Research article Topical Sections

Effect of fiberglass form on the tensile and bending characteristic of epoxy composite material

  • Received: 26 August 2020 Accepted: 26 August 2020 Published: 15 September 2020
  • This search focuses on the tensile and bending characteristics of a composite material that reinforced by various forms of fiberglass. Two fiber forms are considered; the first is bi-directional of (0°–90°) fiber direction, the second is random. The fiber thickness of bi-directional form has been investigated by considering thick and thin mats. The composite has been developed by hand lay-up process with a fiber weight ratio of 10%. Three samples of the developed composited have been compared with a base case sample (pure matrix of epoxy resin). Also, a microscopic vision has been captured on the fracture zone of tensile specimens. The results reveal that the random-form composite had maximum tensile strength and transverse stiffness, also, the thin-fiber composite showed maximum ductility.

    Citation: Mohammed O. Atteaa Al-hassany, Ali Al-Dulaimy, Amir Al-Sammarraie, Abed Fares Ali. Effect of fiberglass form on the tensile and bending characteristic of epoxy composite material[J]. AIMS Materials Science, 2020, 7(5): 583-595. doi: 10.3934/matersci.2020.5.583

    Related Papers:

  • This search focuses on the tensile and bending characteristics of a composite material that reinforced by various forms of fiberglass. Two fiber forms are considered; the first is bi-directional of (0°–90°) fiber direction, the second is random. The fiber thickness of bi-directional form has been investigated by considering thick and thin mats. The composite has been developed by hand lay-up process with a fiber weight ratio of 10%. Three samples of the developed composited have been compared with a base case sample (pure matrix of epoxy resin). Also, a microscopic vision has been captured on the fracture zone of tensile specimens. The results reveal that the random-form composite had maximum tensile strength and transverse stiffness, also, the thin-fiber composite showed maximum ductility.


    加载中


    [1] Nagavally RR (2017) Composite material history, types, fabrication, techniques advantage, and applications. Int J Mech Prod Eng 5: 82-87.
    [2] Kulkarni PV, Sawant PJ, Kulkarni VV (2018) Fatigue life prediction and modal analysis of carbon fiber reinforced composite. Adv Mater Proc Technol 4: 651-659.
    [3] Nahas MN (2005) New development in composite materials-recyclable and environment friendly composite materials. Eng Sci 16: 77-102.
    [4] Elanchezhian C, Ramnath BV, Hemalatha J (2014) Mechanical behavior of glass and carbon fiber reinforced composites at varying strain rates and temperatures. Procedia Mater Sci 6: 1405-1418. doi: 10.1016/j.mspro.2014.07.120
    [5] Bolton W (1998) Composites, Engineering Materials Technology, 3 Eds., Butterworth-Heinemann, 303-306.
    [6] Ganugapenta R, Madhusudan S, Balaji K, et al. (2018) Study on mechanical and tribological properties of glass fiber reinforced epoxy composites with Sic & flyash as fillers. IJESI 7: 25-38.
    [7] EL-Wazery MS, EL-Alamy MI, Zoalfakar SH (2017) Mechanical properties of glass fiber reinforced polyester composites. IJAS 14: 121-131.
    [8] Wang L, Ding WX, Sun Y (2015) Effect of different fiber materials on mechanical properties of polyurethane composites. 2015 2nd International Workshop on Materials Engineering and Computer Sciences 406-411.
    [9] Jweeg MJ, Hammond AS, Al-Waily M (2012) Experimental and theoretical studies of mechanical properties for reinforcement fiber types of composite materials. IJMME-IJENS 12: 62-75.
    [10] Jagannatha TD, Harish G (2015) Mechanical properties of carbon glass fiber reinforced epoxy hybrid polymers composites. IJMERR 4:131-137.
    [11] Fernandes FAO, Tavares JP, de Sousa RJA, et al. (2017) Manufacturing and testing composite based on natural materials. Procedia Manuf 13:227-234. doi: 10.1016/j.promfg.2017.09.055
    [12] Budynas RG, Nisbett JK (1976) Shigley's Mechanical Engineering Design, 8 Eds., McGraw-Hill, 39-41.
    [13] Ghasemnejad H, Hadavinia H, Aboutorabi A (2010) Effect of delamination failure in the crashworthy analysis of hybrid composite box structure. Mater Design 31: 1105-1116. doi: 10.1016/j.matdes.2009.09.043
    [14] Sika, Egypt for Construction Chemicals, Sikadur-52 Construction, Product Datasheet, 2003. 2 Eds., 1-2. Avaliable from: www.sika.com.eg.
  • Reader Comments
  • © 2020 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5444) PDF downloads(232) Cited by(4)

Article outline

Figures and Tables

Figures(12)  /  Tables(2)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog