Review Topical Sections

Phase relations of NASICON materials and compilation of the quaternary phase diagram Na2O-P2O5-SiO2-ZrO2

  • Received: 19 October 2017 Accepted: 28 November 2017 Published: 08 December 2017
  • A short overview is given on existing phase relations in the four related ternary diagrams, setting the frame for a quaternary phase diagram. On the basis of published data the three-dimensional phase region of NASICON materials is constructed and phase relations to ternary and binary systems as well as to single oxides are presented. To date, the NASICON region can be described as a compressed tetrahedron within the tetrahedral phase diagram. However, the three-dimensional presentation clearly elucidates that few reported compositions exist outside this compressed tetrahedron indicating that the phase region of NASICON materials may be larger than the solid solutions known so far. The three-dimensional representation also better elucidates the regions connecting the edges of the NASICON tetrahedron with ternary and binary compounds as well as single oxides, i.e., ZrO2 and ZrSiO4, Na3PO4, sodium silicates and sodium zirconium silicates and gives a better understanding of phase formations during the processing of the ceramics. The implications of the formation of secondary phases and glass-ceramic composites are discussed in terms of technological applications.

    Citation: Frank Tietz. Phase relations of NASICON materials and compilation of the quaternary phase diagram Na2O-P2O5-SiO2-ZrO2[J]. AIMS Materials Science, 2017, 4(6): 1305-1318. doi: 10.3934/matersci.2017.6.1305

    Related Papers:

    [1] Yunpeng Bai, Yuanlin Li, Jiangtao Peng . Unit groups of finite group algebras of Abelian groups of order 17 to 20. AIMS Mathematics, 2021, 6(7): 7305-7317. doi: 10.3934/math.2021428
    [2] Lilan Dai, Yunnan Li . Primitive decompositions of idempotents of the group algebras of dihedral groups and generalized quaternion groups. AIMS Mathematics, 2024, 9(10): 28150-28169. doi: 10.3934/math.20241365
    [3] Ted Hurley . Ultimate linear block and convolutional codes. AIMS Mathematics, 2025, 10(4): 8398-8421. doi: 10.3934/math.2025387
    [4] Doris Dumičić Danilović, Andrea Švob . On Hadamard 2-(51,25,12) and 2-(59,29,14) designs. AIMS Mathematics, 2024, 9(8): 23047-23059. doi: 10.3934/math.20241120
    [5] Jiangmin Pan, Yingnan Zhang . On cubic semisymmetric bi-Cayley graphs on nonabelian simple groups. AIMS Mathematics, 2022, 7(7): 12689-12701. doi: 10.3934/math.2022702
    [6] Menderes Gashi . On the symmetric block design with parameters (280,63,14) admitting a Frobenius group of order 93. AIMS Mathematics, 2019, 4(4): 1258-1273. doi: 10.3934/math.2019.4.1258
    [7] Hailin Liu, Longzhi Lu, Liping Zhong . On the proportion of elements of order a product of two primes in finite symmetric groups. AIMS Mathematics, 2024, 9(9): 24394-24400. doi: 10.3934/math.20241188
    [8] Madeleine Al Tahan, Sarka Hoskova-Mayerova, B. Davvaz, A. Sonea . On subpolygroup commutativity degree of finite polygroups. AIMS Mathematics, 2023, 8(10): 23786-23799. doi: 10.3934/math.20231211
    [9] Yongli Zhang, Jiaxin Shen . Flag-transitive non-symmetric 2-designs with λ prime and exceptional groups of Lie type. AIMS Mathematics, 2024, 9(9): 25636-25645. doi: 10.3934/math.20241252
    [10] Hui Yan, Hongxing Wang, Kezheng Zuo, Yang Chen . Further characterizations of the weak group inverse of matrices and the weak group matrix. AIMS Mathematics, 2021, 6(9): 9322-9341. doi: 10.3934/math.2021542
  • A short overview is given on existing phase relations in the four related ternary diagrams, setting the frame for a quaternary phase diagram. On the basis of published data the three-dimensional phase region of NASICON materials is constructed and phase relations to ternary and binary systems as well as to single oxides are presented. To date, the NASICON region can be described as a compressed tetrahedron within the tetrahedral phase diagram. However, the three-dimensional presentation clearly elucidates that few reported compositions exist outside this compressed tetrahedron indicating that the phase region of NASICON materials may be larger than the solid solutions known so far. The three-dimensional representation also better elucidates the regions connecting the edges of the NASICON tetrahedron with ternary and binary compounds as well as single oxides, i.e., ZrO2 and ZrSiO4, Na3PO4, sodium silicates and sodium zirconium silicates and gives a better understanding of phase formations during the processing of the ceramics. The implications of the formation of secondary phases and glass-ceramic composites are discussed in terms of technological applications.


    The class of normalized analytic functions in the open unit disc Δ={zC:|z|<1} denoted by Ω consists of the functions f of the form

    f(z)=z+n=2anzn, (1.1)

    where f(0)1=f(0)=0. Let (z)Ω defined by

    (z)=z+n=2bnzn. (1.2)

    Then the Hadamard product, also known as the convolution of two function f(z) and (z) denoted by f is defined as

    (f)(z)=f(z)(z)=z+n=2anbnzn,zΔ.

    Moreover, f(z)(z), if there exist a Schwartz function χ(z) in A, satisfying the conditions χ(0)=0 and |χ(z)|<1, such that f(z)=(χ(z)). The symbol is used to denote subordination.

    Let S denote the subclass of Ω of univalent functions in Δ. Let P,C,S and K represent the subclasses of S known as the classes of Caratheodory functions, convex funtions, starlike functions, and close-to-convex functions, respectively.

    The concept of bounded rotations was introduced by Brannan in [7]. A lot of quality work on the generalization of this concept has already been done. Working in the same manner, we have defined the following new classes.

    Definition 1.1. Let

    ν(z)=1+n=1pnzn (1.3)

    be analytic in Δ such that ν(0)=1. Then for m2, ν(z)Pm((z)), if and only if

    ν(z)=(m4+12)ν1(z)(m412)ν2(z), (1.4)

    where (z) is a convex univalent function in Δ and νi(z)(z) for i=1,2.

    Particularly, for m=2, we get the class P((z)).

    Definition 1.2. Let f(z) and (z) be two analytic functions as defined in (1.1) and (1.2) such that (f)(z)0. Let (z) be a convex univalent function. Then for m2, fVm[(z);(z)] if and only if

    (z(f))(f)Pm((z)),zΔ. (1.5)

    Particularly, for m=2, we will get the class C[(z);(z)]. So, a function fC[(z);(z)] if and only if

    (z(f))(f)(z),zΔ.

    Definition 1.3. Let f(z) and (z) be the functions defined in (1.1) and (1.2), then f(z)Rm[(z);(z)] if and only if

    z(f)(f)Pm((z)),zΔ. (1.6)

    Particularly, for m=2, we get the class SΛ[(z);(z)], i.e., fSΛ[(z);(z)] if and only if

    z(f)(f)(z),zΔ.

    From (1.5) and (1.6) it can be easily noted that fVm[(z);(z)] if and only if zf(z)Rm[(z);(z)]. For m=2, this relation will hold for the classes C[(z);(z)] and SΛ[(z);(z)].

    Definition 1.4. Let f(z) and (z) be analytic function as defined in (1.1) and (1.2) and m2. Let (z) be the convex univalent function. Then, fTm[(z);(z)] if and only if there exists a function ψ(z)SΛ[(z);(z)] such that

    z(f)ψPm((z)),zΔ. (1.7)

    It is interesting to note that the particular cases of our newly defined classes will give us some well-known classes already discussed in the literature. Some of these special cases have been elaborated below.

    Special Cases: Let (z) be the identity function defined as z1z denoted by I i.e., f=fI=f. Then

    (1) For (z)=1+z1z we have Pm((z))=Pm,Rm[(z);(z)]=Rm introduced by Pinchuk [23] and the class Vm[(z);(z)]=Vm defined by Paatero [21]. For m=2, we will get the well-known classes of convex functions C and the starlike functions SΛ.

    (2) Taking (z)=1+(12δ)z1z, we get the classes Pm(δ),Rm(δ) and Vm(δ) presented in [22]. For m=2, we will get the classes C(δ) and SΛ(δ).

    (3) Letting (z)=1+Az1+Bz, with 1B<A1 introduced by Janowski in [12], the classes Pm[A,B],Rm[A,B] and Vm[A,B] defined by Noor [16,17] can be obtained. Moreover, the classes C[A,B] and SΛ[A,B] introduced by [12] can be derived by choosing m=2.

    A significant work has already been done by considering (z) to be different linear operators and (z) to be any convex univalent function. For the details see ([4,9,18,19,24]).

    The importance of Mittag-Leffler functions have tremendously been increased in the last four decades due to its vast applications in the field of science and technology. A number of geometric properties of Mittag-Leffler function have been discussed by many researchers working in the field of Geometric function theory. For some recent and detailed study on the Geometric properties of Mittag-Leffler functions see ([2,3,31]).

    Special function theory has a vital role in both pure and applied mathematics. Mittag-Leffler functions have massive contribution in the theory of special functions, they are used to investigate certain generalization problems. For details see [11,26]

    There are numerous applications of Mittag-Leffler functions in the analysis of the fractional generalization of the kinetic equation, fluid flow problems, electric networks, probability, and statistical distribution theory. The use of Mittag-Leffler functions in the fractional order integral equations and differential equations attracted many researchers. Due to its connection and applications in fractional calculus, the significance of Mittag-Leffler functions has been amplified. To get a look into the applications of Mittag-Leffler functions in the field of fractional calculus, (see [5,27,28,29,30]).

    Here, in this article we will use the operator Hγ,κλ,η:ΩΩ, introduced by Attiya [1], defined as

    Hγ,κλ,η(f)=μγ,κλ,ηf(z),zΔ, (1.8)

    where η,γC, (λ)>max{0,(k)1} and (k)>0. Also, (λ)=0 when (k)=1;η0. Here, μγ,κλ,η is the generalized Mittag-Leffler function, defined in [25]. The generalized Mittag-Leffler function has the following representation.

    μγ,κλ,η=z+n=2Γ(γ+nκ)Γ(λ+η)Γ(γ+κ)Γ(η+λn)n!zn.

    So, the operator defined in (1.8) can be rewritten as:

    Hγ,κλ,η(f)(z)=z+n=2Γ(γ+nκ)Γ(λ+η)Γ(γ+κ)Γ(η+λn)n!anzn,zΔ. (1.9)

    Attiya [1] presented the properties of the aforesaid operator as follows:

    z(Hγ,κλ,η(f(z)))=(γ+κκ)(Hγ+1,κλ,η(f(z)))(γκ)(Hγ,κλ,η(f(z))), (1.10)

    and

    z(Hγ,κλ,η+1(f(z)))=(λ+ηλ)(Hγ,κλ,η(f(z)))(ηλ)(Hγ,κλ,η+1(f(z))). (1.11)

    However, as essential as real-world phenomena are, discovering a solution for the commensurate scheme and acquiring fundamentals with reverence to design variables is challenging and time-consuming. Among the most pragmatically computed classes, we considered the new and novel class which is very useful for efficiently handling complex subordination problems. Here, we propose a suitably modified scheme in order to compute the Janowski type function of the form (z)=(1+Az1+Bz)β, where 0<β1 and 1B<A1, which is known as the strongly Janowski type function. Moreover, for (z), we will use the function defined in (1.9). So, the classes defined in Definition 1.1–1.4 will give us the following novel classes.

    Definition 1.5. A function ν(z) as defined in Eq (1.3) is said to be in the class P(m,β)[A,B] if and only if for m2 there exist two analytic functions ν1(z) and ν2(z) in Δ, such that

    ν(z)=(m4+12)ν1(z)(m412)ν2(z),

    where νi(z)(1+Az1+Bz)β for i=1,2. For m=2, we get the class of strongly Janowki type functions Pβ[A,B].

    Moreover,

    V(m,β)[A,B;γ,η]={fΩ:(z(Hγ,κλ,ηf(z)))(Hγ,κλ,ηf(z))P(m,β)[A,B]},
    R(m,β)[A,B;γ,η]={fΩ:z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z)P(m,β)[A,B]},
    Cβ[A,B,γ,η]={fΩ:(z(Hγ,κλ,ηf(z)))(Hγ,κλ,ηf(z))Pβ[A,B]},
    SΛβ[A,B,γ,η]={fΩ:z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z)Pβ[A,B]},
    T(m,β)[A,B;γ,η]={fΩ:z(Hγ,κλ,ηf(z))Hγ,κλ,ηψ(z)P(m,β)[A,B],whereψ(z)SΛβ[A,B,γ,η]},

    where η,γC, (λ)>max{0,(k)1} and (k)>0. Also, (λ)=0 when (k)=1;η0. It can easily be noted that there exists Alexander relation between the classes V(m,β)[A,B;γ,η] and R(m,β)[A,B;γ,η], i.e.,

    fV(m,β)[A,B;γ,η]zfR(m,β)[A,B;γ,η]. (1.12)

    Throughout this investigation, 1B<A1, m2 and 0<β1 unless otherwise stated.

    Lemma 2.1. ([13]) Let ν(z) as defined in (1.3) be in P(m,β)[A,B]. Then ν(z)Pm(ϱ), where 0ϱ=(1A1B)β<1.

    Lemma 2.2. ([8]) Let (z) be convex univalent in Δ with h(0)=1 and (ζ(z)+α)>0(ζC). Let p(z) be analytic in Δ with p(0)=1, which satisfy the following subordination relation

    p(z)+zp(z)ζp(z)+α(z),

    then

    p(z)(z).

    Lemma 2.3. ([10]) Let (z)P. Then for |z|<r, 1r1+r((z)) |(z)|1+r1r, and |h(z)|2r(z)1r2.

    Theorem 3.1. Let ϱ=(1A1B)β. Then for (γκ)>ϱ,

    R(m,β)[A,B,γ+1,η]R(m,β)[A,B,γ,η].

    Proof. Let f(z)R(m,β)[A,B,γ+1,η]. Set

    φ(z)=z(Hγ+1,κλ,ηf(z))Hγ+1,κλ,ηf(z), (3.1)

    then φ(z)P(m,β)[A,B]. Now, Assume that

    ψ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z). (3.2)

    Plugging (1.10) in (3.2), we get

    ψ(z)=(γ+κκ)(Hγ+1,κλ,ηf(z))(γκ)(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z).

    It follows that

    Hγ,κλ,ηf(z)(κγ+κ)(ψ(z)+γκ)=Hγ+1,κλ,ηf(z).

    After performing logarithmic differentiation and simple computation, we get

    ψ(z)+zψ(z)ψ(z)+γκ=φ(z). (3.3)

    Now, for m2, consider

    ψ(z)=(m4+12)ψ1(z)(m412)ψ2(z). (3.4)

    Combining (3.3) and (3.4) with the similar technique as used in Theorem 3.1 of [20], we get

    φ(z)=(m4+12)φ1(z)(m412)φ2(z),

    where

    φi(z)=ψi(z)+zψi(z)ψi(z)+γκ,

    for i=1,2. Since φ(z)P(m,β)[A,B], therefore

    φi(z)=ψi(z)+zψi(z)ψi(z)+γκ(1+Az1+Bz)β,

    for i=1,2. By using Lemma 2.1 and the condition (γκ)>ϱ, we have

    (γκ+(1+Az1+Bz)β)>0,

    where ϱ=(1A1B)β. Hence, in view of Lemma 2.2, we have

    ψi(z)(1+Az1+Bz)β,

    for i = 1, 2. This implies ψ(z)P(m,β)[A,B], so

    f(z)R(m,β)[A,B,γ,η],

    which is required to prove.

    Theorem 3.2. If (λη)>ϱ, where ϱ=(1A1B)β, then

    R(m,β)[A,B,γ,η]R(m,β)[A,B,γ,η+1].

    Proof. Let f(z)R(m,β)[A,B,γ,η]. Taking

    φ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z), (3.5)

    we have φ(z)P(m,β)[A,B]. Now, suppose that

    ψ(z)=z(Hγ,κλ,η+1f(z))Hγ,κλ,η+1f(z). (3.6)

    Applying the relation (1.11) in the Eq (3.6), we have

    ψ(z)=(λ+ηλ)(Hγ,κλ,ηf(z))(ηλ)(Hγ,κλ,η+1f(z))Hγ,κλ,η+1f(z).

    arrives at

    Hγ,κλ,η+1f(z)(λη+λ)(ψ(z)+ηλ)=Hγ,κλ,ηf(z).

    So by the logarithmic differentiation and simple computation we get,

    ψ(z)+zψ(z)ψ(z)+ηλ=φ(z). (3.7)

    Therefore, for m2, take

    ψ(z)=(m4+12)ψ1(z)(m412)ψ2(z). (3.8)

    Combining Eqs (3.6) and (3.7) using the similar technique as in Theorem 3.1 of [20], we get

    φ(z)=(m4+12)φ1(z)(m412)φ2(z),

    where

    φi(z)=ψi(z)+zψi(z)ψi(z)+ηλ,

    for i=1,2. Since φ(z)P(m,β)[A,B], therefore

    φi(z)=ψi(z)+zψi(z)ψi(z)+ηλ(1+Az1+Bz)β,

    for i=1,2. Applying Lemma 2.1 and the condition (ηλ)>ϱ, we get

    (ηλ+(1+Az1+Bz)β)>0,

    where ϱ=(1A1B)β. Hence, by Lemma 2.2, we have

    ψi(z)(1+Az1+Bz)β,

    for i = 1, 2. This implies ψ(z)P(m,β)[A,B], so

    f(z)R(m,β)[A,B,γ,η+1],

    which completes the proof.

    Corollary 3.1. For m=2, if (γκ)>ϱ, where ϱ=(1A1B)β. Then

    SΛβ[A,B,γ+1,η]SΛβ[A,B,γ,η].

    Moreover, if (λη)>ϱ, then

    SΛβ[A,B,γ,η]SΛβ[A,B,γ,η+1].

    Theorem 3.3. Let ϱ=(1A1B)β. Then for (γκ)>ϱ,

    V(m,β)[A,B,γ+1,η]V(m,β)[A,B,γ,η].

    Proof. By means of theorem 3.1 and Alexander relation defined in (1.12), we get

    fV(m,β)[A,B,γ+1,η]zfR(m,β)[A,B,γ+1,η]zfR(m,β)[A,B,γ,η]fV(m,β)[A,B,γ,η].

    Hence the result.

    Analogously, we can prove the following theorem.

    Theorem 3.4. If (λη)>ϱ, where ϱ=(1A1B)β, then

    V(m,β)[A,B,γ,η]V(m,β)[A,B,γ,η+1].

    Corollary 3.2. For m=2, if (γκ)>ϱ, where ϱ=(1A1B)β. Then

    Cβ[A,B,γ+1,η]Cβ[A,B,γ,η].

    Moreover, if (λη)>ϱ, then

    Cβ[A,B,γ,η]Cβ[A,B,γ,η+1].

    Theorem 3.5. Let ϱ=(1A1B)β, and (γκ)>ϱ. Then

    T(m,β)[A,B;γ+1,η]T(m,β)[A,B;γ,η].

    Proof. Let f(z)T(m,β)[A,B,γ+1,η]. Then there exist ψ(z)SΛβ[A,B,γ+1,η] such that

    φ(z)=z(Hγ+1,κλ,ηf(z))Hγ+1,κλ,ηψ(z)P(m,β)[A,B]. (3.9)

    Now consider

    ϕ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηψ(z). (3.10)

    Since ψ(z)SΛβ[A,B,γ+1,η] and (γκ)>ϱ, therefore by Corollary 3.3, ψ(z)SΛβ[A,B,γ,η]. So

    q(z)=z(Hγ,κλ,ηψ(z))Hγ,κλ,ηψ(z)Pβ[A,B]. (3.11)

    By doing some simple calculations on (3.11), we get

    (κq(z)+γ)Hγ,κλ,ηψ(z)=(γ+κ)Hγ+1,κλ,ηψ(z). (3.12)

    Now applying the relation (1.10) on (3.10), we get

    ϕ(z)Hγ,κλ,ηψ(z)=γ+κκHγ+1,κλ,ηf(z)γκHγ,κλ,ηf(z). (3.13)

    Differentiating both sides of (3.13), we have

    ϕ(z)(Hγ,κλ,ηψ(z))+ϕ(z)Hγ,κλ,ηψ(z)=γ+κκ(Hγ+1,κλ,ηf(z))γκ(Hγ,κλ,ηf(z)).

    By using (3.12) and with some simple computations, we get

    ϕ(z)+zϕ(z)q(z)+γκ=φ(z)P(m,β)[A,B], (3.14)

    with (q(z)+γκ)>0, since q(z)Pβ[A,B], so by Lemma 2.1, (q(z)>ϱ and (γκ)>ϱ. Now consider

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z). (3.15)

    Combining (3.14) and (3.15) with the similar technique as used in Theorem 3.1 of [20], we get

    φ(z)=(m4+12)φ1(z)(m412)φ2(z), (3.16)

    where

    φi(z)=ϕ(z)+zϕzq(z)+γκ,

    for i=1,2. Since φ(z)P(m,β)[A,B], therefore

    φi(z)(1+Az1+Bz)β,i=1,2.

    Using the fact of Lemma 2.2, we can say that

    ϕi(z)(1+Az1+Bz)β,i=1,2.

    So, ϕ(z)P(m,β)[A,B]. Hence we get the required result.

    Theorem 3.6. If (λη)>ϱ, where ϱ=(1A1B)β, then

    T(m,β)[A,B,γ,η]T(m,β)[A,B,γ,η+1].

    Let f(z)T(m,β)[A,B,γ,η]. Then there exist ψ(z)SΛβ[A,B,γ,η] such that

    φ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηψ(z)P(m,β)[A,B]. (3.17)

    Taking

    ϕ(z)=z(Hγ,κλ,η+1f(z))Hγ,κλ,η+1ψ(z). (3.18)

    As we know that, ψ(z)SΛβ[A,B,γ,η] and (ηλ)>ϱ, therefore by Corollary 3.3, ψ(z)SΛβ[A,B,γ,η+1]. So

    q(z)=z(Hγ,κλ,η+1ψ(z))Hγ,κλ,η+1ψ(z)Pβ[A,B]. (3.19)

    By doing some simple calculations on (3.19) with the help of (1.11), we get

    (λq(z)+η)Hγ,κλ,η+1ψ(z)=(η+λ)Hγ,κλ,ηψ(z). (3.20)

    Now, applying the relation (1.11) on (3.18), we get

    ϕ(z)Hγ,κλ,η+1ψ(z)=η+λλHγ,κλ,ηf(z)ηλHγ,κλ,η+1f(z). (3.21)

    Differentiating both sides of Eq (3.21), we have

    ϕ(z)(Hγ,κλ,η+1ψ(z))+ϕ(z)Hγ,κλ,η+1ψ(z)=η+λλ(Hγ,κλ,ηf(z))ηλ(Hγ,κλ,η+1f(z)),

    some simple calculations along with using (3.20) give us

    ϕ(z)+zϕ(z)q(z)+ηλ=φ(z)P(m,β)[A,B], (3.22)

    with (q(z)+ηλ)>0. Since q(z)Pβ[A,B], so applying Lemma 2.1, we have (q(z)>ϱ and (ηλ)>ϱ.

    Assume that

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z). (3.23)

    Combining (3.22) and (3.23), along with using the similar technique as in Theorem 3.1 of [20], we get

    φ(z)=(m4+12)φ1(z)(m412)φ2(z), (3.24)

    where

    φi(z)=ϕ(z)+zϕzq(z)+ηλ,

    for i=1,2. Since φ(z)P(m,β)[A,B], therefore

    φi(z)(1+Az1+Bz)β,i=1,2.

    Applying the fact of Lemma 2.2, we have

    ϕi(z)(1+Az1+Bz)β,i=1,2.

    So ϕ(z)P(m,β)[A,B]. Which gives us the required result.

    Corollary 3.3. If ϱ>min{(γκ),(λη)}, where ϱ=(1A1B)β, then we have the following inclusion relations:

    (i) R(m,β)[A,B,γ+1,η]R(m,β)[A,B,γ,η]R(m,β)[A,B,γ,η+1].

    (ii)V(m,β)[A,B,γ+1,η]V(m,β)[A,B,γ,η]V(m,β)[A,B,γ,η+1].

    (iii)T(m,β)[A,B,γ+1,η]T(m,β)[A,B,γ,η]T(m,β)[A,B,γ,η+1].

    Now, we will discuss some radius results for our defined classes.

    Theorem 3.7. Let ϱ=(1A1B)β, and (γκ)>ϱ. Then

    R(m,β)[A,B,γ,η]R(m,β)[ϱ,γ+1,η]

    whenever

    |z|<ro=1ϱ2ϱ+32ϱ,where0ϱ<1.

    Proof. Let f(z)R(m,β)[A,B,γ,η]. Then

    ψ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z)P(m,β)[A,B]. (3.25)

    In view of Lemma 2.1 P(m,β)[A,B]Pm(ϱ), for ϱ=(1A1B)β, therefore ψ(z)Pm(ϱ). So by the Definition of Pm(ϱ) given in [22], there exist two functions ψ1(z),ψ2(z)P(ϱ) such that

    ψ(z)=(m4+12)ψ1(z)(m412)ψ2(z), (3.26)

    with m2 and (ψi(z))>ϱ,i=1,2. We can write

    ψi(z)=(1ϱ)hi(z)+ϱ, (3.27)

    where hi(z)P and (hi(z)>0, for i=1,2. Now, let

    ϕ(z)=z(Hγ+1,κλ,ηf(z))Hγ+1,κλ,ηf(z). (3.28)

    We have to check when ϕ(z)Pm(ϱ). Using relation (1.10) in (3.25), we get

    ψ(z)Hγ+1,κλ,ηf(z)=(γ+κκ)(Hγ+1,κλ,η(f(z)))(γκ)(Hγ,κλ,η(f(z))).

    So, by simple calculation and logarithmic differentiation, we get

    ψ(z)+zψzψ(z)+γκ=ϕ(z). (3.29)

    Now, consider

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z),

    where

    ϕi(z)=ψi(z)+zψizψi(z)+γκ,i=1,2.

    To derive the condition for ϕi(z) to be in P(ϱ), consider

    (ϕi(z)ϱ)=(ψi(z)+zψizψi(z)+γκϱ).

    In view of (3.27), we have

    (ϕi(z)ϱ)=((1ϱ)hi(z)+ϱ+z(1ϱ)hi(z)γκ+ϱ+(1ϱ)hi(z)ϱ)(1ϱ)(hi(z))(1ϱ)|zhi(z)|(γκ+ϱ)+(1ϱ)(hi(z)). (3.30)

    We have, (γκ+ϱ)>0 since (γκ)>ϱ. Since hi(z)P, hence by using Lemma 2.3 in inequality (3.30), we have

    (ϕi(z)ϱ)(1ϱ)(hi(z))1ϱ2r1r2(hi(z))(1ϱ)(1r1+r)=(1ϱ)(hi(z))[(1r)2(1ϱ)2r(1r)2(1ϱ)](1ϱ)(1r1+r)[(1r)2(1ϱ)2r(1r)2(1ϱ)]=r2(1ϱ)2r(2ϱ)+(1ϱ)1r2. (3.31)

    Since 1r2>0, letting T(r)=r2(1ϱ)2r(2ϱ)+(1ϱ). It is easy to note that T(0)>0 and T(1)<0. Hence, there is a root of T(r) between 0 and 1. Let ro be the root then by simple calculations, we get

    ro=1ϱ2ϱ+32ϱ.

    Hence ϕ(z)Pm(ϱ) for |z|<ro. Thus for this radius ro the function f(z) belongs to the class R(m,β)[ϱ,γ+1,η], which is required to prove.

    Theorem 3.8. Let ϱ=(1A1B)β, and (λη)>ϱ. Then

    R(m,β)[A,B,γ,η+1]R(m,β)[ϱ,γ,η],

    whenever

    |z|<ro=1ϱ2ϱ+32ϱ,where0ϱ<1.

    Proof. Let f(z)R(m,β)[A,B,γ,η+1]. Then

    ψ(z)=z(Hγ,κλ,η+1f(z))Hγ,κλ,η+1f(z)P(m,β)[A,B]. (3.32)

    By applying of Lemma 2.1, we get P(m,β)[A,B]Pm(ϱ), for ϱ=(1A1B)β, therefore ψ(z)Pm(ϱ). Hence, the Definition of Pm(ϱ) given in [22], there exist two functions ψ1(z),ψ2(z)P(ϱ) such that

    ψ(z)=(m4+12)ψ1(z)(m412)ψ2(z), (3.33)

    with m2 and (ψi(z))>ϱ,i=1,2. We can say that

    ψi(z)=(1ϱ)hi(z)+ϱ, (3.34)

    where hi(z)P and (hi(z)>0, for i=1,2. Now, assume

    ϕ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z). (3.35)

    Here, We have to obtain the condition for which ϕ(z)Pm(ϱ). Using relation (1.11) in (3.51), we get

    ψ(z)Hγ,κλ,ηf(z)=(η+λλ)(Hγ,κλ,η(f(z)))(ηλ)(Hγ,κλ,η+1(f(z))).

    Thus, by simple calculation and logarithmic differentiation, we have

    ψ(z)+zψzψ(z)+ηλ=ϕ(z). (3.36)

    Now, consider

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z),

    where

    ϕi(z)=ψi(z)+zψizψi(z)+ηλ,i=1,2.

    To derive the condition for ϕi(z) to be in P(ϱ), consider

    (ϕi(z)ϱ)=(ψi(z)+zψizψi(z)+ηλϱ).

    In view of (3.34), we have

    (ϕi(z)ϱ)=((1ϱ)hi(z)+ϱ+z(1ϱ)hi(z)ηλ+ϱ+(1ϱ)hi(z)ϱ)(1ϱ)(hi(z))(1ϱ)|zhi(z)|(ηλ+ϱ)+(1ϱ)(hi(z)). (3.37)

    Here, (ηλ+ϱ)>0 since (ηλ)>ϱ. We know that hi(z)P, therefore by using Lemma 2.3 in inequality (3.37), we have

    (ϕi(z)ϱ)(1ϱ)(hi(z))1ϱ2r1r2(hi(z))(1ϱ)(1r1+r)=(1ϱ)(hi(z))[(1r)2(1ϱ)2r(1r)2(1ϱ)](1ϱ)(1r1+r)[(1r)2(1ϱ)2r(1r)2(1ϱ)]=r2(1ϱ)2r(2ϱ)+(1ϱ)1r2. (3.38)

    Since 1r2>0, letting T(r)=r2(1ϱ)2r(2ϱ)+(1ϱ). It can easily be seen that T(0)>0 and T(1)<0. Hence, there is a root of T(r) between 0 and 1. Let ro be the root then by simple calculations, we get

    ro=1ϱ2ϱ+32ϱ.

    Hence ϕ(z)Pm(ϱ) for |z|<ro. Thus for this radius ro the function f(z) belongs to the class R(m,β)[ϱ,γ,η], which is required to prove.

    Corollary 3.4. Let ϱ=(1A1B)β. Then, for m=2, and |z|<ro=1ϱ2ϱ+32ϱ,

    (i) If (γκ)>ϱ, then SΛβ[A,B,γ,η]SΛβ[ϱ,γ+1,η].

    (ii) If(λη)>ϱ, then SΛβ[A,B,γ,η+1]SΛβ[ϱ,γ,η].

    Theorem 3.9. Let ϱ=(1A1B)β. Then for |z|<ro=1ϱ2ϱ+32ϱ, we have

    (1)V(m,β)[A,B,γ,η]V(m,β)[ϱ,γ+1,η], if (γκ)>ϱ.

    (2)V(m,β)[A,B,γ,η+1]V(m,β)[ϱ,γ,η], if (λη)>ϱ.

    Proof. The above results can easily be proved by using Theorem 3.10, Theorem 3.11 and the Alexander relation defined in (1.12).

    Theorem 3.10. Let ϱ=(1A1B)β, and (γκ)>ϱ. Then

    T(m,β)[A,B,γ,η]T(m,β)[ϱ,γ+1,η],

    whenever

    |z|<ro=1ϱ2ϱ+32ϱ,where0ϱ<1.

    Proof. Let fT(m,β)[A,B,γ,η], then there exist ψ(z)SΛβ[A,B,γ,η] such that

    φ(z)=z(Hγ,κλ,ηf(z))Hγ,κλ,ηψ(z)P(m,β)[A,B]. (3.39)

    Since by Lemma 2.1 we know that P(m,β)[A,B]Pm(ϱ), where ϱ=(1A1B)β, therefore φ(z)Pm(ϱ). So by using the Definition of Pm(ϱ) defined in [22], there exist two functions φ1(z) and φ2(z) such that

    φ(z)=(m4+12)φ1(z)(m412)φ2(z), (3.40)

    where φi(z)P(ϱ),i=1,2. We can write

    φi(z)=ϱ+(1ϱ)hi(z), (3.41)

    where hi(z)P. Now, let

    ϕ(z)=z(Hγ+1,κλ,ηf(z))Hγ+1,κλ,ηψ(z).

    Since ψ(z)SΛβ[A,B,γ,η], therefore

    q(z)=z(Hγ,κλ,ηψ(z))Hγ,κλ,ηψ(z)Pβ[A,B], (3.42)

    then by using relation (1.10) and doing some simple computation on Eq (3.42), we have

    (κq(z)+γ)Hγ,κλ,ηψ(z)=(γ+κ)Hγ+1,κλ,ηψ(z). (3.43)

    Now, using relation (1.10) in (3.39), we get

    φ(z)=(γ+κκ)(Hγ+1,κλ,ηf(z))(γκ)(Hγ,κλ,ηf(z))Hγ,κλ,ηψ(z). (3.44)

    By some simple calculations along with differentiation of both sides of (3.44) and then applying (3.43) we get the following relation

    φ(z)+zφ(z)q(z)+(γκ)=ϕ(z).

    Let us consider

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z),

    where

    ϕi(z)=φi(z)+zφi(z)q(z)+(γκ),

    i=1,2. Since q(z)Pβ[A,B]P(ϱ). Therefore, we can write

    q(z)=ϱ+(1ϱ)qo(z), (3.45)

    where qo(z)P. We have to check when ϕi(z)Pm(ϱ). For this consider

    (ϕi(z)ϱ)=(φi(z)+zφi(z)q(z)+(γκ)ϱ).

    Using (3.41) and (3.45), we have

    (ϕi(z)ϱ)=(ϱ+(1ϱ)hi(z)+(1ϱ)zhi(z)ϱ+(1ϱ)qo(z)+(γκ)ϱ),

    where hi(z),qo(z)P.

    (ϕi(z)ϱ)=(1ϱ)(hi(z))(1ϱ)|zhi(z)|(ϱ+γκ)+(1ϱ)qo(z).

    Since (γκ)>ϱ, so (ϱ+γκ)>0. Now by using the distortion results of Lemma 2.3, we have

    (ϕi(z)ϱ)=((1ϱ)hi(z)+ϱ+z(1ϱ)hi(z)γκ+ϱ+(1ϱ)hi(z)ϱ)(1ϱ)(hi(z))(1ϱ)|zhi(z)|(γκ+ϱ)+(1ϱ)(hi(z)). (3.46)

    Since hi(z)P, so (hi(z))>0 and (γκ+ϱ)>0 for (γκ)>ϱ. Hence, by using Lemma 2.3 in inequality (3.46), we have

    (ϕi(z)ϱ)(1ϱ)(hi(z))1ϱ2r1r2(hi(z))(1ϱ)(1r1+r)r2(1ϱ)2r(2ϱ)+(1ϱ)1r2.

    Since 1r2>0, taking T(r)=r2(1ϱ)2r(2ϱ)+(1ϱ). Let ro be the root then by simple calculations, we get

    ro=1ϱ2ϱ+32ϱ.

    Hence ϕ(z)Pm(ϱ) for |z|<ro. Thus for this radius ro the function f(z) belongs to the class T(m,β)[ϱ,γ+1,η], which is required to prove.

    Using the analogous approach used in Theorem 3.14, one can easily prove the following theorem.

    Theorem 3.11. Let ϱ=(1A1B)β, and (ηλ)>ϱ. Then

    T(m,β)[A,B,γ,η+1]T(m,β)[ϱ,γ,η]

    whenever

    |z|<ro=1ϱ2ϱ+32ϱ,where0ϱ<1.

    Integral Preserving Property: Here, we will discuss some integral preserving properties of our aforementioned classes. The generalized Libera integral operator Iσ introduced and discussed in [6,14] is defined by:

    Iσ(f)(z)=σ+1zσz0tσ1f(t)dt, (3.47)

    where f(z)A and σ>1.

    Theorem 3.12. Let σ>ϱ, where ϱ=(1A1B)β. If fR(m,β)[A,B,γ,η] then Iσ(f)R(m,β)[A,B,γ,η].

    Proof. Let fR(m,β)[A,B,γ,η], and set

    ψ(z)=z(Hγ,κλ,ηIσ(f)(z))Hγ,κλ,ηIσ(f)(z), (3.48)

    where ψ(z) is analytic and ψ(0)=1. From definition of Hγ,κλ,η(f) given by [1] and using Eq (3.47), we have

    z(Hγ,κλ,ηIσ(f)(z))=(σ+1)Hγ,κλ,ηf(z)σHγ,κλ,ηIσ(f)(z). (3.49)

    Then by using Eqs (3.48) and (3.49), we have

    (σ+1)Hγ,κλ,ηf(z)Hγ,κλ,ηIσ(f)(z)=ψ(z)+σ.

    Logarithmic differentiation and simple computation results in

    ϕ(z)=ψ(z)+zψ(z)ψ(z)+σ=z(Hγ,κλ,ηf(z))Hγ,κλ,ηf(z)P(m,β)[A,B], (3.50)

    with (ψ(z)+σ)>0, since (σ)>ϱ. Now, consider

    ψ(z)=(m4+12)ψ1(z)(m412)ψ2(z). (3.51)

    Combining (3.50) and (3.51), we get

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z),

    where ϕi(z)=ψi(z)+zψi(z)ψi(z)+σ, i=1,2. Since ϕ(z)P(m,β)[A,B], therefore

    ϕi(z)(1+Az1+Bz)β,

    which implies

    ψi(z)+zψi(z)ψi(z)+σ(1+Az1+Bz)βi=1,2.

    Therefore, using Lemma 2.2 we get

    ψi(z)(1+Az1+Bz)β,

    or ψ(z)P(m,β)[A,B]. Hence the result.

    Corollary 3.5. Let σ>ϱ. Then for m=2, if fSΛβ[A,B,γ,η] then Iσ(f)SΛβ[A,B,γ,η], where ϱ=(1A1B)β.

    Theorem 3.13. Let σ>ϱ, where ϱ=(1A1B)β. If fV(m,β)[A,B,γ,η] then Iσ(f)V(m,β)[A,B,γ,η].

    Proof. Let fV(m,β)[A,B,γ,η]. Then by using relation (1.12), we have

    zf(z)R(m,β)[A,B,γ,η],

    so by using Theorem 3.16, we can say that

    Iσ(zf(z))R(m,β)[A,B,γ,η],

    equivalently

    z(Iσ(f(z)))R(m,β)[A,B,γ,η],

    so again by using the relation (1.12), we get

    Iσ(f)V(m,β)[A,B,γ,η].

    Theorem 3.14. Let σ>ϱ, where ϱ=(1A1B)β. If fT(m,β)[A,B,γ,η] then Iσ(f)T(m,β)[A,B,γ,η].

    Proof. Let fT(m,β)[A,B,γ,η]. Then there exists ψ(z)SΛβ[A,B,γ,η], such that

    φ(z)=z(Hγ,κλ,ηf(z))(Hγ,κλ,ηψ(z)P(m,β)[A,B]. (3.52)

    Consider

    ϕ(z)=z(Hγ,κλ,ηIσ(f)(z))Hγ,κλ,ηIσ(ψ)(z). (3.53)

    Since ψ(z)SΛβ[A,B,γ,η], then by Corollary 3.17, Iσ(ψ)(z)SΛβ[A,B,γ,η]. Therefore

    q(z)=z(Hγ,κλ,ηIσ(ψ)(z))Hγ,κλ,ηIσ(ψ)(z)Pβ[A,B]. (3.54)

    By using (3.47) and Definition of Hγ,κλ,η, we get

    q(z)Hγ,κλ,ηIσ(ψ)(z)=(σ+1)Hγ,κλ,η(ψ)(z)σHγ,κλ,ηIσ(ψ)(z),

    or we can write it as

    Hγ,κλ,ηIσ(ψ)(z)=σ+1q(z)+σHγ,κλ,η(ψ)(z). (3.55)

    Now using the relation (3.47) and the Definition of Hγ,κλ,η, in (3.53), we have

    ϕ(z)Hγ,κλ,ηIσ(ψ)(z)=(σ+1)Hγ,κλ,η(f)(z)σHγ,κλ,ηIσ(f)(z). (3.56)

    Differentiating both sides of (3.56), we have

    ϕ(z)Hγ,κλ,ηIσ(ψ)(z)+ϕ(z)(Hγ,κλ,ηIσ(ψ)(z))=(σ+1)(Hγ,κλ,η(f)(z))σ(Hγ,κλ,ηIσ(f)(z)),

    then by simple computations and using (3.53)–(3.55), we get

    ϕ(z)+zϕ(z)q(z)+σ=φ(z), (3.57)

    with (σ)>ϱ, so (q(z)+σ)>0, since q(z)Pβ[A,B]P(ϱ). Consider

    ϕ(z)=(m4+12)ϕ1(z)(m412)ϕ2(z), (3.58)

    Combining Eqs (3.57) and (3.58), we have

    φ(z)=(m4+12)φ1(z)(m412)φ2(z), (3.59)

    where φi(z)=ϕi(z)+zϕi(z)q(z)+σ, i=1,2.

    Since φ(z)P(m,β)[A,B], thus we have

    φi(z)(1+Az1+Bz)β,

    then

    ϕi(z)+zϕi(z)q(z)+σ(1+Az1+Bz)β,i=1,2.

    Since (q(z)+σ)>0, therefore using Lemma 2.2 we get

    ϕi(z)(1+Az1+Bz)β,i=1,2,

    thus ϕ(z)P(m,β)[A,B]. Hence the result.

    Due to their vast applications, Mittag-Leffler functions have captured the interest of a number of researchers working in different fields of science. The present investigation may help researchers comprehend some stimulating consequences of the special functions. In the present article, we have used generalized Mittag-Leffler functions to define some novel classes related to bounded boundary and bounded radius rotations. Several inclusion relations and radius results for these classes have been discussed. Moreover, it has been proved that these classes are preserved under the generalized Libera integral operator. Finally, we can see that the projected solution procedure is highly efficient in solving inclusion problems describing the harmonic analysis. It is hoped that our investigation and discussion will be helpful in cultivating new ideas and applications in different fields of science, particularly in mathematics.

    Δ Open Unit Disc.

    Ω Class of normalized analytic functions.

    Real part of complex number.

    Γ Gamma function.

    χ(z) Schwartz function.

    The authors declare that they have no competing interests.

    The authors would like to thank the Rector of COMSATS Univeristy Islamabad, Pakistan for providing excellent research oriented environment. The author Thabet Abdeljawad would like to thank Prince Sultan University for the support through TAS research Lab.

    [1] Larcher D, Tarascon JM (2015) Towards greener and more sustainable batteries for electrical energy storage. Nat Chem 7: 19–29.
    [2] Doughty DH, Butler PC, Akhil AA, et al. (2010) Batteries for Large-Scale Stationary Electrical Energy Storage. Electrochem Soc Interface 19: 49–53.
    [3] Benato R, Cosciani N, Crugnola G, et al. (2015) Sodium nickel chloride battery technology for large-scale stationary storage in the high voltage network. J Power Sources 293: 127–136. doi: 10.1016/j.jpowsour.2015.05.037
    [4] Lu X, Xia G, Lemmon JP, et al. (2010) Advanced materials for sodium-beta alumina batteries: Status, challenges and perspectives. J Power Sources 195: 2431–2442. doi: 10.1016/j.jpowsour.2009.11.120
    [5] Hong HYP (1976) Crystal Structure and Crystal Chemistry in the System Na1+xZr2SixP3−xO12. Mater Res Bull 11: 173–182. doi: 10.1016/0025-5408(76)90073-8
    [6] Goodenough JB, Hong HYP, Kafalas JA (1976) Fast Na+-Ion Transport in Skeleton Structures. Mater Res Bull 11: 203–220. doi: 10.1016/0025-5408(76)90077-5
    [7] Kim J, Jo SH, Bhavaraju S, et al. (2015) Low temperature performance of sodium–nickel chloride batteries with NaSICON solid electrolyte. J Electroanal Chem 759: 201–206. doi: 10.1016/j.jelechem.2015.11.022
    [8] May GJ, Hooper A (1978) The effect of microstructure and phase composition on the ionic conductivity of magnesium-doped sodium-beta-alumina. J Mater Sci 13: 1480–1486. doi: 10.1007/BF00553202
    [9] Clearfield A, Guerra R, Oskarsson A, et al. (1983) Preparation of Sodium Zirconium Phosphates of the Type Na1+4xZr2−x(PO4)3. Mater Res Bull 18: 1561–1567. doi: 10.1016/0025-5408(83)90198-8
    [10] von Alpen U, Bell MF, Höfer HH (1981) Compositional Dependence of the Electrochemical and Structural Parameters in the NASICON System (Na1+xSixZr2P3−xO12). Solid State Ionics 3–4: 215–218.
    [11] Boilot JP, Salanié JP, Desplanches G, et al. (1979) Phase Transformation in Na1+xSixZr2P3–xO12 Compounds. Mater Res Bull 14: 1469–1477. doi: 10.1016/0025-5408(79)90091-6
    [12] Kohler H, Schultz H, Melnikov O (1983) Composition and Conduction Mechanism of the NASICON Structure-X-Ray Diffraction Study on two Crystals at Different Temperatures. Mater Res Bull 18: 1143–1152. doi: 10.1016/0025-5408(83)90158-7
    [13] Tsai CL, Hong HYP (1983) Investigation of phases and stability of solid electrolytes in the NASICON system. Mater Res Bull 18: 1399–1407. doi: 10.1016/0025-5408(83)90048-X
    [14] Clearfield A, Subramanian MA, Wang W, et al. (1983) The Use of Hydrothermal Procedures to Synthesize NASICON and Some Comments on the Stoichiometry of NASICON Phases. Solid State Ionics 9–10: 895–902.
    [15] Kohler H, Schultz H (1985) NASICON Solid Electrolytes Part I: The Na+-Diffusion Path and Its Relation to the Structure. Mater Res Bull 20: 1461–1471. doi: 10.1016/0025-5408(85)90164-3
    [16] Boilot JP, Collin G, Comes R (1983) Zirconium Deficiency in NASICON-Type Compounds: Crystal Structure of Na5Zr(PO4)3. J Solid State Chem 50: 91–99. doi: 10.1016/0022-4596(83)90236-0
    [17] Boilot JP, Collin G, Comes R (1983) Stoichiometry and phase transitions in NASICON type compounds. Solid State Ionics 9–10: 829–834.
    [18] Boilot JP, Collin G, Colomban Ph (1987) Crystal Structure of the True NASICON: Na3Zr2Si2PO12. Mater Res Bull 22: 669–676. doi: 10.1016/0025-5408(87)90116-4
    [19] Boilot JP, Colomban Ph, Collin G (1988) Stoichiometry-Structure-Fast Ion Conduction in the NASICON Solid Solution. Solid State Ionics 28–30: 403–410.
    [20] Lucco-Borlera M, Mazza D, Montanaro L, et al. (1997) X-ray characterization of the new NASICON compositions Na3Zr2−x/4Si2−xP1+xO12 with x = 0.333, 0.667, 1.000, 1.333, 1.667. Powder Diffr 12: 171–174.
    [21] Bohnke O, Ronchetti S, Mazza D (1999) Conductivity measurements on NASICON and nasicon-modified materials. Solid State Ionics 122: 127–136. doi: 10.1016/S0167-2738(99)00062-4
    [22] Naqash S, Ma Q, Tietz F, et al. (2017) Na3Zr2(SiO4)2(PO4) prepared by a solution-assisted solid state reaction. Solid State Ionics 302: 83–91. doi: 10.1016/j.ssi.2016.11.004
    [23] Engell J, Mortensen S, Møller L (1983) Fabrication of NASICON Electrolytes from Metal Alkoxide Derived Gels. Solid State Ionics 9–10: 877–884.
    [24] Warhus U (1986) Synthese und Stabilität des NASICON Mischkristallsystems (Na1+xZr2SixP3−xO12, 0 ≤ x ≤ 3) [PhD thesis]. University of Stuttgart.
    [25] Kreuer KD, Kohler H, Maier J (1989) Sodium Ion Conductors with NASICON Framework Structure, In: Takahashi T, High Conductivity Ionic Conductors: Recent Trends and Application, Singapore: World Scientific Publishing Co., 242–279.
    [26] Warhus U, Maier J, Rabenau A (1988) Thermodynamics of NASICON (Na1+xZr2SixP3−xO12). J Solid State Chem 72: 113–125. doi: 10.1016/0022-4596(88)90014-X
    [27] Mason TO, Hummel FA (1974) Compatibility Relations in the System SiO2-ZrO2-P2O5. J Am Ceram Soc 57: 538–539. doi: 10.1111/j.1151-2916.1974.tb10808.x
    [28] Turkdogan ET, Maddocks WR (1952) Phase Equilibrium Investigation of the Na2O-SiO2-P2O5 Ternary System. J Iron Steel Inst 172: 1–15.
    [29] Milne SJ, West AR (1983) Compound formation and conductivity in the system Na2O-ZrO2-P2O5: Sodium zirconium orthophosphates. Solid State Ionics 9–10: 865–868.
    [30] Milne SJ, West AR (1985) Zr-Doped Na3PO4: Crystal Chemistry, Phase Relations, and Polymorphism. J Solid State Chem 57: 166–177. doi: 10.1016/S0022-4596(85)80006-2
    [31] Vlna M, Petrosyan Y, Kovar V, et al. (1993) Phase Coexistence in the System Na2O-P2O5-ZrO2. Chem Pap 47: 296–297.
    [32] D'Ans J, Löffler J (1930) Untersuchungen im System Na2O-SiO2-ZrO2. Z Anorg Allg Chem 191: 1–35. doi: 10.1002/zaac.19301910102
    [33] Polezhaev YM, Chukhlantsev VG (1965) Triangulation of the System Na2O-ZrO2-SiO2. Izv Akad Nauk SSSR Neorg Mater 1: 1990–1993; Inorg Mater (Engl Transl) 1: 1797–1800.
    [34] Sircar A, Brett NH (1970) Phase Equilibria in Ternary Systems Containing Zirconia and Silica, IV. Preliminary Study of the System Na2O-ZrO2-SiO2. Trans Brit Ceram Soc 69: 131–135.
    [35] Wilson G, Glasser FP (1987) Subsolidus Phase Relations in the System Na2O-ZrO2-SiO2. Brit Ceram Trans J 86: 199–201.
    [36] Nicholas VA, Heyns AM, Kingon AI, et al. (1986) Reactions in the formation of Na3Zr2Si2PO12. J Mater Sci 21: 1967–1973. doi: 10.1007/BF00547935
    [37] Rudolf PR, Subramanian MA, Clearfield A, et al. (1985) The Crystal Structure of a Nonstoichiometric NASICON. Mater Res Bull 20: 643–651. doi: 10.1016/0025-5408(85)90142-4
    [38] Rudolf PR, Clearfield A, Jorgensen JD (1986) Rietveld Refinement Results on Three Nonstoichiometric Monoclinic NASICONs. Solid State Ionics 21: 213–224. doi: 10.1016/0167-2738(86)90075-5
    [39] Yde-Andersen S, Lundgaard JS, Møller L, et al. (1984) Properties of NASICON Electrolytes Prepared from Alkoxide Derived Gels: Ionic Conductivity, Durability in Molten Sodium and Strength Test Data. Solid State Ionics 14: 73–79. doi: 10.1016/0167-2738(84)90014-6
    [40] Perthuis H, Colomban Ph (1986) Sol-Gel Routes Leading to Nasicon Ceramics. Ceram Int 12: 39–52. doi: 10.1016/S0272-8842(86)80008-6
    [41] Maier J, Warhus U, Gmelin E (1986) Thermodynamic and Electrochemical Investigations of the NASICON Solid Solution System. Solid State Ionics 18–19: 969–973.
    [42] Boilot JP, Collin G, Colomban Ph (1988) Relation Structure-Fast Ion Conduction in the NASICON Solid Solution. J Solid State Chem 73: 160–171. doi: 10.1016/0022-4596(88)90065-5
    [43] Colomban Ph (1986) Orientational Disorder, Glass/Crystal Transition and Superionic Conductivity in NASICON. Solid State Ionics 21: 97–115. doi: 10.1016/0167-2738(86)90201-8
    [44] Park H, Jung K, Nezafati M, et al. (2016) Sodium Ion Diffusion in Nasicon (Na3Zr2Si2PO12) Solid Electrolytes: Effects of Excess Sodium. ACS Appl Mater Interfaces 8: 27814–27824. doi: 10.1021/acsami.6b09992
    [45] Kafalas JA, Cava JR (1979) Effect of Pressure and Composition of Fast Na+-Ion Transport in the System Na1+xZr2SixP3−xO12. Proceedings of the International Conference on Fast Ion Transport in Solids, 419–422.
    [46] Kreuer KD, Warhus U (1986) NASICON Solid Electrolytes: Part IV Chemical Durability. Mater Res Bull 21: 357–363. doi: 10.1016/0025-5408(86)90193-5
  • This article has been cited by:

    1. Muhammad Kamran, Rashad Ismail, Esmail Hassan Abdullatif Al-Sabri, Nadeem Salamat, Muhammad Farman, Shahzaib Ashraf, An Optimization Strategy for MADM Framework with Confidence Level Aggregation Operators under Probabilistic Neutrosophic Hesitant Fuzzy Rough Environment, 2023, 15, 2073-8994, 578, 10.3390/sym15030578
    2. S. Saleh, Tareq M. Al-shami, Abdelwaheb Mhemdi, Ljubisa Kocinac, On Some New Types of Fuzzy Soft Compact Spaces, 2023, 2023, 2314-4785, 1, 10.1155/2023/5065592
    3. Jeonghwan Gwak, Harish Garg, Naeem Jan, Bushra Akram, A new approach to investigate the effects of artificial neural networks based on bipolar complex spherical fuzzy information, 2023, 2199-4536, 10.1007/s40747-022-00959-4
    4. Sami Ullah Khan, Esmail Hassan Abdullatif Al-Sabri, Rashad Ismail, Maha Mohammed Saeed Mohammed, Shoukat Hussain, Arif Mehmood, Prediction Model of a Generative Adversarial Network Using the Concept of Complex Picture Fuzzy Soft Information, 2023, 15, 2073-8994, 577, 10.3390/sym15030577
    5. Zeeshan Ali, Tahir Mahmood, Jeonghwan Gwak, Naeem Jan, A novel extended Portuguese of Interactive and Multi‐Criteria Decision Making and Archimedean Bonferroni mean operators based on prospect theory to select green supplier with complex q‐rung orthopair fuzzy information, 2023, 2468-2322, 10.1049/cit2.12185
    6. Tareq M. Al-shami, Abdelwaheb Mhemdi, Generalized Frame for Orthopair Fuzzy Sets: (m,n)-Fuzzy Sets and Their Applications to Multi-Criteria Decision-Making Methods, 2023, 14, 2078-2489, 56, 10.3390/info14010056
    7. Tareq M. Al-shami, Abdelwaheb Mhemdi, Radwan Abu-Gdairi, A Novel Framework for Generalizations of Soft Open Sets and Its Applications via Soft Topologies, 2023, 11, 2227-7390, 840, 10.3390/math11040840
    8. Kemal Taşköprü, Soft order topology and graph comparison based on soft order, 2023, 8, 2473-6988, 9761, 10.3934/math.2023492
    9. Zaibin Chang, Junchao Wei, Tareq Al-shami, Matrix Approaches for Covering-Based Multigranulation Fuzzy Rough Set Models, 2023, 2023, 2314-4785, 1, 10.1155/2023/3051168
    10. Shanmugam Kalaiselvan, Srinivasan Vijayabalaji, Soft Expert Symmetric Group and Its Application in MCDM Problem, 2022, 14, 2073-8994, 2685, 10.3390/sym14122685
    11. M. Hosny, Tareq M. Al-shami, Abdelwaheb Mhemdi, Novel approaches of generalized rough approximation spaces inspired by maximal neighbourhoods and ideals, 2023, 69, 11100168, 497, 10.1016/j.aej.2023.02.008
    12. Arife Atay, Disjoint union of fuzzy soft topological spaces, 2023, 8, 2473-6988, 10547, 10.3934/math.2023535
    13. Tareq M. Al-shami, Abdelwaheb Mhemdi, A weak form of soft α-open sets and its applications via soft topologies, 2023, 8, 2473-6988, 11373, 10.3934/math.2023576
    14. Tiantai Lin, Bin Yang, The resolution of q-rung orthopair fuzzy set based three-way group conflict analysis, 2023, 10641246, 1, 10.3233/JIFS-224589
    15. Shahzaib Ashraf, Harish Garg, Muneeba Kousar, An industrial disaster emergency decision-making based on China’s Tianjin city port explosion under complex probabilistic hesitant fuzzy soft environment, 2023, 123, 09521976, 106400, 10.1016/j.engappai.2023.106400
    16. Muhammad Sajjad Ali Khan, Saeed Ullah Jan, Rahim Jan, Tapan Senapati, Sarbast Moslem, Complex interval-valued intuitionistic fuzzy decision support system with application to COVID-19 healthcare facilities, 2023, 9, 2199-4536, 7103, 10.1007/s40747-023-01090-8
    17. A. Josy, S. Mathew, J.N. Mordeson, First and second K Banhatti indices of a fuzzy graph applied to decision making, 2024, 678, 00200255, 120961, 10.1016/j.ins.2024.120961
    18. Rizwan Gul, Muhammad Shabir, Tareq M. Al-shami, M. Hosny, A Comprehensive study on (α,β)-multi-granulation bipolar fuzzy rough sets under bipolar fuzzy preference relation, 2023, 8, 2473-6988, 25888, 10.3934/math.20231320
    19. Meiqin Wu, Jiawen Song, Jianping Fan, Three-way decision based on ITARA and public weights DEA under picture fuzzy environment and its application in new energy vehicles selection, 2023, 2199-4536, 10.1007/s40747-023-01188-z
    20. Tareq M. Al-shami, Rodyna A. Hosny, Abdelwaheb Mhemdi, Radwan Abu-Gdairi, Salem Saleh, RETRACTED: Weakly soft b-open sets and their usages via soft topologies: A novel approach, 2023, 45, 10641246, 7727, 10.3233/JIFS-230436
    21. Linlu Gao, Fuyuan Xiao, Danilo Pelusi, A complex belief χ2 divergence in complex evidence theory and its application for pattern classification, 2023, 126, 09521976, 106752, 10.1016/j.engappai.2023.106752
    22. Shio Gai Quek, Harish Garg, Ganeshsree Selvachandran, M. Palanikumar, K. Arulmozhi, Florentin Smarandache, RETRACTED ARTICLE: VIKOR and TOPSIS framework with a truthful-distance measure for the (t, s)-regulated interval-valued neutrosophic soft set, 2023, 1432-7643, 10.1007/s00500-023-08338-y
    23. Rouhollah Kiani-Ghalehno, Ali Mahmoodirad, Providing bank branch ranking algorithm with fuzzy data, using a combination of two methods DEA and MCDM, 2024, 15, 1868-5137, 3563, 10.1007/s12652-024-04833-8
    24. Tareq M. Al-shami, Murad Arar, Radwan Abu-Gdairi, Zanyar A. Ameen, On weakly soft β-open sets and weakly soft β-continuity, 2023, 45, 10641246, 6351, 10.3233/JIFS-230858
    25. Ghous Ali, Sheng Du, Novel MCDM Methods and Similarity Measures for Extended Fuzzy Parameterized Possibility Fuzzy Soft Information with Their Applications, 2023, 2023, 2314-4785, 1, 10.1155/2023/5035347
    26. Tareq M. Al-shami, Rodyna A. Hosny, Radwan Abu-Gdairi, Murad Arar, A novel approach to study soft preopen sets inspired by classical topologies, 2023, 45, 10641246, 6339, 10.3233/JIFS-230191
    27. Faruk Karaaslan, Fatih Karamaz, Interval-valued (p,q,r)-spherical fuzzy sets and their applications in MCGDM and MCDM based on TOPSIS method and aggregation operators, 2024, 255, 09574174, 124575, 10.1016/j.eswa.2024.124575
    28. K. Tamilselvan, V. Visalakshi, Prasanalakshmi Balaji, Applications of picture fuzzy filters: performance evaluation of an employee using clustering algorithm, 2023, 8, 2473-6988, 21069, 10.3934/math.20231073
    29. Ayesha Razzaq, Muhammad Riaz, Muhammad Aslam, Efficient picture fuzzy soft CRITIC-CoCoSo framework for supplier selection under uncertainties in Industry 4.0, 2024, 9, 2473-6988, 665, 10.3934/math.2024035
    30. Muhammad Qiyas, Neelam Khan, Muhammad Naeem, Samuel Okyere, Tareq Al-Shami, Decision-Making Based on Spherical Linear Diophantine Fuzzy Rough Aggregation Operators and EDAS Method, 2023, 2023, 2314-4785, 1, 10.1155/2023/5839410
    31. Xiao Guo, Qinrong Feng, Lin Zhao, A novel parameter reduction method for fuzzy soft sets, 2023, 45, 10641246, 8805, 10.3233/JIFS-232657
    32. Zengtai Gong, Taiqiang Jiang, Weighted continuous triangular fuzzy conflict analysis and its three-way decision method1, 2024, 46, 10641246, 2077, 10.3233/JIFS-231296
    33. Saman Nessari, Mohssen Ghanavati-Nejad, Fariborz Jolai, Ali Bozorgi-Amiri, Sina Rajabizadeh, A data-driven decision-making approach for evaluating the projects according to resilience, circular economy and industry 4.0 dimension, 2024, 134, 09521976, 108608, 10.1016/j.engappai.2024.108608
    34. Zaibin Chang, Lingling Mao, Matrix methods for some new covering-based multigranulation fuzzy rough set models under fuzzy complementary β-neighborhoods, 2024, 46, 10641246, 5825, 10.3233/JIFS-224323
    35. Jawad Ali, Suhad Ali Osman Abdallah, N. S. Abd EL-Gawaad, Decision Analysis Algorithm Using Frank Aggregation in the SWARA Framework with p,qRung Orthopair Fuzzy Information, 2024, 16, 2073-8994, 1352, 10.3390/sym16101352
    36. Ping-Ping Cao, Jin Zheng, Shuang Wang, Ming-Yang Li, Xin-Yan Wang, Large group decision-making considering multiple classifications for participators: a method based on preference information on multiple elements of alternatives, 2023, 2199-4536, 10.1007/s40747-023-01209-x
    37. Kholood Mohammad Alsager, Hajar Abdullah Alharbi, Exploring Symmetry in Industrial Decision-Making: A New Framework Based on Cubic Type-2 Fuzzy Soft Sets, 2024, 16, 2073-8994, 1491, 10.3390/sym16111491
    38. Jian Zheng, Anti-noise twin-hyperspheres with density fuzzy for binary classification to imbalanced data with noise, 2023, 9, 2199-4536, 6103, 10.1007/s40747-023-01089-1
    39. Nosheen Malik, Muhammad Shabir, Tareq M. Al-shami, Rizwan Gul, Abdelwaheb Mhemdi, Medical decision-making techniques based on bipolar soft information, 2023, 8, 2473-6988, 18185, 10.3934/math.2023924
    40. Zeeshan Ali, Zohaib Ahmad Khan, Tapan Senapati, Sarbast Moslem, Frank-Based TOPSIS Methodology of Development and Operations Challenges Based on Intuitionistic Linguistic Aggregation Operators and Their Applications, 2024, 12, 2169-3536, 91605, 10.1109/ACCESS.2024.3420711
    41. Gagandeep Kaur, Harish Garg, A novel algorithm for autonomous parking vehicles using adjustable probabilistic neutrosophic hesitant fuzzy set features, 2023, 226, 09574174, 120101, 10.1016/j.eswa.2023.120101
    42. Lin Shi, Optimized multiple-attribute group decision-making in uncertainty employing TODIM and EDAS technique and application to product styling design quality evaluation, 2024, 46, 10641246, 6093, 10.3233/JIFS-236947
    43. Muhammad Shabir, Saba Ayub, Rizwan Gul, Muhammad Irfan Ali, Algebraic structures of q-rung orthopair fuzzy relations with applications in decision-making, 2024, 0, 2577-8838, 0, 10.3934/mfc.2024035
    44. Jawad Ali, Zareen A. Khan, Interval-Valued p,q-Rung Orthopair Fuzzy Exponential TODIM Approach and Its Application to Green Supplier Selection, 2023, 15, 2073-8994, 2115, 10.3390/sym15122115
    45. José Carlos R. Alcantud, Azadeh Zahedi Khameneh, Gustavo Santos-García, Muhammad Akram, A systematic literature review of soft set theory, 2024, 36, 0941-0643, 8951, 10.1007/s00521-024-09552-x
    46. K. Hamidizadeh, R. Manaviyat, S. Mirvakili, B. Davvaz, Application of soft sets to graph coloring, 2024, 43, 2238-3603, 10.1007/s40314-024-02738-y
    47. Muhammad Saqib, Shahzaib Ashraf, Hafiz Muhammad Athar Farid, Vladimir Simic, Muneeba Kousar, Erfan Babaee Tirkolaee, Benchmarking of industrial wastewater treatment processes using a complex probabilistic hesitant fuzzy soft Schweizer–Sklar prioritized-based framework, 2024, 162, 15684946, 111780, 10.1016/j.asoc.2024.111780
    48. Yibo Dong, Jin Liu, Jiaqi Ren, Zhe Li, Weili Li, Modelling attack and defense games in infrastructure networks with interval-valued intuitionistic fuzzy set payoffs, 2024, 10, 2199-4536, 6249, 10.1007/s40747-024-01495-z
    49. İzzettin Demir, Murat Saldamli, CONVERGENCE THEORY OF BIPOLAR FUZZY SOFT NETS AND ITS APPLICATIONS, 2024, 54, 0035-7596, 10.1216/rmj.2024.54.1005
    50. Shahzad Faizi, Wojciech Sałabun, Mubashar Shah, Tabasam Rashid, A novel approach employing hesitant intuitionistic fuzzy linguistic Einstein aggregation operators within the EDAS approach for multicriteria group decision making, 2024, 10, 24058440, e31407, 10.1016/j.heliyon.2024.e31407
    51. Asad Mubarak, Muhammad Shabir, Waqas Mahmood, Pessimistic multigranulation rough bipolar fuzzy set and their application in medical diagnosis, 2023, 42, 2238-3603, 10.1007/s40314-023-02389-5
    52. Xiaomin Wang, Xueyuan Zhang, Rui Zhou, Group decision-making methods based on probabilistic hesitant N-soft sets, 2023, 45, 10641246, 603, 10.3233/JIFS-222563
    53. Abdulrahman AlAita, Hooshang Talebi, Exact neutrosophic analysis of missing value in augmented randomized complete block design, 2024, 10, 2199-4536, 509, 10.1007/s40747-023-01182-5
    54. Roshdey Mareay, Soft rough sets based on covering and their applications, 2024, 14, 2190-5983, 10.1186/s13362-024-00142-z
    55. Hariwan Z. Ibrahim, Tareq M. Al-shami, Murad Arar, M. Hosny, knm
    -Rung picture fuzzy information in a modern approach to multi-attribute group decision-making, 2024, 10, 2199-4536, 2605, 10.1007/s40747-023-01277-z
    56. Weijun Liu, Jianming Qi, Yu Jin, Zhiyong Zhou, Xu Zhang, Application of fuzzy analytic hierarchy process – multi-layer fuzzy inference system in product design evaluation, 2023, 45, 10641246, 7469, 10.3233/JIFS-230906
    57. Tareq M. Al-shami, Salem Saleh, Alaa M. Abd El-latif, Abdelwaheb Mhemdi, Novel categories of spaces in the frame of fuzzy soft topologies, 2024, 9, 2473-6988, 6305, 10.3934/math.2024307
    58. Muhammad Qiyas, Darjan Karabasevic, Neelam Khan, Srdjan Maričić, Einstein Exponential Operational Laws Based on Fractional Orthotriple Fuzzy Sets and Their Applications in Decision Making Problems, 2024, 12, 2227-7390, 3216, 10.3390/math12203216
    59. Rizwan Gul, Tareq M. Al-shami, Saba Ayub, Muhammad Shabir, M. Hosny, Development of Aczel-Alsina t-norm based linear Diophantine fuzzy aggregation operators and their applications in multi-criteria decision-making with unknown weight information, 2024, 10, 24058440, e35942, 10.1016/j.heliyon.2024.e35942
    60. Tahir Mahmood, Kashif Hussain, Jabbar Ahmmad, Sana Shahab, Ubaid ur Rehman, Mohd Anjum, T-Bipolar soft groups and their fundamental laws, 2024, 46, 10641246, 9479, 10.3233/JIFS-236150
    61. Meiqin Wu, Sining Ma, Jianping Fan, A spherical Z-number multi-attribute group decision making model based on the prospect theory and GLDS method, 2024, 10, 2199-4536, 8501, 10.1007/s40747-024-01552-7
    62. Manivannan Balamurugan, Thukkaraman Ramesh, Anas Al-Masarwah, Kholood Alsager, A New Approach of Complex Fuzzy Ideals in BCK/BCI-Algebras, 2024, 12, 2227-7390, 1583, 10.3390/math12101583
    63. Despina Karamichailidou, Georgios Gerolymatos, Panagiotis Patrinos, Haralambos Sarimveis, Alex Alexandridis, Radial basis function neural network training using variable projection and fuzzy means, 2024, 36, 0941-0643, 21137, 10.1007/s00521-024-10274-3
    64. Nosheen Malik, Muhammad Shabir, Tareq M. Al-shami, Rizwan Gul, Murad Arar, M. Hosny, Rough bipolar fuzzy ideals in semigroups, 2023, 9, 2199-4536, 7197, 10.1007/s40747-023-01132-1
    65. Tareq M. Al-shami, Zanyar A. Ameen, Abdelwaheb Mhemdi, The connection between ordinary and soft σ-algebras with applications to information structures, 2023, 8, 2473-6988, 14850, 10.3934/math.2023759
    66. Muhammad Arshad, Muhammad Saeed, Atiqe Ur Rahman, Mazin Abed Mohammed, Karrar Hameed Abdulkareem, Abed Saif Alghawli, Mohammed A.A. Al-qaness, A robust algorithmic cum integrated approach of interval-valued fuzzy hypersoft set and OOPCS for real estate pursuit, 2023, 9, 2376-5992, e1423, 10.7717/peerj-cs.1423
    67. B. Jebapresitha, Hybrid structure of maximal ideals in near rings, 2024, 10, 2199-4536, 6467, 10.1007/s40747-024-01486-0
    68. Muhammad Akram, Urooj Fatima, José Carlos R. Alcantud, Group decision-making method based on Pythagorean fuzzy rough numbers, 2024, 1598-5865, 10.1007/s12190-024-02317-8
    69. Leticia Amador-Angulo, Oscar Castillo, Patricia Melin, Zong Woo Geem, Generalized Type-2 Fuzzy Approach for Parameter Adaptation in the Whale Optimization Algorithm, 2024, 12, 2227-7390, 4031, 10.3390/math12244031
    70. Minxia Luo, Jianlei Gao, Wenling Li, Some new construction methods of similarity measure on picture fuzzy sets, 2025, 1432-7643, 10.1007/s00500-025-10536-9
    71. Nenad Stojanović, Maja Laković, Ljubica Djurović, Decision-making algorithm based on the energy of interval-valued hesitant fuzzy soft sets, 2025, 0941-0643, 10.1007/s00521-025-11107-7
    72. Zeeshan Ali, Tapan Senapati, Sarbast Moslem, Selection of artificial intelligence tool for blind assistance based on Dombi aggregation operators for intuitionistic linguistic decision-making problems, 2025, 0975-6809, 10.1007/s13198-024-02683-3
    73. Jianping Fan, Zhuoyang He, Meiqin Wu, An Extended TODIM Approach Based on Regret Theory with Picture Fuzzy Sets for Green Suppliers Selection, 2025, 1562-2479, 10.1007/s40815-025-02026-9
    74. Xinyue Li, Using fuzzy decision support to create a positive mental health environment for preschoolers, 2025, 15, 2045-2322, 10.1038/s41598-025-96543-0
    75. Kang Zhou, Qingxiang Zhuang, On the Role and Mechanism of Anomalous Heat Generation From Low Energy Nuclear Reaction (LENR) During Earthquakes, 2025, 39, 2227-3123, 10.70923/001c.134018
    76. Waheed Ahmad Khan, Sagheer Abbas, Akhlaq Ahmed, Madhumangal Pal, Muhammad Asif, Muhammad Saeed Khan, Tareq Al-shami, Some novel concepts of interval-valued q-rung orthopair fuzzy graphs and computational framework of fuzzy air conditioning system, 2025, 20, 1932-6203, e0317676, 10.1371/journal.pone.0317676
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(7620) PDF downloads(1808) Cited by(14)

Figures and Tables

Figures(7)  /  Tables(1)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog