Research article Special Issues

Minimally invasive treatment of calcaneal fractures via the sinus tarsi approach based on a 3D printing technique

  • Received: 22 December 2018 Accepted: 27 January 2019 Published: 26 February 2019
  • The sinus tarsi approach can be used for a limited exposure of the calcaneal fracture site. The reduction of the posterior articular surface, the shape of the calcaneus, the precise placement of the sustentacular screw (SS), the posterior articular surface screw of the calcaneal (PASS), and the long axis screw of the calcaneal (LAS) are still challenging. To that end, we proposed a minimally invasive technique for the treatment of calcaneal fractures via the sinus tarsi approach in combination with a three-dimensional (3D) printing technique. First, a 3D reconstructed model of the bilateral calcanei was obtained according to the computed tomography (CT) scan data and was used to simulate the placement of screws and acquire the screw trajectory parameters. Next, using 3D printing, a model of the calcaneus was printed, and the minimally invasive steel plate was pre-shaped to fit the lateral wall of the model. Finally, a total of 25 patients underwent this procedure. The results showed significant accuracy improvement in terms of the SS, PASS and LAS placement and in terms of the parameters including Bohler's angle, Gissane's angle, and the calcaneal width. In this work, the technique of the personalized minimally invasive treatment of calcaneal fractures improved the accuracy of screw placement (SP) and the reduction rate of posterior articular surface, improved the shape of the calcaneus, and increased the precision of the minimally invasive treatment of calcaneal fractures via the sinus tarsi approach.

    Citation: Lufeng Yao, Haiqing Wang, Feng Zhang, Liping Wang, Jianghui Dong. Minimally invasive treatment of calcaneal fractures via the sinus tarsi approach based on a 3D printing technique[J]. Mathematical Biosciences and Engineering, 2019, 16(3): 1597-1610. doi: 10.3934/mbe.2019076

    Related Papers:

  • The sinus tarsi approach can be used for a limited exposure of the calcaneal fracture site. The reduction of the posterior articular surface, the shape of the calcaneus, the precise placement of the sustentacular screw (SS), the posterior articular surface screw of the calcaneal (PASS), and the long axis screw of the calcaneal (LAS) are still challenging. To that end, we proposed a minimally invasive technique for the treatment of calcaneal fractures via the sinus tarsi approach in combination with a three-dimensional (3D) printing technique. First, a 3D reconstructed model of the bilateral calcanei was obtained according to the computed tomography (CT) scan data and was used to simulate the placement of screws and acquire the screw trajectory parameters. Next, using 3D printing, a model of the calcaneus was printed, and the minimally invasive steel plate was pre-shaped to fit the lateral wall of the model. Finally, a total of 25 patients underwent this procedure. The results showed significant accuracy improvement in terms of the SS, PASS and LAS placement and in terms of the parameters including Bohler's angle, Gissane's angle, and the calcaneal width. In this work, the technique of the personalized minimally invasive treatment of calcaneal fractures improved the accuracy of screw placement (SP) and the reduction rate of posterior articular surface, improved the shape of the calcaneus, and increased the precision of the minimally invasive treatment of calcaneal fractures via the sinus tarsi approach.


    加载中


    [1] N. Gougoulias, A. Khanna and D. J. McBride, et al., Management of calcaneal fractures: Systematic review of randomized trials, Brit. Med. Bull., 92 (2009), 153–167.
    [2] N. Epstein, S. Chandran and L. Chou, Current concepts review: Intra-articular fractures of the calcaneus, Foot. Ankle. Int., 33 (2012), 79–86.
    [3] M. J. Gardner, S. E. Nork and D. P. Barei, et al., Secondary soft tissue compromise in tongue-type calcaneus fractures, J. Orthop. Trauma., 22 (2008), 439–45.
    [4] T. Tomesen, J. Biert and J. P. Frolke, Treatment of displaced intra-articular calcaneal fractures with closed reduction and percutaneous screw fixation, J. Bone. Joint. Surg. Am., 93 (2011), 920–928.
    [5] B. S. Sivakumar, P. Wong and C. G. Dick, et al., Arthroscopic reduction and percutaneous fixation of selected calcaneus fractures: Surgical technique and early results, J. Orthop. Trauma., 28 (2014), 569–576.
    [6] A. A. Abdelgawad and E. Kanlic, Minimally invasive (sinus tarsi) approach for open reduction and internal fixation of intra-articular calcaneus fractures in children: Surgical technique and case report of two patients, J. Foot. Ankle. Surg., 54 (2015), 135–139.
    [7] M. Ni, J. Mei and K. Li, et al., The primary stability of different implants for intra-articular calcaneal fractures: An in vitro study, Biomed. Eng. Online., 17 (2018), 50.
    [8] Ihab I. El-Desouky and W. Abu Senna, The outcome of super-cutaneous locked plate fixation with percutaneous reduction of displaced intra-articular calcaneal fractures, Injury., 48 (2017), 525–530.
    [9] C. H. Park and D. H. Yoon, Role of Subtalar Arthroscopy in Operative Treatment of Sanders Type 2 Calcaneal Fractures Using a Sinus Tarsi Approach, Foot. Ankle. Int., 39 (2018), 443–449.
    [10] T. Zhang, Y. Su and W. Chen, et al., Displaced intra-articular calcaneal fractures treated in a minimally invasive fashion: Longitudinal approach versus sinus tarsi approach, J. Bone. Joint. Surg. Am., 96 (2014), 302–309.
    [11] J. H. Yeo, H. J. Cho and K. B. Lee, Comparison of two surgical approaches for displaced intra-articular calcaneal fractures: Sinus tarsi versus extensile lateral approach, BMC. Musculoskeletal. Disord., 16 (2015), 63.
    [12] H. C. Zhou, T. Yu and H. Y. Ren, et al., Clinical Comparison of Extensile Lateral Approach and Sinus Tarsi Approach Combined with Medial Distraction Technique for Intra-Articular Calcaneal Fractures, Orthop. Surg., 9 (2017), 77–85.
    [13] M. Ni, D. W. C. Wong and J. Mei, et al., Biomechanical comparison of locking plate and crossing metallic and absorbable screws fixations for intra-articular calcaneal fractures, Sci. China. Life. Sci., 59 (2016), 958–964.
    [14] I. L. Gitajn, M. Abousayed and R. J. Toussaint, et al., Anatomic Alignment and Integrity of the Sustentaculum Tali in Intra-Articular Calcaneal Fractures: Is the Sustentaculum Tali Truly Constant? J. Bone. Joint. Surg. Am., 96 (2014), 1000–1005.
    [15] A. R. Hsu, R. B. Anderson and B. E. Cohen, Advances in Surgical Management of Intra-articular Calcaneus Fractures, J. Am. Acad. Orthop. Surg., 23 (2015), 399–407.
    [16] B. Swartman, D. Frere and W. Wei, et al., Wire Placement in the Sustentaculum Tali Using a 2D Projection-Based Software Application for Mobile C-Arms: Cadaveric Study, Foot. Ankle. Int., 39 (2018), 485–492.
    [17] P. P. Lin, S. Roe and M. Kay, et al., Placement of screws in the sustentaculum tali. A calcaneal fracture model, Clin. Orthop. Relat. Res., (1998), 194–201.
    [18] C. Wang, D. Huang and X. Ma, et al., Sustentacular screw placement with guidance during ORIF of calcaneal fracture: An anatomical specimen study, J. Orthop. Surg. Res., 12 (2017), 78.
    [19] A. T. Scott, D. A. Pacholke and K. S. Hamid, Radiographic and CT Assessment of Reduction of Calcaneus Fractures Using a Limited Sinus Tarsi Incision, Foot. Ankle. Int., 37 (2016), 950–957.
    [20] K. J. Chung, D. Y. Hong and Y. T. Kim, et al., Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool, Foot. Ankle. Int., 35 (2014), 1231–1236.
    [21] A. R. Hsu and J. K. Ellington, Patient-Specific 3-Dimensional Printed Titanium Truss Cage With Tibiotalocalcaneal Arthrodesis for Salvage of Persistent Distal Tibia Nonunion, Foot. Ankle. Spec., 8 (2015), 483–489.
    [22] J. R. Jastifer and P. A. Gustafson, Three-Dimensional Printing and Surgical Simulation for Preoperative Planning of Deformity Correction in Foot and Ankle Surgery, J. Foot. Ankle. Surg., 56 (2017), 191–195.
    [23] W. Zheng, M. D. Zhenyu Tao and M. D. Yiting Lou, et al., Comparison of the Conventional Surgery and the Surgery Assisted by 3d Printing Technology in the Treatment of Calcaneal Fractures, J. Invest. Surg., (2017), 1–11.
    [24] T. Kurozumi, Y. Jinno and T. Sato, et al., Open reduction for intra-articular calcaneal fractures: Evaluation using computed tomography, Foot. Ankle. Int., 24 (2003), 942–948.
    [25] H. B. Kitaoka, I. J. Alexander and R. S. Adelaar, et al., Clinical rating systems for the ankle-hindfoot, midfoot, hallux, and lesser toes, Foot. Ankle. Int., 15 (1994), 349.
    [26] M. Freyd, The Graphic Rating Scale, J. Educ. Psychol., 14 (1923), 83–102.
    [27] B. W. Bussewitz and C. F. Hyer, Screw placement relative to the calcaneal fracture constant fragment: An anatomic study, J. Foot. Ankle. Surg., 54 (2015), 392–394.
    [28] M. Qiang, Y. Chen and K. Zhang, et al., Effect of sustentaculum screw placement on outcomes of intra-articular calcaneal fracture osteosynthesis: A prospective cohort study using 3D CT, Int. J. Surg., 19 (2015), 72–77.
    [29] J. Geerling, D. Kendoff and M. Citak, et al., Intraoperative 3D imaging in calcaneal fracture care-clinical implications and decision making, J. Trauma., 66 (2009), 768–773.
    [30] R. Kakwani and M. Siddique, Operative compared with nonoperative treatment of displaced intra-articular calcaneal fractures: A prospective, randomized, controlled multicenter trial, J. Bone. Joint. Surg. Am., 84 (2002), 1733–1744.
    [31] A. H. Ragab, I. M. Mubark and A. M. Nagi, et al., Treatment of subtalar calcanean fractures using trans-osseous limited lateral approach, Ortop. Traumatol. Rehabil., 16 (2014), 629–638.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5456) PDF downloads(1235) Cited by(13)

Article outline

Figures and Tables

Figures(7)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog