Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Crashworthiness response of natural silk-fibre glass hybrid reinforced epoxy cylindrical composite tubes under quasi-static load

1 Department of Mechanical, Energy and Industrial Engineering, Faculty of Engineering, Botswana International University of Science and Technology, Private Bag 16 Palapye, Botswana
2 Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, The National University of Malaysia, UKM, 43600 Bangi, Malaysia

This study investigated the failure behaviour, energy absorption response and load carrying capability of fibre-glass (FG)/natural silk fibre (NS)/epoxy hybrid composite cylindrical tubes subjected to an axial quasi-static compression test. The reinforced cylindrical composite tubes were prepared using mandrel assisted hand lay-up technique. The specimen tested were three (3) fibre-glass cylindrical tube, each consisting of 5 layers of (FG); three (3) natural-silk fibre cylindrical tubes, each consisting of 15 layers NS-fibre and FG/NS/epoxy hybrid cylindrical tubes, each consisting of 3 layers of FG, 9 layers of NS-fibres. The height of each tube was 50 mm; the thickness was 10 mm and the internal diameter was 65 mm. The energy absorption and load carrying ability of the tubes were analyzed by measuring specific energy absorption, maximum peak load (Pmax) and total energy absorption (TE) as a function of diverse fibre fraction under compressive loading. Failure mechanism of the tubes was analyzed from high resolution photographs obtained during test. As expected, FG/NS/epoxy hybrid tubes performed better in load carriability and energy attenuation while NS tubes performed better in progressive crushing failure behaviour. Deformation morphology suggests micro to macro cracks, tear propagation, delamination and collapse.
  Figure/Table
  Supplementary
  Article Metrics

Keywords hybrid composite; energy absorption; crashworthiness; failure mechanism

Citation: Albert Uchenna Ude, Che Husna Azhari. Crashworthiness response of natural silk-fibre glass hybrid reinforced epoxy cylindrical composite tubes under quasi-static load. AIMS Materials Science, 2019, 6(5): 852-863. doi: 10.3934/matersci.2019.5.852

References

  • 1. Ude A, Azhari C (2013) Experimental investigation on the response of woven natural silk fiber/epoxy sndwich composite panels under low velocity impact. Fiber Polym 14: 127-132.    
  • 2. Eshkoor R, Ude A, Oshkovr S, et al. (2014) Failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism. Int J Impact Eng 64: 53-61.    
  • 3. Eshkoor R, Ude A, Sulong A, et al. (2015) Energy absorption and load carrying capability of woven natural silk epoxy-triggered composite tubes. Compos Part B-Eng 77: 10-18.    
  • 4. Ude A, Ariffin A, Azhari C (2013) Impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials. Int J Impact Eng 58: 31-38.    
  • 5. Eshkoor R, Oshkovr S, Sulong A, et al. (2013) Comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes. Mater Design 47: 248-257.    
  • 6. Eshkoor R, Oshkovr S, Sulong A, et al. (2013) Effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes. Compos Part B-Eng 55: 5-10.    
  • 7. Zhou J, Guan Z, Cantwell W (2018) The energy-absorbing behaviour of composite tubereinforced foams. Compos Part B-Eng 139: 227-237.    
  • 8. Alkbir M, Sapuan S, Nuraini A, et al. (2016) Fibre properties and crashworthiness parameters of natural fibre-reinforced composite structure: A literature review. Compos Struct 148: 59-73.    
  • 9. Abdewi EF, Sulaiman S, Hamouda AMS, et al. (2008) Quasi-static axial and lateral crushing of radial corrugated composite tubes. Thin Wall Struct 46: 320-332.    
  • 10. Abosbaia A, Mahdi E, Hamouda A, et al. (2008) Energy absorption capability of laterally loaded segmented composite tubes. Compos Struct 70: 356-373.
  • 11. Duarte I, Vesenjak M, Krstulović-Opara L, et al. (2015) Static and dynamic axial crush performance of in-situ foam-filled tubes. Compos Struct 124: 128-139.    
  • 12. Kim H, Shin D, Lee J, et al. (2014) Crashworthiness of aluminum/CFRP square hollow section beam under axial impact loading for crash box application. Compos Struct 112: 1-10.    
  • 13. Liu Q, Xing H, Ju Y, et al. (2014) Quasi-static axial crushing and transverse bending of double hat shaped CFRP tubes. Compos Struct 117: 1-11.    
  • 14. Mahdi E, Hamouda A, Sen A (2004) Quasi-static crushing behaviour of hybrid and nonhybrid natural fibre composite solid cones. Compos Struct 66: 647-663.    
  • 15. Mamalis A, Manolakos D, Ioannidis M, et al. (2009) On the crashworthiness of composite rectangular thin-walled tubes internally reinforced with aluminium or polymeric foams: Experimental and numerical simulation. Compos Struct 89: 416-423.    
  • 16. Mamalis A, Manolakos D, Ioannidis M, et al. (2005) Crashworthy characteristics of axially statically compressed thin-walled square CFRP composite tubes: experimental. Compos Struct 63: 347-360.
  • 17. Oshkovr S, Eshkoor R, Taher S, et al. (2012) Crashworthiness characteristics investigation of silk/epoxy composite square tubes. Compos Struct 94: 2337-2342.    
  • 18. Striewe J, Reuter C, Sauerland K, et al. (2018) Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin Wall Struct 123: 501-508.    
  • 19. Kathiresan M, Manisekar K (2017) Low velocity axial collapse behavior of E-glass fiber/epoxy composite conical frusta. Compos Struct 166: 1-11.    
  • 20. Zhang Z, Sun W, Zhao Y, et al. (2018) Crashworthiness of different composite tubes by experiments and simulations. Compos Part B-Eng 143: 86-95.    
  • 21. Mamalis A, Manolakos D, Ioannidis M, et al. (2005) On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental. Compos Struct 69: 407-420.    
  • 22. Mamalis A, Robinson M, Manolakos D, et al. (1997) Crashworthy capability of composite material structures. Compos Struct 37: 109-134.    
  • 23. Oshkovr S, Taher S, Oshkour A, et al. (2013) Finite element modelling of axially crushed silk/epoxy composite square tubes. Compos Struct 95: 411-418.    
  • 24. Ude A, Eshkoor R, Azhari C (2017) Crashworthy characteristics of axial quasi-statically compressed Bombyx mori composite cylindrical tubes: experimental. Fiber Polym 18: 1594-1601.    
  • 25. Supian A, Sapuan S, Zuhri M, et al. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Def Technol 281: 112-118.

 

Reader Comments

your name: *   your email: *  

© 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved