Citation: Krzysztof Gargul. Ammonia leaching of slag from direct-to-blister copper smelting technology[J]. AIMS Materials Science, 2020, 7(5): 565-580. doi: 10.3934/matersci.2020.5.565
[1] | Czernecki J, Śmieszek Z, Miczkowski Z, et al. (2010) Problems of lead and arsenic removal from copper production in a one-stage flash-smelting process. Copper 2010 2: 669-683. |
[2] | Byszyński L, Garycki L, Gostynski Z, et al. (2010) Present and future modernization of metallurgical production lines of the Glogow copper smelter. Copper 2010 2: 631-647. |
[3] | Botor J, Czernecki J, Zajączkowski A (2000) Distribution of Cu and Pb between copper alloys and flash smelting slag, In: Seetharaman S, Sichen Du, Proceedings of the Sixth International Conference on Molten Slags, Fluxes, and Salts, Sztokholm, Sweden-Helsinki, Finland, Sweden: Division of Metallurgy, KTH, 12: 17. |
[4] | Piestrzyński A, Zaleska-Kuśmierczyk M (2007) Monograph of KGHM Polska Miedź SA, 2 Eds., Wrocław: KGHM Cuprum Lubin. |
[5] | Kucharski M, Sak T, Madej P, et al. (2014) A study on the copper recovery from the slag of the Outokumpu direct-to-copper process. Metall Mater Trans B 45: 590-602. doi: 10.1007/s11663-013-9961-2 |
[6] | Bingöl D, Canbazoğlu M, Aydoğan S (2005) Dissolution kinetics of malachite in ammonia/ammonium carbonate leaching. Hydrometallurgy 76: 55-62. doi: 10.1016/j.hydromet.2004.09.006 |
[7] | Künkül A, Gülezgin A, Demirkiran N (2013) Investigation of the use of ammonium acetate as an alternative lixiviant in the leaching of malachite ore. Chem Ind Chem Eng Q 19: 25-35. doi: 10.2298/CICEQ120113039K |
[8] | Baba AA, Ghosh MK, Pradhan SR, et al. (2014) Characterization and kinetic study on ammonia leaching of complex copper ore. Trans Nonferrous Met Soc China 24: 1587-1595. doi: 10.1016/S1003-6326(14)63229-5 |
[9] | Chmielewski T, Wódka J, Iwachów Ł (2009) Ammonia pressure leaching for Lubin shale middlings. Physicochem Probl Miner Process 43: 5-20. |
[10] | Lim Y, Kwon O, Lee J, et al. (2013) The ammonia leaching of alloy produced from waste printed circuit boards smelting process. Geosystem Eng 16: 216-224. doi: 10.1080/12269328.2013.833486 |
[11] | Rudnik E, Pierzynka M, Handzlik P (2016) Ammoniacal leaching and recovery of copper from alloyed low-grade e-waste. J Mater Cycles Waste Manag 18: 318-328. doi: 10.1007/s10163-014-0335-x |
[12] | Beheraa SS, Subhendu K Panda, Das D, et al. (2020) Microwave assisted leaching investigation for the extraction of copper(II) and chromium(III) from spent catalyst. Sep Purif Technol 244: 116842. doi: 10.1016/j.seppur.2020.116842 |
[13] | Parhi PK, Sethy TR, Rout PC, et al. (2015) Selective dissolution of copper from copper-chromium spent catalyst by baking-leaching process. J Ind Eng Chem 21: 604-609. doi: 10.1016/j.jiec.2014.03.026 |
[14] | Parhi PK, Park KH, Senanayake G (2013) A kinetic study on hydrochloric acid leaching of nickel from Ni-Al2O3 spent catalyst. J Ind Eng Chem 19: 589-594. doi: 10.1016/j.jiec.2012.09.028 |
[15] | Gargul K, Boryczko B, Bukowska A (2017) Hydrometallurgical recovery of lead from direct-to-blister copper flash smelting slag. Arch Civ Mech Eng 17: 905-911. doi: 10.1016/j.acme.2017.04.004 |
[16] | Gargul K, Boryczko B, Bukowska A, et al. (2019) S Leaching of lead and copper from flash smelting slag by citric acid. Arch Civ Mech Eng 19: 648-656. doi: 10.1016/j.acme.2019.02.001 |
[17] | Gargul K, Bukowska A (2017) Leaching of direct-to-blister copper flash smelting slag with sodium hydroxide solutions. Przem Chem 96: 2464-2466. |
[18] | Chmielewski T (1996) Leaching of metals from ores, concentrates, by-products and waste materials. Physicochem Probl Mi 30: 217-231. |
[19] | Konishi H (2007) Selective separation and recovery of copper from iron and copper mixed waste by ammonia solution. ISIJ Int 36: 73-79. |
[20] | Chmielewski T, Wódka J (1997) Recovering of silver and copper from silver-bearing waste slag by ammonia leaching. Physicochem Probl Miner Process 31: 51-61. |
[21] | Ochromowicz K, Jeziorek M, Wejman K (2014) Copper(II) extraction from ammonia leach solution. Physicochem Probl Miner Process 50: 327-335. |
[22] | Michimoto T, Kishimoto A, Wada A, et al. (2006) Removal of sulfur from lead sulfide by oxidation-a fundamental study on the recovery of Pb from lead blast furnace dusts. J MMIJ 122: 129-133. doi: 10.2473/shigentosozai.122.129 |
[23] | Deng J, Wen S, Deng J, et al. (2015) Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics. Int J Min Met Mater 22: 241-247. doi: 10.1007/s12613-015-1067-1 |
[24] | Rodliyah I, Ardha N, Saleh N, et al. (2011) Leaching the lead from anode slime by ammonium acetate solution. Indones Min J 14: 123-132. |
[25] | Buzatu T, Petrescu MI, Ghica VG, et al. (2014) Processing oxidic waste of lead-acid batteries in order to recover lead. Asia-Pac J Chem Eng 10: 125-132. |
[26] | Dickinson CF, Heal GR (1999) Solid-liquid diffusion controlled rate equations. Thermochim Acta 340: 89-103. |
[27] | Levenspiel O (1999) Chemical Reaction Engineering, New York: John Wiley & Sons. |
[28] | Mazet N (1992) Modeling of gas-solid reactions 1. Nonporous solids. Int Chem Eng 32: 271-284. |
[29] | Behera SS, Subhendu K Panda, Mandal D, et al. (2019) Ultrasound and microwave assisted leaching of neodymium from waste magnet using organic solvent. Hydrometallurgy 185: 61-70. doi: 10.1016/j.hydromet.2019.02.003 |
[30] | Behera SS, Parhi PK (2016) Leaching kinetics study of neodymium from the scrap magnet using acetic acid. Sep Purif Technol 160: 59-66. doi: 10.1016/j.seppur.2016.01.014 |