Review Topical Sections

A systematic review on recent progress in advanced joining techniques of the lightweight materials

  • We are living in a time where the emphasis is given on the development of new and improved materials having high strength and are correspondingly light in weight for application in fields such as transportation, aerospace, medical and other such related areas. These new materials developed need to be processed and joined with oneself and other materials as well. The paper presents a brief understanding of the advanced joining processes namely friction stir welding, microwave hybrid heating, electron beam welding, laser beam welding, thermo-hydrogenated diffusion bonding, electromagnetic welding and ultra sonic welding. The purpose of these advanced joining techniques is to increase the efficiency of the joining process and prevent failure. The objective of this review paper is to provide an insight into the principles, current trends and research gaps in advanced joining techniques.

    Citation: Shashi Bahl, Tarunpreet Singh, Virinder Kumar, Shankar Sehgal, Ashok Kumar Bagha. A systematic review on recent progress in advanced joining techniques of the lightweight materials[J]. AIMS Materials Science, 2021, 8(1): 62-81. doi: 10.3934/matersci.2021005

    Related Papers:

    [1] Dimitris Zavras, Michael Chletsos . The impact of the COVID-19 pandemic on catastrophic health expenditure in Greece. National Accounting Review, 2023, 5(4): 338-355. doi: 10.3934/NAR.2023020
    [2] Lorna Katusiime . COVID-19 and the effect of central bank intervention on exchange rate volatility in developing countries: The case of Uganda. National Accounting Review, 2023, 5(1): 23-37. doi: 10.3934/NAR.2023002
    [3] Fausto Corradin, Monica Billio, Roberto Casarin . Forecasting Economic Indicators with Robust Factor Models. National Accounting Review, 2022, 4(2): 167-190. doi: 10.3934/NAR.2022010
    [4] Demetrio Panarello, Giorgio Tassinari . The consequences of COVID-19 on older adults: evidence from the SHARE Corona Survey. National Accounting Review, 2022, 4(1): 56-73. doi: 10.3934/NAR.2022004
    [5] Tetiana But . Migration as an economic component of the European countries' development. National Accounting Review, 2024, 6(4): 498-530. doi: 10.3934/NAR.2024023
    [6] Mustafa Tevfik Kartal . Do activities of foreign investors affect main stock exchange indices? Evidence from Turkey before and in time of Covid-19 pandemic. National Accounting Review, 2020, 2(4): 384-401. doi: 10.3934/NAR.2020023
    [7] Ragnar Nymoen . Economic Covid-19 effects analysed by macro econometric models—the case of Norway. National Accounting Review, 2023, 5(1): 1-22. doi: 10.3934/NAR.2023001
    [8] Alberto Bernardi, Daniela Bragoli, Davide Fedreghini, Tommaso Ganugi, Giovanni Marseguerra . COVID-19 and firms' financial health in Brescia: a simulation with Logistic regression and neural networks. National Accounting Review, 2021, 3(3): 293-309. doi: 10.3934/NAR.2021015
    [9] Yanting Xu, Tinghui Li . Measuring digital economy in China. National Accounting Review, 2022, 4(3): 251-272. doi: 10.3934/NAR.2022015
    [10] Laura Grassini . Statistical features and economic impact of Covid-19. National Accounting Review, 2023, 5(1): 38-40. doi: 10.3934/NAR.2023003
  • We are living in a time where the emphasis is given on the development of new and improved materials having high strength and are correspondingly light in weight for application in fields such as transportation, aerospace, medical and other such related areas. These new materials developed need to be processed and joined with oneself and other materials as well. The paper presents a brief understanding of the advanced joining processes namely friction stir welding, microwave hybrid heating, electron beam welding, laser beam welding, thermo-hydrogenated diffusion bonding, electromagnetic welding and ultra sonic welding. The purpose of these advanced joining techniques is to increase the efficiency of the joining process and prevent failure. The objective of this review paper is to provide an insight into the principles, current trends and research gaps in advanced joining techniques.



    The term "socioeconomic development" refers to the process of social and economic development in society (Palliyaguru et al., 2013). Economic development refers to efforts aimed at improving the economic well-being and quality of life of a community by creating and/or retaining jobs and increasing incomes (Yonk et al., 2017). From a macro-perspective, social development can be considered as policies aimed at improving the livelihood of the individual through poverty reduction and empowerment (Hasmath and Hsu, 2007).

    That is, on an individual level, improvements in socioeconomic status, measured by factors such as income, wealth, education, and occupation, may reflect socioeconomic development, while quality of life, standards of living, and general health constitute additional factors (Roztocki and Weistroffer, 2016).

    Socioeconomic development depends on several factors such as investments from the private and public sectors in education, health, safety, infrastructure, science and technological innovation, and private companies (Cai et al., 2019; Botelho and Pfister, 2011).

    Human capital formation and aggregation constitute the most important determinants of socioeconomic development; they complement the adoption of new technologies, foster innovation, and facilitate industrialization (Chen et al., 2021). Indeed, there is a high degree of consensus amongst development economists that investments in human capital, namely education and health, are crucial for the social and economic development of nations (Ajakaiye and Kimenyi, 2011).

    Education is an important driver of socioeconomic development since it influences adults' physical, mental, and emotional health, which in turn, influences labor force supply, productivity, and innovation (Smith et al., 2016).

    Health also substantially contributes to socioeconomic development (Kluge et al., 2018) via productivity. The size, age, sex structure, labor force components, and productivity levels of the population are determined to a large extent by morbidity, mortality, and fertility, each of which is directly impacted by improved health. In addition, better personal healthcare results in higher productivity of the individual and collectively raises the national income (Christian et al., 1977). Furthermore, individuals of better health, who live longer, have greater incentives to invest in developing their skills, because they expect to reap the benefits of such investments over longer periods. Moreover, increased schooling contributes to higher productivity, and in turn, higher income, while good health contributes to school attendance (Bloom and Canning, 2000). Additionally, the population's health impacts the rate of accumulation of physical capital and its marginal productivity. A vicious circle linking low income, low savings, and a low rate of income growth may be formed due to poor health (Chapter, 1973). Thus, given that health is a powerful force for individual and national economic development, it is not surprising that it is characterized as an "economic engine" (Mirvis et al., 2008); in this sense, poverty can be considered as a consequence of poor health (Feachem, 2000).

    In addition, due to the link between healthcare access and health (Gu et al., 2009), access to healthcare is considered a major element fostering socioeconomic development (Balen et al., 2013). That is, limited access to healthcare represents a major barrier to social and economic development across the globe (Madanian et al., 2019).

    However, when studying to what the extent healthcare access may be considered an important element of socioeconomic development, the prevailing circumstances should not be neglected. Thus, one should first highlight that the coronavirus disease 2019 (COVID-19) pandemic has had a tremendous impact on global socio-economic development (Liu et al., 2021) and tested many sectors such as health, education, transport, trade, and finance (Seghier, 2020). The COVID-19 pandemic started as a health crisis but swiftly turned into an economic crisis (Jan et al., 2021). Government's responses to the COVID-19 pandemic involved the adoption of a "mix" of tools in several policy areas such as health, medicine, social fields, and economics, rather than just a single tool (Capano et al., 2020). The main purposes of these responses were to ensure social distancing between people to limit the virus spread on the one hand, while minimizing adverse economic impacts on the other hand (Ashraf, 2020).

    Although the restrictions introduced in each country are different and depend on each country's situation, the national measures can generally be classified into three major categories: travel restrictions, shutdown of facilities, and social distancing. Travel restriction measures including travel bans from other countries aim to limit the virus spread across countries' borders, while domestic travel restrictions aim to limit the virus spread among a country's citizens. The facility shutdown measures aim to further limit domestic outbreaks by reducing crowds in non-essential places such as bars, restaurants, and festivals, as well as prioritizing the safety of children by closing schools. At the highest level, namely the social distancing measures, stay-at-home orders come into effect for specific regions or a whole country (Thu et al., 2020).

    The measures so far implemented to limit the virus spread has had a tremendous impact on the global economy. Although a number of major epidemics/pandemics have hit in the last 40 years, none have led to consequences for the world economy as severe as those of the COVID-19 pandemic (Gössling et al., 2021). The effects of the COVID-19 pandemic on the economy can be felt through four main channels: (a) supply, (b) demand, (c) uncertainty, and (d) international financial markets (Petrakis and Kostis, 2020). On the one hand, the COVID-19 crisis unquestionably constitutes a negative demand shock, which for fixed prices and incomes, has reduced household spending, and on the other hand, it also unquestionably constitutes a negative supply shock that has reduced firms' ability to maintain production at pre-pandemic costs and quantities (Baqaee and Farhi, 2021). In addition, ongoing uncertainty leads to reduced or delayed consumption of goods and services, as well as to delayed or foregone investments (Boone et al., 2020); the COVID-19 pandemic has increased economic uncertainty and is among the biggest threats to the global economy (Yfantopoulos, 2021). Furthermore, the pandemic has severely affected global financial markets (Pak et al., 2020). Developed countries' financial markets are mainly affected through supply reduction, demand reduction, and economic instability, while developing nations are mainly affected through confidence and expectations, changes in consumption patterns, and the bandwagon effect (Zhao et al., 2022).

    A second, related point to consider is the influence of the COVID-19 pandemic on the healthcare sector, specifically the disruptions to health services worldwide (García-Azorín et al., 2021). The restrictions came into effect to limit the virus spread in several countries, such as temporarily closing or limiting access to healthcare facilities and services, reallocating healthcare resources, and interrupting screening programs, have disrupted the delivery of care (Boulton, 2020). Disruption to healthcare access, i.e., inability to receive appropriate medical care (Ballesio et al., 2021), has been brought about due to the pandemic (Whaley et al., 2021).

    In Greece, the first COVID-19 case was diagnosed on 26 February 2020, and the first death was reported on 12 March 2020. From an epidemiologic perspective, as of mid-September 2020, Greece was not defined as a country with a trend of concern according to the European Centre for Disease Prevention and Control (ECDC) criteria, but had observed a strong increasing trend in intensive care units (ICU) admissions, and the ECDC model also highlighted Greece as having the potential for a large resurgence (European Centre for Disease Prevention and Control, 2020). At the onset of COVID-19, strict containment measures came into effect, including closures of schools, universities, non-essential shops, cafés, restaurants, and public spaces, as well as movement restrictions including a ban on gatherings and travel, during the first wave (March 2020). New measures then came into effect during the second wave (November 2020) in a period (reference period of this study) when the epidemiologic picture was worse. Early concerns regarding the influence of the pandemic on the Greek economy focused on the high levels of uncertainty (Adrikopoulou, 2020) and the reduction of exports, travel receipts, shipping receipts, consumer and business confidence, international oil prices, production, and employment as a result of measures implemented to limit the spread of the coronavirus (Petrakis and Kostis, 2020).

    According to Sen (1999), development is an integrated process of expansion of substantive freedoms, such as access to healthcare. However, Acemoglu and Johnson (2007) argue that there is no evidence that improvements in health outcomes, such as life expectancy, can lead to faster growth of income per capita or output per worker. Given the abovementioned debate, and because, on the one hand, healthcare access constitutes one of the major challenges facing health systems worldwide during the COVID-19 pandemic (Androutsou et al., 2021), while on the other hand, the pandemic has posed a severe threat to socioeconomic development (Shi et al., 2021), this study aimed to investigate to what extent healthcare access may be considered important to the European Union (EU) socioeconomic development, from Greece's residents' perspectives.

    For this study, we used data from the Eurobarometer 94.2 (European Commission and European Parliament, 2021). The survey covered populations resident in each of the 27 EU member states. Fieldwork was conducted between 20 November and 21 December 2020 among 27,213 individuals aged 15 years and over.

    In Greece, interviews were conducted online. The respondents were recruited by telephone via a dual-frame random digit dialing (RDD) sample design; telephone numbers were drawn from the national telephone numbering plans. However, the response rate was not sufficiently large to achieve the target sample size in the fieldwork period, so the sample was supplemented with a non-probabilistic sample randomly drawn from Kantar's LifePoints panel. The sample size was n = 1002. Fieldwork was conducted between 3 December and 21 December 2020 (European Parliament, 2020).

    To study whether the respondents considered healthcare access as an important element of the EU's social and economic development, we fitted a logistic model using as the dependent variable the question. At present, would you say that, in general, things are going in the right or wrong direction in the EU?

    The dependent variable fits the definition of societal pessimism, i.e., the sentiment that one's society is in decline (Steenvoorden, 2015). Because societal pessimism is caused by political instability and/or economic recession (Smith, 2017) it constitutes a reflection of the economic and political context. Economic growth is included in the factors that explain societal pessimism. The association between economic growth and societal pessimism is negative, namely, rising economic growth reduces societal pessimism (Steenvoorden and van der Meer, 2017). At this point, we should note that economic growth can occur without development, but development without growth is unlikely. Economic growth here refers to an increase in national or per capita income and gross national product (GNP) (Nnadozie and Jerome, 2019). In addition, we should also note that a person answering the question under study, i.e., a country's direction, will have to vector in many aspects that are important for the future of his country, i.e., the state of the economy, national security, social cohesion, good governance, the environment. Individuals may also be concerned about employment, healthcare, working conditions, the social climate, and the inequalities, etc. (Van Houwelingen, 2016).

    The respondents were also asked, "In your opinion, which elements are the most important for the EU's economic and social development? Firstly? And then (maximum 3 answers)?" Access to quality healthcare was included among the potential answers. At this point it should be mentioned that "quality healthcare means doing the right thing, at the right time, in the right way, for the right person—and having the best possible results (Agency for Healthcare Research and Quality, 2000)".

    As potential predictors in the analysis, the following variables were used: (a) geographic region, (b) access to quality healthcare as an important element for the EU's social and economic development, (c) age, (d) gender, (e) social class; the respondents were asked to what social class belong, e.g., working class, lower middle class, middle class, upper middle class, or upper class. The abovementioned question refers to the subjective class identification, namely to the individual's perception of his own position in the status hierarchy (Franzini et al., 2006). The sociodemographic characteristics were used as potential predictors mainly due to their impact on economic knowledge; this point is of considerable importance because economic knowledge has a direct and significant effect on public opinion about many economic issues (Walstad, 1997). The extent to which more (or less) decision-making should take place at the European level for dealing with health issues and the index of political interest were included as additional potential predictors in the analysis. Only two respondents declared that "no change is needed" regarding the extent to which more (or less) decision-making should take place at the European level for dealing with health issues; hence, these respondents were excluded from the analysis. The index of political interest constitutes a synthesis of three questions: "When you get together with friends or relatives, would you say that you frequently, occasionally, or never discuss: 1) national political matters, 2) European political matters, or 3) local political matters?"

    The Helmert contrast was applied to the "social class" and the "index of political interest" variables, which compares each category of an ordinal variable (except the last) with the mean of the subsequent levels. An indicator contrast, meanwhile, was applied to the "region" variable, which compares the reference category of a nominal variable with the remaining categories. The binary variables "access to quality healthcare", "gender" and "extent to which more (or less) decision-making should take place at the European level for dealing with health issues" were treated as such.

    The model's goodness of fit was tested using the Hosmer and Lemeshow test, the calibration of the model using the calibration belt test, and its specification error using the link test; if y=f(xβ) is the model, where x are the predictors and ˆβ the parameter estimates, the link test calculates the variables h=xˆβ and h2 = h2. The model is then refitted with these two variables. If the model is specified correctly, the h2 would be non-significant.

    Eurobarometer post-stratification weighting was used for the descriptive statistics; the weight used reproduces the real number of cases for the country (European Commission and European Parliament, 2021).

    The STATA 17 statistical software package was used for the analysis. Specifically, the commands desmat (Hendrickx, 1999) logistic, link test, and calibrationbelt (Nattino et al., 2017) were used.

    Regarding gender, approximately 52 percent (51.91%) of the respondents were female and 48 percent (48.09%) were male. The mean age of the respondents was 46.18 years (±14.41).

    The regional distribution of the sample is presented in Table 1.

    Table 1.  Regional distribution of the sample.
    Geographic region % (n)
    Attica 37.52 (470)
    Create 6.23 (84)
    Eastern Macedonia-Thrace 6.05 (47)
    Central Macedonia 18.83 (171)
    Western Macedonia 2.71 (24)
    Epirus 3.4 (15)
    Thessaly 7.25 (41)
    Western Greece 6.59 (57)
    Central Greece 5.61 (45)
    Peloponnese 5.81 (48)

     | Show Table
    DownLoad: CSV

    The sample distribution related to social class is presented in Table 2, which shows that most respondents defined themselves as being in the middle class.

    Table 2.  Sample distribution related to social class.
    Social class % (n)
    Working class 18.10 (189)
    Lower middle class 27.41 (265)
    Middle class 47.29 (495)
    Upper middle class 6.08 (45)
    Higher class 1.12 (6)

     | Show Table
    DownLoad: CSV

    Approximately 56 percent (55.82%) of the respondents declared that, in general, things in the EU are going in the wrong direction, while approximately 44 percent (44.12%) of the respondents declared that, in general, they are going in the right direction. Only 0.05% of the respondents chose "neither" (since only one respondent answered this option, it was excluded from the analysis).

    Table 3 presents the percentages of those who declared that more (or less) decision-making should take place at the European level for dealing with health issues.

    Table 3.  Extent to which more (or less) decision-making should take place at the European level for dealing with health issues.
    Extent to which more (or less) decision-making should take place at the European level for dealing with health issues % (n)
    More decision-making 80.72 (811)
    Less decision-making 19.14 (188)
    No change is needed 0.14 (2)

     | Show Table
    DownLoad: CSV

    According to Table 3, most respondents declared that more decision-making should take place at the European level for dealing with health issues.

    The sample distribution related to the index of political interest is presented in Table 4.

    Table 4.  Index of political interest.
    Index of political interest % (n)
    Not at all interested in politics 3.46 (38)
    Slightly interested in politics 12.65 (145)
    Moderately interested in politics 47.91 (520)
    Strongly interested in politics 35.98 (299)

     | Show Table
    DownLoad: CSV

    According to Table 4, the majority of respondents were moderately interested in politics.

    Approximately 48 percent (47.57%) of the respondents considered that access to quality healthcare is an important element of the EU's economic and social development (Table 5).

    Table 5.  Important elements for the EU's economic and social development1.
    Element Firstly % (n) And then % (n) Total % (n) Rank
    Equal opportunities and access to the labor market 28.07 (259) 34.38 (329) 62.45 (588) 1
    Fair working conditions 9.26 (111) 31.03 (330) 40.29 (441) 4
    Social protection and inclusion 4.76 (54) 22.27 (209) 27.04 (263) 5
    Access to quality healthcare 7.22 (77) 40.35 (368) 47.57 (445) 3
    Freedom of movement of workers and learners 5.65 (48) 14.41 (138) 20.06 (186) 8
    The standard of living of people in the EU 31.41 (298) 24.62 (273) 56.03 (571) 2
    The quality of infrastructure in the EU 2.54 (43) 18.05 (174) 20.59 (217) 7
    The EU's capacity for research and innovation 4.04 (43) 11.99 (117) 16.03 (160) 9
    The skills and talents of people in the EU 1.44 (20) 12.88 (118) 14.32 (138) 10
    Environmental responsibility and climate action 3.97 (31) 19.55(190) 23.52 (221) 6
    Rights of minorities and protection against discrimination 1.64 (18) 8.02 (95) 9.65 (113) 11

     | Show Table
    DownLoad: CSV

    1 The data are available by GESIS-Leibniz Institute for the Social Sciences, https://doi.org/10.4232/1.13722

    According to Table 5, access to quality healthcare was ranked third highest in Greece (47.57%). Portugal ranked it as most important (69.25%), while Sweden ranked it with the lowest importance (26.65%). Overall, approximately 40 percent (40.38%) of EU residents considered that access to healthcare is an important element of the EU's socio-economic development, which places Greece's residents above average in terms of their prioritization of this factor.

    According to the logistic regression model (Table 6), working-class respondents considered that, in general, things in the EU are going in the wrong direction (odds ratio (OR) = 0.43, 95% confidence interval (CI): 0.25–0.74) when compared to respondents of higher social classes. The same holds for lower middle class respondents when compared to respondents of higher classes (OR = 0.41, 95% CI: 0.21–0.79). In the same vein, respondents who answered that access to quality healthcare is an important element of the EU's social and economic development considered that, in general, things in the EU are going in the wrong direction (OR = 0.70, 95% CI: 0.54–0.91). However, those who declared that more decision-making for dealing with health issues should take place at the European level believed that things in the EU are generally going in the right direction (OR = 2.37, 95% CI: 1.67-3.37).

    Table 6.  Logistic regression model.
    Variable OR p 95% CI
    Social class < 0.001
    Working class of society vs. subsequent levels 0.43 0.003 0.25 0.74
    Lower middle class of society vs. subsequent levels 0.41 0.008 0.21 0.79
    Middle class of society vs. subsequent levels 0.44 0.086 0.17 1.12
    Upper middle class of society vs. higher class of society 1.45 0.688 0.23 9.04
    Access to quality healthcare 0.70 0.008 0.54 0.91
    Extent to which more (or less) decision-making should take place at the European level for dealing with health issues 2.37 < 0.001 1.67 3.37
    Constant 0.63 0.062 0.38 1.02

     | Show Table
    DownLoad: CSV

    Geographic region (p = 0.702), gender (p = 0.931), age (p = 0.360), and the index of political interest (p = 0.389) were not statistically significant, meaning that these variables do not influence the respondents' opinions regarding the direction in which the EU is heading.

    The Hosmer and Lemeshow test indicated a good fit (p = 0.603) and the calibration belt test indicated good calibration (p = 0.462), while according to the link test (Table 7), the model did not suffer from specification error.

    Table 7.  Link test.
    Variable Coefficient p 95% CI
    h 0.95 < 0.001 0.65 1.25
    h2 −0.13 0.460 −0.46 0.21
    Constant 0.02 0.771 −0.13 0.17

     | Show Table
    DownLoad: CSV

    In the descriptive analysis, the majority of the respondents declared that, in general, things in the EU are going in the wrong direction. A probable reason may be the challenges facing the EU, i.e., inequalities, poverty, unemployment, or social and economic disparities (Dumitrescu, 2020); the available evidence indicates that the COVID-19 pandemic has tended to exacerbate previously existing social and economic disparities rather than create novel inequities (Flor et al., 2022). As mentioned in the introduction, socioeconomic development was influenced by the pandemic (Zhang et al., 2021) through (a) supply, i.e., through significant disruptions in the global supply chain, factory closures, or cutbacks in many service sector activities, (b) demand, i.e., through a decline in business travel and tourism, declines in education services, or declines in entertainment and leisure services, and (c) uncertainty, i.e., uncertainty leading to reduced or delayed consumption of goods and services, and delayed or foregone investment (Boone, 2020). Consequently, the pandemic affected the economies of all EU member states, albeit to a different degree (Dauderstädt, 2022). At the time of data collection, most countries around the globe were projected to face significant GDP contractions in 2020 (Mohapatra, 2021), and early baseline forecasts of the World Bank envisioned a 5.2 percent contraction in global GDP in 2020—the deepest global recession in eight decades (World Bank, 2020). A second probable reason may be that during the second wave of COVID-19 transmission in the European Region, the all-cause mortality increased to a consistent and substantial level (Nørgaard et al., 2021). A third reason may be the negative influence of the pandemic on the Greek economy. In Greece, the business and workplace suspensions implemented during the first and second waves of the pandemic severely impacted the Greek economy. Specifically, the country's economy contracted by 8.2% in 2020 due to the impact of pandemic and the containment measures that came into effect to curb infections, especially during the second and fourth quarters of 2020. The economic impact of the pandemic on Greece has been substantial, particularly due to the importance of the tourism sector and the small size of the majority of enterprises. Yet, a timely increase in public investments and strong construction activity, which continued to operate with limited restrictions during the lockdown periods, have resulted in a relatively small impact on total investment. The unemployment rate has remained at 16.3% as employment support measures have prevented large-scale dismissals (European Commission, Directorate General for Economic and Financial Affairs, 2021).

    With respect to the descriptive results regarding healthcare access, since in economic terms it increases productivity and life expectancy, thereby allowing individuals to earn more for a longer period (Pal, 2009), it is not surprising that it was included among the most important elements of the EU's social and economic development. In other words, human capital is a direct input into the production process; a high incidence of morbidity lowers labor productivity and reduces the number of days worked. Thus, programs which result in improved health are likely to positively impact the level of output (Griffin, 1999). Afterall, socioeconomic development is generally viewed as improvements in the living standards of individuals and communities, which healthcare access can clearly be seen to support (Palvia et al., 2018). So, though there is still debate among economists over whether expansion of healthcare access is a significant factor in boosting economic development (Subramanian, 2020), the public has no such doubt.

    On the basis of the model's results, geographic region, gender, age, and the index of political interest were not statistically significant. These findings confirm the literature; according to de Vries and Hoffmann (2020) there is little difference between the age groups regarding societal pessimism, while the abovementioned difference is slight between women and men.

    The influence of social class may reflect differences in the economic knowledge held by different groups of the population (Walstad, 1997). This point is of great importance for this study since the dependent variable of our analysis refers to the EU as a whole and not to Greece. In addition, it may reflect a vague sense of discomfort with current societal developments, a feeling that is growing in many European states and particularly affecting lower social classes of society (Aschauer, 2014).

    The extent to which more (or less) decision-making should take place at the European level for dealing with health issues is positively associated with the outcome variable, because health outcomes in the European Union are good by international standards. This reflects the alignment of the objectives of improving health and well-being with the overall socioeconomic objective of prosperity and suggests that a radical overhaul of EU health policy is not needed. However, the high COVID-19 mortality, the postponement of non-COVID-19 care and the increase in mental distress have led to deterioration in overall health performance (Bucher, 2022).

    The negative influence of difficulty in accessing quality healthcare on the direction that the EU is heading in, which represents a limit on socioeconomic development, may relate to the current healthcare access disruption in several countries around the globe. As mentioned in the Introduction, disruption to healthcare access has emerged as a global consequence of the pandemic (Brislane et al., 2021). It is evident that inability to access healthcare is included among the effects of the lockdown policies implemented worldwide (Nshimyiryo et al., 2021; Moynihan et al., 2021). Healthcare access disruption, on the one hand, is linked to demand side factors, such as patients' inability to access healthcare services due to transport restrictions during the lockdowns, reduced healthcare-seeking behavior due to fear or to preserve health system capacity, and deepening poverty that may limit the ability of households to cover out-of-pocket costs. On the other hand, meanwhile, it is linked with supply side factors such as supply chain interruptions of essential medicines and other health products, diversion of health resources from other services to the COVID-19 response, and paused provision of certain services to curb the spread of the virus (Krubiner et al., 2020).

    With regard to the demand side factors, the pandemic and related measures that came into effect to limit the virus spread resulted in a substantial increase in unemployment (Settersten et al., 2020), which in turn, has translated into an immediate decrease in household incomes (Sarkar et al., 2021) and loss of health insurance coverage (Rivera et al., 2020). With regard to the supply side factors, meanwhile, the COVID-19 crisis is considered a direct threat to global health systems, especially for nations with small and weaker health systems (Nteka, 2021).

    Evidence from the EU-Statistic on Income and Living Conditions (EU-SILC) 2020, conducted in Greece, indicates that approximately 37 percent (36.9%) of the respondents (individuals aged 16 and over) stated that they had a health problem, during the last 12 months, they really required medical examination or treatment, but they did not seek either due to the COVID-19 pandemic (Hellenic Statistical Authority, 2021). Thus, though the unmet healthcare need is a subjective measure of access to healthcare (Fjær et al., 2017), one may argue that the pandemic further impacted access to healthcare in Greece, beyond any reported impact.

    Evidence that the COVID-19 pandemic negatively influenced incomes in Greece (Zavras, 2021) partly explains pandemic-related disruption to healthcare via the economic impact of COVID-19 in Greece. To avoid being overwhelmed by the sudden increase in the demand for healthcare, Greece's public healthcare system, being ill-prepared and poorly resourced, responded to the COVID-19 pandemic by ceasing most of its regular activities and redirecting available resources to COVID-19 treatment (Kondilis et al., 2021). That is to say, clinics have been closed and wards evacuated. Some of these have been reassigned to the care of COVID-19 patients, while others have been converted into COVID-19 ICU wards. Scheduled surgical operations and outpatient specialist hospital appointments have been canceled, and only emergencies continue to be seen (Giannopoulou and Tsobanoglou, 2020). Greece was a country that to a large extent was unprepared during the first wave of the pandemic. In addition, during the second pandemic wave, hospitals were under immense pressure (Farsalinos et al., 2021).

    The previous points are consistent with the two core policy instruments of socioeconomic development. These include the "equity-oriented approach" and the "basic needs" approach. Based on the former, redistribution of income (or consumption) to the poverty groups through the fiscal system or through the direct allocation of consumer goods is required. Based on the latter, meeting needs such as food, nutrition, health, education, and shelter may be achieved by various combinations of growth, redistribution of assets and income, and restructuring of production (Khan, 1991).

    Although, the model gives a static result, we may argue that "sustainable development is not a fixed state of harmony, but rather a process of change in which the exploitation of resources, the direction of investments, the orientation of technological development, and institutional change are made consistent with future as well as present needs" (World Commission on Environment and Development, 1987).

    The main limitation of the study is the limited number of independent variables used in the model. However, information regarding additional potential predictors was not available. Due to this limitation, the study provides evidence regarding the healthcare dimension of socioeconomic development rather than evidence regarding multiple dimensions. Nevertheless, because human capital formation and aggregation constitute the most important determinants of socioeconomic development, we may argue that the results of the model justify healthcare access as an important element of the EU's socioeconomic development.

    Summarizing the findings of this research, public opinion regarding the direction that society is heading in reflects feelings of uneasiness, anxiety, or uncertainty when people think about the future development of their society (European Foundation for the Improvement of Living and Working Conditions, 2021). The respondents recognize access to quality healthcare as a major driver of socioeconomic development. Accordingly, the results of this study may indicate feelings of discomfort regarding the decline of society in the European Union due to disruptions to healthcare access and contraction of national economies caused by the COVID-19 pandemic. Because macroeconomic conditions influence the development of economic perceptions (Anderson, 2020), the results of the study mirror the economic and healthcare disruption caused by the pandemic and confirm the literature.

    This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

    All author declares no conflicts of interest in this paper.



    [1] Zhang J, Li X, Xu D, et al. (2019) Recent progress in the simulation of microstructure evolution in titanium alloys. Prog Nat Sci 29: 295–304. doi: 10.1016/j.pnsc.2019.05.006
    [2] Kaur M, Singh K (2019) Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mat Sci Eng C-Bio S 102: 844–862. doi: 10.1016/j.msec.2019.04.064
    [3] Koizumi H, Takeuchi Y, Imai H, et al. (2019) Application of titanium and titanium alloys to fixed dental prostheses. J Prosthodont Res 63: 266–270. doi: 10.1016/j.jpor.2019.04.011
    [4] Huang Y, Wang J, Wan L, et al. (2016) Self-riveting friction stir lap welding of aluminum alloy to steel. Mater Lett 185: 181–184. doi: 10.1016/j.matlet.2016.08.102
    [5] Zhang J, Song B, Wei Q, et al. (2019) A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends. J Mater Sci Technol 35: 270–284. doi: 10.1016/j.jmst.2018.09.004
    [6] Choudhury B, Chandrasekaran M (2017) Investigation on welding characteristics of aerospace materials—A review. Mater Today Proc 4: 7519–7526. doi: 10.1016/j.matpr.2017.07.083
    [7] Ebrahimi M, Par MA (2019) Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys. J Alloy Compd 781: 1074–1090. doi: 10.1016/j.jallcom.2018.12.083
    [8] Soffa WA, Laughlin DE (2004) High-strength age hardening copper-titanium alloys: redivivus. Prog Mater Sci 49: 347–366. doi: 10.1016/S0079-6425(03)00029-X
    [9] Alaneme KK, Okotete EA (2016) Reconciling viability and cost-effective shape memory alloy options—A review of copper and iron based shape memory metallic systems. Eng Sci Technol Int J 19: 1582–1592.
    [10] Dundu M (2018) Evolution of stress–strain models of stainless steel in structural engineering applications. Constr Build Mater 165: 413–423. doi: 10.1016/j.conbuildmat.2018.01.008
    [11] Gardner L (2019) Stability and design of stainless steel structures—Review and outlook. Thin-Walled Struct 141: 208–216. doi: 10.1016/j.tws.2019.04.019
    [12] Corradi M, Di Schino A, Borri A, et al. (2018) A review of the use of stainless steel for masonry repair and reinforcement. Constr Build Mater 181: 335–346. doi: 10.1016/j.conbuildmat.2018.06.034
    [13] Anderson DL (1989) Theory of the Earth, Boston: Blackwell Scientific Publications.
    [14] Revie RW (2011) Uhlig's Corrosion Handbook, 4 Eds., New Jersey: John Wiley & Sons.
    [15] Boyer RR (1996) An overview on the use of titanium in the aerospace industry. Mat Sci Eng A-Struct 213: 103–114. doi: 10.1016/0921-5093(96)10233-1
    [16] Jaffee RI, Promisel NE (1970) Science, Technology and Application of Titanium. Proceedings of an International Conference Held at London, 1 Ed., United Kingdom: Elsevier.
    [17] Pitchi CS, Priyadarshini A, Sana G, et al. (2020) A review on alloy composition and synthesis of β-Titanium alloys for biomedical applications. Mater Today Proc 26: 3297–3304. doi: 10.1016/j.matpr.2020.02.468
    [18] Kumar AS, Rao TVH, Rao VVSK, et al. (2019) Optimizing pulsed current micro plasma arc welding parameters to maximize ultimate tensile strength of titanium (Ti–6Al–4V) alloy using Dragon fly algorithm. Mater Today Proc 27: 2086–2090. doi: 10.1016/j.matpr.2019.09.073
    [19] Xiong J, Li S, Gao F, et al. (2015) Microstructure and mechanical properties of Ti6321 alloy welded joint by GTAW. Mat Sci Eng A-Struct 640: 419–423. doi: 10.1016/j.msea.2015.06.022
    [20] Baeslack WA, Becker DW, Froes FH (1984) Advances in titanium alloy welding metallurgy. JOM 36: 46–58. doi: 10.1007/BF03338455
    [21] Dhinakaran V, Shriragav SV, Fathima AFY, et al. (2020) A review on the categorization of the welding process of pure titanium and its characterization. Mater Today Proc 27: 742–747. doi: 10.1016/j.matpr.2019.12.034
    [22] Heinz A, Haszler A, Keidel C, et al. (2000) Recent development in aluminium alloys for aerospace applications. Mat Sci Eng A-Struct 280: 102–107. doi: 10.1016/S0921-5093(99)00674-7
    [23] Mohammadi J, Behnamian Y, Mostafaei A, et al. (2015) Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations. Mater Charact 101: 189–207. doi: 10.1016/j.matchar.2015.01.008
    [24] Vasanthakumar P, Sekar K, Venkatesh K (2019) Recent developments in powder metallurgy based aluminium alloy composite for aerospace applications. Mater Today Proc 18: 5400–5409. doi: 10.1016/j.matpr.2019.07.568
    [25] Jian Z, Zhong-yu P, Shi-ying L, et al. (2019) Investigation of wear behavior of graphite coating on aluminum piston skirt of automobile engine. Eng Fail Anal 97: 408–415. doi: 10.1016/j.engfailanal.2019.01.012
    [26] Gupta S, Singh D, Yadav A, et al. (2020) A comparative study of 5083 aluminium alloy and 316L stainless steel for shipbuilding material. Mater Today Proc 28: 2358–2363. doi: 10.1016/j.matpr.2020.04.641
    [27] Cagan SC, Venkatesh B, Buldum BB (2020) Investigation of surface roughness and chip morphology of aluminum alloy in dry and minimum quantity lubrication machining. Mater Today Proc 27: 1122–1126. doi: 10.1016/j.matpr.2020.01.547
    [28] Kim D, Lee W, Kim J, et al. (2010) Formability evaluation of friction stir welded 6111-T4 sheet with respect to joining material direction. Int J Mech Sci 52: 612–625. doi: 10.1016/j.ijmecsci.2010.01.001
    [29] Davis JR (1994) Stainless steels, Asm Specialty Handbook, 1 Ed., Almere: ASM international.
    [30] Hyun PJ, Kwon HS (2008) Development of high Mn–N duplex stainless steel for automobile structural components. Corros Sci 50: 404–410. doi: 10.1016/j.corsci.2007.07.004
    [31] Baddoo NR (2008) Stainless steel in construction: A review of research, applications, challenges and opportunities. J Constr Steel Res 64: 1199–1206. doi: 10.1016/j.jcsr.2008.07.011
    [32] Mohan S, Nair SS, Ajay AV, et al. (2019) Corrosion behaviour of ZrO2–TiO2nano composite coating on stainless steel under simulated marine environment. Mater Today Proc 27: 2492–2497. doi: 10.1016/j.matpr.2019.09.224
    [33] Nguyen Q, Azadkhou A, Akbari M, et al. (2020) Experimental investigation of temperature field and fusion zone microstructure in dissimilar pulsed laser welding of austenitic stainless steel and copper. J Manuf Process 56: 206–215. doi: 10.1016/j.jmapro.2020.03.037
    [34] Patel V, Sali A, Hyder J, et al. (2020) Electron beam welding of inconel 718. Procedia Manuf 48: 428–435. doi: 10.1016/j.promfg.2020.05.065
    [35] Niesłony P, Grzesik W, Jarosz K, et al. (2018) FEM-based optimization of machining operations of aerospace parts made of Inconel 718 superalloy. Procedia CIRP 77: 570–573. doi: 10.1016/j.procir.2018.08.220
    [36] Akca E, Gürsel A (2015) A review on superalloysand IN718 nickel-based INCONEL superalloy. Period Eng Nat Sci 3: 15–27.
    [37] Rahman MS, Polychronopoulou K, Polycarpou AA (2019) Tribochemistry of inconel 617 during sliding contact at 950 º С under helium environment for nuclear reactors. J Nucl Mater 521: 21–30. doi: 10.1016/j.jnucmat.2019.04.032
    [38] Periane S, Duchosal A, Vaudreuil S, et al. (2019) Machining influence on the fatigue resistance of Inconel 718 fabricated by Selective Laser Melting (SLM). Procedia StructIntegr 19: 415–422.
    [39] Ahmed MMZ, Seleman MME-S, Zidan ZA, et al. (2021) Microstructure and mechanical properties of dissimilar friction stir welded AA2024-T4/AA7075-T6 t–butt joints. Metals 11: 1–19.
    [40] Costa AMS, Oliveira JP, Pereira VF, et al. (2018) Ni-based Mar-M247 superalloy as a friction stir processing tool. J Mater Process Tech 262: 605–614. doi: 10.1016/j.jmatprotec.2018.07.034
    [41] Singh VP, Patel SK, Ranjan A, et al. (2020) Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: A critical review. J Mater Res Technol 9: 6217–6256. doi: 10.1016/j.jmrt.2020.01.008
    [42] Costa M, Rojas R, Mira-Aguiar T, et al. (2015) A comparative techno–economic evaluation of friction stir welding versus resistance seam welding, FSWP 2015 International Conference, 1–3.
    [43] Shah PH, Badheka VJ (2016) An experimental insight on the selection of the tool tilt angle for friction stir welding of 7075 T651 aluminum alloys. Indian J Sci Technol 9: 1–11. doi: 10.17485/ijst/2016/v9i47/105273
    [44] Malopheyev S, Vysotskiy I, Kulitskiy V, et al. (2016) Optimization of processing-microstructure-properties relationship in friction-stir welded 6061-T6 aluminum alloy. Mat Sci Eng A-Struct 662: 136–143. doi: 10.1016/j.msea.2016.03.063
    [45] Sun SJ, Kim JS, Lee WG, et al. (2017) Influence of friction stir welding on mechanical properties of butt joints of AZ61 magnesium alloy. Adv Mater Sci Eng 2017: 1–13.
    [46] Sato YS, Arkom P, Kokawa H, et al. (2008) Effect of microstructure on properties of friction stir welded Inconel Alloy 600. Mat Sci Eng A-Struct 477: 250–258. doi: 10.1016/j.msea.2007.07.002
    [47] Song KH, Nakata K (2010) Effect of precipitation on post-heat-treated Inconel 625 alloy after friction stir welding. Mater Des 31: 2942–2947. doi: 10.1016/j.matdes.2009.12.020
    [48] Gamit D, Mishra RR, Sharma AK (2017) Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterization. J Manuf Process 27: 158–168.
    [49] Sharma A, Sehgal S, Goyal D (2020) Effects of process parameters in joining of Inconel-625 alloy through microwave hybrid heating. Mater Today Proc 28: 1323–1327. doi: 10.1016/j.matpr.2020.04.590
    [50] Bagha L, Sehgal S, Thakur A, et al. (2017) Effects of powder size of interface material on selective hybrid carbon microwave joining of SS304–SS304. J Manuf Process 25: 290–295. doi: 10.1016/j.jmapro.2016.12.013
    [51] Badiger RI, Narendranath S, Srinath MS (2018) Optimization of parameters influencing tensile strength of inconel-625 welded joints developed through microwave hybrid heating. Mater Today Proc 5: 7659–7667. doi: 10.1016/j.matpr.2017.11.441
    [52] Pal M, Sehgal S, Kumar H (2020) Optimization of elemental weight % in microwave processed joints of SS304/SS316 using Taguchi philosophy. J Adv Manuf Syst 19: 543–565. doi: 10.1142/S0219686720500262
    [53] Samyal R, Bagha AK, Bedi R (2019) An experimental study to predict the exposure time for microwave based joining of different grades of stainless steel material. Mater Today Proc 27: 2449–2454. doi: 10.1016/j.matpr.2019.09.217
    [54] Kumar V, Sehgal S (2020) Joining of duplex stainless steel through selective microwave hybrid heating technique without using filler material. Mater Today Proc28: 1314–1318. doi: 10.1016/j.matpr.2020.04.509
    [55] Gupta P, Kumar S, Kumar A (2013) Study of joint formed by tungsten carbide bearing alloy through microwave welding. Mater Manuf Process 28: 601–604. doi: 10.1080/10426914.2013.763966
    [56] Singh S, Suri NM, Belokar RM (2015) Characterization of joint developed by fusion of aluminum metal powder through microwave hybrid heating. Mater Today Proc 2: 1340–1346. doi: 10.1016/j.matpr.2015.07.052
    [57] Richards NL, Nakkalil R, Chaturvedi MC (1994) The influence of electron-beam welding parameters on heat-affected-zone microfissuring in INCOLOY 903. Metall Mater Trans A 25: 1733–1745. doi: 10.1007/BF02668538
    [58] Zhang BG, Zhao J, Li XP, et al. (2014) Electron beam welding of 304 stainless steel to QCr0.8 copper alloy with copper filler wire. Trans Nonferrous Met Soc China 24: 4059–4066.
    [59] Derakhshi MA, Kangazian J, Shamanian M (2019) Electron beam welding of inconel 617 to AISI 310: Corrosion behavior of weld metal. Vacuum 161: 371–374. doi: 10.1016/j.vacuum.2019.01.005
    [60] Iltaf A, Junaid M, khan FN, et al. (2020) Microstructure, mechanical properties, residual stresses and texture analysis of Ti–5Al–2.5Sn alloy weldments obtained using electron beam of different oscillation patterns. P I Mech Eng C-J Mec234: 3484–3496.
    [61] Dinda SK, BasiruddinSk M, Roy GG, et al. (2016) Microstructure and mechanical properties of electron beam welded dissimilar steel to Fe–Al alloy joints. Mat Sci Eng A-Struct 677: 182–192. doi: 10.1016/j.msea.2016.09.050
    [62] Guo S, Peng Y, Cui C, et al. (2019) Forming and tensile fracture characteristics of Ti–6Al–4V and T2 Cu vacuum electron beam welded joints. Vacuum 165: 311–319. doi: 10.1016/j.vacuum.2019.04.018
    [63] Singh J, Shahi AS (2019) Metallurgical, impact and fatigue performance of electron beam welded duplex stainless steel joints. J Mater Process Tech 272: 137–148. doi: 10.1016/j.jmatprotec.2019.05.010
    [64] Gao P, Zhang KF, Zhang BG, et al. (2011) Microstructures and high temperature mechanical properties of electron beam welded Inconel 718 superalloy thick plate. Trans Nonferrous Met Soc China 21: s315–s322. doi: 10.1016/S1003-6326(11)61598-7
    [65] Sharma SK, Agarwal P, Majumdar JD (2017) Studies on electron beam welded Inconel 718 similar joints. Procedia Manuf 7: 654–659. doi: 10.1016/j.promfg.2016.12.097
    [66] Zhao L, Wang S, Jin Y, et al. (2018) Microstructural characterization and mechanical performance of Al–Cu–Li alloy electron beam welded joint. Aerosp Sci Technol 82: 61–69. doi: 10.1016/j.ast.2018.08.030
    [67] Oliveira JP, Zeng Z, Omori T, et al. (2016) Improvement of damping properties in laser processed superelastic Cu–Al–Mn shape memory alloys. Mater Design 98: 280–284. doi: 10.1016/j.matdes.2016.03.032
    [68] Oliveira JP, Schell N, Zhou N, et al. (2019) Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties. Mater Design 162: 229–234. doi: 10.1016/j.matdes.2018.11.053
    [69] Zeng Z, Oliveira JP, Yang M, et al. (2017) Functional fatigue behavior of NiTi–Cu dissimilar laser welds. Mater Design 114: 282–287. doi: 10.1016/j.matdes.2016.11.023
    [70] Noh FS, Zin HM, Alnasser K, et al. (2017) Optimization of laser lap joining between stainless steel 304 and Acrylonitrile Butadiene Styrene (ABS). Procedia Eng 184: 246–250. doi: 10.1016/j.proeng.2017.04.092
    [71] Bideskan AS, Ebrahimzadeh P, Teimouri R (2020) Fabrication of bi-layer PMMA and aluminum 6061-T6 laminates by laser transmission welding: Performance prediction and optimization. Int J Lightweight Mater Manuf 3: 150–159.
    [72] Liu FC, Dong P, Pei X (2020) A high-speed metal-to-polymer direct joining technique and underlying bonding mechanisms. J Mater Process Tech 280: 116610. doi: 10.1016/j.jmatprotec.2020.116610
    [73] Hao K, Liao W, Zhang T, et al. (2020) Interface formation and bonding mechanisms of laser transmission welded composite structure of PET on austenitic steel via beam oscillation. Compos Struct 235: 111752. doi: 10.1016/j.compstruct.2019.111752
    [74] Li S, Mi G, Wang C (2020) A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties. J Manuf Process 53: 12–20. doi: 10.1016/j.jmapro.2020.01.018
    [75] Mehrpouya M, Gisario A, Elahinia M (2018) Laser welding of NiTi shape memory alloy: A review. J Manuf Process 31: 162–186. doi: 10.1016/j.jmapro.2017.11.011
    [76] Katayama S, Kawahito Y (2008) Laser direct joining of metal and plastic. Scripta Mater 59: 1247–1250. doi: 10.1016/j.scriptamat.2008.08.026
    [77] Zhang LX, Chang Q, Sun Z, et al. (2019) Diffusion bonding of hydrogenated TC4 alloy and GH3128 superalloy using composite interlayers. J Mater Process Tech 274: 116266. doi: 10.1016/j.jmatprotec.2019.116266
    [78] Zhu F, Peng H, Li X, et al. (2018) Dissimilar diffusion bonding behavior of hydrogenated Ti2AlNb-based and Ti–6Al–4V alloys. Mater Des 159: 68–78. doi: 10.1016/j.matdes.2018.08.034
    [79] Wang Z, Li C, Qi J, et al. (2019) Characterization of hydrogenated niobium interlayer and its application in TiAl/Ti2AlNb diffusion bonding. Int J Hydrogen Energ 44: 6929–6937. doi: 10.1016/j.ijhydene.2019.01.133
    [80] Feng JC, Liu H, He P, et al. (2007) Effects of hydrogen on diffusion bonding of hydrogenated Ti6Al4V alloy containing 0.3 wt% hydrogen at fast heating rate. Int J Hydrogen Energ 32: 3054–3058.
    [81] Wu H, Peng H, Li X, et al. (2019) Effect of hydrogen addition on diffusion bonding behavior of Ti-55 alloy. Mat Sci Eng A-Struct 739: 244–253. doi: 10.1016/j.msea.2018.10.032
    [82] He P, Wang J, Lin T, et al. (2014) Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using hydrogenated Ti6Al4V interlayer. Int J Hydrogen Energ 39: 1882–1887. doi: 10.1016/j.ijhydene.2013.11.035
    [83] Shanthala K, Sreenivasa TN (2017) Non-conventional solid state joining of structural materials. Int J Res Eng Technol 6: 46–48.
    [84] He P, Fan L, Liu H, et al. (2010) Effects of hydrogen on diffusion bonding of TiAl-based intermetallics using hydrogenated Ti6Al4V interlayer. Int J Hydrogen Energ 35: 13317–13321. doi: 10.1016/j.ijhydene.2010.09.040
    [85] Wang D, Cao J, Li W, et al. (2017) Zr hydrogenation by cathodic charging and its application in TC4 alloy diffusion bonding. Int J Hydrogen Energ 42: 6350–6359. doi: 10.1016/j.ijhydene.2016.11.170
    [86] Kore SD, Date PP, Kulkarni SV (2007) Effect of process parameters on electromagnetic impact welding of aluminum sheets. Int J Impact Eng 34: 1327–1341. doi: 10.1016/j.ijimpeng.2006.08.006
    [87] Pereira D, Oliveira JP, Pardal T, et al. (2018) Magnetic pulse welding: machine optimisation for aluminium tubular joints production. Sci Technol Weld Joi 23: 172–179. doi: 10.1080/13621718.2017.1355425
    [88] Pereira D, Oliveira JP, Santos TG, et al. (2019) Aluminium to carbon fibre reinforced polymer tubes joints produced by magnetic pulse welding. Compos Struct 230: 111512. doi: 10.1016/j.compstruct.2019.111512
    [89] Wang YT, Cheng YH, Lin CC, et al. (2020) Direct bonding of aluminum to alumina using a nickel interlayer for power electronics applications. Results Mater 6: 100093. doi: 10.1016/j.rinma.2020.100093
    [90] Chen S, Jiang X (2015) Microstructure evolution during magnetic pulse welding of dissimilar aluminium and magnesium alloys. J Manuf Process 19: 14–21. doi: 10.1016/j.jmapro.2015.04.001
    [91] Xu Z, Cui J, Yu H, et al. (2013) Research on the impact velocity of magnetic impulse welding of pipe fitting. Mater Des 49: 736–745. doi: 10.1016/j.matdes.2012.12.059
    [92] Raoelison RN, Buiron N, Rachik M, et al. (2012) Efficient welding conditions in magnetic pulse welding process. J Manuf Process 14: 372–377. doi: 10.1016/j.jmapro.2012.04.001
    [93] Lueg-Althoff J, Bellmann J, Hahn M, et al. (2020) Joining dissimilar thin-walled tubes by Magnetic Pulse Welding. J Mater Process Tech 279: 116562. doi: 10.1016/j.jmatprotec.2019.116562
    [94] Watanabe M, Kumai S, Hagimoto G, et al. (2009) Interfacial microstructure of aluminum/metallic glass lap joints fabricated by magnetic pulse welding. Mater Trans 50: 1279–1285. doi: 10.2320/matertrans.ME200835
    [95] Zhang W, Ao S, Oliveira JP, et al. (2018) Microstructural characterization and mechanical behavior ofNiTishape memory alloys ultrasonic joints using Cu interlayer. Materials 11: 1–14.
    [96] Zhang W, Ao S, Oliveira JP, et al. (2020) On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a Cu interlayer. Scripta Mater 178: 414–417. doi: 10.1016/j.scriptamat.2019.12.012
    [97] Zhang W, Ao SS, Oliveira JP, et al. (2018) Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys. Smart Mater Struct 27: 85020. doi: 10.1088/1361-665X/aacfeb
    [98] Neppiras EA (1965) Ultrasonic welding of metals. Ultrasonics 3: 128–135. doi: 10.1016/S0041-624X(65)80003-8
    [99] Jeng YR, Horng JH (2001) Amicrocontact approach for ultrasonic wire bonding in microelectronics. J Tribol 123: 725–731. doi: 10.1115/1.1352744
    [100] Li H, Cao B (2019) Effects of welding pressure on high-power ultrasonic spot welding of Cu/Al dissimilar metals. J Manuf Process 46: 194–203. doi: 10.1016/j.jmapro.2019.07.018
    [101] Pati PR, Satpathy MP, Nanda BK, et al. (2020) Dissimilar joining of Al/SS sheets with interlayers by ultrasonic spot Welding: Microstructure and mechanical properties. Mater Today Proc 26: 1757–1760. doi: 10.1016/j.matpr.2020.02.369
    [102] Zhou L, Min J, He WX, et al. (2018) Effect of welding time on microstructure and mechanical properties of Al–Ti ultrasonic spot welds. J Manuf Process 33: 64–73. doi: 10.1016/j.jmapro.2018.04.013
    [103] Tsujino J, Sano T, Ogata H, et al. (2002) Complex vibration ultrasonic welding systems with large area welding tips. Ultrasonics 40: 361–364. doi: 10.1016/S0041-624X(02)00122-1
    [104] Krüger S, Wagner G, Eifler D (2004) Ultrasonic welding of metal/composite joints. Adv Eng Mater 6: 157–159. doi: 10.1002/adem.200300539
    [105] Thomas M, Nicholas ED, Needham JC, et al. (1991) Improvements relating to friction welding. PL Patent 615480 B1.
    [106] Hou W, Ahmad Shah LH, Huang G, et al. (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. J Alloy Compd 825: 154045. doi: 10.1016/j.jallcom.2020.154045
    [107] Hasan MM, Ishak M, Rejab MRM (2017) Influence of machine variables and tool profile on the tensile strength of dissimilar AA7075–AA6061 friction stir welds. Int J Adv Manuf Tech 90: 2605–2615. doi: 10.1007/s00170-016-9583-3
    [108] Aali M (2020) Investigation of spindle rotation rate effects on the mechanical behavior of friction stir welded Ti4Al2V alloy. J Weld Join 38: 81–91. doi: 10.5781/JWJ.2020.38.1.9
    [109] Li D, Yang X, Cui L, et al. (2015) Fatigue property of stationary shoulder friction stir welded additive and non-additive T joints. Sci Technol Weld Join 20: 650–654. doi: 10.1179/1362171815Y.0000000045
    [110] Bagha L, Shegal S, Thakur A (2016) Comparative analysis of microwave based joining/welding of SS304–SS304 using different interfacing materials. MATEC Web Conf 57: 03001. doi: 10.1051/matecconf/20165703001
    [111] Pal M, Sehgal S, Kumar H, et al. (2020) Use of nickel filler powder in joining SS304–SS316 through microwave hybrid heating technique. Met Powder Rep In press.
    [112] Bagha L, Sehgal S, Thakur A, et al. (2019) Low cost joining of SS304–SS304 through microwave hybrid heating without filler-powder. Mater Res Express 1: 25035.
    [113] Srinath M, Murthy P, Sharma A, et al. (2012) Simulation and analysis of microwave heating while joining bulk copper. Int J Eng Sci Technol 4: 152–158.
    [114] Bhoi NK, Singh H, Pratap S (2019) A study on microwave susceptor material for hybrid heating. J Phys Conf Ser 1240: 012097 doi: 10.1088/1742-6596/1240/1/012097
    [115] Lingappa SM, Srinath MS, Amarendra HJ (2017) An experimental investigation to find the critical (coupling) temperature in microwave hybrid heating of bulk metallic materials. Mater Res Express 4: 106521. doi: 10.1088/2053-1591/aa931e
    [116] Norrish J (2006) Advanced Welding Processes, Cambridge: Woodhead Publishing.
    [117] Cary HB, Helzer SC (2004) Modern Welding Technology, 5Eds., New Jersey: Prentice Hall.
    [118] Oliveira JP, Duarte JF, Inácio P, et al. (2017) Production of Al/NiTi composites by friction stir welding assisted by electrical current. Mater Design 113: 311–318. doi: 10.1016/j.matdes.2016.10.038
    [119] Al-Sayyad A, Bardon J, Hirchenhahn P, et al. (2018) Aluminum pretreatment by a laser ablation process: Influence of processing parameters on the joint strength of laser welded aluminum–polyamide assemblies. Procedia CIRP 74: 495–499. doi: 10.1016/j.procir.2018.08.136
    [120] Amend P, Pfindel S, Schmidt M (2013) Thermal joining of thermoplastic metal hybrids by means of mono- and polychromatic radiation. Phys Procedia 41: 98–105. doi: 10.1016/j.phpro.2013.03.056
    [121] Chen YJ, Yue TM, Guo ZN (2016) A new laser joining technology for direct-bonding of metals and plastics. Mater Des 110: 775–781. doi: 10.1016/j.matdes.2016.08.018
    [122] Xiao R, Zhang X (2014) Problems and issues in laser beam welding of aluminum–lithium alloys. J Manuf Process 16: 166–175. doi: 10.1016/j.jmapro.2013.10.005
    [123] Elrefaey A, Tillmann W (2009) Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer. J Mater Process Tech 209: 2746–2752. doi: 10.1016/j.jmatprotec.2008.06.014
    [124] Ma Y, Li H, Yang L, et al. (2018) Reaction-assisted diffusion bonding of Ti6Al4V alloys with Ti/Ni nanostructured multilayers. J Mater Process Tech 262: 204–209. doi: 10.1016/j.jmatprotec.2018.05.035
    [125] Deng Y, Sheng G, Xu C (2013) Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer. Mater Des 46: 84–87. doi: 10.1016/j.matdes.2012.09.058
    [126] Sadiku MNO (2001) Elements of Electromagnetics, 6 Eds., New York: Oxford University Press.
    [127] Jiang S, Shen J, Nagasaka T, et al. (2020) Interfacial characterization of dissimilar-metals bonding between vanadium alloy and Hastelloy X alloy by explosive welding. J Nucl Mater 539: 152322. doi: 10.1016/j.jnucmat.2020.152322
    [128] Wang PQ, Chen DL, Ran Y, et al. (2020) Electromagnetic pulse welding of Al/Cu dissimilar materials: Microstructure and tensile properties. Mat Sci Eng A-Struct 792: 139842. doi: 10.1016/j.msea.2020.139842
    [129] Li C, Zhou Y, Wang X, et al. (2020) Influence of discharge current frequency on electromagnetic pulse welding. J Manuf Process 57: 509–518. doi: 10.1016/j.jmapro.2020.06.038
    [130] Raoelison RN, Racine D, Zhang Z, et al. (2014) Magnetic pulse welding: Interface of Al/Cu joint and investigation of intermetallic formation effect on the weld features. J Manuf Process 16: 427–434. doi: 10.1016/j.jmapro.2014.05.002
    [131] Yu HP, Xu ZD, Jiang HW, et al. (2012) Magnetic pulse joining of aluminum alloy–carbon steel tubes. Trans Nonferrous Met Soc China 22: s548–s552.
    [132] Shah U, Liu X (2020) Effect of ultrasonic energy on the spot weldability of aluminum alloy AA6061. Mater Des 192: 108690. doi: 10.1016/j.matdes.2020.108690
    [133] Bahl S, Bagha AK (2020) Finite element modeling and simulation of the fiber–matrix interface in fiber reinforced metal matrix composites. Mater Today Proc In press.
    [134] Bagha AK, Bahl S (2020) Finite element analysis of VGCF/pp reinforced square representative volume element to predict its mechanical properties for different loadings. Mater Today Proc In press.
    [135] Bahl S (2020) Axisymmetric finite element analysis of single fiber push-out test for stainless steel wire reinforced aluminum matrix composites. Mater Today Proc 28: 1605–1611. doi: 10.1016/j.matpr.2020.04.848
    [136] Bahl S (2020) Fiber reinforced metal matrix composites—a review. Mater Today Proc In press.
    [137] Saini MK, Bagha AK, Kumar S, et al. (2020) Finite element analysis for predicting the vibration characteristics of natural fiber reinforced epoxy composites. Mater Today Proc In press.
    [138] Bagha AK, Bahl S (2020) Strain energy and finite element analysis to predict the mechanical properties of vapor grown carbon fiber reinforced polypropylene nanocomposites. Mater Today Proc In press.
    [139] Shah UH, Liu X (2019) Ultrasonic resistance welding of TRIP-780 steel. J Mater Process Tech 274: 116287. doi: 10.1016/j.jmatprotec.2019.116287
    [140] Tsujino J, Hidai K, Hasegawa A, et al. (2002) Ultrasonic butt welding of aluminum, aluminum alloy and stainless steel plate specimens. Ultrasonics 40: 371–374. doi: 10.1016/S0041-624X(02)00124-5
    [141] Wang SQ, Patel VK, Bhole SD, et al. (2015) Microstructure and mechanical properties of ultrasonic spot welded Al/Ti alloy joints. Mater Des 78: 33–41. doi: 10.1016/j.matdes.2015.04.023
    [142] Kalyan RK, Omkumar M (2020) Investigation and characterization of ultrasonically welded GF/PA6T composites. Mater Today Proc 26: 282–286. doi: 10.1016/j.matpr.2019.11.261
  • This article has been cited by:

    1. Juan Zhou, Xiong Li, Yuanting Ma, Zejiu Wu, Ziruo Xie, Yuqi Zhang, Yiming Wei, Optimal modeling of anti-breast cancer candidate drugs screening based on multi-model ensemble learning with imbalanced data, 2023, 20, 1551-0018, 5117, 10.3934/mbe.2023237
    2. Laura Grassini, Statistical features and economic impact of Covid-19, 2023, 5, 2689-3010, 38, 10.3934/NAR.2023003
    3. Xiangtao Chen, Yuting Bai, Peng Wang, Jiawei Luo, Data augmentation based semi-supervised method to improve COVID-19 CT classification, 2023, 20, 1551-0018, 6838, 10.3934/mbe.2023294
    4. Yangyan Zeng, Yidong Zhou, Wenzhi Cao, Dongbin Hu, Yueping Luo, Haiting Pan, Big data analysis of water quality monitoring results from the Xiang River and an impact analysis of pollution management policies, 2023, 20, 1551-0018, 9443, 10.3934/mbe.2023415
    5. Zejun Li, Yuxiang Zhang, Yuting Bai, Xiaohui Xie, Lijun Zeng, IMC-MDA: Prediction of miRNA-disease association based on induction matrix completion, 2023, 20, 1551-0018, 10659, 10.3934/mbe.2023471
  • Reader Comments
  • © 2021 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6098) PDF downloads(592) Cited by(29)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog