Processing math: 100%
Research article Special Issues

Research into the operating modes of a stand-alone dual-channel hybrid power system

  • The article describes the development and simulation of a stand-alone hybrid power system based on a variable-speed diesel generator and a hydrogen fuel cell generation system. The goal of the research was to investigate the electromagnetic processes of this power system, which supplies power to autonomous energy consumers with varying load demand. MATLAB Simulink was used to simulate the proposed hybrid power system and check its operating capacity. The results of the simulation include the dependencies of current and voltage changes in the critical components of the hybrid system at stepwise load rate changes. In the future, the developed models and simulation results will allow researchers to select semiconductor devices and create microprocessor-based control systems for electric power installations that meet specific requirements. The dual-channel power system can provide a required power output of 3 kW when powered by a diesel generator and 1 kW when powered by a hydrogen fuel cell. At the same time, the total harmonic distortion (THD) at a load between 100 W and 3 kW varies within acceptable limits between 3.6% and 4.4%. It is worth noting that these higher power complexes can be incorporated into stand-alone electrical grids as well as centralized distribution systems for power deficit compensation during peak loads.

    Citation: Andrey Dar'enkov, Aleksey Kralin, Evgeny Kryukov, Yaroslav Petukhov. Research into the operating modes of a stand-alone dual-channel hybrid power system[J]. AIMS Energy, 2024, 12(3): 706-726. doi: 10.3934/energy.2024033

    Related Papers:

    [1] Yuhua Zhu . A local sensitivity and regularity analysis for the Vlasov-Poisson-Fokker-Planck system with multi-dimensional uncertainty and the spectral convergence of the stochastic Galerkin method. Networks and Heterogeneous Media, 2019, 14(4): 677-707. doi: 10.3934/nhm.2019027
    [2] Karoline Disser, Matthias Liero . On gradient structures for Markov chains and the passage to Wasserstein gradient flows. Networks and Heterogeneous Media, 2015, 10(2): 233-253. doi: 10.3934/nhm.2015.10.233
    [3] L.L. Sun, M.L. Chang . Galerkin spectral method for a multi-term time-fractional diffusion equation and an application to inverse source problem. Networks and Heterogeneous Media, 2023, 18(1): 212-243. doi: 10.3934/nhm.2023008
    [4] Kexin Li, Hu Chen, Shusen Xie . Error estimate of L1-ADI scheme for two-dimensional multi-term time fractional diffusion equation. Networks and Heterogeneous Media, 2023, 18(4): 1454-1470. doi: 10.3934/nhm.2023064
    [5] Yves Achdou, Victor Perez . Iterative strategies for solving linearized discrete mean field games systems. Networks and Heterogeneous Media, 2012, 7(2): 197-217. doi: 10.3934/nhm.2012.7.197
    [6] Hirotada Honda . On Kuramoto-Sakaguchi-type Fokker-Planck equation with delay. Networks and Heterogeneous Media, 2024, 19(1): 1-23. doi: 10.3934/nhm.2024001
    [7] Leqiang Zou, Yanzi Zhang . Efficient numerical schemes for variable-order mobile-immobile advection-dispersion equation. Networks and Heterogeneous Media, 2025, 20(2): 387-405. doi: 10.3934/nhm.2025018
    [8] Yin Yang, Aiguo Xiao . Dissipativity and contractivity of the second-order averaged L1 method for fractional Volterra functional differential equations. Networks and Heterogeneous Media, 2023, 18(2): 753-774. doi: 10.3934/nhm.2023032
    [9] Shui-Nee Chow, Xiaojing Ye, Hongyuan Zha, Haomin Zhou . Influence prediction for continuous-time information propagation on networks. Networks and Heterogeneous Media, 2018, 13(4): 567-583. doi: 10.3934/nhm.2018026
    [10] Ioannis Markou . Hydrodynamic limit for a Fokker-Planck equation with coefficients in Sobolev spaces. Networks and Heterogeneous Media, 2017, 12(4): 683-705. doi: 10.3934/nhm.2017028
  • The article describes the development and simulation of a stand-alone hybrid power system based on a variable-speed diesel generator and a hydrogen fuel cell generation system. The goal of the research was to investigate the electromagnetic processes of this power system, which supplies power to autonomous energy consumers with varying load demand. MATLAB Simulink was used to simulate the proposed hybrid power system and check its operating capacity. The results of the simulation include the dependencies of current and voltage changes in the critical components of the hybrid system at stepwise load rate changes. In the future, the developed models and simulation results will allow researchers to select semiconductor devices and create microprocessor-based control systems for electric power installations that meet specific requirements. The dual-channel power system can provide a required power output of 3 kW when powered by a diesel generator and 1 kW when powered by a hydrogen fuel cell. At the same time, the total harmonic distortion (THD) at a load between 100 W and 3 kW varies within acceptable limits between 3.6% and 4.4%. It is worth noting that these higher power complexes can be incorporated into stand-alone electrical grids as well as centralized distribution systems for power deficit compensation during peak loads.



    In the present paper, we consider numerical solution of the time fractional Fokker-Planck equations (TFFPEs):

    {αtuΔu+p(u)+q(x,t)u=f(x,t),(x,t)Ω×(0,T],u(x,0)=u0(x),xΩ,u(x,t)=0,xΩ,t(0,T], (1.1)

    where ΩRd(d=1,2,3), x=(x1,x2,,xd), u0(x) is smooth on Ω, p:=(p1,p2,,pd) with pi:=pi(x,t)(i=1,2,,d) and q:=q(x,t) are continuous functions. αtu represents the Caputo derivative of order α(0,1). When α=1 in Eq (1.1), the corresponding equations are a class of very useful models of statistical physics to describe some practical phenomena. TFFPEs are widely used in statistical physics to describes the probability density function of position and the evolution of the velocity of a particle, see e.g., [1,2,3,4]. The TFFPEs also represent the continuous limit of a continuous time random walk with a Mittag-Leffler residence time density. For a deeper understanding of TFFPEs, we refer the readers to [5,6]. In addition, the regularity of the solutions of the TFFPE (1.1) can be found in [7].

    For the past few years, many numerical methods were used to solve the TFFPEs. For example, Deng [8] proposed an efficient predictor-corrector scheme. Vong and Wang [9] constructed a compact finite difference scheme. Mahdy [10] used two different techniques to study the approximate solution of TFFPEs, namely the fractional power series method and the new iterative method. Yang et al. [11] proposed a nonlinear finite volume format to solve the two-dimensional TFFPEs. More details can refer to [12,13,14,15]. Besides, it is difficult that analysing the convergence and stability properties of the numerical schemes for TFFPEs, when convective and diffusion terms exist at the same time. In the study of TFFPEs, the conditions imposed on p and q were somewhat restrictive. For example, for solving the one-dimensional TFFPEs, Deng [16] proved the stability and convergence under the conditions that p1 was a monotonically decreasing function and q0. Chen et al. [17] obtained the stability and convergence properties of the method with the conditions that p1 was monotone or a constant and q was a constant.

    To solve the time Caputo fractional equations, one of the keys is the treatment of the Caputo derivative, which raised challenges in both theoretical and numerical aspects. Under the initial singularity of the solutions of the equations, many numerical schemes are only proved to be of τα in temporal direction, e.g., convolution quadrature (CQ) BDF method [18], CQ Euler method [19], uniform L1 method et al. [20,21]. Here τ represents the temporal stepsize. Considering the singularity of solutions, different numerical formats were established to obtain high convergence orders, e.g., the Alikhanov scheme (originally proposed in [22]) and the L1 scheme (see e.g., [23]) by employing the graded mesh (i.e., tn=T(n/K)r,n=1,2,,K, r is mesh parameter). It was proved that the optimal convergence of those methods can be 2 and 2α iff r2/α and r(2α)/α, respectively (see e.g., [24,25,26,27,28,29]). The ¯L1 scheme studied in [30,31,32] was another high-order scheme for Caputo fractional derivative. There were also some fast schemes for Caputo fractional derivative, see [33,34,35,36]. When α was small, the grids at the beginning would become very dense. It may lead to the so-called round-off errors. Recently, taking the small α and the initial singularity into account, Li et al. [37] introduced the transformation s=tα for the time variable, and derived and analyzed the equivalent fractional differential equation. They constructed the TL1 discrete scheme, and obtained that the convergence order of the TL1 scheme is of 2α. Based on the previous research, Qin et al. [38] studied the nonlinear fractional order problem, and established the discrete fractional order Grönwall inequality. Besides, discontinuous Galerkin methods were also effective to solve the similar problems with weak singular solutions [39,40,41].

    Much of the past study of TFFPEs (i.e., in [16,17,42,43]) has been based on many restrictions on q and pi,i=1,2,,d. This reduces the versatility of the equations. In the paper, we consider the more general TFFPE (1.1), i.e., q and pi,i=1,2,,d, are variable coefficients, and q is independent of pi. We draw on the treatment of the Caputo derivative in [37], introduce variable substitution, and construct the TL1 Legendre-Galerkin spectral scheme to solve the equivalent s-fractional equation. For time discreteness, we take into account the initial singularity, and obtain that the optimal convergence order is 2α. In terms of spatial discreteness, unlike other schemes [16,17], which impose restrictions on coefficients, the Legendre-Galerkin spectral scheme does not require pi and q to be constants or to be monotonic. Besides, we obtain the following theoretical results. The order of convergence in L2-norm of the method is exponential order convergent in spatial direction and (2α)-th order convergent in the temporal direction. And the scheme is valid for equations with small parameter α.

    The structure of the paper is as follows. In Section 2, we propose the TL1 Legendre-Galerkin spectral scheme for solving TFFPEs. In Section 3, the detailed proof of our main results is presented. In Section 4, two numerical examples are given to verify our obtained theoretical results. Some conclusion remarks are shown in Section 5.

    We denote Wm,p(Ω) and ||||Wm,p(Ω) as the Sobolev space of any functions defined on Ω and the corresponding Sobolev norm, respectively, where m0 and 1p. Especially, denote L2(Ω):=W0,2(Ω) and Hm(Ω):=Wm,2(Ω). Define C0(Ω) as the space of infinitely differentiable functions which are nonzero only on a compact subset of Ω and H10(Ω) as the completion of C0(Ω). For convenience, denote ||||0:=||||L2(Ω), ||||m:=||||Hm(Ω).

    For simplicity, we suppose that Ω=(1,1)d, and u(x,t)H10(Ω)Hm(Ω) for 0tT. First of all, we introduce TL1 scheme to discrete the Caputo fractional derivative. Introducing the change of variable as follows [21,37,44]:

    t=s1/α,w(x,s)=u(x,s1/α). (2.1)

    By this, then the Caputo derivative of u(x,t) becomes

    αtu(x,t)=1Γ(1α)t0u(x,r)r1(tr)αdr=1Γ(1α)s0w(x,r)r1(s1/αr1/α)αdr=Dαsw(x,s). (2.2)

    Hence, Eq (1.1) can be rewritten as

    Dαsw(x,s)Δw+˜p(w)+˜q(x,s)w=˜f(x,s),(x,s)Ω×(0,Tα], (2.3)
    w(x,s)=0,(x,s)Ω×(0,Tα], (2.4)
    w(x,0)=u0(x),xΩ, (2.5)

    where ˜p=(˜p1,˜p2,,˜pd), ˜pd:=pd(x,s1/α),˜q:=q(x,s1/α), and ˜f(x,s)=f(x,s1/α). Let sn=Tαn/K,n=0,1,,K, and the uniform mesh on [0,Tα] with τs=snsn1. For convenience, Ki, i1 represent the positive constants independent of τs and N, where N represents polynomial degree. In addition, we define the following notations

    ˜pnd:=˜pd(x,sn),˜qn:=˜q(x,sn),˜fn:=˜f(x,sn),
    wn:=w(x,sn),˜pn:=(˜pn1,˜pn2,,˜pnd).

    Applying the TL1 approximation, we have

    Dαswn=1Γ(1α)sn0w(x,r)r1(s1/αnr1/α)αdr=1Γ(1α)nl=1wlwl1τsslsl1dr(s1/αnr1/α)α+Qn=nl=1an,nl(wlwl1)+Qn:=Dατwn+Qn. (2.6)

    Here the coefficients an,nl=1τsΓ(1α)slsl1dr(s1/αnr1/α)α, and Qn represents the truncation error. For more details, we refer to [37,38]. By Eq (2.6), then Eq (2.3) arrives at

    DατwnΔwn+˜pn(wn)+˜qnwn=˜fnQn.

    For spatial discretization, we introduce the following basis functions:

    {ψk(x)}={ψk1(x1)ψk2(x2)ψkd(xd),k1,k2,,kdIN},

    where k=(k1,k2,,kd), IN={0,1,2,,N2}. For ψki(xi),i=1,2,,d, one has

    ψki(xi)=Lki(xi)Lki+2(xi)for kiIN, (2.7)

    where {Lj(x)}Nj=0 are the Legendre orthogonal polynomials, given by the following recurrence relationship [45]:

    {(j+1)Lj+1(x)=(2j+1)xLj(x)jLj1(x)for j1,L0(x)=1,L1(x)=x. (2.8)

    Define the finite-dimensional approximation space

    XN=span{ψk(x),k1,k2,,kdIN},

    where N=(N,N,,Nd). For any function wN(x), write

    wN(x)=k1,k2,,kdINˆwkψk(x).

    By Eqs (2.7) and (2.8), we have

    wN(x)|Ω=0for wN(x)XN.

    Then, the TL1 Legendre-Galerkin spectral scheme is to seek WnXN, such that

    (DατWn,v)+(Wn,v)+(Wn,˜pnv)+(˜qnWn,v)=(˜fn,v)for vXN. (2.9)

    Here W0=πNw0, and πN is the Ritz projection operator given in Lemma 2. For instance, if d=1, we solve Eqs (2.3) and (2.4) by

    A1Dατˆwn+(A2+A3n+A4n)ˆwn=Fn, (2.10)

    where ˆwn=(ˆwn0,ˆwn1,ˆwn2,,ˆwnN2)T, A1j,h=(ψh(x),ψj(x)), j,hIN, A2j,h=(ψh(x),ψj(x)), A3nj,h=(˜pnψh(x),ψj(x)), A4nj,h=(˜qnψh(x),ψj(x)), and Fnj,1=(˜fn,ψj(x)).

    The typical solution of Eq (1.1) meets [18,46,47]

    ||ut(x,t)||0Ctα1,

    then, with the help of the changes of variable (2.1), one has (see e.g., [38])

    ||lwsl(x,s)||0C(1+s1/αl)<,l=1,2, (2.11)

    where C>0 is a constant independent of s and x. From [37, Lemma 2.2] and [38, Lemma 2.1], the solution becomes smoother at the beginning.

    Now, the convergence results of TL1 Legendre-Galerkin spectral scheme (2.9) is given as follows.

    Theorem 1. Assume that ˜q and ~pi,i=1,2,,d, in (2.3) are bounded, and that the unique solution w of Eqs (2.3) and (2.4) satisfying Eq (2.11) and w(x,s)H10(Ω)Hm(Ω). Then, there exist N0>0 and τ0>0 such that when NN0 and τsτ0, Eq (2.9) has a unique solution Wn(n=0,1,,K), which satisfies

    ||wnWn||0K(τ2αs+N1m), (2.12)

    where K>0 is a constant independent of τs and N.

    We will present the detailed proof of Theorem 1 in this section. For this, we first introduce the following several lemmas.

    Lemma 1. [37,38] For n1, we get

    0<an,n1an,n2an,0. (3.1)

    Lemma 2. If we given the Ritz projection operator πN:H10(Ω)XN by

    ((πNww),v)=0forvXN,

    then, one can get that [48]

    ||πNww||lCΩNlm||w||mforwH10(Ω)Hm(Ω)

    with dmN+1, where CΩ>0 is a constant independent of N.

    Lemma 3. [49] For any sK=Tα>0 and given nonnegative sequence {λi}K1i=0, assume that there exists a constant λ>0 independent of τs such that λK1i=0λi. Assume also that the grid function {wn|n0} satisfies

    Dατ(wn)2ni=1λni(wi)2+wn(Qn+ξ)forn1,

    where {Qn|n1} is well defined in Eq (2.6). Then, there exists a constant τs>0 such that, when τsτs,

    wj2Eα(2λsj)[w0+C1(τ2αs+ξ)]for1jK,

    where C1 is a constant and Eα(x)=k=0xkΓ(1+kα).

    We will offer the proof of Theorem 1 in this section. The projection πNwn of the exact solution wn satisfies

    (DατπNwn,v)=(πNwn,v)(πNwn,˜pnv)(˜qnπNwn,v)+(˜fn,v)(Qn,v)(Rn,v)for vXN. (3.2)

    Here Rn=Dατ(wnπNwn)Δ(wnπNwn)+˜pn(wnπNwn)+˜qn(wnπNwn), and Qn is the truncation error for approximating the fractional derivative defined in Eq (2.6).

    The error between numerical solution Wn and exact solution wn can be divided into

    ||wnWn||0||wnπNwn||0+||πNwnWn||0. (3.3)

    Let

    en:=πNwnWnfor n=0,1,,K.

    Subtracting Eq (2.9) from Eq (3.2), we get that

    (Dατen,v)=(en,v)(en,˜pnv)(˜qnen,v)(Qn,v)(Rn,v)for vXN. (3.4)

    Setting v=en in Eq (3.4), we obtain

    (Dατen,en)=(en,en)(en,˜pnen)(˜qnen,en)(Qn,en)(Rn,en). (3.5)

    By Lemma 1, we have

    (Dατen,en)=(nl=1an,nl(elel1),en)=(an,0enn1l=1(an,nl1an,nl)elan,n1e0,en)12(an,0||en||20n1l=1(an,nl1an,nl)||el||20an,n1||e0||20)=12Dατ||en||20. (3.6)

    By Cauchy-Schwartz inequality, one can obtain that

    (en,en)(en,˜pnen)(˜qnen,en)||en||20+K1|(en,en)|+K2||en||20||en||20+||en||20+K214||en||20+K2||en||20(K214+K2)||en||20. (3.7)

    Here K1=max0nK{||˜p(x,sn)||0}, and K2=max0nK{maxxΩ|˜q(x,sn)|}. Similarly, we see that

    (Qn,en)||Qn||0||en||0. (3.8)

    Noting that enXN and by Lemma 2, one has

    ((wnπNwn),en)=0.

    Then

    (Rn,en)=(Dατ(wnπNwn),en)((wnπNwn),en)((wnπNwn),pnen)(˜qn(wnπNwn),en)||Dατ(wnπNwn)||0||en||0+K1||(wnπNwn)||0||en||0+K2||wnπNwn||0||en||0CΩNm||Dατwn||m||en||0+K1CΩN1m||wn||m||en||0+K2CΩNm||wn||m||en||0K3N1m||en||0. (3.9)

    Here K3=max0nK{CΩ||Dατwn||m,K1CΩ||wn||m,K2CΩ||wn||m}, and Lemma 2 is applied. Substituting Eqs (3.6)–(3.9) into Eq (3.5), one gets

    Dατ||en||202(K214+K2)||en||20+2(||Qn||0+K3N1m)||en||0.

    Noting that e0=0 and by Lemma 3, it follows that

    ||en||04K3C1(τ2αs+N1m)Eα(4(K21/4+K2)sn).

    By Eq (3.3), we observe

    ||wnWn||0||wnπNwn||0+||en||0CΩNm||wn||m+4K3C1(τ2αs+N1m)Eα(4(K21/4+K2)sn)K(τ2αs+N1m),

    where K=max0nK{CΩ||wn||m,4K3C1Eα(4(K21/4+K2)sn)}. This completes the proof.

    In this section, two numerical examples are given to verify our theoretical results. We define the maximal L2 error and the convergence order in time, respectively, as

    e(K)=max0nK||wnWn||L2,order=log(e(K1)/e(K2))log(K2/K1). (4.1)

    Example 1. Consider the one-dimensional TFFPEs:

    αtu=uxx2ux+t2u+f(x,t),u(1,1)×(0,1], (4.2)

    where the initial-boundary conditions and the forcing term function f are choosen by the analytical solution

    u(x,t)=(t2+tα)(x3+x5)sin(πx).

    In this case, q is independent of p1, furthermore, p1 and q are not monotone functions.

    We solve this problem with the TL1 Legendre-Galerkin spectral method. Table 1 gives the maximal L2 errors, the convergence orders in time and the CPU times with N=14. The temporal convergence orders are close to 2α in Table 1. For the spatial convergence test, we set K=8192. In Figure 1, we give the errors as a function of N with α=0.3,0.5,0.7 in logarithmic scale. We can observe that the errors indicate an exponential decay.

    Table 1.  Maximal L2 errors, convergence orders in time and CPU times with N=14 for Example 1.
    α=0.1 α=0.3 α=0.5
    K e(K) order CPU(s) e(K) order CPU(s) e(K) order CPU(s)
    4 5.3660e-03 * 1.12e-02 7.5697e-03 * 9.76e-03 8.5571e-03 * 9.92e-03
    16 1.3833e-03 0.98 2.45e-02 1.1574e-03 1.35 2.19e-02 1.3367e-03 1.34 2.25e-02
    64 1.7352e-04 1.50 8.06e-02 1.3606e-04 1.54 7.53e-02 1.8311e-04 1.43 7.40e-02
    256 1.6850e-05 1.68 2.90e-01 1.4476e-05 1.62 3.00e-01 2.3859e-05 1.47 3.01e-01

     | Show Table
    DownLoad: CSV
    Figure 1.  Errors in space with α=0.3,0.5,0.7 and different N for Example 1.

    Example 2. Consider the two-dimensional TFFPEs:

    αtu=Δu+t2x2y2(ux+uy)+(2t2xy2+2t2x2y)u,u(1,1)2×(0,1], (4.3)

    where the initial-boundary conditions and the forcing term function f are choosen by the analytical solution

    u(x,y,t)=Eα(tα)sin(πx)sin(πy).

    Table 2 gives the maximal L2 errors, the convergence orders in time and the CPU times with N=14. The temporal convergence orders are close to 2α in Table 2. For the spatial convergence test, we give the errors as a function of N for α=0.3,0.5,0.7 and K=8192 in Figure 2. We use the logarithmic scale for the error-axis. Again, we observe that the errors indicate an exponential decay.

    Table 2.  Maximal L2 errors, convergence orders in time and CPU times with N=14 for Example 2.
    α=0.3 α=0.5 α=0.7
    K e(K) order CPU(s) e(K) order CPU(s) e(K) order CPU(s)
    32 7.0619e-05 * 2.08e-01 1.7386e-04 * 1.73e-01 3.1316e-04 * 1.69e-01
    256 3.3124e-06 1.47 1.34e+00 9.7836e-06 1.38 1.28e+00 2.3617e-05 1.24 1.31e+00
    2048 1.1965e-07 1.60 1.29e+01 4.6734e-07 1.46 1.28e+01 1.6199e-06 1.29 1.30e+01
    8192 1.2339e-08 1.64 8.59e+01 5.9649e-08 1.48 8.54e+01 2.6824e-07 1.30 8.83e+01

     | Show Table
    DownLoad: CSV
    Figure 2.  Errors in space with α=0.3,0.5,0.7 and different N for Example 2.

    We present a TL1 Legendre-Galerkin spectral method to solve TFFPEs in this paper. The new scheme is convergent with O(τ2αs+N1m), where τs, N and m are the time step size, the polynomial degree and the regularity of the analytical solution, respectively. In addition, this TL1 Legendre-Galerkin spectral method still holds for problems with small α and gives better numerical solutions near the initial time. The new scheme can achieve a better convergence result on a relatively sparse grid point.

    The work of Yongtao Zhou is partially supported by the NSFC (12101037) and the China Postdoctoral Science Foundation (2021M690322).

    The authors declare that they have no conflicts of interest.



    [1] Voropay NI (2020) Trends and problems of electrical energy systems' transformation. Electricity 7: 12–21. https://doi.org/10.24160/0013-5380-2020-7-12-21 doi: 10.24160/0013-5380-2020-7-12-21
    [2] Sun F, Hou W, Yin B, et al. (2009) Preliminary studies on the linking of building hybrid energy system and distributed power generation system. 1st International Conference on Sustainable Power Generation and Supply, Nanjing, China. https://doi.org/10.1109/SUPERGEN.2009.5348238
    [3] Gomez JC, Morcos MM (2008) Distributed generation: Exploitation of islanding operation advantages. IEEE/PES Transmission and Distribution Conference and Exposition, Bogota, Colombia, 1–5. https://doi.org/10.1109/TDC-LA.2008.4641736
    [4] Leuchter J, Bauer P, Rerucha V, et al. (2009) Dynamic behavior modeling and verification of advanced electrical-generator set concept. IEEE Trans Ind Electron 56: 266–279. https://doi.org/10.1109/TIE.2008.2009517. doi: 10.1109/TIE.2008.2009517
    [5] Theubou T, Wamkeue R, Kamwa I (2012) Dynamic model of diesel generator set for hybrid wind-diesel small grids applications. 25th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Montreal, Canada, 1–4. https://doi.org/10.1109/CCECE.2012.6334849
    [6] Hanjalić S, Helać V (2016) Hybrid solar-wind power plants-simulation of a daily cycle and the criteria for the connection to the power grid. 4th International Symposium on Environmental Friendly Energies and Applications (EFEA), Belgrade, Serbia, 1–6. https://doi.org/10.1109/EFEA.2016.7748781.
    [7] Díaz-de-Baldasano MC, Mateos FJ, Núñez-Rivas LR, et al. (2013) Conceptual design of offshore platform supply vessel based on hybrid diesel generator-fuel cell power plant. Appl Energy 116: 91–100. https://doi.org/10.1016/j.apenergy.2013.11.049 doi: 10.1016/j.apenergy.2013.11.049
    [8] Kocheganov DM, Serebryakov АV, Dar'enkov AB, et al. (2020) Combined electric power plant simulation model. Bulletin of South Ural State University. Series: Power Engineering 20: 70–76. https://doi.org/10.14529/power200408. doi: 10.14529/power200408
    [9] Zhdanov I (2020) Hybrid power plant for power supply of autonomus objects. Master's thesis, Czech Technical University, Prague. Available from: https://dspace.cvut.cz/handle/10467/88134.
    [10] Ghenai C, Al-Ani I, Khalifeh F, et al. (2019) Design of solar pv/fuel cell/diesel generator energy system for dubai ferry. 2019 Advances in Science and Engineering Technology International Conferences (ASET), Dubai, United Arab Emirates, 1–5. https://doi.org/10.1109/ICASET.2019.8714292.
    [11] Kumar S, Garg V (2013) Hybrid system of PV solar/wind & fuel cell. Int J Adv Res Electr, Electron Instrum Eng 2: 3666–3679. Available from: https://www.ijareeie.com/upload/2013/august/20_HYBRID.pdf.
    [12] Mahesar S, Kaloi GS, Kumar M, et al. (2018) Power management of a stand-alone hybrid (wind/solar/battery) energy system: An experimental investigation. Int J Adv Comput Sci Appl 9: 216–221. https://doi.org/10.14569/IJACSA.2018.090631 doi: 10.14569/IJACSA.2018.090631
    [13] Seeling-Hochmuth G (1998) Optimisation of hybrid energy systems sizing and operation control. Dissertation, University of Kassel, Hesse. Available from: https://www.uni-kassel.de/upress/online/frei/978-3-933146-19-9.volltext.frei.pdf.
    [14] Paska J, Biczel P, Klos M (2009) Hybrid power systems—An effective way of utilising primary energy sources. Renewable Energy 34: 2414–2421. https://doi.org/10.1016/j.renene.2009.02.018 doi: 10.1016/j.renene.2009.02.018
    [15] Pan G, Bai Y, Song H, et al. (2023) Hydrogen fuel cell power system—development perspectives for hybrid topologies. Energies 16: 2680. https://doi.org/10.3390/en16062680 doi: 10.3390/en16062680
    [16] Sosnina ЕN, Shalukho AV, Veselov LE (2020) Application of SOFCs on biogas in power supply systems of agricultural enterprises. Smart Electr Eng 12: 27–41. https://doi.org/10.46960/2658-6754_2020_4_27 doi: 10.46960/2658-6754_2020_4_27
    [17] Hemmes K (2021) A personal retrospect on three decades of high temperature fuel cell research; ideas and lessons learned. Int J Hydrogen Energy 46: 14962–14976. https://doi.org/10.1016/j.ijhydene.2020.12.196 doi: 10.1016/j.ijhydene.2020.12.196
    [18] Zhou S, Cui Q, Zhang M, et al. (2018) Study on the management of fuel cell vehicle energy system using hybrid fuzzy logic controller. Power Gener Technol 39: 554–560. https://doi.org/10.12096/j.2096-4528.pgt.18157 doi: 10.12096/j.2096-4528.pgt.18157
    [19] Pinheiro Melo S, Toghyani S, Cerdas F, et al. (2023) Model-based assessment of the environmental impacts of fuel cell systems designed for eVTOLs. Int J Hydrogen Energy 48: 3171–3187. https://doi.org/10.1016/j.ijhydene.2022.10.083 doi: 10.1016/j.ijhydene.2022.10.083
    [20] Monkam L, Graf von Schweinitz A, Friedrichs J, et al. (2021) Feasibility analysis of a new thermal insulation concept of cryogenic fuel tanks for hydrogen fuel cell powered commercial aircraft. Int J Hydrogen Energy 47: 31395–31408. https://doi.org/10.1016/j.ijhydene.2022.07.069 doi: 10.1016/j.ijhydene.2022.07.069
    [21] Kösters TL, Liu X, Kožulović D, et al. (2022) Comparison of phase-change-heat-pump cooling and liquid cooling for PEM fuel cells for MW-level aviation propulsion. Int J Hydrogen Energy 47: 29399–29412. https://doi.org/10.1016/j.ijhydene.2022.06.235 doi: 10.1016/j.ijhydene.2022.06.235
    [22] Li G, Chen J, Zheng X, et al. (2020) Research on energy management strategy of hydrogen fuel cell vehicles. 2020 Chinese Automation Congress (CAC), Shanghai, China, 7604–7607. https://doi.org/10.1109/CAC51589.2020.9326669
    [23] Eriksson ELV, Gray E (2017) Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems—A critical review. Appl Energy 202: 348–364. https://doi.org/10.1016/j.apenergy.2017.03.132. doi: 10.1016/j.apenergy.2017.03.132
    [24] Filimonova АА, Chichirov АА, Chichirova ND, et al. (2022) Design layout review of hybrid systems with solid-oxide fuel cell and gas turbine for combined heat and power production. Siberian Federal Univ J Series: Eng Technol 15: 812–834. https://doi.org/10.17516/1999-494X-0438 doi: 10.17516/1999-494X-0438
    [25] Wu W, Bucknall RWG (2013) Conceptual evaluation of a fuel-cell-hybrid powered bus. 48th International Universities' Power Engineering Conference (UPEC), Dublin, Ireland, 1–5. https://doi.org/10.1109/UPEC.2013.6714968
    [26] Ishraque MF, Rahman A, Shezan SA, et al. (2024) Design optimization of a grid-tied hybrid system for a department at a university with a dispatch strategy-based assessment. Sustainability 16: 2642. https://doi.org/10.3390/su16072642. doi: 10.3390/su16072642
    [27] Punitha K, Rahman A, Radhamani AS, et al. (2024) An optimization algorithm for embedded raspberry pi pico controllers for solar tree systems. Sustainability 16: 3788. https://doi.org/10.3390/su16093788. doi: 10.3390/su16093788
    [28] Madisa VG, Ramakrishna NSS, Kamwa I, et al. (2023) Design and analysis of PV fed high-voltage gain DC-DC converter using PI and NN controllers. Ain Shams Eng J 14: 102061. https://doi.org/10.1016/j.asej.2022.102061. doi: 10.1016/j.asej.2022.102061
    [29] Shaik M, Gaonkar DN, Ramakrishna NSS, et al. (2024) Nataf-Kernel Density-Spline-based point estimate method for handling wind power correlation in probabilistic load flow. Expert Syst Appl 245: 123059. https://doi.org/10.1016/j.eswa.2023.123059 doi: 10.1016/j.eswa.2023.123059
    [30] Shezan SA, Ishraque MF, Shafiullah G, et al. (2023) Optimization and control of solar-wind islanded hybrid microgrid by using heuristic and deterministic optimization algorithms and fuzzy logic controller. Energy Rep 10: 3272–3288. https://doi.org/10.1016/j.egyr.2023.10.016 doi: 10.1016/j.egyr.2023.10.016
    [31] Khvatov OS, Dar'enkov AB (2014) Power plant based on a variable-speed diesel generator. Russ Electr Eng 85: 145–149. https://doi.org/10.3103/S1068371214030110 doi: 10.3103/S1068371214030110
    [32] Yakovleva D, Zhilenkov A, Karpov A (2017) Synthesis of the synchronous machine model operating natural stator windings phase signals and using generator catalogue data. International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM), St. Petersburg, Russia, 1–4. https://doi.org/10.1109/ICIEAM.2017.8076367
    [33] Loskutov A, Kurkin A, Shalukho A, et al. (2022) Investigation of PEM fuel cell characteristics in steady and dynamic operation modes. Energies 15: 6863. https://doi.org/10.3390/en15196863 doi: 10.3390/en15196863
    [34] Kulikov AL, Vanyaev VV, Dar'enkov AB, et al. (2021) Backup power supply source with hydrogen fuel cell and lithium iron phosphate battery. Smart Electr Eng 15: 107–124. https://doi.org/10.46960/2658-6754_2021_3_107 doi: 10.46960/2658-6754_2021_3_107
  • This article has been cited by:

    1. Yanping Chen, Jixiao Guo, Unconditional error analysis of the linearized transformed L1 virtual element method for nonlinear coupled time-fractional Schrödinger equations, 2025, 457, 03770427, 116283, 10.1016/j.cam.2024.116283
    2. Yongtao Zhou, Mingzhu Li, Error estimate of a transformed L1 scheme for a multi-term time-fractional diffusion equation by using discrete comparison principle, 2024, 217, 03784754, 395, 10.1016/j.matcom.2023.11.010
    3. Asghar Ali, Jamshad Ahmad, Sara Javed, Rashida Hussain, Mohammed Kbiri Alaoui, Muhammad Aqeel, Numerical simulation and investigation of soliton solutions and chaotic behavior to a stochastic nonlinear Schrödinger model with a random potential, 2024, 19, 1932-6203, e0296678, 10.1371/journal.pone.0296678
    4. Zemian Zhang, Yanping Chen, Yunqing Huang, Jian Huang, Yanping Zhou, A continuous Petrov–Galerkin method for time-fractional Fokker–Planck equation, 2025, 03770427, 116689, 10.1016/j.cam.2025.116689
  • Reader Comments
  • © 2024 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(1238) PDF downloads(82) Cited by(1)

Figures and Tables

Figures(11)  /  Tables(3)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog