
The physical and mechanical properties of graphene-reinforced epoxy (epoxy/graphene) in hygrothermal environment need to be comprehensively understood. This is because it is necessary to predict the durability of epoxy/graphene when epoxy/graphene is used in an aggressive environment with high humidity and high temperature. Based on the molecular dynamics method, the influences of water content (2, 4 and 6%) and temperature (298,333 and 368 K) on the physical and tensile properties of epoxy/graphene were studied in this research. The results showed that after the addition of graphene, the free volume fraction of epoxy and the diffusion coefficient of water molecules in the epoxy decreased, and the density, tensile strength and deformation performance of epoxy increased. In the hygrothermal environment, the tensile strength degradation rate of epoxy/graphene was lower than that of pure epoxy. The failure mechanism and mechanical response of epoxy/graphene during the tensile process in the nanoscale were revealed. The research results provide a reference for the design and performance optimization of epoxy/graphene composites in a hygrothermal environment.
Citation: Xiuli Zhang, Guangming He, Hui Yao, Xuanxi Wang, Guoru Ma, Junliang Li, Zulong Yu, Guozhong Lu, Zhifei Gao. Effect of graphene on the properties of epoxy in hygrothermal environment by molecular dynamics method[J]. Electronic Research Archive, 2023, 31(6): 3510-3533. doi: 10.3934/era.2023178
[1] | Massimiliano Caramia, Giovanni Storchi . Evaluating the effects of parking price and location in multi-modal transportation networks. Networks and Heterogeneous Media, 2006, 1(3): 441-465. doi: 10.3934/nhm.2006.1.441 |
[2] | Jean-Pierre de la Croix, Magnus Egerstedt . Analyzing human-swarm interactions using control Lyapunov functions and optimal control. Networks and Heterogeneous Media, 2015, 10(3): 609-630. doi: 10.3934/nhm.2015.10.609 |
[3] | Yaojun Liu, Li Jia, Ping Wang, Xiaolin Song . Joint optimization of location and allocation for spare parts depots under (r,Q) inventory policy. Networks and Heterogeneous Media, 2024, 19(3): 1038-1057. doi: 10.3934/nhm.20240046 |
[4] | Giuseppe Buttazzo, Filippo Santambrogio . Asymptotical compliance optimization for connected networks. Networks and Heterogeneous Media, 2007, 2(4): 761-777. doi: 10.3934/nhm.2007.2.761 |
[5] | Santiago Moral, Victor Chapela, Regino Criado, Ángel Pérez, Miguel Romance . Efficient algorithms for estimating loss of information in a complex network: Applications to intentional risk analysis. Networks and Heterogeneous Media, 2015, 10(1): 195-208. doi: 10.3934/nhm.2015.10.195 |
[6] | Yacine Chitour, Frédéric Grognard, Georges Bastin . Equilibria and stability analysis of a branched metabolic network with feedback inhibition. Networks and Heterogeneous Media, 2006, 1(1): 219-239. doi: 10.3934/nhm.2006.1.219 |
[7] | Wenkai Liu, Yang Liu, Hong Li, Yining Yang . Multi-output physics-informed neural network for one- and two-dimensional nonlinear time distributed-order models. Networks and Heterogeneous Media, 2023, 18(4): 1899-1918. doi: 10.3934/nhm.2023080 |
[8] | Changli Yuan, Mojdeh Delshad, Mary F. Wheeler . Modeling multiphase non-Newtonian polymer flow in IPARS parallel framework. Networks and Heterogeneous Media, 2010, 5(3): 583-602. doi: 10.3934/nhm.2010.5.583 |
[9] | Xavier Litrico, Vincent Fromion . Modal decomposition of linearized open channel flow. Networks and Heterogeneous Media, 2009, 4(2): 325-357. doi: 10.3934/nhm.2009.4.325 |
[10] | Martin Gugat, Alexander Keimer, Günter Leugering, Zhiqiang Wang . Analysis of a system of nonlocal conservation laws for multi-commodity flow on networks. Networks and Heterogeneous Media, 2015, 10(4): 749-785. doi: 10.3934/nhm.2015.10.749 |
The physical and mechanical properties of graphene-reinforced epoxy (epoxy/graphene) in hygrothermal environment need to be comprehensively understood. This is because it is necessary to predict the durability of epoxy/graphene when epoxy/graphene is used in an aggressive environment with high humidity and high temperature. Based on the molecular dynamics method, the influences of water content (2, 4 and 6%) and temperature (298,333 and 368 K) on the physical and tensile properties of epoxy/graphene were studied in this research. The results showed that after the addition of graphene, the free volume fraction of epoxy and the diffusion coefficient of water molecules in the epoxy decreased, and the density, tensile strength and deformation performance of epoxy increased. In the hygrothermal environment, the tensile strength degradation rate of epoxy/graphene was lower than that of pure epoxy. The failure mechanism and mechanical response of epoxy/graphene during the tensile process in the nanoscale were revealed. The research results provide a reference for the design and performance optimization of epoxy/graphene composites in a hygrothermal environment.
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused a high number of severe cases and deaths across the world. Frontline healthcare workers, among others, have been an obvious inclusion as a high-risk group, frequently contributing to propagating transmission, because their work requires continued patient-facing roles including unavoidable exposure to infected patients for the purpose of professional care [1]. Before vaccinations became available, many countries tried to protect healthcare workers from infection by procuring personal protective equipment to minimize the risk of nosocomial transmission [1]. Other populations of particular concern have been elderly individuals and people with underlying health conditions, because they are at high risk of having a more serious course of infection [2]. This partly explains why care homes, where typically vulnerable older adults reside, have disproportionately experienced large outbreaks [3,4]. On average, care home residents accounted for more than 45% of deaths related to coronavirus disease (COVID-19) in 21 countries before the advent of vaccination [5].
In December 2020, COVID-19 vaccination commenced globally. Many countries began their vaccine rollouts with healthcare workers, the elderly, and residents of care homes taking first priority [6,7,8]. Among the approved vaccines, the Pfizer/BioNTech messenger RNA (mRNA) vaccine BNT162b2 showed a particularly high efficacy during a clinical trial [9], becoming one of the most widely used vaccines in Israel, the United Kingdom, and the United States, among others [6,7,10]. As countries implemented their vaccine rollouts, the direct effect of vaccination (i.e., protection against infection or disease, conferred by vaccination) was demonstrated to be high among various study populations including older people and healthcare workers [6,7,10,11,12]. Moreover, an indirect effect of vaccination, i.e., reduced risk of infection among unvaccinated individuals due to reduced opportunities for infection, was also suggested by household studies and others [13,14,15,16,17].
As in other countries, Japan also struggled to meet the challenges of mitigating the impact of the COVID-19 pandemic and implementing various public health interventions [18,19]. In Japan, a cluster is defined (in the not-legally binding notification rules of Ministry of Health, Labour and Welfare (MHLW)) as five or more confirmed COVID-19 cases that occur at the same place (excluding households) with clear epidemiologic links [18]. During the initial phase of the epidemic, healthcare facilities (such as hospitals) and care facilities (such as nursing homes) were reported to account for approximately half of the incidence of clusters, with each one sometimes involving more than 100 cases [19]. Considering that healthcare and elderly care facilities act as critical source of fatalities for COVID-19, especially in the super-aged nation Japan, it is vital to prevent the emergence of clusters [20]. Regarding the epidemic situation, as of 7 October 2021, Japan has experienced five major waves of COVID-19 cases [21]. During the fourth wave, from around April to June 2021 [21], the proportion of cases infected with the B.1.1.7 variant increased rapidly from March to April 2021, and this variant was estimated to become the dominant SARS-CoV-2 strain by the middle of May 2021 [22].
Japan's vaccine rollout began on February 17, 2021, and healthcare workers were prioritized as the first group to be vaccinated, as they were considered to be at a higher risk of infection compared to the general population [23]. The vast majority of them received BNT162b2, because it was initially the only available vaccine. Healthcare workers eligible for vaccination were defined as: 1) staff members working for hospitals, clinics, pharmacies, and agencies that provide home-visit nursing services; 2) staff members working for local authorities who are responsible for COVID-19 response; and 3) ambulance crews and personnel of the Japan Coast Guard or Japan Self-Defense Forces [24]. It was also advised that extra doses every day (i.e., residual doses of vaccines at the end of the day) should be distributed to staff and patients at other medical facilities or the general population (prioritizing older adults), especially for people who could receive the vaccine on that day [25,26]. As vaccination coverage increases, the expectation has been that clusters in facilities including healthcare and elderly care facilities, where healthcare workers are working, would be reduced. Figure 1 shows the number of confirmed COVID-19 cases in Japan from the third to the fourth waves, and the reported number of clusters during the pre- and post-vaccination period. Unfortunately, trivial calculations that compare the incidence of infection between vaccinated and unvaccinated do not permit an explicit computation of the risk of clustering in those high-risk facilities. The present study aimed to explicitly estimate the protective effect of vaccination in reducing cluster incidence in those facilities.
We analyzed the weekly data on incidence of clusters from October 26, 2020, to June 27, 2021, which included both pre- and post-vaccination periods. Throughout this article, a cluster is defined as the emergence of five or more confirmed cases in the same facility, regardless of symptoms, diagnosed in a short period of time and considered as linked from each other, which is in common with the governmental definition in Introduction [20]. Although the notification is not legally binding, the occurrence of clusters has been regularly reported by local prefectures and distributed via news media. The media-based cluster data of the abovementioned period were systematically collected across Japan. The dataset of the incidence of confirmed COVID-19 cases for the same period was obtained from the website of MHLW. Confirmatory diagnosis was mostly made by real time polymerase chain reaction (rt-PCR), and all cases were mandated to be notified to the government following implementation of the Infectious Disease Control Law. Distributed vaccine doses among healthcare workers were recorded through the Vaccination System (V-SYS), and the data from February 17 to June 27, 2021, were extracted from the website of Prime Minister's Office of Japan. Original case count data and vaccination data were aggregated weekly.
Here we formulate a mathematical model that is used to estimate the averted risk of clustering that could be attributed to the vaccination. We handled clusters in healthcare and elderly care facilities independently.
We assumed that clusters in each facility occurred proportionally to the incidence of COVID-19 cases, which would be deemed reasonable considering the force of infection [27]; this proportionate relationship is modified by vaccination as follows:
E(nt)={kct−xwithoutvaccination(1−εt)kct−xwithvaccination | (1) |
where nt represents the number of clusters either in healthcare or elderly care facilities in week t, and E(.) represents the expected number. ct−x is the number of confirmed COVID-19 cases in week t−x, i.e., x representing the time lag between COVID-19 cases for the entire population and clusters in facilities. It must be noted that we handle not the number of cases but the number of clusters. Here we specifically considered the time lag x, because a published study suggested that transmission in the facilities is likely to take place at a later part of the local transmission chain that may follow persistent community transmission [19]. k is a scaling parameter that adjusts the proportionality between COVID-19 incidence and clusters. εt is the fraction protected by vaccination, which we consider to be proportional to the protected fraction of the entire population, i.e.,
εt=ω(q1(∑a−1i=0v1,t−iF1,i+∑t−x+ai=a(v1,t−i−v2,t−i+a)F1,i)+q2∑t−xi=0v2,t−iF2,i+a) | (2) |
where ω is a factor of adjustment that converts the fraction protected into the protective effect of vaccination in reducing clusters. v1,t−i and v2,t−i represent the proportion of healthcare workers who received the first and second dose in week t−i (i.e., vaccination coverage of the first and second doses) while i indicates the elapsed number of weeks since the first dose. a represents a fixed number of weeks between doses, recommended to be 3 weeks for BNT162b2 in Japan [28]. q1 and q2 are the maximum effectiveness resulting from the first and second dose of the vaccination. F1,i and F2,i are cumulative distribution functions of building up vaccine-induced immunity following the first and second doses in week i. In the right-hand side of equation (2), the first summation represents immune fraction due to first-dose vaccines in those who are waiting for the second dose due to the time lag of a weeks, the second summation represents the immune fraction of those who received only the first dose, and the third summation is the immune fraction of those who received the second dose.
Because the precise number of frontline healthcare workers in Japan was unknown, we calculated the vaccination coverage among healthcare workers by taking the number of those who had received at least one dose by the last week of our analysis as a denominator, assuming that all frontline healthcare workers would have been vaccinated by then. This assumption was deemed reasonable as the proxy denominator exceeded 4,800,000, which was the estimated number of healthcare workers in the most recent census data [23].
q1, q2, F1,i, and F2,i were derived based on a cohort study conducted in the United Kingdom regarding vaccine effectiveness among healthcare workers who were vaccinated with BNT162b2 when the B.1.1.7 (alpha) variant was the dominant variant in circulation in the country [6]. This published study shared similar epidemiological situations with the present study because the alpha variant was common in Japan from April, and healthcare workers were nearly all fully vaccinated and were exposed at rates similar to the overall population, with an increasing incidence of cases. Accordingly, q1 and q2, i.e., the maximum effectiveness resulting from the first and second doses of the vaccination, were assumed to be 0.71 and 0.86, respectively [6]. F1,i and F2,i were dealt with as logistic functions of weeks since vaccination. These were estimated by fitting logistic models to the datasets from the published cohort study in the United Kingdom [6], and optimal parameter estimates were derived by means of the maximum likelihood method. While we also employed a cumulative Weibull distribution, the logistic function was chosen based on the lowest value of Akaike Information Criterion (AIC). Although the Moderna vaccine, mRNA-1273, was also used beginning May 24, 2021, for healthcare workers and the elderly in Japan, we regarded this impact on our estimate as negligible, because it accounted for only 0.49% (50,989/10,454,415) of the total doses distributed among healthcare workers during the study period.
The parameters k and ω were estimated based on the maximum likelihood method, assuming that the weekly number of clusters follows a Poisson distribution, i.e.,
L(k,ω;D)=∏tE(nt)ntexp(−E(nt))nt! | (3) |
where D represents the observed data. The 95% confidence intervals (CI) were computed via a parametric bootstrapping method using 1,000 samples from a Hessian matrix.
As part of the sensitivity analysis, we examined the impact of varying time lag x on the resulting number of clusters averted. Altering the lag x from 0 to 3, the best fit model for E(nt) was selected according to AIC.
Following the estimation, the numbers of clusters averted in healthcare and elderly care facilities during the study period were then calculated as:
Avertednumberofclusters=∑Tt=1εtkct−x | (4) |
In equation (4), we consider the model without vaccination in equation (1) as a counterfactual scenario. T represents the last week of the study period, and 95% CI for the total averted number of clusters were also computed by a bootstrap method.
From October 26, 2020, to June 27, 2021, a total of 682,702 confirmed COVID-19 cases and 6,775 clusters (i.e., 6,775 groups of cases, each containing five or more confirmed cases) were reported in Japan. Of these clusters, 13.8% (935/6775) and 22.3% (1509/6775) occurred in healthcare and elderly care facilities, respectively. By June 27, 2021, approximately 6 million (5,977,868) of the first doses and 5 million (4,986,483) of the second doses of vaccines were administered among healthcare workers, surpassing the total of 4.8 million persons identified as healthcare workers in the most recent census data.
Figure 2 shows the reported number of clusters in healthcare and elderly care facilities overlaid with the model predictions. In both facilities, the best fit to cluster data was obtained with the lag x = 2 weeks. The results of sensitivity analysis using different x weeks are available in Supplementary Table S1. The scaling factor of the number of clusters, k, and the factor of adjustment from the protected fraction to the population-level protection in the facility, ω, were estimated to be 0.0017 (95% CI: 0.0016–0.0019) and 1.20 (95% CI: 1.13–1.28) for clusters in healthcare facilities, respectively. In elderly care facilities, these estimates were 0.0027 (95% CI: 0.0025–0.0028) and 0.89 (95% CI: 0.76–1.02), respectively. The bootstrap-based uncertainty bounds contained the observed incidence of clusters within the 95% CI.
Figure 3 shows the relative reduction in the number of clusters owing to vaccination, as calculated from (1−εt). The time-dependent proportion of facilities at risk of clustering declined substantially as the vaccination coverage increased. A greater risk reduction was seen in healthcare facilities; e.g., at the end of observation period, the risk was as small as 0.10 (95% CI: 0.044–0.16) times that of the pre-vaccination period, while that in elderly care facilities at the end of the observation period was 0.34 (95% CI: 0.24–0.43) times that of the pre-vaccination period.
The total averted number of clusters in healthcare and elderly care facilities were estimated to be 247 (95% CI: 210–301) and 279 (95% CI: 218–354), respectively, during the study period (Figure 4). As we assumed that the incidence curve of clusters should have been proportional to the incidence of confirmed cases with a fixed delay, the cluster incidence of counterfactual scenario was similar to the epidemic curve of the fourth wave (dashed line in Figure 1), and in the absence of vaccination, the peak height of cluster incidence during the fourth wave could have been similar to that of the third wave.
The present study evaluated the impact of COVID-19 vaccination among healthcare workers on the incidence of clusters in healthcare and elderly care facilities in Japan. We employed a simple approach, imposing assumptions that the incidence of clusters (i.e., the risk of cluster emergence) was proportional to the incidence of confirmed cases, and moreover that the hazard of that proportionality is relatively reduced by the vaccinated immune fraction of the population. We have shown that the numbers of clusters in healthcare and elderly care facilities were reduced to a factor of 0.10 and 0.34 at the end of observation period, and in these facilities, the total of 247 and 279 clusters, respectively, were estimated to have been averted. Without employing the model, one cannot purify this type of total effectiveness (i.e., the sum of direct and indirect effect in reducing the number of clusters) with counterfactual scenarios. The reduced risk of clustering in high-risk facilities by prioritized vaccination among healthcare workers was demonstrated, implying the existence of both direct and indirect impact on clustering.
The most important conclusion of the present study is that vaccination among healthcare professionals yielded a substantial reduction of clusters in healthcare and elderly care facilities. The great reduction in these facilities indicates that not only infections but also a substantial number of severe cases and deaths were avoided, because the susceptible people in the facilities represent a group at high risk for severe illness, involving elderly people and patients with underlying comorbidities [2]. In the present study, the data source relied on an arbitrary definition of cluster that must have involved five or more confirmed COVID-19 cases in Japan [18]. What follows from this definition is that the total number of infections prevented would be even greater than what was estimated here.
The estimated risk reduction reflects both the direct and indirect effectiveness of vaccination. Vaccination averted clusters that could have started from healthcare workers as well as other individuals to whom healthcare professionals could have passed infection. It is worth noting that our model assumed a substantial vaccine effectiveness of BNT162b2 primarily against infection with the B.1.1.7 variant, and the modeled protected fraction well explained the fast decline of clusters during the later stages of the fourth wave. Considering that vaccine effectiveness can differ by variant [29], such a protective effect could also vary accordingly. However, even if the effect is lower, the prioritized vaccination of healthcare workers would be still justified, considering that healthcare professionals play a maintenance role in transmission [1]. In this sense, averting infection in healthcare workers would have an immense impact on preventing facility clusters that involve vulnerable populations at high risk of severe illness and death.
We estimated that there were two weeks of lag between reports of COVID-19 cases and reports of clusters in the facilities. Aside from the aforementioned reason, that is, that clusters probably occur following persistent community transmissions [19], differences in reporting systems may also contribute to this lag. In Japan, confirmed COVID-19 cases must be reported upon diagnosis [18]; however, it is not mandatory to report the incidence of clusters, and this feature could have acted as a source of reporting delay. A cluster has been defined as a series of local transmissions involving five or more confirmed cases, so by the time at least five cases are associated with a facility, their emergence would not result in notification and would therefore go unrecognized.
The present study has several limitations. First, all clusters are not mandated to be notified in Japan, and ascertainment rate may differ according to the epidemic situation (e.g., the reporting rate may be low in the presence of a surge of COVID-19 cases due to overstretched contact tracing capacity). However, the cluster data were collected in a systematic manner across Japan, and the data reliability was improved compared to the early stages of COVID-19 epidemics when efficient and accurate data collection system was still not established. Second, the study did not account for the effectiveness of vaccination among older people. Vaccination among the elderly (aged 65 years and older) began April 12, 2021 in Japan [30]. Although this age group is more likely to be in healthcare and elderly care facilities, there were only 3,104,059 persons out of 35,768,503 (8.7%) of them who were deemed "fully vaccinated", i.e., two weeks following their second vaccination dose, and clearly not all of them were associated with the facilities. We therefore believe that the protective effects brought from the vaccination of the older people did not affect the study results substantially. Third, it should be noted that, by definition by the Japanese government, "healthcare workers" included non-medical staff working in healthcare and elderly care facilities who could contact not only the patients or elderly but also their family members, the food, or fomite, to name a few. Whether or not such non-medical staff should be included in "healthcare workers" and hence in the prioritized group of vaccination might be controversial. However, because they are likely to be part of the transmission chain in these facilities, they were categorized as "healthcare workers". Although the reduced risk attributable to their vaccination might be lower compared to that brought by medical staff, who provide constant patient-facing care, their vaccination should still contribute to prevention of clustering in the facilities. Therefore, we handled them as part of "healthcare workers" in this analysis. Lastly, we assumed that the averted clusters were fully attributable to vaccination; however, there may exist other factors that have contributed to the reduced risk of COVID-19 infection, e.g., seasonal variations in temperature.
Despite the abovementioned limitations, this study presents a novel yet simple approach to evaluating vaccine effectiveness in preventing clusters. This approach could be applied in resource-limited settings. Moreover, the present study endorses the prioritization policy of vaccination among healthcare workers that has been implemented in many countries.
This modeling study quantified the effectiveness of vaccination among healthcare workers in reducing the incidence of clusters in healthcare and elderly care facilities. The estimated impact appears to have been especially substantial because people in such facilities represent those at higher risk of severe illness and death. The present study supports the prioritization of vaccination among healthcare workers that has been implemented in many countries.
H. N. received funding from Health and Labour Sciences Research Grants (19HA1003, 20CA2024, 20HA2007, and 21HB1002); the Japan Agency for Medical Research and Development (AMED; JP20fk0108140 and JP20fk0108535); the Japan Society for the Promotion of Science (JSPS) KAKENHI (17H04701 and 21H03198); the Japan Science and Technology Agency (JST) CREST program (JPMJCR1413); and the SICORP program (JPMJSC20U3 and JPMJSC2105). T.K. received funding from the JSPS KAKENHI (21K10495). The funders played no role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript. We thank John Daniel from Edanz (https://jp.edanz.com/ac) for editing a draft of this manuscript.
All authors declare no conflicts of interest in this paper.
[1] |
D. Xin, Q. Han, A molecular dynamics investigation on the compression of cross-linked epoxy resins, Mol. Simul., 41 (2015), 1509–1514. https://doi.org/10.1080/08927022.2014.994623 doi: 10.1080/08927022.2014.994623
![]() |
[2] | L. Shen, L. Zou, M. Ding, T. Zhao, L. Zhang, Q. Li, Molecular dynamics simulation on dielectric constant and thermal conductivity of crosslink epoxy/functionalized graphene nano-composites, in IOP Conference Series: Materials Science and Engineering, 761 (2020), 012009. https://doi.org/10.1088/1757-899X/761/1/012009 |
[3] |
W. Sun, S. Yu, S. Gao, X. Yao, H. Xu, B. Qian, et al., Molecular dynamics simulation of water molecule diffusion in graphene-reinforced epoxy resin anticorrosive coatings, J. Chin. Soc. Corros. Prot., 41 (2021), 411–416. https://doi.org/10.11902/1005.4537.2020.227 doi: 10.11902/1005.4537.2020.227
![]() |
[4] |
Y. Li, S. Wang, Q. Wang, A molecular dynamics simulation study on enhancement of mechanical and tribological properties of polymer composites by introduction of graphene, Carbon, 111 (2017), 538–545. http://doi.org/10.1016/j.carbon.2016.10.039 doi: 10.1016/j.carbon.2016.10.039
![]() |
[5] |
Q. Xie, K. Fu, S. Liang, B. Liu, L. Lu, X. Yang, et al., Micro-structure and thermomechanical pproperties of crosslinked epoxy composite modified by nano-SiO2: A molecular dynamics simulation, Polymers (Basel), 10 (2018), 801. https://doi.org/10.3390/polym10070801 doi: 10.3390/polym10070801
![]() |
[6] |
Y. Yang, G. Xian, H. Li, L. Sui, Thermal aging of an anhydride-cured epoxy resin, Polym. Degrad. Stab., 118 (2015), 111–119. https://doi.org/10.1016/j.polymdegradstab.2015.04.017 doi: 10.1016/j.polymdegradstab.2015.04.017
![]() |
[7] | D. Li, Evolution of the Properties of an Epoxy Resin Submitted to Water and Alkaline Immersion and the molecular Dynamic Simulation, Master's thesis, Harbin Institute of Technology in Harbin, 2015. |
[8] |
Y. Xiao, G. Xian, Effects of moisture ingress on the bond between carbon fiber and epoxy resin investigated with molecular dynamics simulation, Polym. Compos., 39 (2018), E2074–E2083. https://doi.org/10.1002/pc.24459 doi: 10.1002/pc.24459
![]() |
[9] |
F. Zhao, H. Ba, X. Gao, The durability of epoxy resin coating, J. Wuhan Univ. Technol. Mater. Sci. Ed., 23 (2008), 242–244. https://doi.org/10.1007/s11595-006-2242-z doi: 10.1007/s11595-006-2242-z
![]() |
[10] |
J. Arias, M. M. Escobar, C. Bernal, A. Vázquez, Aging in water and in an alkaline medium of unsaturated polyester and epoxy resins: experimental study and modeling, Adv. Polym. Technol., 37 (2018), 450–460. https://doi.org/10.1002/adv.21684 doi: 10.1002/adv.21684
![]() |
[11] |
A. Uthaman, G. Xian, S. Thomas, Y. Wang, Q. Zheng, X. Liu, Durability of an epoxy resin and its carbon fiber-reinforced polymer composite upon immersion in water, acidic, and alkaline solutions, Polymers (Basel), 12 (2020), 614. https://doi.org/10.3390/polym12030614 doi: 10.3390/polym12030614
![]() |
[12] |
B. Wang, D. Li, G. Xian, C. Li, Effect of Immersion in water or alkali solution on the structures and properties of epoxy resin, Polymers (Basel), 13 (2021), 1902. https://doi.org/10.3390/polym13121902 doi: 10.3390/polym13121902
![]() |
[13] |
F. Jeyranpour, G. Alahyarizadeh, H. Minuchehr, The thermo-mechanical properties estimation of fullerene-reinforced resin epoxy composites by molecular dynamics simulation-A comparative study, Polymer, 88 (2016), 9–18. https://doi.org/10.1016/j.polymer.2016.02.018 doi: 10.1016/j.polymer.2016.02.018
![]() |
[14] |
Y. Zhang, J. Ma, C. Wu, X. Han, W. Zhang, Effects of moisture ingress on the mesoscale mechanical properties of epoxy adhesives under elevated temperature, Polym. Test., 94 (2021), 107049. https://doi.org/10.1016/j.polymertesting.2020.107049 doi: 10.1016/j.polymertesting.2020.107049
![]() |
[15] |
H. Chai, X. Wang, W. U. Rehman, X. Yang, T. Meng, Study on water absorption and mechanical properties of CNF-Ti reinforced epoxy resin composites, Plast., Rubber Compos., 52 (2021), 47–58. https://doi.org/10.1080/14658011.2021.2017127 doi: 10.1080/14658011.2021.2017127
![]() |
[16] |
P. Penjumras, R. A. Rahman, R. A. Talib, K. Abdan, Mechanical properties and water absorption behaviour of durian rind cellulose reinforced poly (lactic acid) biocomposites, Int. J. Adv. Sci. Eng. Inf. Technol., 5 (2015), 343–349. https://doi.org/10.18517/ijaseit.5.5.574 doi: 10.18517/ijaseit.5.5.574
![]() |
[17] |
A. King, G. Johnson, D. Engelberg, W. Ludwig, L. Marrow, Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal, Science, 321 (2008), 382–385. https://doi.org/10.1126/science.abq1274 doi: 10.1126/science.abq1274
![]() |
[18] |
X. Sun, H. Sun, H. Li, H. Peng, Developing polymer composite materials: carbon nanotubes or graphene?, Adv. Mater., 25 (2013), 5153–5176. https://doi.org/10.1002/adma.201301926 doi: 10.1002/adma.201301926
![]() |
[19] |
L. C. O. Silva, G. G. Silva, P. M. Ajayan, B. G. Soares, Long-term behavior of epoxy/graphene-based composites determined by dynamic mechanical analysis, J. Mater. Sci., 50 (2015), 6407–6419. https://doi.org/10.1007/s10853-015-9193-8 doi: 10.1007/s10853-015-9193-8
![]() |
[20] |
W. Hou, Y. Gao, J. Wang, D. J. Blackwood, S. Teo, Recent advances and future perspectives for graphene oxide reinforced epoxy resins, Mater. Today Commun., 23 (2020), 100883. https://doi.org/10.1016/j.mtcomm.2019.100883 doi: 10.1016/j.mtcomm.2019.100883
![]() |
[21] |
Y. Ni, L. Chen, K. Teng, J. Shi, X. Qian, Z. Xu, et al., Superior mechanical properties of epoxy composites reinforced by 3D interconnected graphene skeleton, ACS Appl. Mater. Interfaces, 7 (2015), 11583–11591. https://doi.org/10.1021/acsami.5b02552 doi: 10.1021/acsami.5b02552
![]() |
[22] |
T. Hu, D. Zhao, C. Cheng, S. Meng, Z. Ding, L. Wu, Preparation and mechanical properties of graphene oxide reinforced epoxy composites, J. Beijing Univ. Chem. Technol. (Nat. Sci. Ed.), 45 (2018), 29–33. https://doi.org/10.13543/j.bhxbzr.2018.06.005 doi: 10.13543/j.bhxbzr.2018.06.005
![]() |
[23] |
W. Xiao, Y. Liu, S. Guo, Composites of graphene oxide and epoxy resin assuming a uniform 3D graphene oxide network structure, RSC Adv., 6 (2016), 8694–8698. https://doi.org/10.1039/c6ra16335a doi: 10.1039/c6ra16335a
![]() |
[24] |
H. Yao, S. A. Hawkins, H. Sue, Preparation of epoxy nanocomposites containing well-dispersed graphene nanosheets. Compos. Sci. Technol., 146 (2017), 161–168. https://doi.org/10.1016/j.compscitech.2017.04.026 doi: 10.1016/j.compscitech.2017.04.026
![]() |
[25] |
S. A. Bansal, A. P. Singh, A. Kumar, S. Kumar, N. Kumar, J. K. Goswamy, Improved mechanical performance of bisphenol-A graphene-oxide nano-composites, J. Compos. Mater., 52 (2018), 2179–2188. https://doi.org/10.1177/0021998317741952 doi: 10.1177/0021998317741952
![]() |
[26] |
B. Hu, Y. Cong, B. Zhang, L. Zhang, Y. Shen, H. Huang, Enhancement of thermal and mechanical performances of epoxy nanocomposite materials based on graphene oxide grafted by liquid crystalline monomer with Schiff base, J. Mater. Sci., 55 (2020), 3712–3727. https://doi.org/10.1007/s10853-019-04273-2 doi: 10.1007/s10853-019-04273-2
![]() |
[27] |
Y. Zhang, D. Zhang, X. Wei, S. Zhong, J. Wang, Enhanced tribological properties of polymer composite coating containing graphene at room and elevated temperatures, Coatings, 8 (2018), 91. https://doi.org/10.3390/coatings8030091 doi: 10.3390/coatings8030091
![]() |
[28] |
A. Wolk, M. Rosenthal, J. Weiss, M. Voigt, J. Wesendahl, M. Hartmann, et al., Graphene oxide as flexibilizer for epoxy amine resins, Prog. Org. Coat., 122 (2018), 280–289. https://doi.org/10.1016/j.porgcoat.2018.05.028 doi: 10.1016/j.porgcoat.2018.05.028
![]() |
[29] |
S. C. Her, L. Y. Chen, Fabrication and characterization of graphene/epoxy nanocomposites, Mater. Sci., 25 (2019), 433–440. https://doi.org/10.5755/j01.ms.25.4.19462 doi: 10.5755/j01.ms.25.4.19462
![]() |
[30] |
P. Bian, W. Verestek, S. Yan, X. Xu, H. Qing, S. Schmauder, A multiscale modeling on fracture and strength of graphene platelets reinforced epoxy, Eng. Fract. Mech., (2020), 107197. https://doi.org/10.1016/j.engfracmech.2020.107197 doi: 10.1016/j.engfracmech.2020.107197
![]() |
[31] |
P. Bian, S. Schmauder, H. Qing, Strength and damage of nanoplatelets reinforced polymer: A 3D finite element modeling and simulation, Compos. Struct., 245 (2020), 112337. https://doi.org/10.1016/j.compstruct.2020.112337 doi: 10.1016/j.compstruct.2020.112337
![]() |
[32] |
A. Yadav, A. Kumar, P. K. Singh, K. Sharma, Glass transition temperature of functionalized graphene epoxy composites using molecular dynamics simulation, Integr. Ferroelectr., 186 (2018), 106–114. https://doi.org/10.1080/10584587.2017.1370331 doi: 10.1080/10584587.2017.1370331
![]() |
[33] |
A. Salehi, S. Rash-Ahmadi, Effect of adsorption, hardener, and temperature on mechanical properties of epoxy nanocomposites with functionalized graphene: A molecular dynamics study, J. Mol. Graphics Modell., 117 (2022), 108311. https://doi.org/10.1016/j.jmgm.2022.108311 doi: 10.1016/j.jmgm.2022.108311
![]() |
[34] |
O. Starkova, S. Gaidukovs, O. Platnieks, A. Barkane, K. Garkusina, E. Palitis, et al., Water absorption and hydrothermal ageing of epoxy adhesives reinforced with amino-functionalized graphene oxide nanoparticles. Polym. Degrad. Stab., 191 (2021), 109670. https://doi.org/10.1016/j.polymdegradstab.2021.109670 doi: 10.1016/j.polymdegradstab.2021.109670
![]() |
[35] |
S. Prolongo, A. Jiménez-Suárez, R. Moriche, A. Ureña, Influence of thickness and lateral size of graphene nanoplatelets on water uptake in epoxy/graphene nanocomposites, Appl. Sci., 8 (2018), 1550. https://doi.org/10.3390/app8091550 doi: 10.3390/app8091550
![]() |
[36] |
W. Li, L. Zhang, M. Zhang, S. Chen, Structures of graphene-reinforced epoxy coatings and the dynamic diffusion of guest water: a molecular dynamics study, Ind. Eng. Chem. Res., 59 (2020), 20749–20756. https://doi.org/10.1021/acs.iecr.0c04673 doi: 10.1021/acs.iecr.0c04673
![]() |
[37] |
L. Zhu, C. Feng, Y. Cao, Corrosion behavior of epoxy composite coatings reinforced with reduced graphene oxide nanosheets in the high salinity environments, Appl. Surf. Sci., 493 (2019), 889–896. https://doi.org/10.1016/j.apsusc.2019.06.271 doi: 10.1016/j.apsusc.2019.06.271
![]() |
[38] |
L. Yao, J. Zhao, Mechanism study of doped graphene on improving mechanical properties and corrosion resistance of epoxy resin, J. At. Mol. Phys., 38 (2021), 131–135. https://doi.org/10.19855/j.1000-0364.2021.016003 doi: 10.19855/j.1000-0364.2021.016003
![]() |
[39] |
P. Bian, H. Qing, A phase-field based finite element method for modeling graphene flake reinforced composites, Mech. Adv. Mater. Struct., (2022), 1–16. https://doi.org/10.1080/15376494.2022.2048146 doi: 10.1080/15376494.2022.2048146
![]() |
[40] |
P. L. Bian, H. Qing, S. Schmauder, A novel phase-field based cohesive zone model for modeling interfacial failure in composites, Int. J. Numer. Methods Eng., (2021), 1–24. https://doi.org/10.1002/nme.6821 doi: 10.1002/nme.6821
![]() |
[41] |
W. Li, W. Chai, L. Zhang, Y. Guo, W. Wang, S. Chen, Atomic insight into the influences of moisture ingress on the structures and dynamics of graphene-epoxy interfaces, Compos. Sci. Technol., 219 (2022), 109222. https://doi.org/10.1016/j.compscitech.2021.109222 doi: 10.1016/j.compscitech.2021.109222
![]() |
[42] |
C. Sheng, G. Wu, X. Sun, S. Liu, Molecular dynamics investigation of the thermo-mechanical properties of the moisture invaded and cross-linked epoxy system, Polymers (Basel), 14 (2022), 103, https://doi.org/10.3390/polym14010103 doi: 10.3390/polym14010103
![]() |
[43] |
J. Fan, P. Li, Z. Wang, J. Yang, The temperature-dependent properties of epoxy-functionalized graphene oxide/epoxy nanocomposites: insights from simulation and experiment, J. Mater. Sci., 57 (2022), 15298–15313, https://doi.org/10.1007/s10853-022-07575-0 doi: 10.1007/s10853-022-07575-0
![]() |
[44] |
K. Fu, Q. Xie, F. LÜ, Q. Duan, X. Wang, Q. Zhu, et al., Molecular dynamics simulation and experimental studies on the thermomechanical properties of epoxy resin with different anhydride curing agents, Polymers (Basel), 11 (2019), 975, https://doi:10.3390/polym11060975 doi: 10.3390/polym11060975
![]() |
[45] |
B. S. Sindu, S. Sasmal, Evaluation of mechanical characteristics of nano modified epoxy based polymers using molecular dynamics, Comput. Mater. Sci., 96 (2015), 146–158, http://dx.doi.org/10.1016/j.commatsci.2014.09.003 doi: 10.1016/j.commatsci.2014.09.003
![]() |
[46] |
Q. Yang, X. Yang, X. Li, L. Shi, G. Sui, The curing and thermal transition behavior of epoxy resin: a molecular simulation and experimental study, RSC Adv., 3 (2013), 7452–7459. https://doi.org/10.1039/c3ra40699g doi: 10.1039/c3ra40699g
![]() |
[47] |
C. Sheng, G. Wu, X. Sun, S. Liu, Molecular dynamics investigation of the thermo-mechanical properties of the moisture invaded and cross-linked epoxy system, Polymers (Basel), 14 (2022), 103. https://doi.org/10.3390/polym14010103 doi: 10.3390/polym14010103
![]() |
[48] |
S. Ma, P. Chen, J. Xu, X. Xiong, Molecular dynamics simulations of key physical properties and microstructure of epoxy resin cured with different curing agents, J. Mater. Sci., 57 (2022), 1123–1133. https://doi.org/10.1007/s10853-021-06799-w doi: 10.1007/s10853-021-06799-w
![]() |
[49] | Y. Jin, X. Han, P. Hu, Modelling and Experimental Study on Diffusion Characteristics of Epoxy Adhesive Immersed in Aqueous Environment, The 26th Annual Conference of Beijing Adhesion Society, Beijing, 2017. |
[50] | K. Li, Molecular Dynamic Simulations of Crosslinked Epoxy Resin and Properties of Nano-Composites Containing Phenyl POSS, Ph.D thesis, Beijing University of Chemical Technology, Beijing, 2017. |
[51] | Y. Liu, Research on the Aging Properties of Epoxy Resin in Hygrothermal Environment, Master's thesis, Chongqing University in Chongqing, 2018 |
[52] |
R. Cai, J. Zhao, N. Lv, A. Fu, C. Yin, C. Song, et al., Curing and molecular dynamics simulation of MXene/Phenolic epoxy composites with different amine curing agent systems, Nanomaterials, 12 (2022), 2249. https://doi.org/10.3390/nano12132249 doi: 10.3390/nano12132249
![]() |
[53] |
Y. Xie, H. Lei, H. Huang, H. Pan, S. Zhao, Y. Liu, et al., Molecular simulation on hygrothermal ageing process of epoxy resin, Insul. Mater., 52 (2019), 70–77. https://doi.org/10.16790/j.cnki.1009-9239.im.2019.09.013 doi: 10.16790/j.cnki.1009-9239.im.2019.09.013
![]() |
[54] |
H. Yan, Z. Wang, F. Sun, R. Gao, Y. Fu, Molecular dynamics simulation of crosslinked epoxy resin tensile properties, Eng. Plast. Appl., 50 (2022), 113–117, https://doi.org/10.3969/j.issn.1001-3539.2022.12.019 doi: 10.3969/j.issn.1001-3539.2022.12.019
![]() |
[55] |
S. Yang, J. Qu, Computing thermomechanical properties of crosslinked epoxy by molecular dynamic simulations, Polymer, 53 (2012), 4806–4817, http://dx.doi.org/10.1016/j.polymer.2012.08.045 doi: 10.1016/j.polymer.2012.08.045
![]() |
[56] |
C. Li, A. Strachan, Molecular dynamics predictions of thermal and mechanical properties of thermoset polymer EPON862/DETDA, Polymer, 52 (2011), 2920–2928, https://doi:10.1016/j.polymer.2011.04.041 doi: 10.1016/j.polymer.2011.04.041
![]() |
[57] |
M. Y. Fard, Y. Liu, A. Chattopadhyay, Characterization of epoxy resin including strain rate effects using digital image correlation system, J. Aerosp. Eng., 25 (2012), 308–319. http://dx.doi.org/10.1061/(ASCE)AS.1943-5525.0000127 doi: 10.1061/(ASCE)AS.1943-5525.00001
![]() |
[58] | D. Xin, Mechanical Properties and the Interface Failure Mechanism of Epoxy Resin under Hygrothermal Condition, Ph.D thesis, South China University of Technology, Guangzhou, 2013. |
1. | Adetola Aroloye, Parking Policies to Reduce Car Use and Congestion in Urban Areas, 2023, 1556-5068, 10.2139/ssrn.4605119 | |
2. | Josue Ortega, Ruffo Villa Uvidia, Mathematical Models Applied to the Localization of Park-and-Ride Systems: A Systematic Review, 2025, 7, 2624-8921, 46, 10.3390/vehicles7020046 |