Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Rapid reproduction of complex images in graphite by laser etching and exfoliation

1 Chemical Engineering Department, Loughborough University, Loughborough, Leicestershire, LE11 3TU, United Kingdom
2 Physics Department, Loughborough University, Loughborough, Leicestershire, LE11 3TU, United Kingdom

Topical Section: 2D Materials

We describe a means to produce thin layers of carbon, graphene multilayers, using laser etching followed by exfoliation. Complex macroscopic images can be produced in minutes. The laser need only mark the top-most layers of graphene for the image to become permanent down to the glass substrate. We use the technique to produce artwork for proof of principle results. With refinement the methodology should also enable patterning of novel graphene electronic and optoelectronic devices.
  Figure/Table
  Supplementary
  Article Metrics

References

1. Novoselov KS, Geim AK, Morozov SV, et al. (2004) Electric field effect in atomically thin carbon films. Science 306: 666–669.    

2. Nair RR, Blake P, Grigorenko AN, et al. (2008) Fine structure constant defines visual transparency of graphene. Science 320: 1308–1308.    

3. Zhu SE, Yuan S, Janssen G (2014) Optical transmittance of multilayer graphene. EPL 108: 17007.    

4. Yung KC, Wu WM, Pierpoint MP, et al. (2013) Introduction to graphene electronics-a new era of digital transistors and devices. Contemp Phys 54: 233–251.    

5. Bonaccorso F, Sun Z, Hasan T, et al. (2010) Graphene photonics and optoelectronics. Nat Photonics 4: 611–622.    

6. Forrester DM (2015) Confinement effects of levitons in a graphene cosmology laboratory. RSC Adv 5: 5442–5449.    

7. Yang L, Zhang Q, Diao D (2016) Cross-linking-induced frictional behavior of multilayer graphene: origin of friction. Tribol Lett 62: 1–7.    

8. Kim G, Jang AR, Jeong HY, et al. (2013) Growth of high-crystalline, single-layer hexagonal boron nitride on recyclable platinum foil. Nano Lett 13: 1834–1839.    

9. Novoselov KS, Jiang D, Schedin F, et al. (2005) Two-dimensional atomic crystals. Proceedings of the National Academy of Sciences of the United States of America, 102: 10451–10453.

10. De Boer J, Brakenhoff GJ (1974) A simple method for carbon film thickness determination. J Ultrastruct Res 49: 224–227.    

11. Weber JW, Calado VE, van de Sanden MCM (2010) Optical constants of graphene measured by spectroscopic ellipsometry. Appl Phys Lett 97: 091904.    

12. Bruna M, Borini S (2009) Optical constants of graphene layers in the visible range. Appl Phys Lett 94: 031901.    

13. Ma B, Wang P, Ren S, et al. (2016) Versatile optical determination of two-dimensional atomic crystal layers. Carbon 109: 384–389.    

14. Holovský J, Nicolay S, De Wolf S, et al. (2015) Effect of the thin-film limit on the measurable optical properties of graphene. Sci Rep 5: 15684.    

15. Albrektsen O, Eriksen RL, Novikov SM (2012) High resolution imaging of few-layer graphene. J Appl Phys 111: 064305.    

16. Ye Q, Wang J, Liu Z, et al. (2013) Polarization-dependent optical absorption of graphene under total internal reflection. Appl Phys Lett 102: 021912.    

17. Trabelsi ABG, Kusmartsev FV, Forrester DM, et al. (2016) The emergence of quantum capacitance in epitaxial graphene. J Mater Chem C 4: 5829–5838.    

18. Ermakov VA, Alaferdov AV, Vaz AR, et al. (2015) Burning Graphene Layer-by-Layer. Sci Rep 5: 11546.    

19. Kalita G, Qi L, Namba Y, et al. (2011) Femtosecond laser induced micropatterning of graphene film. Mater Lett 65: 1569–1572.    

20. Lin Z, Ye X, Han J, et al. (2015) Precise control of the number of layers of graphene by picosecond laser thinning. Sci Rep 5: 11662.

Copyright Info: © 2017, Derek Michael Forrester, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved