Research article Special Issues

Combination of rice husk ash, bagasse ash, and calcium carbonate for developing unglazed fired clay tile

  • Received: 13 March 2021 Accepted: 28 May 2021 Published: 03 June 2021
  • This research aims at developing unglazed fired clay tiles by utilizing industrial wastes; rice husk ash (RHA), bagasse ash (BGA), calcium carbonate (CC), and fly ash (FA). Brown glass cullet (BGC) has been mixed with these waste materials for reducing firing temperature. In addition, local clay is also used for facilitating specimens' plasticity. Work pieces are molded by uniaxial pressing at 100 bars with dimensions 50 × 100 × 7 mm and fired at 850 and 950 ℃. Formulation mixtures of the experiment are divided into 4 groups. Calcium carbonate (CC), residue from sugar mill plant mixing with local materials, LBC and LWC (Local ball clay and local white clay) have been utilized in group 1. After testing the physical properties of fired specimens, a high bending strength of formula in group 1 has been selected. It is further employed as the basic formula of the next three groups by mixing RHA, BGA, and FA, respectively. The results found that the optimal ratios containing 5% RHA, 5–10% BGA, and 5% FA of group 2, 3, and 4 which fired at 950 ℃ can achieve Thai Industrial Standard (TIS 2508-2555 type BIII) in terms of bending strength and water absorption. Clarifying the color of selected formulas is determined by CIELAB color coordinate. In addition, analyzing the microstructure of selected specimens by scanning electron microscopy (SEM) and X-ray diffraction (XRD) has been conducted. Glassy phase and wollastonite crystal are found in the specimens providing high bending strength.

    Citation: Witsanu Loetchantharangkun, Ubolrat Wangrakdiskul. Combination of rice husk ash, bagasse ash, and calcium carbonate for developing unglazed fired clay tile[J]. AIMS Materials Science, 2021, 8(3): 434-452. doi: 10.3934/matersci.2021027

    Related Papers:

  • This research aims at developing unglazed fired clay tiles by utilizing industrial wastes; rice husk ash (RHA), bagasse ash (BGA), calcium carbonate (CC), and fly ash (FA). Brown glass cullet (BGC) has been mixed with these waste materials for reducing firing temperature. In addition, local clay is also used for facilitating specimens' plasticity. Work pieces are molded by uniaxial pressing at 100 bars with dimensions 50 × 100 × 7 mm and fired at 850 and 950 ℃. Formulation mixtures of the experiment are divided into 4 groups. Calcium carbonate (CC), residue from sugar mill plant mixing with local materials, LBC and LWC (Local ball clay and local white clay) have been utilized in group 1. After testing the physical properties of fired specimens, a high bending strength of formula in group 1 has been selected. It is further employed as the basic formula of the next three groups by mixing RHA, BGA, and FA, respectively. The results found that the optimal ratios containing 5% RHA, 5–10% BGA, and 5% FA of group 2, 3, and 4 which fired at 950 ℃ can achieve Thai Industrial Standard (TIS 2508-2555 type BIII) in terms of bending strength and water absorption. Clarifying the color of selected formulas is determined by CIELAB color coordinate. In addition, analyzing the microstructure of selected specimens by scanning electron microscopy (SEM) and X-ray diffraction (XRD) has been conducted. Glassy phase and wollastonite crystal are found in the specimens providing high bending strength.



    加载中


    [1] Modi V, Bhardwaj A, Choudhary R, et al. (2016) Preparation & characterization of vitrified tiles using rice husk ash & glass cullet. JETIR 3: 394-300.
    [2] Agricultural Statistics of Thailand. Office of Agricultural Economics, 2019. Available from: http://www.oae.go.th/assets/portals/1/files/jounal/2563/yearbook62edit.pdf.
    [3] Factory information. Department of Industrial Works, 2020. Available from: http://userdb.diw.go.th/results1.asp.
    [4] Choojit S (2020) Isolation of Actinomycetes and xylanase production by using sugarcane bagasse as a carbon source. STIJ 1: 13-21.
    [5] Department of Alternative Energy Development and Efficiency. Ministry of Energy, 2020. Available from: https://www.dede.go.th/ewt_news.php?nid=41810.
    [6] Thailand State of Pollution Report 2017. Pollution Control Department, 2017. Available from: https://www.pcd.go.th/publication/4175/.
    [7] Saleem MA, Kazmi SMS, Abbas S, et al. (2017) Clay bricks prepared with sugarcane bagasse and rice husk ash—A sustainable solution. MATEC Web of Conferences, 120: 03001. doi: 10.1051/matecconf/201712003001
    [8] Schettino MAS, Holanda JNF (2015) Characterization of sugarcane bagasse ash waste for its use in ceramic floor tile. Procedia Mater Sci 8: 190-196. doi: 10.1016/j.mspro.2015.04.063
    [9] Schettino MA, Holanda JN (2015) Processing of porcelain stoneware tile using sugarcane bagasse ash waste. Process Appl Ceram 9: 17-22. doi: 10.2298/PAC1501017S
    [10] Phonphuak N, Chindaprasirt P (2018) Utilization of sugarcane bagasse ash to improve properties of fired clay brick. Chiang Mai J Sci 45: 1855-1862.
    [11] Kim BH, Kang BA, Yun YH, et al. (2004) Chemical durability of β-wollastonite-reinforced glass-ceramics prepared from waste fluorescent glass and calcium carbonate. Mater Sci-Pol 22: 83-91.
    [12] Serra MF, Picicco M, Moyas E, et al. (2012) Talc, spodumene and calcium carbonate effect as secondary fluxes in triaxial ceramic properties. Procedia Mater Sci 1: 397-402. doi: 10.1016/j.mspro.2012.06.053
    [13] Lira C, Fredel MC, da Silveira MD, et al. (1998) Effect of carbonates on firing shrinkage and on moisture expansion of porous ceramic tiles. V World Congress on Ceramic Tile Quality-Qualicer, 98: 101-106.
    [14] Sobrosa FZ, Stochero, NP, Marangon E, et al. (2017) Development of refractory ceramics from residual silica derived from rice husk ash. Ceram Int 43: 7142-7146. doi: 10.1016/j.ceramint.2017.02.147
    [15] Abeid S, Park, SE (2018) Suitability of vermiculite and rice husk ash as raw materials for production of ceramic tiles. Int J Mater Sci Appl 7: 39-45.
    [16] Muhamad K, Zainol NZ, Yahya N, et al. (2020) Influence of rice husk ash (RHA) on performance of green concrete roof tile in application of green building. IOP Conference Series Earth and Environmental Science, 476: 012038. doi: 10.1088/1755-1315/476/1/012038
    [17] Jamo HU, Auwalu IA, Mahmoud BA, et al. (2019). Modulus of rupture (MOR) of porcelain by substitution of quartz with rice husk ash (RHA) and palm oil fuel ash (POFA) at different temperatures. Sci World J 14: 16-19.
    [18] More AS, Tarade A, Anant A (2014) Assessment of suitability of fly ash and rice husk ash burnt clay bricks. IJSRP 4: 1-6.
    [19] Castellanos AG, Mawson H, Burke V, et al. (2017) Fly-ash cenosphere/clay blended composites for impact resistant tiles. Constr Build Mater 156: 307-313. doi: 10.1016/j.conbuildmat.2017.08.151
    [20] Ponce Peña P, González Lozano MA, Rodríguez Pulido A, et al. (2016) Effect of crushed glass cullet sizes on physical and mechanical properties of red clay bricks. Adv Mater Sci Eng 2016: 2842969. doi: 10.1155/2016/2842969
    [21] Karayannis V, Moutsatsou A, Domopoulou A, et al. (2017) Fired ceramics 100% from lignite fly ash and waste glass cullet mixtures. J Build Eng 14: 1-6. doi: 10.1016/j.jobe.2017.09.006
    [22] Chidiac SE, Federico LM (2007) Effects of waste glass additions on the properties and durability of fired clay brick. Can J Civil Eng 34: 1458-1466. doi: 10.1139/L07-120
    [23] Demir I (2009) Reuse of waste glass in building brick production. Waste Manage Res 27: 572-577. doi: 10.1177/0734242X08096528
    [24] Wangrakdiskul U, Loetchantharangkun W (2019) Utilizing green glass cullet, local ball clay and white clay for producing light greenish brown color wall tile. EJEST 2: 23-30.
    [25] Thai Industrial Standard 2508-2555. Ministry of Industry, 2012. Available from: http://www.ratchakitcha.soc.go.th/DATA/PDF/2555/E/093/11.PDF.
    [26] Bragança SR, Bergmann CP (2005) Waste glass in porcelain. Mater Res 8: 39-44. doi: 10.1590/S1516-14392005000100008
    [27] Maingam P, Wangrakdiskul U, Piyarat N (2021) Potential of alternative waste materials: rice husk ash and waste glass cullet with boric acid addition for low-fired unglazed tiles. AIMS Mater Sci 8: 283-300. doi: 10.3934/matersci.2021019
    [28] Wangrakdiskul U, Maingam P, Piyarat N (2020) Eco-friendly fired clay tiles with greenish and greyish colored incorporating alternative recycled waste materials. Key Eng Mater 856: 376-383. doi: 10.4028/www.scientific.net/KEM.856.376
    [29] Phonphuak N, Kanyakam S, Chindaprasirt P (2016) Utilization of waste glass to enhance physical-mechanical properties of fired clay brick. J Clean Prod 112: 3057-3062. doi: 10.1016/j.jclepro.2015.10.084
    [30] Liu J, Li Y, Li Y, et al. (2016) Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agent. Ceram Int 42: 8221-8228. doi: 10.1016/j.ceramint.2016.02.032
    [31] Nogueira AD, Della Bona A (2013) The effect of a coupling medium on color and translucency of CAD-CAM ceramics. J Dent 41: e18-e23. doi: 10.1016/j.jdent.2013.02.005
    [32] Hariharan V, Shanmugam M, Amutha K, et al. (2014) Preparation and characterization of ceramic products using sugarcane bagasse ash waste. Res J Recent Sci 3: 2277-2502.
  • Reader Comments
  • © 2021 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(2362) PDF downloads(114) Cited by(0)

Article outline

Figures and Tables

Figures(4)  /  Tables(9)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog