Export file:


  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text


  • Citation Only
  • Citation and Abstract

A review on smart self-sensing composite materials for civil engineering applications

1 Fibrous Materials Research Group, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
2 Department of Civil engineering, School of Engineering, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
3 Institute for Sustainability and Innovation in Structural Engineering, School of Engineering, University of Minho, Guimarães, Portugal

Topical Section: Responsive, Active and Smart materials

Self-sensing composites are becoming highly attractive for civil engineering applications to improve the safety and performance of structures. These smart composites show a detectable change in their electrical resistivity with applied stress or strain and this unique characteristic make them useful for health monitoring of structures. Till date, different forms of carbon composites, i.e. short fibre, continuous fibre, particles, nano fibres, nanotubes, etc. have been utilized for this purpose. In this context, the present paper reports an overview of different self-sensing composite systems used for the health monitoring of civil engineering structures.
  Article Metrics


1. Sun M, Staszewski WJ, Swamy RN (2010) Smart sensing technologies for structural health monitoring of civil engineering structures. Adv Civil Eng 2010: 1–13.

2. Aggelis DG, Alver N, Chai HK (2014) Health monitoring of civil infrastructure and materials. Hindwai Publishing Corporation.

3. Parveen S, Rana S, Fangueiro R (2013) A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites. J Nanomater 80.

4. Ye XW, Su YH, Han JP (2014) Structural health monitoring of civil infrastructure using optical fiber sensing technology: A comprehensive review. Sci World J.

5. Chang PC, Flatau A, Liu SC (2003) Review paper: health monitoring of civil infrastructure. Struct Health Monit 2: 257–267.    

6. Han B, Ding S, Yu X (2015) Intrinsic self-sensing concrete and structures: A review. Measurement 59: 110–128.

7. Sun MQ, Staszewski WJ, Swamy RN, et al. (2008) Application of low-profile piezo-ceramic transducers for health monitoring of concrete structures. NDT E Int 41: 589–595.    

8. Lim YY, Bhalla S, Soh CK (2006) Structural identification and damage diagnosis using self-sensing piezo-impedance transducers. Smart Mater Struct 15: 987–995.    

9. Ou J, Zhou Z (2008) Applications of optical fiber sensors of SHM in infrastructures. Smart Sensor Phenomena, Technology, Networks, and Systems, vol. 6933 of Proceedings of SPIE, pp. 10, San Diego, Calif, USA.

10. Wan KT, Leung CKY (2007) Applications of a distributed fiber optic crack sensor for concrete structures. Sens Actuators A 135: 458–464.    

11. Rizzo P, Di Scalea FL (2006) Wavelet-based feature extraction for automatic defect classification in strands by ultrasonic structural monitoring. Smart Struct Syst 2: 253–274.    

12. Luyckx G, Voet E, Lammens N, Degrieck J (2010) Strain measurements of composite laminates with embedded fibre Bragg gratings: Criticism and opportunities for research. Sensors 11: 384–408.

13. Wang HP, Liu WQ, Zhou Z, et al. (2011) The behavior of a novel raw material-encapsulated FBG sensor for pavement monitoring.Proc. International Conference on Optical Instruments and Technology: Optical Sensors and Applications, Beijing, China.

14. Obitayo W, Liu T (2012) A review: carbon nanotube-based piezoresistive strain sensors. J Sensors.

15. Chung DDL (2012) Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing. Carbon 50: 3342–3353.

16. Li C, Thostenson ET, Chou TW (2008) Sensors and actuators based on carbon nanotubes and their composites: a review. Compos Sci Technol 68: 1227–1249.

17. Park JM, Kwon DJ, Wang ZJ, et al. (2015) Review of self-sensing of damage and interfacial evaluation using electrical resistance measurements in nano/micro carbon materials-reinforced composites. Adv Compos Mater 24: 197–219.

18. Salvado R, Lopes C, Szojda L, et al. (2015) Carbon fiber epoxy composites for both strengthening and health monitoring of structures. Sensors 15: 10753–10770.    

19. Chung DDL (2016). Self-sensing structural composites in aerospace engineering. In: Advanced Composite Materials for Aerospace Engineering. Rana S, Fangueiro R (Editors). Woodhead Publishing Ltd.

20. Wen S, Chung DDL (2007) Electrical-resistance based damage self-sensing in carbon fiber reinforced cement. Carbon 45: 710–716.    

21. Wang W, Dai H, Wu S (2008) Mechanical behaviour and electrical property of CFRC-strengthened RC beams under fatigue and monotonic loading. Mater Sci Eng A 479: 191–196.    

22. Chen B, Liu J (2008) Damage in carbon fiber-reinforced concrete, monitored by both electrical resistance measurement and acoustic emission analysis. Constr Build Mater 22: 2196–2201.    

23. Rosado KP, Rana S, Pereira C, et al. (2013) Self-sensing hybrid composite rod with braided reinforcement for structural health monitoring. Mater Sci Forum 730–732: 379–384.

24. Ogi K, Takao Y (2005) Characterization of piezoresistance behavior in a CFRP unidirectional laminate. Compos Sci Technol 65: 231–239.

25. Wang X, Chung DDL (1996) Continuous carbon fibre epoxy-matrix composite as a sensor of its own strain. Smart Mater Struct 5: 796.    

26. Schulte K, Baron C (1989) Load and failure analyses of CFRP laminates by means of electrical resistivity measurements. Compos Sci Technol 36: 63–76.

27. Irving PE, Thiagarajan C (1998) Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique. Smart Mater Struct 7: 456.

28. Abry JC, Choi YK, Chateauminois A, et al. (2001) In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements. Compos Sci Technol 61: 855–864.    

29. Todoroki A, Tanaka M, Shimamura Y (2002) Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method. Compos Sci Technol 62: 619–628.

30. Selvakumaran L, Long Q, Prudhomme S, et al. (2015) On the detectability of transverse cracks in laminated composites using electrical potential change measurements. Compos Struct 121: 237–246.

31. Bakis CE, Nanni A, Terosky JA, et al. (2001) Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications. Compos Sci Technol 61: 815–823.

32. Muto N, Yanagida H, Nakatsuji T, et al. (1993) Preventing Fatal Fractures in Carbon‐Fiber–Glass‐Fiber‐Reinforced Plastic Composites by Monitoring Change in Electrical Resistance. J Am Ceramic Soc 76: 875–879.

33. Nanni F, Auricchio F, Sarchi F, et al. (2006) Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams. Smart Mater Struct 15: 182–186.    

34. Nanni F, Ruscito G, Forte G, et al. (2007) Design, manufacture and testing of self-sensing carbon fiber-glass fibre reinforced polymer rods. Smart Mater Struct 16: 2368–2374.    

35. Okuhara Y, Matsubara H (2005) Memorizing maximum strain in carbon-fiber-reinforced plastic composites by measuring electrical resistance under pre-tensile stress. Compos Sci Technol 65: 2148–2155.    

36. Nanni F, Ruscito G, Nad L, et al. (2009) Self-sensing nanocomposite CnP-GFRP rods as reinforcement and sensors of concrete beams. J Intell Mater Syst Struct 20: 1615–1623.    

37. Rana S, Zdraveva E, Pereira C, et al. (2014) Development of hybrid braided composite rods for reinforcement and health monitoring of structures. Sci World J Article ID 170187: 1–9.

38. Fangueiro R, Rana S, Correia AG (2013). Braided composite rods: innovative fibrous materials for geotechnical applications. Geomechanics Eng 5: 87–97.    

39. Goldfeld Y, Rabinovitch O, Fishbain B, et al. (2015) Sensory carbon fiber based textile-reinforced concrete for smart structures. J Intell Mater Syst Struct: 1–21.

40. Rana S, Alagirusamy R, Joshi M (2009) A review on carbon epoxy nanocomposites. J Reinf Plast Comp 28: 461–87.

41. Nanni F, Ruscito G, Nad L, et al. (2009) Self-sensing nanocomposite CnP-GFRP rods as reinforcement and sensors of concrete beams. J Intell Mater Syst Struct 20: 1615–1623.    

42. Gao D, Sturm M, Mo YL (2009) Electrical resistance of carbon-nanofiber concrete. Smart Mater Struct 18: 1–7.

43. Howser RN, Dhonde HB, Mo YL (2011) Self-sensing of carbon nanofiber concrete columns subjected to reversed cyclic loading. Smart Mater Struct 20: 1–13.

44. Azhari F, Banthia N (2012) Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing. Cem Concr Compos 34: 866–873.    

45. Yu X, Kwon E (2012) Carbon Nanotube Based Self-sensing Concrete for Pavement Structural Health Monitoring. Research report–Univ of Minnesota Duluth, Contract Number: US DOT: DTFH61-10-C-00011.

46. Rana S, Alagirusamy R, Joshi M (2011a) Development of carbon nanofibre incorporated three phase carbon/epoxy composites with enhanced mechanical, electrical and thermal properties. Compos Part A 42: 439–45.

47. Rana S, Alagirusamy R, Joshi M (2011b) Single-walled carbon nanotube incorporated novel three phase carbon/epoxy composite with enhanced properties. J Nanosci Nanotechno 11: 7033–6.

48. Bhattacharyya A, Rana S, Parveen S, et al. (2013). Mechanical and thermal transmission properties of carbon nanofiber‐dispersed carbon/phenolic multiscale composites. J Appl Polym Sci 129: 2383–2392.    

49. Rana S, Alagirusamy R, Fangueiro R, et al. (2012). Effect of carbon nanofiber functionalization on the in‐plane mechanical properties of carbon/epoxy multiscale composites. J Appl Polym Sci 125: 1951–1958.    

50. Kim KJ, Yu W, Lee JS, et al. (2010) Damage characterization of 3D braided composites using carbon nanotube-based in situ sensing. Compos Part A 41: 1531–1537.    

51. Wan L, Guo J (2015) Damage Analysis of Three‐Dimensional Braided Composite Material Using Carbon Nanotube Threads. Experimental Techniques.

52. Rana S, Fangueiro R (Eds). (2015) Braided structures and composites: Production, properties, mechanics and technical applications. CRC Press.

53. Subramani P, Rana S, Oliveira DV, et al. (2014) Development of novel auxetic structures based on braided composites. Mater Des 61: 286–295.    

54. Cunha F, Rana S, Fangueiro R, et al. (2014) Excellent bonding behaviour of novel surface-tailored fiber composite rods with cementitious matrix. Bull Mater Sci 37: 1013–1016.    

55. Pichandi S, Rana R, Oliveira D, et al. (2013) Fibrous and composite materials for blast protection of structural elements – A state-of-the-art review. J Reinf Plast Compos 32: 1477–1500.

Copyright Info: © 2016, Antonio Gomes Correia, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved