in microchannel heat sink with open-ring pin fins. Int J Mech Sci 200: 106445. https://doi.org/10.1016/j.ijmecsci.2021.106445 doi: 10.1016/j.ijmecsci.2021.106445
![]() |
[112] |
Ruan Q, Xu L, Xi L, et al. (2023) Cooling performance of droplet-shaped Kagome truss structure combined with jet array impingement composite cooling structure. Case Stud Therm Eng 51: 103558. https://doi.org/10.1016/j.csite.2023.103558 doi: 10.1016/j.csite.2023.103558
![]() |
[113] |
Almansour AS, Morscher GN (2020) Tensile creep behavior of SiCf/SiC ceramic matrix minicomposites. J Eur Ceram Soc 40: 5132–5146. https://doi.org/10.1016/j.jeurceramsoc.2020.07.012 doi: 10.1016/j.jeurceramsoc.2020.07.012
![]() |
[114] |
Vedula V, Shi J, Liu S, et al. (2006) Sector rig test of a ceramic matrix composite (CMC) combustor liner. Proc ASME Turbo Expo 2006: Power Land Sea Air 2: 255–259. https://doi.org/10.1115/GT2006-90341 doi: 10.1115/GT2006-90341
![]() |
[115] |
Sun J (2007) Evaluation of ceramic matrix composites by thermal diffusivity imaging. Int J Appl Ceram Technol 4: 75–87. https://doi.org/10.1111/J.1744-7402.2007.02121.X doi: 10.1111/J.1744-7402.2007.02121.X
![]() |
[116] |
Mensch A, Thole KA, Craven BA (2014) Conjugate heat transfer measurements and predictions of a blade endwall with a thermal barrier coating. J Turbomach 136: 121003. https://doi.org/10.1115/1.4028233 doi: 10.1115/1.4028233
![]() |
[117] |
Pu J, Zhang T, Huang X, et al. (2022) Overall thermal performances of double-wall effusion cooling covered by simulated thermal barrier coatings. J Therm Sci 31: 224–238. https://doi.org/10.1007/s11630-022-1561-5 doi: 10.1007/s11630-022-1561-5
![]() |
[118] |
Huang X, Pu J, Wang JH, et al. (2020) Sensitivity analysis of internal layout and coating thickness to overall cooling performances of laminated cooling configurations with surface thermal barrier coatings. Appl Therm Eng 181: 116020. https://doi.org/10.1016/j.applthermaleng.2020.116020 doi: 10.1016/j.applthermaleng.2020.116020
![]() |
[119] |
Kim KM, Moon H, Park JS, et al. (2014) Optimal design of impinging jets in an impingement/effusion cooling system. Energy 66: 839–848. https://doi.org/10.1016/j.energy.2013.12.024 doi: 10.1016/j.energy.2013.12.024
![]() |
[120] |
Lee KD, Kim KY (2009) Optimization of a cylindrical film cooling hole using surrogate modeling. Numer Heat Transfer Part A 55: 362–380. https://doi.org/10.1080/10407780902720858 doi: 10.1080/10407780902720858
![]() |
[121] |
Mostofizadeh AR, Adami M, Shahdad MH (2018) Multi-objective optimization of 3D film cooling configuration with thermal barrier coating in a high pressure vane based on CFD-ANN-GA loop. J Braz Soc Mech Sci Eng 40: 211. https://doi.org/10.1007/s40430-018-1145-1 doi: 10.1007/s40430-018-1145-1
![]() |
[122] |
Liu R, Li H, You R, et al. (2025) Multi-objective optimization methodology on cooling performance for a novel laminated cooling structure with pin-fins and slot hole. Appl Therm Eng 265: 125621. https://doi.org/10.1016/j.applthermaleng.2025.125621 doi: 10.1016/j.applthermaleng.2025.125621
![]() |
[123] |
Li W, Tan X, Xiao X, et al. (2023) Multiobjective optimization of double-wall cooling structure of integrated strut flame stabilizer and sensitivity analysis of parameters. J Aerosp Eng 36: 04023040. https://doi.org/10.1061/JAEEEZ.ASENG-4525 doi: 10.1061/JAEEEZ.ASENG-4525
![]() |
[124] |
Wang Y, Zhu J, Cheng Z, et al. (2024) Intelligent optimization method for real-time decision-making in laminated cooling configurations through reinforcement learning. Energy 291: 130434. https://doi.org/10.1016/j.energy.2024.130434 doi: 10.1016/j.energy.2024.130434
![]() |
[125] |
Yang L, Min Z, Yue T, et al. (2019) High resolution cooling effectiveness reconstruction of transpiration cooling using convolution modeling method. Int J Heat Mass Transfer 133: 1134–1144. https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.010 doi: 10.1016/j.ijheatmasstransfer.2019.01.010
![]() |
[126] |
Yang L, Wang Q, Huang K, et al. (2020) Establishment of a long-short-term-memory model to predict film cooling effectiveness under superposition conditions. Int J Heat Mass Transfer 160: 120231. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120231 doi: 10.1016/j.ijheatmasstransfer.2020.120231
![]() |
[127] |
Chouchen M, Ouni A, Mkaouer MW, et al. (2020) Recommending peer reviewers in modern code review: a multi-objective search-based approach. Proceedings of the 2020 Genetic and Evolutionary Computation Conference Companion, 307–308. https://doi.org/10.1145/3377929.3390057 doi: 10.1145/3377929.3390057
![]() |
[128] |
Newman MEJ (2005) Power laws, Pareto distributions and Zipf's law. Contemp Physic 46: 323–351. https://doi.org/10.1080/00107510500052444 doi: 10.1080/00107510500052444
![]() |
[129] | Narukawa K (2013) Effect of dominance balance in many-objective optimization. In: Purshouse, R.C., Fleming, P.J., Fonseca, C.M., Greco, S., Shaw, J. (eds) Evolutionary Multi-Criterion Optimization. EMO 2013. Lecture Notes Comput Sci 7811: 276–290. https://doi.org/10.1007/978-3-642-37140-0_23 |
[130] |
Balaji V, Narendranath S (2023) MOGA and TOPSIS-based multi-objective optimization of wire EDM process parameters for Ni50.3-Ti29.7-Hf20 alloy. CIRP J Manuf Sci Technol 47: 158–167. https://doi.org/10.1016/j.cirpj.2023.09.005 doi: 10.1016/j.cirpj.2023.09.005
![]() |
[131] |
Liu X, Zhao J, Yu Y, et al. (2024) BIM-based multi-objective optimization of clash resolution: A NSGA-Ⅱ approach. J Build Eng 89: 109228. https://doi.org/10.1016/j.jobe.2024.109228 doi: 10.1016/j.jobe.2024.109228
![]() |
[132] |
Iweh CD, Akupan ER (2023) Control and optimization of a hybrid solar PV-Hydro power system for off-grid applications using particle swarm optimization (PSO) and differential evolution (DE). Energy Rep 10: 4253–4270. https://doi.org/10.1016/j.egyr.2023.10.080 doi: 10.1016/j.egyr.2023.10.080
![]() |
[133] |
Konak A, Coit DW, Smith AE (2006) Multi-objective optimization using genetic algorithms: A tutorial. Reliab Eng Syst Saf 91: 992–1007. https://doi.org/10.1016/j.ress.2005.11.018 doi: 10.1016/j.ress.2005.11.018
![]() |
[134] |
Wang C, Zhang JZ, Wang C, et al. (2020) Multi-optimization of a specific laminated cooling structure for overall cooling effectiveness and pressure drop. Numer Heat Transfer Part A 79: 195–221. https://doi.org/10.1080/10407782.2020.1835105 doi: 10.1080/10407782.2020.1835105
![]() |
[135] |
Ismayilov F, Akturk A, Peles Y (2021) Systematic micro heat sink optimization based on hydrofoil shape pin fins. Case Stud Therm Eng 26: 101028. https://doi.org/10.1016/j.csite.2021.101028 doi: 10.1016/j.csite.2021.101028
![]() |
[136] |
Deb K, Agrawal S, Pratap A, et al. (2002) A fast and elitist multiobjective genetic algorithm: NSGA-Ⅱ. IEEE Trans Evol Comput 6: 182–197. https://doi.org/10.1109/4235.996017 doi: 10.1109/4235.996017
![]() |
[137] |
Moon MA, Kim KY (2014) Analysis and optimization of fan-shaped pin-fin in a rectangular cooling channel. Int J Heat Mass Transfer 72: 148–162. https://doi.org/10.1016/j.ijheatmasstransfer.2013.12.085 doi: 10.1016/j.ijheatmasstransfer.2013.12.085
![]() |
[138] |
Li P, Kim KY (2008) Multiobjective optimization of staggered elliptical pin-fin arrays. Numer Heat Transfer Part A 53: 418–431. https://doi.org/10.1080/10407780701632759 doi: 10.1080/10407780701632759
![]() |
[139] |
Nguyen NP, Maghsoudi E, Roberts SN, et al. (2023) Shape optimization of pin fin array in a cooling channel using genetic algorithm and machine learning. Int J Heat Mass Transfer 202: 123769. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123769 doi: 10.1016/j.ijheatmasstransfer.2022.123769
![]() |
[140] |
Bahman Jahromi H, Kowsary F (2024) A comprehensive parametric study and multi-objective optimization of turbulent jet array impingement for uniform cooling of gas turbine blades with minimized compression power. Int J Therm Sci 201: 109035. https://doi.org/10.1016/j.ijthermalsci.2024.109035 doi: 10.1016/j.ijthermalsci.2024.109035
![]() |
[141] |
Kusterer K, Tekin N, Bohn D, et al. (2012) Experimental and numerical investigations of the nekomimi film cooling technology. Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition 4: 1299–1310. https://doi.org/10.1115/GT2012-68400 doi: 10.1115/GT2012-68400
![]() |
[142] |
Kusterer K, Bohn D, Sugimoto T, et al. (2007) Influence of blowing ratio on the double-jet ejection of cooling air. Proc ASME Turbo Expo 2007: Power Land Sea Air 4: 305–315. https://doi.org/10.1115/GT2007-27301 doi: 10.1115/GT2007-27301
![]() |
Parameters | Value | Source |
[31] | ||
[31] | ||
[31] | ||
[7] | ||
Assumed | ||
Assumed | ||
[34] | ||
[34] | ||
[34,45] | ||
[34,45] | ||
Estimated | ||
[34] | ||
[34] | ||
[34] | ||
[34,6] | ||
δ2 | 1.10·10-19 day-1 | Estimated |
δ3 | 2.27·10-3 day-1 | Estimated |
δ4 | 3.2·10-3 day-1 | Estimated |
Values at January 1st 2025 | |||
0.1 | 0.2 | 0.3 | |
Infected (persons) | | | |
Treated (persons) | | | |
HIV infection rate (persons | 3.85 | 5.794 | 7.816 |
New cases of AIDS (persons | 975.3 | 1062 | 1149 |
AIDS deaths (persons | 557.3 | 606.7 | 656.8 |
Parameters | Value | Source |
[31] | ||
[31] | ||
[31] | ||
[7] | ||
Assumed | ||
Assumed | ||
[34] | ||
[34] | ||
[34,45] | ||
[34,45] | ||
Estimated | ||
[34] | ||
[34] | ||
[34] | ||
[34,6] | ||
δ2 | 1.10·10-19 day-1 | Estimated |
δ3 | 2.27·10-3 day-1 | Estimated |
δ4 | 3.2·10-3 day-1 | Estimated |
Values at January 1st 2025 | |||
0.1 | 0.2 | 0.3 | |
Infected (persons) | | | |
Treated (persons) | | | |
HIV infection rate (persons | 3.85 | 5.794 | 7.816 |
New cases of AIDS (persons | 975.3 | 1062 | 1149 |
AIDS deaths (persons | 557.3 | 606.7 | 656.8 |