Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Studying the redistribution of kinetic energy between the morphologically distinct parts of the fragments cloud formed from high-velocity impact fragmentation of an aluminum sphere on a steel mesh

Institute of Applied Mechanics, Russian Academy of Sciences, 125040, Moscow, Russia

Special Issues: Advances and Applications in Computational Modeling of Material Failure

Numerical simulations of experiments (Shumikhin et al., 2014) on the fragmentation of aluminum spheres with diameter of 6.35 mm on single steel-mesh bumpers of different specific mass are carried out in the present work. Specific mass of the mesh bumpers in these experiments was varied by changing the diameter of the wire from which was woven the mesh. The spatial distribution of fragments, their mass and kinetic energy (KE) are determined. The results of the numerical simulations are in good agreement with the experimental data showing that the cloud of fragments composes of two morphologically distinct groups of fragments, which differ greatly in mass: the central group, consisting mainly of four large fragments, and four groups of linearly-distributed chains of smaller fragments. The numerical simulations in agreement with the experiments show that KE of the central group of fragments decreases relative to the total KE of the fragments cloud with increasing the specific mass of the mesh, while the relative KE of other smaller fragments increases.
  Figure/Table
  Supplementary
  Article Metrics

Keywords numerical simulation; high-velocity impact; mesh bumper; fragmentation; kinetic energy of fragments

Citation: Nikolay Myagkov, Timofey Shumikhin. Studying the redistribution of kinetic energy between the morphologically distinct parts of the fragments cloud formed from high-velocity impact fragmentation of an aluminum sphere on a steel mesh. AIMS Materials Science, 2019, 6(5): 685-696. doi: 10.3934/matersci.2019.5.685

References

  • 1. Schäfer F, Lambert M, Christiansen E, et al. (2005) The Inter-agency space debris coordination committee (IADC) protection manual. Proceedings of the 4th European Conference on Space Debris, 39–44.
  • 2. Christiansen EL, Kerr JH (1993) Mesh double-bumper shield: a low-weight alternative for spacecraft meteoroid and orbital debris protection. Int J Impact Eng 14: 169–180.    
  • 3. Bezrukov LN, Gadasin IM, Kiselev AI, et al. (2000) About the physical bases of building the protection of the ISS module ―Zarya‖ against impact damage by near-earth space debris fragments. Cosmonautics Rocket Eng 18: 140–151 (in Russian).
  • 4. Putzar R, Hupfer J, Aridon G, et al. (2013) Screening tests for enhanced shielding against hypervelocity particle impacts for future unmanned spacecraft. Proceedings of 6th European Conference on Space Debris.
  • 5. Horz F, Cintala MJ, Bernhard RP, et al. (1995) Multiple-mesh bumpers: a feasibility study. Int J Impact Eng 17: 431–442.    
  • 6. Semenov A, Bezrukov L, Malkin A, et al. (2006) Impact fragmentation dependence on geometrical parameter of single mesh bumpers. Mech Comp Mater Construct 12: 256–262.
  • 7. Higashide M, Tanaka M, Akahoshi Y, et al. (2006) Hypervelocity impact tests against metallic meshes. Int J Impact Eng 33: 335–342.    
  • 8. Pang BJ, Lin M, Zhang K (2013) The Characteristics study of debris cloud of the mesh shields under hypervelocity impact. Proceedings of 6th European Conference on Space Debris.
  • 9. Shumikhin TA, Myagkov NN, Bezrukov LN (2014) Distribution of kinetic energy among morphologically different parts of debris cloud at high velocity perforation of thin discrete bumpers by compact projectile. Mech Comp Mater Construct 20: 319–333 (in Russian).
  • 10. Myagkov NN, Shumikhin TA, Bezrukov LN (2010) Experimental and numerical study of peculiarities at high-velocity interaction between a projectile and discrete bumpers. Int J Impact Eng 37: 980–994.    
  • 11. Sanchez GA, Christiansen EL (1996) FGB energy block meteoroid and orbital (M/OD) debris shield test report. JSC-27460, NASA Johnson Space Center, Houston.
  • 12. Bezrukov LN, Shumikhin TA, Myagkov NN (2008) Ballistic properties of mesh shielding protection design under high-velocity impact. Mech Comp Mater Construct 14: 202–216 (in Russian).
  • 13. Bezrukov LN, Gadasin IM, Shumikhin TA, et al. (2014) The testing of some prototypes of space debris shield protection. Mech Comp Mater Construct 20: 646–662 (in Russian).
  • 14. Swift HF (1982) Hypervelocity impact mechanics, In: Zukas JA, Nicholas T, Swift HF, et al., Impact Dynamics, New York: John Wiley and Sons.
  • 15. Hallquist JO (2007) LS-DYNA Keyword User's Manual, Version 971, Livermore Software Technology Corporation.
  • 16. Monaghan JJ (2005) Smoothed particle hydrodynamics. Rep Prog Phys 68: 1703–1759.    
  • 17. Myagkov NN, Stepanov VV (2014) On projectile fragmentation at high-velocity perforation of a thin bumper. Physica A 410: 120–130.    
  • 18. Zel'dovich YB, Raizer YP (1966) Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena. New York: Academic.
  • 19. Johnson GR (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics, 541–547.
  • 20. Kanel GI, Razorenov SV, Fortov VE, et al. (2004) Shock-Wave Phenomena and the Properties of Condensed Matter, New York: Springer-Verlag.
  • 21. Piekutowski AJ (1995) Fragmentation of a sphere initiated by hypervelocity impact with a thin sheet. Int J Impact Eng 17: 627–638.    

 

Reader Comments

your name: *   your email: *  

© 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved