Preparation and characterization of nanocarbons from <em>Nicotiana tabacum</em> stems

Cabinet Chivimbiso Musuna-Garwe; Netai Mukaratirwa-Muchanyereyi; Mathew Mupa; Courtie Mahamadi; Munyaradzi Mujuru; Cabinet Chivimbiso Musuna-Garwe; Netai Mukaratirwa-Muchanyereyi; Mathew Mupa; Courtie Mahamadi; Munyaradzi Mujuru

doi:10.3934/matersci.2018.6.1242

AIMS Materials Science

2018, Volume 5, Issue 6: 1242-1254. doi: 10.3934/matersci.2018.6.1242

Previous Article Next Article

Research article

Preparation and characterization of nanocarbons from Nicotiana tabacum stems

1.
Tobacco Research Board, Department of Analytical Chemistry, P.O. Box 1909, Harare, Zimbabwe
2.
Bindura University of Science Education, Department of Chemistry, Private Bag 1020, Bindura, Zimbabwe
3.
Department of Water and Sanitation, University of Limpopo, P.O. Box X1106, Sovenga 0727, South Africa

Received: 30 June 2018 Accepted: 27 November 2018 Published: 03 December 2018

Nanocarbon materials can improve adsoption capacity if the nano size range is optimized during production. In this study, nanocarbons were prepared from green recyclable waste N. tabacum stem using carbonization process and KOH as the activating agent, thus potentially unclocking value in the otherwise waste material. The formation of nanocarbons was investigated at different KOH concentration, activation temperature and carbonization time. Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Brunauer–Emmett–Teller (BET) techniques were used to characterise the nanocarbon material. The results showed that nanocarbons with high specific surface areas in excess of 950 m²/g and nanostructured morphologies characterized by pore width averages ranging from 3.33–8.87 nm, pore diameter 10.59–45.30 nm and particle size 25.34–54.88 nm could be formed. Optimum nanocarbon production was achieved when the precursor was activated using 10% KOH and carbonized at a temperature of 400 ℃ for 4 h. Characteristic FT-IR absorption bands were observed in all carbonized samples. SEM images revealed a dense irregular material with cavities and protuberances. XRD patterns showed that crystallinity of the nanocarbons decreased with increase in carbonization time. The properties reported for the nanocarbons are ideal for adsoption of analytes from complex matrices, hence presenting N. tabacum as a promising low-cost and green alternative precursor for nanocarbon production targeting analytical fields such as solid-phase extraction and solid phase microextraction. The produced nanocarbons appear to be carbon nanoparticles comprising nearly spherical particles.

Keywords:

Citation: Cabinet Chivimbiso Musuna-Garwe, Netai Mukaratirwa-Muchanyereyi, Mathew Mupa, Courtie Mahamadi, Munyaradzi Mujuru. Preparation and characterization of nanocarbons from Nicotiana tabacum stems[J]. AIMS Materials Science, 2018, 5(6): 1242-1254. doi: 10.3934/matersci.2018.6.1242

Related Papers:

[1]	Yujie Sheng, Jing-An Cui, Songbai Guo . The modeling and analysis of the COVID-19 pandemic with vaccination and isolation: a case study of Italy. Mathematical Biosciences and Engineering, 2023, 20(3): 5966-5992. doi: 10.3934/mbe.2023258
[2]	Rong Yuan, Yangjun Ma, Congcong Shen, Jinqing Zhao, Xiaofeng Luo, Maoxing Liu . Global dynamics of COVID-19 epidemic model with recessive infection and isolation. Mathematical Biosciences and Engineering, 2021, 18(2): 1833-1844. doi: 10.3934/mbe.2021095
[3]	Fang Wang, Lianying Cao, Xiaoji Song . Mathematical modeling of mutated COVID-19 transmission with quarantine, isolation and vaccination. Mathematical Biosciences and Engineering, 2022, 19(8): 8035-8056. doi: 10.3934/mbe.2022376
[4]	Shina D. Oloniiju, Olumuyiwa Otegbeye, Absalom E. Ezugwu . Investigating the impact of vaccination and non-pharmaceutical measures in curbing COVID-19 spread: A South Africa perspective. Mathematical Biosciences and Engineering, 2022, 19(1): 1058-1077. doi: 10.3934/mbe.2022049
[5]	Hamdy M. Youssef, Najat A. Alghamdi, Magdy A. Ezzat, Alaa A. El-Bary, Ahmed M. Shawky . A new dynamical modeling SEIR with global analysis applied to the real data of spreading COVID-19 in Saudi Arabia. Mathematical Biosciences and Engineering, 2020, 17(6): 7018-7044. doi: 10.3934/mbe.2020362
[6]	Xinmiao Rong, Liu Yang, Huidi Chu, Meng Fan . Effect of delay in diagnosis on transmission of COVID-19. Mathematical Biosciences and Engineering, 2020, 17(3): 2725-2740. doi: 10.3934/mbe.2020149
[7]	Jiangbo Hao, Lirong Huang, Maoxing Liu, Yangjun Ma . Analysis of the COVID-19 model with self-protection and isolation measures affected by the environment. Mathematical Biosciences and Engineering, 2024, 21(4): 4835-4852. doi: 10.3934/mbe.2024213
[8]	Adil Yousif, Awad Ali . The impact of intervention strategies and prevention measurements for controlling COVID-19 outbreak in Saudi Arabia. Mathematical Biosciences and Engineering, 2020, 17(6): 8123-8137. doi: 10.3934/mbe.2020412
[9]	Sarita Bugalia, Vijay Pal Bajiya, Jai Prakash Tripathi, Ming-Tao Li, Gui-Quan Sun . Mathematical modeling of COVID-19 transmission: the roles of intervention strategies and lockdown. Mathematical Biosciences and Engineering, 2020, 17(5): 5961-5986. doi: 10.3934/mbe.2020318
[10]	Akhil Kumar Srivastav, Pankaj Kumar Tiwari, Prashant K Srivastava, Mini Ghosh, Yun Kang . A mathematical model for the impacts of face mask, hospitalization and quarantine on the dynamics of COVID-19 in India: deterministic vs. stochastic. Mathematical Biosciences and Engineering, 2021, 18(1): 182-213. doi: 10.3934/mbe.2021010

Abstract

References

[1]	Madhu R, Palanisamy S, Chen SM, et al. (2014) A low temperature synthesis of activated carbon from the bio waste for simultaneous electrochemical determination of hydroquinone and catechol. J Electroanal Chem 727: 84–90. doi: 10.1016/j.jelechem.2014.06.005
[2]	Hui TS, Zaini MAA (2015) Potassium hydroxide activation of carbon: a commentary. Carbon Lett 16: 275–280. doi: 10.5714/CL.2015.16.4.275
[3]	Ravelo-Pérez LM, Herrera-Herrera AV, Hernandez-Borges J, et al. (2010) Carbon nanotubes: Solid-phase extraction. J Chromatogr A 1217: 2618–2641. doi: 10.1016/j.chroma.2009.10.083
[4]	Li X, Xing W, Zhuo S, et al. (2011) Preparation of capacitor's electrode from sunflower seed shell. Bioresource Technol 102: 1118–1123. doi: 10.1016/j.biortech.2010.08.110
[5]	Ashokumar M, Narayanan NT, Gupta BK, et al. (2013) Conversion of industrial bio-waste into useful nanomaterials. ACS Sustain Chem Eng 1: 619–626. doi: 10.1021/sc3001564
[6]	Rahman MA, Amin SMR, Alam AMS (2012) Removal of methylene blue from waste water using activated carbon prepared from rice husk. Dhaka Univ J Sci 60: 185–189.
[7]	Álvarez-Torrellas S, García-Lovera R, Rodríguez A, et al. (2015) Removal of methylene blue by adsorption on mesoporous carbon from peach stones. Chem Eng Trans 43: 1963–1968.
[8]	Mohan MA, Chadaga M (2014) Methylene blue colour removal using physically and chemically activated cashew nut shell activated carbon. IJTEEE 2: 64–69.
[9]	Molina-Sabio M, Rodriguez-Reinoso F (2004) Role of chemical activation in the development of carbon porosity. Colloid Surface A 241: 15–25. doi: 10.1016/j.colsurfa.2004.04.007
[10]	Peševski MĐ, Iliev BM, Živković DL, et al. (2010) Possibilities for utilization of tobacco stems for production of energetic briquettes. J Agr Sci 55: 45–54. doi: 10.2298/JAS1001045P
[11]	Graciano RML, de Freitas VP, Ábel FM (2014) Simultan sacharification and fermentation of tobacco samples. Analecta Technica Szegedinensia 8: 80–89. doi: 10.14232/analecta.2014.2.80-89
[12]	Qi BC, Aldrich C (2008) Biosorption of heavy metals from aqueous solutions with tobacco dust. Bioresource Technol 99: 5595–5601. doi: 10.1016/j.biortech.2007.10.042
[13]	Ghosh RK, Reddy DD (2013) Tobacco stem ash as an adsorbent for removal of methylene blue from aqueous solution: equilibrium, kinetics, and mechanism of adsorption. Water Air Soil Poll 224: 1582. doi: 10.1007/s11270-013-1582-5
[14]	Wang X, Ouyang Y, Li X, et al. (2008) Room-temperature all-semiconducting sub-10-nm graphene nanoribbon field-effect transistors. Phys Rev Lett 100: 206803. doi: 10.1103/PhysRevLett.100.206803
[15]	Li W, Zhang LB, Peng JH, et al. (2008) Preparation of high surface area activated carbons from tobacco stems with K₂CO₃ activation using microwave radiation. Ind Crop Prod 27: 341–347. doi: 10.1016/j.indcrop.2007.11.011
[16]	Abechi SE, Gimba CE, Uzairu A, et al. (2013) Preparation and characterization of activated carbon from palm kernel shell by chemical activation. Res J Chem Sci 3: 54–61.
[17]	Viswanathan I, Neel P, Varadarajan TK (2009) Methods of activation and specific applications of carbon materials. National Centre for Catalysis Research, Indian Institute of Technology Madras, Chennai 600 036.
[18]	Makeswari M, Santhi S (2013) Optimization of preparation of activated carbon from Ricinus communis leaves by microwave-assisted zinc chloride chemical activation: Competitive adsorption of Ni²⁺ ions from aqueous solution. J Chem 2013: 314790.
[19]	ASTM D4607-94 (2006) Standard Test Method for Determination of Iodine Number of Activated Carbon. American Society for Testing and Materials, Annual book of ASTM standards.
[20]	Cao W, Hu SS, Ye LH, et al. (2015) Trace-chitosan-wrapped multi-walled carbon nanotubes as a new sorbent in dispersive micro solid-phase extraction to determine phenolic compounds. J Chromatogr A 1390: 13–21. doi: 10.1016/j.chroma.2015.02.060
[21]	Purkayastha MD, Manhar AK, Mandal M, et al. (2014) Industrial waste-derived nanoparticles and microspheres can be potent antimicrobial and functional ingredients. J Appl Chem 2014: 171427.
[22]	Deng XJ, Guo QJ, Chen XP, et al. (2014) Rapid and effective sample clean-up based on magnetic multiwalled carbon nanotubes for the determination of pesticide residues in tea by gas chromatography–mass spectrometry. Food Chem 145: 853–858. doi: 10.1016/j.foodchem.2013.08.137
[23]	Hou X, Lei SR, Qui ST, et al. (2014) A multi-residue method for the determination of pesticides in tea using multi-walled carbon nanotubes as a dispersive solid phase extraction absorbent. Food Chem 153: 121–129. doi: 10.1016/j.foodchem.2013.12.031
[24]	Rodriguez-Reinos F, Molina-Sabio M, Gonzalez MT (1995) The use of steam and CO₂ as activating agents in the preparation of activated carbons. Carbon 33: 15–23. doi: 10.1016/0008-6223(94)00100-E
[25]	Hu B, Wang K, Wu LH, et al. (2010) Engineering carbon materials from the hydrothermal carbonization process of biomass. Adv Mater 22: 813–828. doi: 10.1002/adma.200902812
[26]	Senthilkumar ST, Selvan RK (2013) The biomass derived activated carbon for supercapacitor. AIP Conf Proc 1538: 124–127.
[27]	Strachowski P, Bystrzejewski M (2015) Comparative studies of sorption of phenolic compounds onto carbon-encapsulated iron nanoparticles, carbon nanotubes and activated carbon. Colloid Surface A 467: 113–123. doi: 10.1016/j.colsurfa.2014.11.044
[28]	Marsh H, Rodriguez-Reinoso F (2006) SEM and TEM Images of Structures in Activated Carbons, In: Activated Carbon, 1^st edition, Elsevier, 366–382.
[29]	Akbari B, Tavandashti MP, Zandrahimi M (2011) Particle size characterization of nanoparticles-A Practical approach. IJMSE 8: 48–56.
[30]	Hashim M, Sa'adu L (2014) A flexible solid state EDLC from a commercially prepared multiwalled carbon nanortubes and hybrid polymer electrolyte. J Mater Sci Res 3: 13–21.
[31]	Wang HL, Xu ZW, Kohandehghan A, et al. (2013) Interconnected carbon nanosheets derived from hemp for ultrafast supercapacitors with high energy. ACS Nano 7: 5131–5141. doi: 10.1021/nn400731g

This article has been cited by:

1.	Aili Wang, Xueying Zhang, Rong Yan, Duo Bai, Jingmin He, Evaluating the impact of multiple factors on the control of COVID-19 epidemic: A modelling analysis using India as a case study, 2023, 20, 1551-0018, 6237, 10.3934/mbe.2023269
2.	Jiangbo Hao, Lirong Huang, Maoxing Liu, Yangjun Ma, Analysis of the COVID-19 model with self-protection and isolation measures affected by the environment, 2024, 21, 1551-0018, 4835, 10.3934/mbe.2024213
3.	Alaa Falih Mahdi, Hussein K. Asker, A Sensitivity Analysis of the PSITPS Epidemic Model’s Parameters for COVID-19, 2024, 11, 2518-0010, 79, 10.31642/JoKMC/2018/110210
4.	Padma Bhushan Borah, Kaushik Dehingia, Hemanta Kr. Sarmah, Homan Emadifar, Dynamics of simultaneous propagation of two COVID-19 strains, 2025, 2025, 2731-4235, 10.1186/s13662-025-03901-3
5.	Arpita Devi, Praveen Kumar Gupta, 2025, Chapter 2, 978-3-031-84322-8, 19, 10.1007/978-3-031-84323-5_2

Reader Comments

Your name:*

Email:*
© 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)