Special issue: Smart materials in civil structures

Maged A. Youssef; Maged A. Youssef

doi:10.3934/matersci.2025049

AIMS Materials Science

2025, Volume 12, Issue 5: 1065-1068. doi: 10.3934/matersci.2025049

Previous Article Next Article

Editorial Special Issues

Special issue: Smart materials in civil structures

Maged A. Youssef ^,

Civil and Environmental Engineering, Western University, London, Ontario, Canada

Received: 31 October 2025 Revised: 02 November 2025 Accepted: 03 November 2025 Published: 04 November 2025

Citation: Maged A. Youssef. Special issue: Smart materials in civil structures[J]. AIMS Materials Science, 2025, 12(5): 1065-1068. doi: 10.3934/matersci.2025049

Related Papers:

References

[1]	Liu YL, Xiao XZ, Zhou XY, et al. (2025) Tailoring mechanical and functional properties of calcium sulphoaluminate cement (CSA) foam concrete with FA and GGBS replacements. AIMS Mater Sci 12: 1025–1040. https://doi.org/10.3934/matersci.2025047 doi: 10.3934/matersci.2025047
[2]	Hu FZ, Zhang SJ, Liu J, et al. (2025) Performance test of road fly ash concrete under temperate climate and high salt environment in Asia. AIMS Mater Sci 12: 928–943. https://doi.org/10.3934/matersci.2025041 doi: 10.3934/matersci.2025041
[3]	Khalifa M, Youssef MA, Ajjan Alhadid MM (2025) Flexural capacity of stainless-steel reinforced-concrete elements. AIMS Mater Sci 12: 703–727. https://doi.org/10.3934/matersci.2025030 doi: 10.3934/matersci.2025030
[4]	Askouni PD (2025) Textile-reinforced mortar as a potential for enhancing the frost resistance of strengthened structural members. AIMS Mater Sci 12: 423–452. https://doi.org/10.3934/matersci.2025022 doi: 10.3934/matersci.2025022
[5]	Liu YL, Ren SY, Wang DH, et al. (2025) Molecular structure and thermal conductivity of hydrated sodium aluminosilicate (N-A-S-H) gel under different Si/Al ratios and temperatures: A molecular dynamics analysis. AIMS Mater Sci 12: 258–277. https://doi.org/10.3934/matersci.2025014 doi: 10.3934/matersci.2025014
[6]	Torres-Acosta AA, Méndez-Páramo RA, Arista-Perrusquía C, et al. (2025) Portland cement paste performance when inert limestone filler is added as clinker replacement. AIMS Mater Sci 12: 224–244. https://doi.org/10.3934/matersci.2025012 doi: 10.3934/matersci.2025012
[7]	Rauf I, Saputra MTY, Heryanto H, et al. (2024) Laboratory investigation of the influence of aluminum hydroxide on the compressive strength of nickel slag-stabilized soft soils. AIMS Mater Sci 11: 1220–1231. https://doi.org/10.3934/matersci.2024060 doi: 10.3934/matersci.2024060
[8]	Chairunnisa N, Haryanti NH, Nurwidayati R, et al. (2024) Characteristics of metakaolin-based geopolymers using bemban fiber additives. AIMS Mater Sci 11: 815–832. https://doi.org/10.3934/matersci.2024040 doi: 10.3934/matersci.2024040
[9]	Zhang CY, Chen F, Wang XD (2025) Microstructural evolution and direct shear strength of cement-stabilized soil under freeze-thaw cycles. AIMS Mater Sci 12: 28–47. https://doi.org/10.3934/matersci.2025003 doi: 10.3934/matersci.2025003
[10]	Cheng XD, Xia J, Krevaikas T, et al. (2025) A review of the applications of ultra-high performance concrete in flat components and the associated fire-induced spalling risk. AIMS Mater Sci 12: 165–202. https://doi.org/10.3934/matersci.2025010 doi: 10.3934/matersci.2025010

Reader Comments

Your name:*

Email:*
© 2025 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)