Research article Special Issues

Preventing early age chloride migration into low-carbon concrete

  • Received: 30 July 2019 Accepted: 21 October 2019 Published: 28 October 2019
  • The use of substituting cementitious materials (SCMs) to produce low-carbon concrete is escalating. This contributes to reducing the anthropogenic emission of CO2, and to reduce harmful temperature gradients during cement hydration in massive structures. Mature low-carbon concretes are known to perform well on both strength and durability. However, the maturity process is slow compared to that of standard concrete. Structures made from low-carbon concrete are subject to penetration of agents like chloride at early age, accelerating degrading processes. Chloride penetration is a major problem especially to infrastructure, due to seawater proximity and the use of de-icing agents. Solutions for reducing penetration of harmful substances are called for, especially at early age in the life of structures made from concrete with high cement substitution.
    This paper reports from investigations on the use of hydrophobic paint utilized as surface treatment, to reduce the penetration of water-soluble agents like chlorides into low-carbon concrete at low maturity. The test specimens are mainly core cylinders, drilled from larger elements subsequent to exposure of NaCl-solution under ambient temperature conditions. Some tests have also been executed on standard test cubes, partly submerged in NaCl-solution and exposed to repeated freezing-thawing cycles to simulate the conditions in the splash-zone of marine structures. The results indicate a potential for reducing chloride penetration with efficiency up to 90%, depending on the exposure regime and the maturity level of the concrete and the hydrophobic paint.

    Citation: Rein Terje Thorstensen. Preventing early age chloride migration into low-carbon concrete[J]. AIMS Materials Science, 2019, 6(6): 1020-1032. doi: 10.3934/matersci.2019.6.1020

    Related Papers:

  • The use of substituting cementitious materials (SCMs) to produce low-carbon concrete is escalating. This contributes to reducing the anthropogenic emission of CO2, and to reduce harmful temperature gradients during cement hydration in massive structures. Mature low-carbon concretes are known to perform well on both strength and durability. However, the maturity process is slow compared to that of standard concrete. Structures made from low-carbon concrete are subject to penetration of agents like chloride at early age, accelerating degrading processes. Chloride penetration is a major problem especially to infrastructure, due to seawater proximity and the use of de-icing agents. Solutions for reducing penetration of harmful substances are called for, especially at early age in the life of structures made from concrete with high cement substitution.
    This paper reports from investigations on the use of hydrophobic paint utilized as surface treatment, to reduce the penetration of water-soluble agents like chlorides into low-carbon concrete at low maturity. The test specimens are mainly core cylinders, drilled from larger elements subsequent to exposure of NaCl-solution under ambient temperature conditions. Some tests have also been executed on standard test cubes, partly submerged in NaCl-solution and exposed to repeated freezing-thawing cycles to simulate the conditions in the splash-zone of marine structures. The results indicate a potential for reducing chloride penetration with efficiency up to 90%, depending on the exposure regime and the maturity level of the concrete and the hydrophobic paint.


    加载中


    [1] Cembureau (The European Cement Association) (2016) Key figures. Available from: https://cembureau.eu/cement-101/key-facts-figures/.
    [2] United Nations (2017) World Population Prospects: The 2017 revision. Available from: https://www.un.org/development/desa/publications/world-population-prospects-the-2017-revision.html.
    [3] Larsen IL, Terjesen O, Thorstensen RT, et al. (2019) Use of concrete for road infrastructure: A SWOT analysis related to the three catchwords sustainability, industrialisation and digitalisation. Transportation Research Board (TRB) Annual Meeting, 31-55.
    [4] Malhotra VM, Mehta PK (2012) High-performance, High-volume Fly Ash Concrete: For Building Sustainable and Durable Structures, Supplementary Cementing Materials for Sustainable Developmen.
    [5] Benhelal E, et al. (2013) Global strategies and potentials to curb CO2 emissions in cement industry. J Clean Prod 51: 142-161. doi: 10.1016/j.jclepro.2012.10.049
    [6] Scrivener KL, John VM, Gartner EM (2018) Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry. Cement Concrete Res 114: 2-26. doi: 10.1016/j.cemconres.2018.03.015
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3706) PDF downloads(443) Cited by(4)

Article outline

Figures and Tables

Figures(9)  /  Tables(1)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog