Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Corrosion behavior of new generation super-ferritic stainless steels

Department of Engineering, University of Perugia, 06125 Perugia, Italy

Special Issues: Construction Materials

Super-ferritic stainless steels are characterized by structure and properties similar to those of more common ferritic alloys, with the advantage of higher chromium (Cr) and molybdenum (Mo) levels aimed to increase high temperature resistance and corrosion behavior in aggressive environments, such as seawater. This paper focuses on the corrosion behavior of recently developed super-ferritic stainless steels. Such steels are characterized by a Cr content ranging from 21% to 24% and very low carbon and nitrogen levels (C + N < 0.015%). Moreover, low nickel (Ni) and Mo contents are adopted in such steels, following to the high costs of such elements.
  Figure/Table
  Supplementary
  Article Metrics

Keywords stainless steel; corrosion; super-ferritic; austenitic; microstructure

Citation: Andrea Di Schino. Corrosion behavior of new generation super-ferritic stainless steels. AIMS Materials Science, 2019, 6(5): 646-656. doi: 10.3934/matersci.2019.5.646

References

  • 1. Marshall P (1984) Austenitic Stainless Steels: Microstructure and Mechanical Properties, Springer Science & Business Media.
  • 2. Rufini R, Di Pietro O, Di Schino A (2018) Predictive simulation of plastic processing of welded stainless steel pipes. Metals 8: 519.    
  • 3. Corradi M, Di Schino A, Borri A, et al. (2018) A review of the use of stainless steel for masonry repair and reinforcement. Constr Build Mater 181: 335–346.    
  • 4. Borri A, Corradi M, Castori G, et al. (2019) Stainless steel streep-A proposed shear reinforcement for masonry wall panels. Constr Build Mater 211: 594–604.    
  • 5. Gennari C, Lago M, gre B, et al. (2018) Microstructural and corrosion properties of cold rolled laser welded UNS S32750 duplex stainless steel. Metals 8: 1074.    
  • 6. Di Schino A, Longobardo M, Porcu G, et al. (2006) Metallurgical design and development of C125 grade steel for mils sour application. NACE International Corrosion Conference Series 061251–061254.
  • 7. Kumar Sharma D, Filipponi M, Di Schino A, et al. (2019) Corrosion behavior of high temperature fuel cells: issues for materials selection. Metalurgija 58: 347–351.
  • 8. Di Schino A (2016) Analysis of heat treatment effect on microstructural features evolution in a micro-alloyed martensitic steel. Acta Metall Slovaca 22: 266–270.    
  • 9. Talha M, Behera CK, Sinha OP (2013) A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications. Mater Sci Eng C-Mater 33: 3563–3575.    
  • 10. oulan -Petermann L (1996) Processes of bioadhesion on stainless steel surfaces: a review with special reference to the food industry. Biofouling 10: 275–300.    
  • 11. Bregliozzi G, Ahmed SIU, Di Schino A, et al. (2004) Friction and wear behavior of AISI 304 austenitic stainless steel: influence of atmospheric humidity, load range and grain size. Trib Lett 17: 697–704.    
  • 12. Di Schino A, Valentini L, Kenny JM, et al. (2002) Wear resistance of an high nitrogen stainless steel coated with nitrogenated amorphous carbon films. Surf Coat Tech 161: 224–231.    
  • 13. Di Schino A, Kenny JM, Abbruzzese G (2002) Analysis of the recrystallization and grain growth processes in AISI 316 stainless steel. J Mater Sci 37: 5291–5298.    
  • 14. Di Schino A, Di Nunzio PE (2017) Effect of Nb microalloying on the heat affected zone microstructure of girth welded joints. Mater Lett 186: 86–89.    
  • 15. Di Schino A, Guarnaschelli C (2010) Microstructure and cleavage resistance of high strength steels. Mater Sci Forum 638: 3188–3193.
  • 16. Di Schino A, Di Nunzio PE, Lopez Turconi G (2007) Microstructure during tempering of martensite in a medium-C steel. Mater Sci Forum 558: 1435–1441.
  • 17. Guan K, Wang Z, Gao M, et al. (2013) Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel. Mater Design 50: 581–586.    
  • 18. Azuma S, Kudo T, Miyuki H, et al. (2004) Effect of nickel alloying on crevice corrosion resistance of stainless steels. Corros Sci 46: 2265–2280.    
  • 19. Kanko M, Isaacs HS (2001) Effect of molybdenum on pitting corrosion resistance of stainless steels in chloride and bromide solutions. Corros Eng 50: 226–230.    

 

Reader Comments

your name: *   your email: *  

© 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved