Research article Topical Sections

Polyurea/Fused-silica interfacial decohesion induced by impinging tensile stress-waves

  • Received: 05 March 2015 Accepted: 14 April 2016 Published: 14 April 2016
  • All-atom non-equilibrium molecular-dynamics simulations are used to investigate the problems of polyurea-borne tensile-stress waves interacting with a polyurea/fused-silica interface and fused-silica tensile-stress waves interacting with a fused-silica/polyurea interface, and the potential for the accompanying interfacial decohesion. To predict the outcome of the interactions of stress-waves with the material-interfaces in question, at the continuum level, previously determined material constitutive relations for polyurea and fused-silica are used within an acoustic-impedance-matching procedure. These continuum-level predictions pertain solely to the stress-wave/interface interaction aspects resulting in the formation of transmitted and reflected stress- or release-waves, but do not contain any information regarding potential interfacial decohesion. Present direct molecular-level simulations confirmed some of these continuum-level predictions, but also provided direct evidence of the nature and the extent of interfacial decohesion. In the molecular-level simulations, reactive force-field potentials are utilized to properly model the initial state of interfacial cohesion and its degradation during stress-wave-loading. Examination of the molecular-level interfacial structure before the stress-wave has interacted with the given interface, revealed local changes in the bonding structure, suggesting the formation of an “interphase.” This interphase was subsequently found to greatly affect the polyurea/fused-silica decohesion strength and the likelihood for interfacial decohesion during the interaction of the stress-wave with the interface.

    Citation: Mica Grujicic, Jennifer S. Snipes, S. Ramaswami. Polyurea/Fused-silica interfacial decohesion induced by impinging tensile stress-waves[J]. AIMS Materials Science, 2016, 3(2): 486-507. doi: 10.3934/matersci.2016.2.486

    Related Papers:

  • All-atom non-equilibrium molecular-dynamics simulations are used to investigate the problems of polyurea-borne tensile-stress waves interacting with a polyurea/fused-silica interface and fused-silica tensile-stress waves interacting with a fused-silica/polyurea interface, and the potential for the accompanying interfacial decohesion. To predict the outcome of the interactions of stress-waves with the material-interfaces in question, at the continuum level, previously determined material constitutive relations for polyurea and fused-silica are used within an acoustic-impedance-matching procedure. These continuum-level predictions pertain solely to the stress-wave/interface interaction aspects resulting in the formation of transmitted and reflected stress- or release-waves, but do not contain any information regarding potential interfacial decohesion. Present direct molecular-level simulations confirmed some of these continuum-level predictions, but also provided direct evidence of the nature and the extent of interfacial decohesion. In the molecular-level simulations, reactive force-field potentials are utilized to properly model the initial state of interfacial cohesion and its degradation during stress-wave-loading. Examination of the molecular-level interfacial structure before the stress-wave has interacted with the given interface, revealed local changes in the bonding structure, suggesting the formation of an “interphase.” This interphase was subsequently found to greatly affect the polyurea/fused-silica decohesion strength and the likelihood for interfacial decohesion during the interaction of the stress-wave with the interface.


    加载中
    [1] Grujicic M, Ramaswami S, Snipes JS, et al. (2014) Multi-scale computation-based design of nano-segregated polyurea for maximum shockwave-mitigation performance. AIMS Mater Sci 1: 15–27. doi: 10.3934/matersci.2014.1.15
    [2] Grujicic M, Bell WC, Pandurangan B, et al. (2010) Blast-wave impact-mitigation capability of polyurea when used as helmet suspension pad material. Mater Des 31: 4050–4065. doi: 10.1016/j.matdes.2010.05.002
    [3] Grujicic M, Snipes JS, Galgalikar R, et al. (2014) Material-model based determination of the shock-Hugoniot relations in nanosegregated polyurea. J Mater Eng Perform 23: 357–371. doi: 10.1007/s11665-013-0769-7
    [4] Grujicic M, He T, Pandurangan B, et al. (2012) Experimental characterization and material-model development for microphase-segregated polyurea : an overview J Mater Eng Perform 21: 2–16.
    [5] Grujicic M, Pandurangan B, King AE, et al. (2011) Multi-length scale modeling and analysis of microstructure evolution and mechanical properties in polyurea. J Mater Sci 46: 1767–1779. doi: 10.1007/s10853-010-4998-y
    [6] Castagna AM, Pangon A, Choi T, et al. (2012) The role of soft segment molecular weight on microphase separation and dynamics of bulk polymerized polyureas. Macromol 45: 8438–8444. doi: 10.1021/ma3016568
    [7] Bogoslovov RB, Roland CM, Gamache RM (2007) Impact-induced glass-transition in elastomeric coatings. App Phys Let 90: 221910. doi: 10.1063/1.2745212
    [8] Grujicic M, Pandurangan B, He T, et al. (2010) Computational investigation of impact energy absorption capability of polyurea coatings via deformation-induced glass transition. Mater Sci Eng A 527: 7741–7751. doi: 10.1016/j.msea.2010.08.042
    [9] Grujicic M, Bell WC, Pandurangan B, et al. (2011) Fluid/structure interaction computational investigation of the blast-wave mitigation efficacy of the advanced combat helmet. J Mater Eng Perform 20: 877–893.
    [10] Grujicic A, LaBerge M, Grujicic M, et al. (2012) Potential improvements in shockwave-mitigation efficacy of a polyurea-augmented advanced combat helmet: a computational investigation. J Mater Eng Perform 21: 1562–1579. doi: 10.1007/s11665-011-0065-3
    [11] Grujicic M, d’Entremont BP, Pandurangan B, et al. (2012) Concept-level analysis and design of polyurea for enhanced blast-mitigation performance. J Mater Eng Perform 21: 2024–2037. doi: 10.1007/s11665-011-0117-8
    [12] Grujicic M, d’Entremont BP, Pandurangan B, et al. (2012) A study of the blast-induced brain white-matter damage and the associated diffuse axonal injury. Multidisc Model Mater Struc 8: 213–245. doi: 10.1108/15736101211251220
    [13] Grujicic M, Pandurangan B, Bell WC, et al. (2011) Molecular-level simulations of shockwave generation and propagation in polyurea. Mater Sci Eng A 528: 3799–3808. doi: 10.1016/j.msea.2011.01.081
    [14] Grujicic M, Yavari R, Snipes JS, et al. (2012) Molecular-Level computational investigation of shockwave mitigation capability of polyurea. J Mater Sci 47: 8197–8215. doi: 10.1007/s10853-012-6716-4
    [15] Grujicic M, Snipes JS, Ramaswami S (2015) Meso-scale computational investigation of polyurea microstructure and its role in shockwave attenuation/dispersion. AIMS Mater Sci 2: 163–188. doi: 10.3934/matersci.2015.3.163
    [16] Grujicic M, Snipes JS, Ramaswami S, et al. (2014) Meso-scale computational investigation of shock-wave attenuation by trailing release-wave in different grades of polyurea. J Mater Eng Perform 23: 49–64. doi: 10.1007/s11665-013-0760-3
    [17] Kingery WD, Bowen HK, Uhlmann DR (1976) Introduction to Ceramics, 2nd Ed., New York: John Wiley & Sons, 91–124.
    [18] Grujicic M, Bell WC, Pandurangan B, et al. (2011) The effect of high-pressure densification on ballistic-penetration resistance of a soda-lime glass. J Mater: Des and Appl 225: 298–315.
    [19] Grujicic M, Bell WC, Glomski PS, et al. (2011) Multi-length scale modeling of high-pressure induced phase transformations in soda-lime glass. J Mater Eng Perform 20: 1144–1156. doi: 10.1007/s11665-010-9774-2
    [20] Grujicic M, Bell WC, Pandurangan B, et al. (2012) Molecular-level simulations of shock generation and propagation in soda-lime glass. J Mater Eng Perform 21: 1580–1590. doi: 10.1007/s11665-011-0064-4
    [21] Grujicic M, Pandurangan B, Zhang Z, et al. (2012) Molecular-level analysis of shock-wave physics and derivation of the Hugoniot relations for fused silica. J Mater Eng Perform 21: 823–836.
    [22] van Duin ACT, Dasgupta S, Lorant F, et al. (2001) ReaxFF: A reactive force field for hydrocarbons J Phys Chem A 105: 9396–9409.
    [23] IUPAC Gold Book, “bond order,” http://goldbook.iupac.org/B00707.html, accessed November 22, 2013.
    [24] Chen H-P, Kalia RK, Kaxiras E, et al. (2010) Embrittlement of metal by solute segregation-induced amorphization. Phys Rev Lett 104: 155502. doi: 10.1103/PhysRevLett.104.155502
    [25] Materials Visualizer Datasheet. Accelrys, Inc. (2014) Available from: http://accelrys.com/products/datasheets/materials-visualizer.pdf.
    [26] Amorphous Cell Datasheet. Accelrys, Inc. (2014) Available from: http://accelrys.com/products/datasheets/amorphous-cell.pdf.
    [27] Liu L, Liu Y, Zybin SV, et al. (2011) ReaxFF-lg: Correction of the ReaxFF reactive force field for London dispersion, with applications to the equations of state for energetic materials. J Phys Chem A 115: 11016–11022. doi: 10.1021/jp201599t
    [28] Discover Datasheet. Accelrys, Inc. (2014) Available from: http://accelrys.com/products/datasheets/discover.pdf.
    [29] Grujicic M, Yavari R, Snipes JS, et al. (2014) All-atom molecular-level computational simulations of planar longitudinal shockwave interactions with polyurea, soda-lime glass and polyurea/glass interfaces. Multidisc Model Mater Struct 10: 474–510. doi: 10.1108/MMMS-11-2013-0070
    [30] Grujicic M, Ramaswami S, Snipes JS, et al. (2013) Axial-compressive behavior, including kink-band formation and propagation, of single p-phenylene terephthalamide (PPTA) fibers. Adv Mater Sci Eng 2013: Article ID 329549. doi: 10.1155/2013/329549.
    [31] Grujicic M, Yavari R, Snipes JS, et al. (2014) All-atom molecular-level computational analyses of polyurea/fused-silica interfacial decohesion caused by impinging tensile stress-waves. Inter J Struc Integ 5: 339–367. doi: 10.1108/IJSI-01-2014-0001
  • Reader Comments
  • © 2016 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(4593) PDF downloads(1230) Cited by(1)

Article outline

Figures and Tables

Figures(8)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog