Research article Special Issues

A study on the static behavior of functionally graded I-shaped beams

  • Received: 02 October 2023 Revised: 01 December 2023 Accepted: 07 December 2023 Published: 25 December 2023
  • Functionally graded materials are well-known for their ability to minimize abrupt stress transitions that are typical of laminated composites, as well as for being very suitable to operate in adverse high-temperature environments. They can act as thermal barriers if a proper selection of the constituent materials is considered. These materials and structures have attracted the attention of many researchers; however, previous research efforts have been focused on the systematic study of rectangular-shaped cross-section profiles. The use of beams characterized by other cross-sections, which are commonly used in metallic construction, may benefit from the continuous, smooth materials mixture that is typically found within functionally graded composites. Hence, this work aims to investigate the behavior of symmetrical, I-shaped, cross-section beams made from these advanced composites by performing a set of parametric analyses. These beams are modeled after solid finite elements to be able to describe the materials mixture evolution through the beam thickness with greater detail. Thick and moderately thick beams are submitted to static loading while considering different boundary conditions, and their linear static behavior is analyzed. As expected, the stress profiles are highly influenced by the materials' mixture profiles. Significant shear stress was found in the I-shaped cross sections.

    Citation: M.A.R. Loja, André Carvalho, Ines C.J. Barbosa. A study on the static behavior of functionally graded I-shaped beams[J]. AIMS Materials Science, 2024, 11(1): 28-57. doi: 10.3934/matersci.2024002

    Related Papers:

    [1] Boel De Paepe . A recipe for myositis: nuclear factor κB and nuclear factor of activated T-cells transcription factor pathways spiced up by cytokines. AIMS Allergy and Immunology, 2017, 1(1): 31-42. doi: 10.3934/Allergy.2017.1.31
    [2] Ling Wang, Shunbin Ning . “Toll-free” pathways for production of type I interferons. AIMS Allergy and Immunology, 2017, 1(3): 143-163. doi: 10.3934/Allergy.2017.3.143
    [3] Shancy Petsel Jacob, Chikkamenahalli Lakshminarayana Lakshmikanth, Thomas M. McIntyre, Gopal Kedihitlu Marathe . Platelet-activating factor and oxidized phosphatidylcholines do not suppress endotoxin-induced pro-inflammatory signaling among human myeloid and endothelial cells. AIMS Allergy and Immunology, 2017, 1(3): 108-123. doi: 10.3934/Allergy.2017.3.108
    [4] Ryuta Muromoto, Kenji Oritani, Tadashi Matsuda . IL-17 signaling is regulated through intrinsic stability control of mRNA during inflammation. AIMS Allergy and Immunology, 2022, 6(3): 188-199. doi: 10.3934/Allergy.2022014
    [5] Ken S. Rosenthal . Immune monitoring of the body’s borders. AIMS Allergy and Immunology, 2018, 2(3): 148-164. doi: 10.3934/Allergy.2018.3.148
    [6] Zinia Pervin, Anika Tasnim, Hasib Ahamed, Md Al Hasibuzzaman . Epigenetic regulation of the COVID-19 pathogenesis: its impact on the host immune response and disease progression. AIMS Allergy and Immunology, 2023, 7(1): 60-81. doi: 10.3934/Allergy.2023005
    [7] Djo Hasan . Purinergic P2X7R expressed on regulatory T cells potentially links molecular mimicry to autoimmune responses. AIMS Allergy and Immunology, 2024, 8(2): 80-123. doi: 10.3934/Allergy.2024006
    [8] Katarzyna Nazimek . The complex functions of microRNA-150 in allergy, autoimmunity and immune tolerance. AIMS Allergy and Immunology, 2021, 5(4): 195-221. doi: 10.3934/Allergy.2021016
    [9] Rosa Molfetta, Beatrice Zitti, Angela Santoni, Rossella Paolini . Ubiquitin and ubiquitin-like modifiers modulate NK cell-mediated recognition and killing of damaged cells. AIMS Allergy and Immunology, 2017, 1(4): 164-180. doi: 10.3934/Allergy.2017.4.164
    [10] Stefano Regis, Fabio Caliendo, Alessandra Dondero, Francesca Bellora, Beatrice Casu, Cristina Bottino, Roberta Castriconi . Main NK cell receptors and their ligands: regulation by microRNAs. AIMS Allergy and Immunology, 2018, 2(2): 98-112. doi: 10.3934/Allergy.2018.2.98
  • Functionally graded materials are well-known for their ability to minimize abrupt stress transitions that are typical of laminated composites, as well as for being very suitable to operate in adverse high-temperature environments. They can act as thermal barriers if a proper selection of the constituent materials is considered. These materials and structures have attracted the attention of many researchers; however, previous research efforts have been focused on the systematic study of rectangular-shaped cross-section profiles. The use of beams characterized by other cross-sections, which are commonly used in metallic construction, may benefit from the continuous, smooth materials mixture that is typically found within functionally graded composites. Hence, this work aims to investigate the behavior of symmetrical, I-shaped, cross-section beams made from these advanced composites by performing a set of parametric analyses. These beams are modeled after solid finite elements to be able to describe the materials mixture evolution through the beam thickness with greater detail. Thick and moderately thick beams are submitted to static loading while considering different boundary conditions, and their linear static behavior is analyzed. As expected, the stress profiles are highly influenced by the materials' mixture profiles. Significant shear stress was found in the I-shaped cross sections.



    1. Introduction

    Recent advances in genetic and environmental contributions to autoimmunity suggest that interaction between genetic elements and epigenetic changes caused by environmental agents may be responsible for inducing autoimmune diseases (ADs). Autoimmunity arises when immune responses mounted in the host are directed against self-components as a result of the loss of self-tolerance. ADs may be ether tissues-pecific where unique tissue-specific antigens are targeted, or systemic in which multiple tissues are affected and a variety of apparently ubiquitously expressed autoantigens are targeted [1,2] (Table 1). The affliction of autoimmunity is believed to develop when genetically predisposed individuals encounter environmental agents that trigger it. The environmental agents that are revered in this respect are stress and the viruses [3,4,5,6,7,8,9,10,11,12,13,14,15], which are operatives in this scene as stimuli for the activation of the nuclear factor (NF-KB), a transcription factor which specifically binds promoter DNA to activate target gene expression.

    Table 1. Examples of selected human autoimmune diseases (adapted from Ray S et al. [1]).
    Organ specific autoimmune diseases
    Organ Disease(s) Self-Antigen
    Adrenal cells Addison's disease Cytochrome P-450 antigens
    Red blood cells Autoimmune haemolitic anaemia Red blood cell membrane proteins
    Platelets Idiopathic thrombocytopaenic purpura Platelet antigens
    Stomach Pernicious anaemia Gastric parietal cell antigens
    Small bowel Coeliac sprue (gluten eneteropathy) Transglutaminase
    Thyroid Hashimoto's thyroiditis Grave's disease Thyroid cell antigens Thyroid-stimulating hormone receptor
    Muscle Myasthenia gravis Acetylcholine receptors
    Pancreatic islets Type 1 diabetes Beta cell antigens
    Hepatocytes Autoimmune hepatitis Hepatocyte antigens (cytochrome P-450 2D6)
    Bile duct cells Primary biliary cirrhosis Intra-hepatic bile duct
    Heart Rheumatic heart disease Myocardial antigens
    Kidney/lung Goodpasture's syndrome Basement membrane antigens
    Systematic autoimmune diseases
    Disease(s) Self-Antigen
    Ankylosing sponkylitis Vertebrae
    Multiple sclerosis Brain or white matter
    Rheumatoid arthritis Connective tissue, IgG
    Systemic lupus erythematosus DNA nuclear protein RBC and platelet membranes
    Scleroderma Nuclei, heart, lungs, gastrointestinal tract, kidney
    Sjogren's syndrome Salivary gland, liver, kidney, thyroid
     | Show Table
    DownLoad: CSV

    1.1. NF-ΚB

    The transcription factor NF-ΚB is involved in the regulation of a large number of genes that control various aspects of the immune and inflammatory responses. According to Zhu et al. [16], NF-ΚB is a family of structurally related transcription factors. In mammals the NF-ΚB family consists of five members: NF-ΚB1 (p105/50), NF-ΚB2 (p100/52), RelA (p65), RelB, and c-Rel. They all have a structurally conserved N-terminal 300-amino-acid Rel homology domain (RHD), which contains sequences responsible for dimerization, nuclear translocation and DNA binding. Only RelA, RelB and c-Rel have a transactivation domain, which is non-homologous and located at the C-termini of the proteins. The other two NF-ΚB proteins, NF-ΚB1 and NF-ΚB2, lack a transactivation domain but instead contain seven ankyrin repeats, a 33-amino-acid characteristic motif of the inhibitor of NF-ΚB, (IΚB), that mediates protein-protein interactions. The five NF-ΚB proteins above can form 15 transcription factors through homo-or hetero-dimerization [17]: the main activated forms being RelA: p50 and RelB: p52. These NF-ΚB family members play critical roles in a wide variety of biological processes, including immune and inflammatory responses, development, cell growth and apoptosis. In unstimulated cells, the NF-ΚB dimers are sequestered in the cytoplasm by a family of inhibitors called IΚBs (IΚBα, IΚBβ, IΚBε and IΚBγ, IΚBδ, IΚBζ and Bcl-3), which are proteins that contain multiple copies of the sequence ankyrin repeats. By virtue of their ankyrin repeat domains, the IΚB proteins mask the nuclear localization signals of NF-ΚB proteins and keep them sequestered in an inactive state in the cytoplasm [18]. The NF-ΚB dimer becomes activated through degradation of the IΚB following phosphorylation of specific serines in the IΚB proteins by the IΚB-kinase complex (IKK), leading to their ubiquitination and thus allowing the liberation and nuclear translocation of NF-ΚB dimers to induce gene expression.


    1.2. Activation of NF-ΚB

    The NF-ΚB is recognized as a master transcription factor that responds to diverse stimuli by activating the expression of stress-response genes. Multiple signals, including cytokines, growth factors, engagement of the T cell receptor, bacterial and viral products, various forms of radiation and the oxidative stress, induce NF-ΚB transcriptional activity [19,20,21]. We are particularly interested in, and will limit ourselves to, the mechanism by which NF-ΚB is activated by oxidative stress and the viruses, the latter being represented by the gamma herpesviruses KSHV and EBV.


    1.2.1. Oxidative stress-activation of NF-ΚB

    In respiring cells, a small amount of consumed oxygen is reduced in a specific way, yielding a variety of highly reactive chemical entities collectively called reactive oxygen species (ROS) or reactive oxidative intermediates (ROIs) and include hydrogen peroxide (H2O2), nitric oxide radical (NO), superoxide anion (O2) and hydroxyl radical (OH). A state of moderately increased levels of intracellular ROS is referred to as cellular oxidative stress [19,22]. Oxidative stress is caused by an imbalance between the production of oxidants and/or decreased ability to detoxify those oxidants. ROS activate NF-ΚB by various mechanisms [23,24]. Studies have been made which suggest that IΚBα phosphorylation and degradation might be the step that is responsive to oxidative stress. NF-ΚB activation has been suggested to be regulated by the levels of oxidants inside cells [22]. Thus it is observed that H2O2, a ROS, regulates NF-ΚB activation through alternative phosphorylation of IΚBα. While typically IΚBα is usually phosphorylated on serines 32 and 36, which leads to its ubiquitination and degradation, ROS H2O2 affects the phosphorylation of IΚBα on tyrosine Tyr42 or other tyrosine residues, and IΚBα may or may not be degraded as part of the process [25,26,27,28,29]. IKK is not required in this case, and IΚBα phosphorylation may be mediated by kasein Kinase II as well as a tyrosine kinase. Degradation of IΚBα may not be necessary in this case because Tyr42-phosphorylated IΚBα is bound by the SH2 domains of p85α regulatory subunit of PI3K, thus unmasking NF-ΚB and allowing it to translocate to the nucleus [30,31,32]. PI3K as well as c-Src have been implicated in alternative phosphorylation of IΚBα.


    1.2.2. Viral activation of NF-ΚB, installment of viral latency

    NF-ΚB activation is imperative for latent infection of gamma herpesviruses. KSHV infection activates IKKβ and IKKε to enable host NF-ΚB activation and KSHV latent infection. Biochemical and genetic experiments identified RelA as a key player downstream of IKKβ and IKKε, i.e., IKKβ and IKKε were essential for phosphorylation of serines S536 and S468 of RelA, respectively [33]. That the expression of the phosphorylation-resistant RelAS536A increased KSHV lytic genes expression and impaired latent infection is further seen as completing evidence. NF-ΚB activation is coordinated by IKKβ and IKKε, which sequentially phosphorylate RelA in a site-specific manner to enable latent infection after KSHV de novo infection. As a further evidential support, knockdown of IKKβ and IKKε impairs NF-ΚB activation and elevates KSHV lytic genes expression resulting in abrogation of the latent infection. Please recall here that RelA is one of the five members of NF-ΚB family that is the most abundantly and ubiquitously expressed and is the transcriptionally active subunit of the predominant RelA: p50 dimer. Post translational modifications of the RelA subunit, e.g., phosphorylation and acetylation, are important means to regulate NF-ΚB-dependent gene expression [34,35,36,37]. Activation of NF-ΚB through viral infection results in the transactivation of the NF-ΚB sitec-ontaining viral promoter, resulting in installment of latency [38].


    1.3. Viral latency

    In latent infection, the full viral genome is retained in the host, but its expression is dramatically restricted, such that few viral antigens and no viral particles are produced. To qualify as latency, this cryptic form of infection must display two additional properties: persistence and reversibility, i.e., the capacity of the genome, under the appropriate circumstances (e.g., oxidative stress) to be fully reactivated with the production of infectious progeny, (the lytic replication), is the key requirement of latency. It is the property of reversibility that allows latent infections to avoid abortive infection, or a dead end, and instead become an effective mechanism of viral persistence. Efficient establishment of latency allows the viral genome to persist despite the host immune responses to many viral antigens, and in the face of other potentially adverse signals in the microenvironment. When environmental conditions warrant, appropriate signals can trigger the full repertoire of viral gene expression, allowing viral production and spread to resume.


    1.3.1. Maintenance of latency

    The herpesviruses, alpha, beta and gamma subfamilies are the viruses capable of true latency as described above. In fact all herpesviruses share a propensity to establish latent infection [39,40]. The herpesviruses HBV and KSHV encode multiple viral miRNAs which mimic cellular miRNAs and modulate cellular and viral gene expression [41,42,43,44]. Some of the viral miRNAs have been implicated in maintaining latent infection and altering the balance between latent/lytic infection [45,46]. The first study showing that miRNAs can be encoded in the viral genome was published in 2004 [47]. The unique ability of the herpesviruses to establish long term latent infections means that these viruses need to block protective host innate or adaptive immune responses over the long term while minimizing the expression of potentially antigenic viral proteins, and this is accomplished by the viral miRNAs. Employing quantitative algorithms prediction, the authors, Grey et al. and Lu et al. [48,49] determined that the herpesviruses employ viral miRNAs to suppress expression of their own genes, including their immediate early genes. These authors concluded that these viruses use viral miRNAs-mediated suppression of immediate early genes as part of their strategy to enter and maintain latency. The lytic cascade is reinitiated with the expression of the immediate early genes (RTA, BZLF1 and BRLF1). Multiple viral miRNAs are transcribed during latency. The KSHV encoded miRNAs (miR-K12-9-5p and miR-12-7-5p) have been shown to directly regulate and inhibit the transcription of the master lytic switch protein, the viral immediate early gene known as the replication and transcription activator (RTA), and in this way they contribute to the maintenance of viral latency. They target the expression of RTA at the translational level [50,51,52]. Fang Lu et al. observed that EBV-coded miR-155 attenuates NF-ΚB signaling and stabilizes latent virus persistence [41]. miRNA-155 is important for the stable maintenance of EBV genomes during latent infection. Several latency genes have been observed to influence the activation of NF-ΚB which turns out to be important in the maintenance of latency. EBV encoded latency membrane protein 1 (LMP1) is a potent activator of NF-ΚB signaling pathways and is essential for EBV immortalization of B lymphocytes. Finally, the observations by Lei et al. [53] established that the viral activation of NF-ΚB is essential for the establishment of latency.


    1.3.2. Abrogation of latency (the activation of the lytic, replicative phase of infection)

    EBV lytic genes are expressed in a temporally regulated cascade. Following the activation, transcription and expression of the lytic master switch RTA, the switch from the latent to the replicative form of EBV infection is mediated by the two immediate early proteins BZLF1 and BRLF1, which are transcription factors that together activate the entire lytic viral cascade of gene expression, ultimately resulting in the production of infectious viral particles [54]. In natural viral life cycle, the differentiation of the cells triggers the abrogation of latency and entrance into the lytic phase of infection. In the situations leading to virus-induced autoimmunity, however, it is cellular stress, in particular for our purpose, oxidative stress that triggers latency termination [5].


    2. The Hypothesis

    The switch between latency and lytic replication is regulated by epigenetic factors: (ⅰ) hypomethylation of the promoter of replication and transcription activator, RTA (which, as said above, is essential for the lytic switch) leads to viral reactivation; (ⅱ) histone acetylation induces viral replication by influencing protein-protein associations and transcription factor binding [55]; and (ⅲ) it is the general and established situation that post-transcriptional gene regulation of mRNA turnover and translation is mediated by microRNAs and RNA-binding proteins in events identified as network motifs [56,57,58,59,60]. The network motifs in the images of feedback and feed-forward mechanisms or loops [61] are defined as small gene regulating circuits that occur more often than can be expected by chance. Feed-back motifs are prominent throughout biology: they can be identified when protein-protein interactions are combined with transcriptional interactions [62] or when transcriptional interactions and miRNA-mediated post-transcriptional interactions are involved. We hypothesize that this latter scenario and mode of feedback motif occurs with stress-activated NF-ΚB (a transcription factor) and viral miRNAs: the ensemble being depicted as NF-ΚB <--> miRNA, signifying a reciprocal regulation between the viral miRNA and NF-ΚB in which NF-ΚB regulates viral miRNA and is itself regulated by the same miRNA. NF-ΚB gets directly involved in up-regulation and down-regulation of miRNAs [63]. We suggest that the relationship above induces a down-regulation of the viral miRNA with the consequence that the viral miRNA gets sequestered (titrated out) and neutralized by the RTA site with which it interacts through a process termed "sponging". Equally interacting with the RTA site is the stress-activated NF-ΚB. But the down-regulation of the viral miRNA by NF-ΚB in the feed-back circuit (formula) above accentuates the viral miRNA sponging, making it (the viral miRNA) no longer in excess but reduced to below some minimal proportionate value. This frees the RTA site for the transcription factor NF-ΚB interaction and it results in the activation and transcription of RTA: we say this event spells switching on of the master lytic switch, if you will!

    In the situation of feed-forward circuitry, a regulator X regulates the expression of a target Z via a direct or indirect path through a regulator Y, the whole setting represented as X/Z/Y, which in our particular case is translated as "stress-activated NF-ΚB/RTA/viral miRNA". This feed-forward loop reveals a mechanism through which stress-activated NF-ΚB simultaneously activates RTA transcription and limits its translation through activation of the viral miRNA.

    In summary, NF-ΚB is unusually activated: its viral activation via serine residues phosphorylation by IKKβ and IKKε leads to viral latency, while activation by oxidative stress (ROS) occurs via tyrosine phosphorylation of IΚBα which then complexes with NF-ΚB and leads to abrogation of the viral latency. To facilitate understanding of the above we abbreviate that "viral activation of NF-ΚB leads to viral latency; while stress activation of the same molecular entity, the NF-ΚB, leads instead to abrogation of the latency". Thus NF-ΚB emerges as the converging focus between stress and the viruses in their efforts as separate environmental agents that trigger autoimmunity. The phosphorylation of particular amino acid residues of a protein molecule modulates that protein's polymorphic conformations, appropriately. For a transcription factor, TF, a given conformation influences its choice of cognate DNA sequence recognition as well as its interaction with a neighboring TF or other proteins and molecules. The transcription factor, NF-ΚB, in particular is reputed to be involved in a battery of regulatory functions [23,64]. We interpret this to mean that as a TF that is variously and differentially phosphorylated, NF-ΚB is capable of assuming or exhibiting a multitude of polymorphic conformations that we choose to call them "derivative isoforms". Thus the virus activation of NF-ΚB that occurs via its phosphorylation by IKKβ and IKKε at serines S536 and S468 generates the derivative isoforms with the potential to activate the transcription of viral latency genes thereby installing and maintaining a latent infection. On the other hand oxidative stress-activation of NF-ΚB occurs via complexation with IΚBα that is phosphorylated at tyrosine Tyr42 and yields derivative isoforms with the attributes that activate the transcription of RTA, the master lytic switch, thereby precipitating abrogation of the viral latency and engendering the lytic cycle phase. The above two alternative involvements of NF-ΚB portray its versatility and sophistication and confirms the difference in mechanism between viral-and stress-activations of NF-ΚB. The revelation of the feedback and feedforward network motifs cited above represents evidence of regulatory circuits involving stress-activated NF-ΚB and viral miRNAs: the feedback mechanism co-accomplishes with the feed-forward loop, in a relation possibly reverberative of a cooperativity, the expression and switching on of RTA, the master lytic switch. This expressed RTA in turn activates the transcription of the immediate early genes BZLF1 and BRLF1: the two transcription factors that mobilize the expression of the whole set of lytic genes, resulting in the procreation of the lytic cascade. Interpret this simply as the activation of NF-ΚB by stress materializes in a dual prong: feedback and feedforward loops that cooperate in the switching on of RTA and thus abrogate the viral latency, consequentially setting in trend or motion the journey of the virus to the triggering of autoimmunity (Figure 1) [65].

    Figure 1. The cooperativity between feedback and feed-forward network motifs in the abrogation of the viral latent infection leading to viruses being agents that trigger autoimmunity.

    Take-home Messages

    (1) In man, autoimmunity is an event in which the immune responses mounted in the host are directed against self-components as a result of the loss of self-tolerance. The resulting autoimmune diseases are either tissue-specific when a particular tissue is affected, or systemic when a number of tissues are enrolled.

    (2) To happen, autoimmunity requires triggering by environmental factors: the viruses and oxidative stress, in genetically primed individuals. The viruses and stress feature as stimuli for the activation of the transcription factor NF-ΚB.

    (3) Post-transcriptional gene regulation of mRNA turnover and translation is mediated by microRNAs and RNA-binding proteins in events identified as network motifs, in the images of feedback and feed-forward mechanisms. The feedback network motif in which transcriptional interactions and miRNA-mediated post-transcriptional interactions are involved occurs with stress-activated NF-ΚB and viral miRNAs in a reciprocal regulation between NF-ΚB and viral miRNAs such that NF-ΚB regulates the viral miRNAs and is itself regulated by the same miRNAs.

    (4) NF-ΚB and viral miRNAs compete for RTA site with which they interact. The NF-ΚB regulation of miRNA above is a down-regulation that consequents in miRNA depletion by RTA site in a process called sponging, thus sparing the RTA site for NF-ΚB; this scenario favors NF-ΚB-activated transcription and expression of RTA, the lytic master switch, leading to abrogation of the viral latency and to a lytic replication.

    (5) The feed-forward network motif reveals a mechanism through which stress-activated NF-ΚB simultaneously activates RTA transcription and limits its translation through activation of the viral miRNA.

    (6) Finally, as Figure 1 displays, the feedback and feed-forward mechanisms cooperate in the switching on of RTA which in turn activates the transcription and expression of the immediate early genes BZLF1 and BRLF1. These two immediate early genes mobilize the expression of lytic genes and thus abrogate the viral latency, consequentially setting in trend the journey of the virus to the triggering of autoimmunity.


    Acknowledgments

    This investigation was supported by grants from the NSW Health Department. The author would like to thank Professor Schlink for providing the facilities for the investigation. Dr Temajo is particularly grateful to his wife Julianne Temajo for her enlightening suggestions in their learned and civilized discourse.


    Conflict of Interest

    All authors declare no conflicts of interest in this review.




    [1] Koizumi M (1997) FGM activities in Japan. Compos B Eng 28: 1–4. https://doi.org/10.1016/S1359-8368(96)00016-9 doi: 10.1016/S1359-8368(96)00016-9
    [2] Sayyad AS, Ghugal YM (2019) Modeling and analysis of functionally graded sandwich beams: a review. Mech Adv Mater Struct 26: 1776–1795. https://doi.org/10.1080/15376494.2018.1447178 doi: 10.1080/15376494.2018.1447178
    [3] Saleh B, Jiang J, Fathi R, et al. (2020) 30 years of functionally graded materials: An overview of manufacturing methods, applications and future challenges. Compos B Eng 201: 108376. https://doi.org/10.1016/j.compositesb.2020.108376 doi: 10.1016/j.compositesb.2020.108376
    [4] Garg A, Belarbi MO, Chalak H, et al. (2021) A review of the analysis of sandwich fgm structures. Compos Struct 258: 113427. https://doi.org/10.1016/j.compstruct.2020.113427 doi: 10.1016/j.compstruct.2020.113427
    [5] Parihar RS, Setti SG, Sahu RK (2018) Recent advances in the manufacturing processes of functionally graded materials: A review. IEEE J Sel Top Quantum Electron 25: 309–336. https://doi.org/10.1515/secm-2015-0395 doi: 10.1515/secm-2015-0395
    [6] Kanu NJ, Vates UK, Singh GK, et al. (2019) Fracture problems, vibration, buckling, and bending analyses of functionally graded materials: A state-of-the-art review including smart FGMS. Part Sci Technol 37: 583–608. https://doi.org/10.1080/02726351.2017.1410265 doi: 10.1080/02726351.2017.1410265
    [7] Banks-Sills L, Eliasi R, Berlin Y (2002) Modeling of functionally graded materials in dynamic analyses. Compos B Eng 33: 7–15. https://doi.org/10.1016/S1359-8368(01)00057-9 doi: 10.1016/S1359-8368(01)00057-9
    [8] Kasem MM, Maalawi KY (2021) Multiobjective optimization of functionally graded material columns. 2021 3rd Novel Intelligent and Leading Emerging Sciences Conference (NILES) 323–326. https://doi.org/10.1109/NILES53778.2021.9600498
    [9] Dastjerdi FB, Jabbari M (2022) Analytical analysis for non-homogeneous two-layer functionally graded material. Nonlinear Eng 11: 598–608. https://doi.org/10.1515/nleng-2022-0258 doi: 10.1515/nleng-2022-0258
    [10] He D, Wang Q, Zhong R, et al. (2023) Vibration analysis of functionally graded material (FGM) double layered floating raft structure by the spectro-geometric method. Struct 48: 533–550. https://doi.org/10.1016/j.istruc.2022.11.111 doi: 10.1016/j.istruc.2022.11.111
    [11] Nguyen TT, Kim NI, Lee J (2016) Analysis of thin-walled open-section beams with functionally graded materials. Compos Struct 138: 75–83. https://doi.org/10.1016/j.compstruct.2015.11.052 doi: 10.1016/j.compstruct.2015.11.052
    [12] Loja MA, Barbosa JI (2020) In-plane functionally graded plates: A study on the free vibration and dynamic instability behaviours. Compos Struct 237: 4. https://doi.org/10.1016/j.compstruct.2020.111905 doi: 10.1016/j.compstruct.2020.111905
    [13] Asiri S (2022) Comparative modal analysis on fishing rod made of functionally graded composite material using finite element analysis. J Appl Biomater Funct Mater 20: 3. https://doi.org/10.1177/22808000221089774 doi: 10.1177/22808000221089774
    [14] Filippi M, Carrera E, Zenkour AM (2015) Static analyses of FGM beams by various theories and finite elements. Compos B Eng 72: 1–9. doi: 10.1016/j.compositesb.2014.12.004 doi: 10.1016/j.compositesb.2014.12.004
    [15] Chakraborty A, Gopalakrishnan S, Reddy JN (2003) A new beam finite element for the analysis of functionally graded materials. Int J Mech Sci 45: 519–539. https://doi.org/10.1016/S0020-7403(03)00058-4 doi: 10.1016/S0020-7403(03)00058-4
    [16] Yoon K, Lee P. S, Kim DN (2015) Geometrically nonlinear finite element analysis of functionally graded 3D beams considering warping effects. Compos Struct 132: 1231–1247. https://doi.org/10.1016/j.compstruct.2015.07.024 doi: 10.1016/j.compstruct.2015.07.024
    [17] Costa DM, Loja MA (2017) Bat-inspired optimization of multilayered adaptive structures. Compos Struct 168: 189–215. https://doi.org/10.1016/j.compstruct.2017.01.067 doi: 10.1016/j.compstruct.2017.01.067
    [18] Vallejos A, Ayala S, Arciniega R (2020) Improved first order formulation for buckling analysis of functionally graded beams. 2020 Congreso Internacional de Innovación y Tendencias en Ingeniería (CONⅡTI) 1–6. https://doi.org/10.1109/CONⅡTI51147.2020.9240368
    [19] Bian PL, Qing H, Yu T (2022) A new finite element method framework for axially functionally-graded nanobeam with stress-driven two-phase nonlocal integral model. Compos Struct 295: 9. https://doi.org/10.1016/j.compstruct.2022.115769 doi: 10.1016/j.compstruct.2022.115769
    [20] Mota AF, Loja MA, Barbosa JI, er al. (2022) Mechanical behavior of a sandwich plate with aluminum foam core, using an image-based layerwise model. Mech Adv Mater Struct 29: 4074–4095. https://doi.org/10.1080/15376494.2021.1919801 doi: 10.1080/15376494.2021.1919801
    [21] Luo Y (2023) Voxel-based design and characterization of functionally graded materials. Results Mater 17: 3. https://doi.org/10.1016/j.rinma.2023.100375 doi: 10.1016/j.rinma.2023.100375
    [22] Luu NG, Banh TT (2023) Static, dynamic and stability analysis of multi-dimensional functional graded plate with variable thickness using deep neural network. Tech Rep https://doi.org/10.48550/arXiv.2301.05900
    [23] Penna R, Feo L, Lovisi G, et al. (2022) Application of the higher-order hamilton approach to the nonlinear free vibrations analysis of porous fg nano-beams in a hygrothermal environment based on a local/nonlocal stress gradient model of elasticity. Nanomater 12: 2098. https://doi.org/10.3390/nano12122098 doi: 10.3390/nano12122098
    [24] Penna R (2023) Bending analysis of functionally graded nanobeams based on stress-driven nonlocal model incorporating surface energy effects. Int J Eng Sci 189: 103887. https://doi.org/10.1016/j.ijengsci.2023.103887 doi: 10.1016/j.ijengsci.2023.103887
    [25] Lovisi G (2023) Application of the surface stress-driven nonlocal theory of elasticity for the study of the bending response of fg cracked nanobeams. Compos Struct 324: 117549. https://doi.org/10.1016/j.compstruct.2023.117549 doi: 10.1016/j.compstruct.2023.117549
    [26] Loja M, Rzeszut K, Barbosa J (2022) Nonlocal free vibrations of metallic fgm beams. J Compos Sci 6: 125. https://doi.org/10.3390/jcs6050125 doi: 10.3390/jcs6050125
    [27] Giunta G, Crisafulli D, Belouettar S, et al. (2013) A thermo-mechanical analysis of functionally graded beams via hierarchical modelling. Compos Struct 95: 676–690. https://doi.org/10.1016/j.compstruct.2012.08.013 doi: 10.1016/j.compstruct.2012.08.013
    [28] Qin Y, Li X, Yang E, et al. (2016) Flapwise free vibration characteristics of a rotating composite thin-walled beam under aerodynamic force and hygrothermal environment. Compos Struct 153: 490–503. https://doi.org/10.1016/j.compstruct.2016.06.057 doi: 10.1016/j.compstruct.2016.06.057
    [29] Valencia Murillo C, Gutierrez Rivera M, Celaya Garcia L (2023) Thermal–structural linear static analysis of functionally graded beams using reddy beam theory. Math Comput Appl 28: 84. https://doi.org/10.3390/mca28040084 doi: 10.3390/mca28040084
    [30] Tian J, Zhang Z, Hongxing H (2019) Free vibration analysis of rotating functionally graded double-tapered beam including porosities. Int J Mech Sci 150: 526–538. https://doi.org/10.1016/j.ijmecsci.2018.10.056 doi: 10.1016/j.ijmecsci.2018.10.056
    [31] Mota A, Loja M, Barbosa J, et al. (2020) Porous functionally graded plates: an assessment of shear correction factor influence on static behavior. Math Comput Appl 25: 25. https://doi.org/10.3390/mca25020025 doi: 10.3390/mca25020025
    [32] Akbas D, Fageehi Y, Assie A, et al. (2022) Dynamic analysis of viscoelastic functionally graded porous thick beams under pulse load. Eng Comput 38: 365–377. https://doi.org/10.1007/s00366-020-01070-3 doi: 10.1007/s00366-020-01070-3
    [33] Lee J, Lee B (2022) Coupled flexural-torsional free vibration of an axially functionally graded circular curved beam. Mech Compos Mater 57: 833–846. https://doi.org/10.1007/s11029-022-10003-8. doi: 10.1007/s11029-022-10003-8
    [34] Ö zmen U, Ö zhan B (2022) Computational modeling of functionally graded beams: A novel approach. J Vib Eng Technol 10: 2693–2701. https://doi.org/10.1007/s42417-022-00515-x doi: 10.1007/s42417-022-00515-x
    [35] Li Z, Xu Y, Huang D (2021) Analytical solution for vibration of functionally graded beams with variable cross-sections resting on pasternak elastic foundations. Int J Mech Sci 191: 106084. https://doi.org/10.1016/j.ijmecsci.2020.106084 doi: 10.1016/j.ijmecsci.2020.106084
    [36] Gaspar J, Loja M, Barbosa J (2023) Static and free vibration analyses of functionally graded plane structures. J compos sci 7: 377. https://doi.org/10.3390/jcs7090377 doi: 10.3390/jcs7090377
    [37] Loja MR, Barbosa J, Soares CM (1997) Buckling behaviour of laminated beam structures using a higher order discrete model. Compos Struct 38: 119–131. https://doi.org/10.1016/S0263-8223(98)80011-1 doi: 10.1016/S0263-8223(98)80011-1
    [38] Carvalho A, Silva T, Loja M, et al. (2017) Assessing the influence of material and geometrical uncertainty on the mechanical behavior of functionally graded material plates. Mech Adv Mater Struct 24: 417–426. https://doi.org/10.1080/15376494.2016.1191100 doi: 10.1080/15376494.2016.1191100
    [39] Reddy JN (2003) Mechanics of Laminated Composite Plates and Shells, 2 Eds., CRC Press, Boca Raton.
    [40] Carvalho A (2023) Study of damping of bare and encased steel I-Beams using the thermoelastic model. Buildings 13: 2964. https://doi.org/10.3390/buildings13122964 doi: 10.3390/buildings13122964
    [41] Dassault Systèmes (2021) Solidworks. Available from: https://www.solidworks.com/.
    [42] Martha L (2018) Ftool-two-dimensional frame analysis tool. Available from: https://www.ftool.com.br/Ftool/.
  • Reader Comments
  • © 2024 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(1696) PDF downloads(141) Cited by(0)

Article outline

Figures and Tables

Figures(13)  /  Tables(11)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog