Life Cycle Assessment (LCA) was conducted in screening wrought aluminum from shredded automotive scrap using sorting technology. This technology comprises Pre-sorting, ECS (Eddy-current separation) sorting, and LIBS (Laser Induced Breakdown Spectroscopy) sorting, referred to as three-way sorting. Shredded automobile scrap contains wrought aluminum, cast aluminum, zinc, plastics, and other materials. Three-way sorting initially screens non-aluminum by Pre-sorting and ECS sorting, followed by LIBS sorting to separate wrought and cast aluminum. LCA showed that greenhouse gas (GHG) emissions to obtain wrought aluminum from the scrap were 0.168 kg-CO2 eq/kg. Further, GHG emissions decreased to －0.24 kg-CO2 eq/kg if reclaimed cast aluminum was reused and its GHG emissions were credited. Since GHG emissions of virgin aluminum were 9.93 kg-CO2 eq/kg, GHG emissions by three-way sorting were far below. In terms of cost, it was initially 259 JPY/kg to produce reclaimed wrought aluminum. However, under an improved scenario reflecting real manufacturing conditions, the study showed a potential to reduce its cost to 107 JPY/kg.
Citation: Kotaro Kawajiri, Michio Kobayashi, Shigeki Koyanaka. GHG impacts of an innovative separation process (three-way sorting process) for horizontal recycling of aluminum[J]. Clean Technologies and Recycling, 2025, 5(2): 161-177. doi: 10.3934/ctr.2025009
Life Cycle Assessment (LCA) was conducted in screening wrought aluminum from shredded automotive scrap using sorting technology. This technology comprises Pre-sorting, ECS (Eddy-current separation) sorting, and LIBS (Laser Induced Breakdown Spectroscopy) sorting, referred to as three-way sorting. Shredded automobile scrap contains wrought aluminum, cast aluminum, zinc, plastics, and other materials. Three-way sorting initially screens non-aluminum by Pre-sorting and ECS sorting, followed by LIBS sorting to separate wrought and cast aluminum. LCA showed that greenhouse gas (GHG) emissions to obtain wrought aluminum from the scrap were 0.168 kg-CO2 eq/kg. Further, GHG emissions decreased to －0.24 kg-CO2 eq/kg if reclaimed cast aluminum was reused and its GHG emissions were credited. Since GHG emissions of virgin aluminum were 9.93 kg-CO2 eq/kg, GHG emissions by three-way sorting were far below. In terms of cost, it was initially 259 JPY/kg to produce reclaimed wrought aluminum. However, under an improved scenario reflecting real manufacturing conditions, the study showed a potential to reduce its cost to 107 JPY/kg.
| [1] |
Cullen JM, Allwood JM (2013) Mapping the global flow of aluminum: From liquid aluminum to end-user goods. Environ Sci Technol 47: 3057–3064. https://doi.org/10.1021/es304256s doi: 10.1021/es304256s
|
| [2] | Kelly SM (2018) Recycling of passenger vehicles: A framework for upcycling and required enabling technologies. Worcestor Polytechnic Institute. |
| [3] | Bell S, Davis B, Javaid A, et al. (2003) Final Report on Scrap Management, Sorting, and Classification of Aluminum. Report No. 2003-22 (CF). https://doi.org/10.13140/RG.2.2.30171.98089 |
| [4] |
Modaresi R, Műller DB (2012) The role of automobiles for the future aluminum recycling. Environ Sci Technol 46: 8587–8594. https://doi.org/10.1021/es300648w doi: 10.1021/es300648w
|
| [5] | Kevorkijan V (2010) Advances in recycling of wrought aluminum alloys for added value maximiation. MJoM 16: 103–114. UDC: 669.14:621.791.037 |
| [6] |
Paraskevas D, Kellens K, Dewulf W, et al. (2015) Environmental modeling of aluminum recycling: A Life Cycle Assessment tool for sustainable metal management. J Clean Prod 105: 357–370. http://doi.org/10.1016/j.jclepro.2014.09.102 doi: 10.1016/j.jclepro.2014.09.102
|
| [7] |
Martinsen K, Gulbrandsen-Dahl S (2015) Use of post-consumer scrap in aluminum wrought alloy structural components for the transportation sector. Procedia CIRP 29: 686–691. https://doi.org/10.1016/j.procir.2015.02.072 doi: 10.1016/j.procir.2015.02.072
|
| [8] | Altenpohl DG, Paschen P (2001) Aluminium 77: P8–13. |
| [9] |
Das SK (2006) Material Science Forum 519–512: P1239. https://doi.org/10.4028/www.scientific.net/MSF.519-521.1239 doi: 10.4028/www.scientific.net/MSF.519-521.1239
|
| [10] | IDEA_v2.1.3 database (2017) Advanced Industry Science and Technology. |
| [11] | Bauer AJR, Laska C (2018) LIBS For Automated Aluminum Scrap Sorting. Available from: https://tsi.com/getmedia/b79aa0dd-35de-4bd5-9b6aaa4ea7cd096f/LIBS_Automated_Aluminum_Scrap_Sorting_LIBS-028-A4?ext=.pdf |
| [12] | NIKKEI XTECH (2020) News article: Recycled aluminum deployment to new bullet train. June 15 2020. Available from: https://xtech.nikkei.com/atcl/nxt/news/18/08130/ |
| [13] | Japan Aluminum Association (2019) A plan to realize low carbon profile in aluminum industry. Available from: https://www.aluminum.or.jp/railway_vehicle/meeting/17/files/17_03.pdf |
| [14] | European Aluminum (2020) Circular Aluminum Action Plan. A strategy for achieving aluminum full potential for circular economy by 2030. Available from: https://circulareconomy.europa.eu/platform/en/knowledge/circular-aluminium-action-plan-strategy-achieving-aluminiums-full-potential-circular-economy-2030#:~:text=The%20action%20plan%20aims%20to%20ensure%20that%20all,and%20to%20keep%20the%20material%20in%20active%20use |
| [15] | Bjørnbet MM (2014) Life Cycle Assessment of Body-in-White Produced from Recycled Aluminum. Norwegian University of Science and Technology. |
| [16] |
Eyndea SV, Hercka DV, Bracquenéa E, et al. (2024) Comparative life cycle assessment of aluminium scrap treatment strategies. Procedia CIRP 122: 1012–1017. https://doi.org/10.1016/j.procir.2024.01.136 doi: 10.1016/j.procir.2024.01.136
|
| [17] |
Rem PC, Leest PA, Akker AJ (1997) A model for eddy current separation. Int J Miner Process 49: 193–200. https://doi.org/10.1016/S0301-7516(96)00045-2 doi: 10.1016/S0301-7516(96)00045-2
|
| [18] |
Dholu N, Nagel RJ, Rajamani KR (2018) Eddy current separation of nonferrous metals using a various-frequency electromagnet. KONA Powder Part J 34: 241–247. https://doi.org/10.14356/kona.2017012 doi: 10.14356/kona.2017012
|
| [19] |
Gaustad G, Olivetti E, Kirchain R (2012) Improving aluminum recycling: A survey of sorting and impurity removal technologies. Resour Conserv Recycl 58: 79–87. https://doi.org/10.1016/j.resconrec.2011.10.010 doi: 10.1016/j.resconrec.2011.10.010
|
| [20] | Gesing A, Stewart C, Hopson G, et al. (2011) Separation of wrought fraction of aluminum recovered from automotive shredder scrap. New Orleans, LA. CA: TMS February 2001. |
| [21] | Alumobility (2022) Closing the Loop on Automotive Aluminum Scrap to Minimize Carbon Emissions. Alumobility White-Paper May 2022. Available from: https://alumobility.com/wp-content/uploads/2022/05/Alumobility_White-Paper_Closing-the-Loop-on-Automotive-Aluminum-Scrap-to-Minimize-Carbon-Emissions_May2022.pdf |
| [22] | Zorba Aluminium Scrap: A comprehensive guide. Accessed on September 8th, 2025. Available from: https://www.gme-recycling.com/zorba-aluminium-scrap-a-comprehensive-guide/ |
| [23] |
Kawajiri K, Kobayashi M, Murakami Y (2025) Cradle to Gate LCA analysis for wrought aluminum recycling process from high impurity content alloys with the fractional crystallization technology. Clean Technol Recycl 5: 112–126. https://doi.org/10.3934/ctr.2025006 doi: 10.3934/ctr.2025006
|
| [24] | UACJ. Aluminum lightens the world, Aluminum manufacturer LCA-UACJ's environment-related insights. Available from: https://www.uacj.co.jp/english/pdf/aluminum.pdf |
| [25] |
Gaustad G, Elsa OE, Kirchain R (2011) Improving aluminum recycling: A survey of sorting and impurity removal technologies. Resour Conserv Recycl 58: 79–87. https://doi.org/10.1016/j.resconrec.2011.10.010 doi: 10.1016/j.resconrec.2011.10.010
|
Figures(11) / Tables(3)
Kotaro Kawajiri, Michio Kobayashi, Shigeki Koyanaka. GHG impacts of an innovative separation process (three-way sorting process) for horizontal recycling of aluminum[J]. Clean Technologies and Recycling, 2025, 5(2): 161-177. doi: 10.3934/ctr.2025009
DownLoad: