Export file:


  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text


  • Citation Only
  • Citation and Abstract

Melt-mixed thermoplastic composites containing carbon nanotubes for thermoelectric applications

Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Strasse 6, D-01069, Dresden, Germany

Topical Section: Advanced composites

Flexible thermoelectric materials are prepared by melt mixing technique, which can be easily scaled up to industrial level. Hybrid filler systems of carbon nanotubes (CNTs) and copper oxide (CuO), which are environmental friendly materials and contain abundant earth elements, are melt mixed into a thermoplastic matrix, namely polypropylene (PP). With the CNT addition, an electrical network could be built up inside the insulating PP for effective charge transport. The effect of CuO addition is determined by the corresponding CNT concentration. At high CNT concentration, largely above the percolation threshold (φc, ca. 0.1 wt%), the change in the TE properties is small. In contrast, at CNT concentration close to φc, the co-addition of CuO could simultaneously increase the electrical conductivity and Seebeck coefficient. With 5 wt% CuO and 0.8 wt% CNTs where a loose percolated network is formed, the Seebeck coefficient was increased from 34.1 µV/K to 45 µV/K while the electrical conductivity was from 1.6 × 10−3 S/cm to 3.8 × 10−3 S/cm, leading to a power factor of 9.6 × 10−4 µW/mK2 (cf. 1.8 × 10−4 µW/mK2 for the composite with only 0.8 wt% CNTs).
  Article Metrics

Keywords carbon nanotube; melt mixing; copper oxide; thermoelectric; composite; thermoplastic

Citation: Jinji Luo, Beate Krause, Petra Pötschke. Melt-mixed thermoplastic composites containing carbon nanotubes for thermoelectric applications. AIMS Materials Science, 2016, 3(3): 1107-1116. doi: 10.3934/matersci.2016.3.1107


  • 1. Snyder GJ, Toberer ES (2008) Complex thermoelectric materials. Nat Mater 7: 105–114.    
  • 2. Poudel B, Hao Q, Ma Y, et al. (2008) High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320: 634–638.    
  • 3. McGrail BT, Sehirlioglu A, Pentzer E (2015) Polymer composites for thermoelectric applications. Angew Chem Int Edit 54: 1710–1723.    
  • 4. Tans SJ, Verschueren AR, Dekker C (1998) Room-temperature transistor based on a single carbon nanotube. Nature 393: 49–52.    
  • 5. Shim M, Javey A, Shi Kam NW, et al. (2001) Polymer functionalization for air-stable n-type carbon nanotube field-effect transistors. J Am Chem Soc 123: 11512–11513.    
  • 6. Rowell MW, Topinka MA, McGehee MD, et al. (2006) Organic solar cells with carbon nanotube network electrodes. Appl Phys Lett 88: 233506.    
  • 7. Romero H, Sumanasekera G, Mahan G, et al. (2002) Thermoelectric power of single-walled carbon nanotube films. Phys Rev B 65: 205410.    
  • 8. Avery AD, Zhou BH, Lee J, et al. (2016) Tailored semiconducting carbon nanotube networks with enhanced thermoelectric properties. Nat Energy 1: 16033.
  • 9. Yu C, Shi L, Yao Z, et al. (2005) Thermal conductance and thermopower of an individual single-wall carbon nanotube. Nano Lett 5: 1842–1846.    
  • 10. Itkis ME, Borondics F, Yu A, et al. (2007) Thermal conductivity measurements of semitransparent single-walled carbon nanotube films by a bolometric technique. Nano Lett 7: 900–904.
  • 11. Meng C, Liu C, Fan S (2010) A promising approach to enhanced thermoelectric properties using carbon nanotube networks. Adv Mater 22: 535–539.    
  • 12. Han Z, Fina A (2011) Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci 36: 914–944.
  • 13. Suemori K, Watanabe Y, Hoshino S (2015) Carbon nanotube bundles/polystyrene composites as high-performance flexible thermoelectric materials. Appl Phys Lett 106: 113902.    
  • 14. Nonoguchi Y, Ohashi K, Kanazawa R, et al. (2013) Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants. Sci Rep 3.
  • 15. Freeman DD, Choi K, Yu C (2012) N-type thermoelectric performance of functionalized carbon nanotube-filled polymer composites. PloS one 7: e47822.
  • 16. Yu C, Murali A, Choi K, et al. (2012) Air-stable fabric thermoelectric modules made of N-and P-type carbon nanotubes. Energy Environ Sci 5: 9481–9486.    
  • 17. Toshima N, Oshima K, Anno H, et al. (2015) Novel Hybrid Organic Thermoelectric Materials: Three‐Component Hybrid Films Consisting of a Nanoparticle Polymer Complex, Carbon Nanotubes, and Vinyl Polymer. Adv Mater 27: 2246–2251.    
  • 18. Mai C-K, Russ B, Fronk SL, et al. (2015) Varying the ionic functionalities of conjugated polyelectrolytes leads to both p-and n-type carbon nanotube composites for flexible thermoelectrics. Energy Environ Sci 8: 2341–2346.    
  • 19. Andrei V, Bethke K, Rademann K (2016) Adjusting the thermoelectric properties of copper (i) oxide–graphite–polymer pastes and the applications of such flexible composites. Phys Chem Chem Phys 18: 10700–10707.
  • 20. Antar Z, Feller J-F, Noel H, et al. (2012) Thermoelectric behaviour of melt processed carbon nanotube/graphite/poly (lactic acid) conductive biopolymer nanocomposites (CPC). Mater Lett 67: 210–214.    
  • 21. Pang H, Piao Y-Y, Tan Y-Q, et al. (2013) Thermoelectric behaviour of segregated conductive polymer composites with hybrid fillers of carbon nanotube and bismuth telluride. Mater Lett 107: 150–153.    
  • 22. Liebscher M, Gärtner T, Tzounis L, et al. (2014) Influence of the MWCNT surface functionalization on the thermoelectric properties of melt-mixed polycarbonate composites. Compos Sci Technol 101: 133–138.
  • 23. Andrei V, Bethke K, Rademann K (2014) Copper (I) oxide based thermoelectric powders and pastes with high Seebeck coefficients. Appl Phys Lett 105: 233902.    
  • 24. Krause B, Pötschke P, Ilin E, et al. (2016) Melt mixed SWCNT-polypropylene composites with very low electrical percolation. Polymer. 98: 45-50.    
  • 25. Nonoguchi Y, Nakano M, Murayama T, et al. (2016) Simple Salt‐Coordinated n‐Type Nanocarbon Materials Stable in Air. Adv Funct Mater 26: 3021–3028.    
  • 26. Samokhvalov A, Viglin N, Gizhevskij B, et al. (1993) Low-mobility charge carriers in CuO. Zhurnal Eksperimentalnoi i Teoreticheskoi Fiziki 103: 951–961.
  • 27. Zappa D, Dalola S, Faglia G, et al. (2014) Integration of ZnO and CuO nanowires into a thermoelectric module. Beilstein J Nanotechnol 5: 927–936.    
  • 28. Choi Y, Kim Y, Park, S et al. (2011) Effect of the carbon nanotubes type on the thermoelectric properties of CNT/Nafion nanocomposites. Organic Electronics 12: 2120–2125.    
  • 29. Lee G. W, Park M, Kim J, et al. (2006) Enhanced thermal conductivity of polymer composites filled with hybrid filler. Compos Part A-Appl S 37: 727–734.    


This article has been cited by

  • 1. Jinji Luo, Giacomo Cerretti, Beate Krause, Long Zhang, Thomas Otto, Wolfgang Jenschke, Mathias Ullrich, Wolfgang Tremel, Brigitte Voit, Petra Pötschke, Polypropylene-based melt mixed composites with singlewalled carbon nanotubes for thermoelectric applications: Switching from p-type to n-type by the addition of polyethylene glycol, Polymer, 2016, 10.1016/j.polymer.2016.12.019
  • 2. Mukhlis M. Ismail, Ahmed M. Hussein, Enhance the figure of merit for flexible thermoelectric materials by reducing the screening effect, Applied Nanoscience, 2017, 10.1007/s13204-017-0560-4
  • 3. Jinmi Kim, O Hwan Kwon, Young Hun Kang, Kwang-Suk Jang, Song Yun Cho, Youngjae Yoo, A facile preparation route of n-type carbon buckypaper and its enhanced thermoelectric performance, Composites Science and Technology, 2017, 153, 32, 10.1016/j.compscitech.2017.10.001
  • 4. Anis Mohammadi, Afsaneh Valipouri, Saeed Salimian, Nanoparticle-loaded highly flexible fibrous structures exhibiting desirable thermoelectric properties, Diamond and Related Materials, 2018, 86, 54, 10.1016/j.diamond.2018.04.018
  • 5. Beate Krause, Viktor Bezugly, Vyacheslav Khavrus, Liu Ye, Gianaurelio Cuniberti, Petra Pötschke, Boron Doping of SWCNTs as a Way to Enhance the Thermoelectric Properties of Melt-Mixed Polypropylene/SWCNT Composites, Energies, 2020, 13, 2, 394, 10.3390/en13020394
  • 6. Ran He, Gabi Schierning, Kornelius Nielsch, Thermoelectric Devices: A Review of Devices, Architectures, and Contact Optimization, Advanced Materials Technologies, 2018, 3, 4, 1700256, 10.1002/admt.201700256
  • 7. Beate Krause, Ioannis Konidakis, Mohammad Arjmand, Uttandaraman Sundararaj, Robert Fuge, Marco Liebscher, Silke Hampel, Maxim Klaus, Efthymis Serpetzoglou, Emmanuel Stratakis, Petra Pötschke, Nitrogen-Doped Carbon Nanotube/Polypropylene Composites with Negative Seebeck Coefficient, Journal of Composites Science, 2020, 4, 1, 14, 10.3390/jcs4010014
  • 8. Katharina Kröning, Beate Krause, Petra Pötschke, Bodo Fiedler, Nanocomposites with p- and n-Type Conductivity Controlled by Type and Content of Nanotubes in Thermosets for Thermoelectric Applications, Nanomaterials, 2020, 10, 6, 1144, 10.3390/nano10061144

Reader Comments

your name: *   your email: *  

Copyright Info: 2016, Petra Pötschke, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved