Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Physical activation and characterization of tannin-based foams enforced with boric acid and zinc chloride

1 Research Unit of Sustainable Chemistry, University of Oulu, P.O. Box 8000, FI-90014, Finland
2 Applied Chemistry, University of Jyvaskyla, Kokkola University Consortium Chydenius, P.O. Box 567, FI-67101 Kokkola, Finland
3 Fibre and Particle Engineering Research Unit, University of Oulu, P.O. Box 8000, FI-90014, Finland

Topical Section: Porous Materials

In this study, tannin-furanic-based foams enforced with H3BO3 and ZnCl2 are investigated, as well as their properties such as mechanical strength, specific surface area, and pore size distribution. From an industrial point of view, the aforementioned properties of these foams play a key role when used as catalyst, adsorbent, or gas storing materials. Therefore, this study aims to prove that such enforced tannin-furanic foams are promising materials for these types of applications. According to the results, materials that are up to five times stronger can be achieved by carbonizing the foams in comparison to maturing them. With physical activation, it was possible to obtain a specific surface area as high as 845 m2/g with a pore volume of up to 0.35 cm3/g. Chemical activation, using ZnCl2 as the activating agent, produced a specific surface area and pore volume of 737 m2/g and 0.31 cm3/g. However, the pore sizes were mostly microporous, independently of activation procedure used.
  Figure/Table
  Supplementary
  Article Metrics
Download full text in PDF

Export Citation

Article outline

Copyright © AIMS Press All Rights Reserved