Research article

Storage Solutions for Power Quality Problems in Cyprus Electricity Distribution Network

  • Received: 31 October 2013 Accepted: 20 December 2013 Published: 08 January 2014
  • In this work, a prediction of the effects of introducing energy storage systems on the network stability of the distribution network of Cyprus and a comparison in terms of cost with a traditional solution is carried out. In particular, for solving possible overvoltage problems, several scenarios of storage units' installation are used and compared with the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network. For the comparison, a case study of a typical LV distribution feeder in the power system of Cyprus is used. The results indicated that the performance indicator of each solution depends on the type, the size and the position of installation of the storage unit. Also, as more storage units are installed the better the performance indicator and the more attractive is the investment in storage units to solve power quality problems in the distribution network. In the case where the technical requirements in voltage limitations according to distribution regulations are satisfied with one storage unit, the installation of an additional storage unit will only increase the final cost. The best solution, however, still remains the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network, due to the lower investment costs compared to that of the storage units.

    Citation: Andreas Poullikkas, Savvas Papadouris, George Kourtis, Ioannis Hadjipaschalis. Storage Solutions for Power Quality Problems in Cyprus Electricity Distribution Network[J]. AIMS Energy, 2014, 2(1): 1-17. doi: 10.3934/energy.2014.1.1

    Related Papers:

  • In this work, a prediction of the effects of introducing energy storage systems on the network stability of the distribution network of Cyprus and a comparison in terms of cost with a traditional solution is carried out. In particular, for solving possible overvoltage problems, several scenarios of storage units' installation are used and compared with the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network. For the comparison, a case study of a typical LV distribution feeder in the power system of Cyprus is used. The results indicated that the performance indicator of each solution depends on the type, the size and the position of installation of the storage unit. Also, as more storage units are installed the better the performance indicator and the more attractive is the investment in storage units to solve power quality problems in the distribution network. In the case where the technical requirements in voltage limitations according to distribution regulations are satisfied with one storage unit, the installation of an additional storage unit will only increase the final cost. The best solution, however, still remains the alternative solution of extra cable connection between the node with the lowest voltage and the node with the highest voltage of the distribution network, due to the lower investment costs compared to that of the storage units.


    加载中
    [1] European Commission: Directive 2009/28/EC of the European Parliament and of the Council 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC, 2009. Available from: http://ec.europa.eu/index_en.htm.
    [2] Poullikkas A., Kourtis G., Hadjipaschalis I. (2011) A hybrid model for the optimum integration of renewable technologies in power generation systems. Energ Policy 39: 926-935. doi: 10.1016/j.enpol.2010.11.018
    [3] Noroozian R., Abedi M., Gharehpetian G.B., Hosseini S.H. (2010) Distributed resources and DC distribution system combination for high power quality. Int J Elec Power 32: 769-781. doi: 10.1016/j.ijepes.2010.01.013
    [4] Koohi-Kamali S., Tyagi V.V., Rahim N.A., Panwar N.L., Mokhlis H. (2013) Emergence of energy storage technologies as the solution for reliable operation of smart power systems: A review. Renew Sust Energ Rev 25: 135-165. doi: 10.1016/j.rser.2013.03.056
    [5] Schreurs M., De Boer P., Hooiveld R. (2010) GROW-DERS; Grid reliability and operability with distributed generation using flexible storage. In proceeding of China International Conference on Electricity Distribution.
    [6] Arghandeh R., Onen A., Jung J., Broadwater R.P. (2013) Harmonic interactions of multiple distributed energy resources in power distribution networks. Electr Pow Syst Res 105: 124-133. doi: 10.1016/j.epsr.2013.07.018
    [7] Khalid M., Savkin A.V. (2014) Minimization and control of battery energy storage for wind power smoothing: Aggregated, distributed and semi-distributed storage. Renew Energ 64: 105-112. doi: 10.1016/j.renene.2013.09.043
    [8] Cyprus Transmission System Operator: Transmission and Distribution Rules, 2011. Available from: http://www.dsm.org.cy/nqcontent.cfm?a_id=1&lang=l2
    [9] The GROW-DERS project. Available from: http://growders.eu/
    [10] Kashem M.A., Ledwich G. (2007) Energy requirement for distributed energy resources with battery energy storage for voltage support in three-phase distribution lines. Electr Pow
    [11] Syst Res 77: 10-23.
    [12] 11. Farhoodnea M., Mohamed A., Shareef H., Zayandehroodi H. (2013) Power quality impacts of high-penetration electric vehicle stations and renewable energy-based generators on power distribution systems. Measurement 46: 2423-2434. doi: 10.1016/j.measurement.2013.04.032
    [13] 12. PowerFactory: User's Manual DIgSILENT PowerFactory Version 14.0. Available from : http://www.digsilent.de/index.php/products-powerfactory.html
    [14] 13. De Boer P., Gütschow D., Cremers R. (2010) GROW-DERS; Grid reliability and operability with distributed generation using flexible storage, presented at the CIRED Workshop, Lyon, France.
    [15] 14. Kamatchi Kannan V., Rengarajan N. (2012) Photovoltaic based distribution static compensator for power quality improvement. Int J Elec Power 42: 685-692. doi: 10.1016/j.ijepes.2012.04.061
    [16] 15. Hadjipaschalis I., Poullikkas A., Efthimiou V. (2009) Overview of current and future energy storage technologies for electric power applications. Renew Sust Energ Rev 13: 1513-1522. doi: 10.1016/j.rser.2008.09.028
    [17] 16. Poullikkas A. (2013) A comparative overview of large-scale battery systems for electricity storage. Renew Sust Energ Rev 27: 778-788. doi: 10.1016/j.rser.2013.07.017
  • Reader Comments
  • © 2014 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5999) PDF downloads(1117) Cited by(4)

Article outline

Figures and Tables

Figures(12)  /  Tables(3)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog