Search Advanced

2019 Volume 6, Issue 2

Research article
Development of measurement system of cutting load response in nipper blade, and estimation of wedge angle effect on cutting characteristics and shear edge trace of polystyrene bars
Thepwachara Ruchirabha,  Shigeru Nagasawa
2019, Volume 6, Issue 2: 139-164. doi: 10.3934/matersci.2019.2.139
Abstract HTML PDF Cited (2) Viewed (4611)
Research article
Properties of graphite/epoxy composites: the in-plane conductivity, tensile strength and Shore hardness
Hendra Suherman,  Yovial Mahyoedin,  Edi Septe,  Roni Rizade
2019, Volume 6, Issue 2: 165-173. doi: 10.3934/matersci.2019.2.165
Abstract HTML PDF Cited (19) Viewed (11630)
Review
Overview of thin film deposition techniques
Olayinka Oluwatosin Abegunde,  Esther Titilayo Akinlabi,  Oluseyi Philip Oladijo,  Stephen Akinlabi,  Albert Uchenna Ude
2019, Volume 6, Issue 2: 174-199. doi: 10.3934/matersci.2019.2.174
Abstract HTML PDF Cited (194) Viewed (37856)
Review
Colloidal stability of liposomes
Domenico Lombardo,  Pietro Calandra,  Maria Teresa Caccamo,  Salvatore Magazù,  Mikhail Alekseyevich Kiselev
2019, Volume 6, Issue 2: 200-213. doi: 10.3934/matersci.2019.2.200
Abstract HTML PDF Cited (30) Viewed (8613)
Research article
Optimum reductants ratio for CO2 reduction by overlapped Cu/TiO2
Akira Nishimura,  Ryuki Toyoda,  Daichi Tatematsu,  Masafumi Hirota,  Akira Koshio,  Fumio Kokai,  Eric Hu
2019, Volume 6, Issue 2: 214-233. doi: 10.3934/matersci.2019.2.214
Abstract HTML PDF Cited (4) Viewed (4789)
Mini review
Recent coating materials for textile-based solar cells
Andrea Ehrmann,  Tomasz Blachowicz
2019, Volume 6, Issue 2: 234-251. doi: 10.3934/matersci.2019.2.234
Abstract HTML PDF Cited (30) Viewed (9521)
Research article
Two-dimensional implementation of the coarsening method for linear peridynamics
Yakubu Galadima,  Erkan Oterkus,  Selda Oterkus
2019, Volume 6, Issue 2: 252-275. doi: 10.3934/matersci.2019.2.252
Abstract HTML PDF Cited (15) Viewed (4928)
Research article
The properties study of transparent conductive oxides (TCO) of tin dioxide (ATO) doped by antimony obtained by spray pyrolysis
Timur Zinchenko,  Ekaterina Pecherskaya,  Dmitriy Artamonov
2019, Volume 6, Issue 2: 276-287. doi: 10.3934/matersci.2019.2.276
Abstract HTML PDF Cited (21) Viewed (6858)
Research article
Effects of solution composition on corrosion behavior of 13 mass% Cr martensitic stainless steel in simulated oil and gas environments
Masatoshi Sakairi,  Hirotaka Mizukami,  Shuji Hashizume
2019, Volume 6, Issue 2: 288-300. doi: 10.3934/matersci.2019.2.288
Abstract HTML PDF Cited (2) Viewed (6437)
Research article
Physical activation and characterization of tannin-based foams enforced with boric acid and zinc chloride
Toni Varila,  Henrik Romar,  Tero Luukkonen,  Ulla Lassi
2019, Volume 6, Issue 2: 301-314. doi: 10.3934/matersci.2019.2.301
Abstract HTML PDF Cited (5) Viewed (6521)
AIMS Materials Science
1.8 3.7
Copyright © AIMS Press