Research article Topical Sections

Effect of nano-TiO2 particles on mechanical performance of Al–CNT matrix composite

  • Received: 13 September 2019 Accepted: 14 November 2019 Published: 18 November 2019
  • In this study, a brief review of the effects of the various types of TiO2 nanoparticles and a fixed addition of CNTs to the aluminum matrix on the mechanical, microstructural, and wear characteristics of the resulting composites. Classical powder metallurgy technique was utilized to fabricate the hybrid nanocomposites in this study, while the hybrid nanocomposites were characterized using SEM and XRD. The mechanical properties of the hybrid nanocomposites were evaluated by testing their microhardness, wear tests, and diametral compressive strength. From the SEM and XRD analysis, there was a proper and homogenous distribution of the reinforced particles. Although there was some agglomeration, no intermetallic compounds were found. The study also revealed that the microhardness, diametral compressive strength, and wear resistance significantly improved when the TiO2 nanoparticle content was increased. Also, it was explained that the wear resistance negatively correlated with the applied loads.

    Citation: Saif S. Irhayyim, Hashim Sh. Hammood, Hassan A. Abdulhadi. Effect of nano-TiO2 particles on mechanical performance of Al–CNT matrix composite[J]. AIMS Materials Science, 2019, 6(6): 1124-1134. doi: 10.3934/matersci.2019.6.1124

    Related Papers:

  • In this study, a brief review of the effects of the various types of TiO2 nanoparticles and a fixed addition of CNTs to the aluminum matrix on the mechanical, microstructural, and wear characteristics of the resulting composites. Classical powder metallurgy technique was utilized to fabricate the hybrid nanocomposites in this study, while the hybrid nanocomposites were characterized using SEM and XRD. The mechanical properties of the hybrid nanocomposites were evaluated by testing their microhardness, wear tests, and diametral compressive strength. From the SEM and XRD analysis, there was a proper and homogenous distribution of the reinforced particles. Although there was some agglomeration, no intermetallic compounds were found. The study also revealed that the microhardness, diametral compressive strength, and wear resistance significantly improved when the TiO2 nanoparticle content was increased. Also, it was explained that the wear resistance negatively correlated with the applied loads.


    加载中


    [1] Padmavathi KR, Ramakrishnan R (2014) Tribological behaviour of aluminium hybrid metal matrix composite. Procedia Eng 97: 660-667. doi: 10.1016/j.proeng.2014.12.295
    [2] Al-Qutub AM, Khalil A, Saheb N, et al. (2013) Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes. Wear 297: 752-761. doi: 10.1016/j.wear.2012.10.006
    [3] Balaji D, Vetrivel M, Ekambaram M, et al. (2018) Optimization in tribological behaviour of Al-nanoTiO2 powder metallurgy composites using response surface method. IOP Conf Ser: Mater Sci Eng 390: 12078. doi: 10.1088/1757-899X/390/1/012078
    [4] Harichandran R, Selvakumar N (2016) Effect of nano/micro B4C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process. Arch Civ Mech Eng 16: 147-158. doi: 10.1016/j.acme.2015.07.001
    [5] Abdulhadi H, Ahmad S, Ismail I, et al. (2017) Thermally-induced crack evaluation in H13 tool steel. Metals 7: 475. doi: 10.3390/met7110475
    [6] Nayak D, Debata M (2014) Effect of composition and milling time on mechanical and wear performance of copper-graphite composites processed by powder metallurgy route. Powder Metall 57: 265-273. doi: 10.1179/1743290113Y.0000000080
    [7] Mahdi FM, Razooqi RN, Irhayyim SS (2017) The influence of graphite content and milling time on hardness, compressive strength and wear volume of copper-graphite composites prepared via powder metallurgy. Tikrit J Eng Sci 24: 47-54. doi: 10.25130/tjes.24.2017.31
    [8] Abdulhadi HA, Abbas BH, Rajaa SM, et al. (2019) Influence of shot peening on stress corrosion cracking in 1100-H12 aluminum alloy. AIP Conf Proc 2059: 20024.
    [9] Nturanabo F, Masu L, Kirabira JB (2019) Novel applications of aluminium metal matrix composites, Aluminum Alloys and Composites. DOI: 10.5772/intechopen.86225.
    [10] Gain AK, Zhang L, Quadir MZ (2016) Composites matching the properties of human cortical bones: the design of porous titanium-zirconia (Ti-ZrO2) nanocomposites using polymethyl methacrylate powders. Mater Sci Eng A-Struct 662: 258-267. doi: 10.1016/j.msea.2016.03.066
    [11] Chawla KK (2006) Metal matrix composites, Materials Science and Technology, Germany: Wiley-VCH Verlag GmbH & Co. KGaA.
    [12] Gain AK, Zhang L (2016) Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys. J Mater Sci-Mater El 27: 7524-7533. doi: 10.1007/s10854-016-4732-x
    [13] Kumar A, Patnaik A, Bhat IK (2017) Investigation of nickel metal powder on tribological and mechanical properties of Al-7075 alloy composites for gear materials. Powder Metall 60: 371-383. doi: 10.1080/00325899.2017.1318481
    [14] Simões S, Viana F, Reis M, et al. Aluminum and nickel matrix composites reinforced by CNTs: dispersion/mixture by ultrasonication. Metals 7: 279.
    [15] Dewangan S, Ganguly SK, Banchhor R (2018) Analysis of Al 6061-TiO2-CNT metal matrix composites produced by stir casting process. IJEMR 8: 147-152.
    [16] Nassar AE, Nassar EE (2017) Properties of aluminum matrix nano composites prepared by powder metallurgy processing. J King Saud Univ Sci 29: 295-299.
    [17] ASTM International (2008) Standard test methods for density of compacted or sintered powder metallurgy (PM) products using archimedes' principle. ASTM B962-08, American.
    [18] Irhayyim SS, Ahmed S, Annaz AA (2019) Mechanical performance of micro-Cu and nano-Ag reinforced Al-CNT composite prepared by powder metallurgy technique. Mater Res Express 6: 105071. doi: 10.1088/2053-1591/ab3b21
    [19] ASTM International (2008) Standard test method for microindentation hardness of materials. ASTM E384-08, American.
    [20] Bajpai G, Purohit R, Rana RS, et al. (2017) Investigation and testing of mechanical properties of Al-nano SiC composites through cold isostatic compaction process. Mater Today 4: 2723-2732.
    [21] Jonsén P, Häggblad H.-Å, Sommer K (2007) Tensile strength and fracture energy of pressed metal powder by diametral compression test. Powder Technol 176: 148-155. doi: 10.1016/j.powtec.2007.02.030
    [22] Faisal NH, Mann L, Duncan C, et al. (2019) Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. Surf Coat Tech 357: 497-514. doi: 10.1016/j.surfcoat.2018.10.053
    [23] ASTM International (2010) Standard test method for wear testing with a pin-on-disk apparatus. ASTM G99-05, West Conshohocken.
    [24] Nageswaran G, Natarajan S, Ramkumar KR (2018) Synthesis, structural characterization, mechanical and wear behaviour of Cu-TiO2-Gr hybrid composite through stir casting technique. J Alloy Compod 768: 733-741. doi: 10.1016/j.jallcom.2018.07.288
    [25] Kumar CAV, Rajadurai JS (2016) Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy. T Nonferr Metal Soc 26: 63-73. doi: 10.1016/S1003-6326(16)64089-X
    [26] Ravichandran M, Naveen SA, Anandakrishnan V (2015) Synthesis and forming characteristics of Al-TiO2 powder metallurgy composites during cold upsetting under plane stress state conditions. J Sandw Struct Mater 17: 278-294. doi: 10.1177/1099636214565762
    [27] Ahmed AR, Irhayyim SS, Hammood HS (2018) Effect of yttrium oxide particles on the mechanical properties of polymer matrix composite. IOP Conf Ser Mater Sci Eng 454: 012036. doi: 10.1088/1757-899X/454/1/012036
    [28] Kumar CAV, Rajadurai JS (2016) Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy. T Nonferr Metal Soc 26: 63-73. doi: 10.1016/S1003-6326(16)64089-X
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3158) PDF downloads(661) Cited by(12)

Article outline

Figures and Tables

Figures(7)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog