Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Performance of two different constitutive models and microstructural evolution of GH4169 superalloy

State Key Laboratory of Solidification Processing, Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, PR China

Special Issues: Multi-scale modeling and simulation of different welding processes

The hot compression tests of GH4169 superalloy were performed in the deformation temperature range of 970 to 1150 ℃ and at the strain rate range of 0.001 to 10 s−1. The flow stress is dependent on temperature and strain rate. The flow stresses were respectively predicted by Arrhenius-type and artificial neural network (ANN) models, and the predicted flow stresses were compared with the experimental data. A processing map can be obtained using the dynamic material models (DMM). A three-dimensional (3D) FEM model was established to simulate the hot compression process of GH4169 superalloy. Investigation of the microstructure of the deformed specimen was carried out using theoretical analysis, experimental research and FEM simulation. And the FEM model of compression tests were verified by experimental data.
  Figure/Table
  Supplementary
  Article Metrics
Download full text in PDF

Export Citation

Article outline

Copyright © AIMS Press All Rights Reserved