Letter Special Issues

Understanding the influence of graphene and nonclay on the microcracks developed at cryogenic temperature

  • Received: 20 May 2019 Accepted: 27 June 2019 Published: 02 July 2019
  • This research examines reduction of microcracks in polyurea by addition of graphene and nanoclay on account of potential improvement in barrier properties. Graphene and nanoclay were added in different wt. fractions to polyurea followed by thin film preparation. The prepared thin film samples were characterized using scanning electron microscopy. Surface images before and after exposure to cryogenic temperature indicate that controlled addition of graphene and nanoclay to polyurea thin film can lead to a reduction in microcracking caused by thermal shocks.

    Citation: Vishanth Uppu, Kunal Mishra, Libin K. Babu, Ranji Vaidyanathan. Understanding the influence of graphene and nonclay on the microcracks developed at cryogenic temperature[J]. AIMS Materials Science, 2019, 6(4): 559-566. doi: 10.3934/matersci.2019.4.559

    Related Papers:

  • This research examines reduction of microcracks in polyurea by addition of graphene and nanoclay on account of potential improvement in barrier properties. Graphene and nanoclay were added in different wt. fractions to polyurea followed by thin film preparation. The prepared thin film samples were characterized using scanning electron microscopy. Surface images before and after exposure to cryogenic temperature indicate that controlled addition of graphene and nanoclay to polyurea thin film can lead to a reduction in microcracking caused by thermal shocks.


    加载中


    [1] Shaffer MSP, Sandler JKW (2006) Carbon nanotube/nanofiber polymer composites, In: Advani SG, Processing and Properties of Nanocomposites, World Scientific, 1–59.
    [2] Mishra K, Singh RP (2019) Effect of APTMS modification on multiwall carbon nanotube reinforced epoxy nanocomposites. Compos Part B-Eng 162: 425–432. doi: 10.1016/j.compositesb.2018.12.134
    [3] Tong Y, Bohm S, Song M (2013) Graphene based materials and their composites as coatings. Austin J Nanomed Nanotechnol 1: 1003.
    [4] Singh V, Joung D, Zhai L, et al. (2011) Graphene based materials: past, present and future. Prog Mater Sci 56: 1178–1271. doi: 10.1016/j.pmatsci.2011.03.003
    [5] Yoo BM, Shin HJ, Yoon HW, et al. (2014) Graphene and graphene oxide and their uses in barrier polymers. J Appl Polym Sci 131: 39628.
    [6] Gilman JW, Morgan AB, Giannelis EP, et al. (1999) Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites-II. Proceedings of the BCC Conference on Flame Retardancy, 1–11.
    [7] Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mat Sci Eng R 28: 1–63. doi: 10.1016/S0927-796X(00)00012-7
    [8] Ogasawara T, Ishida Y, Ishikawa T, et al. (2006) Helium gas permeability of montmorillonite/epoxy nanocomposites. Compos Part A-Appl S 37: 2236–2240. doi: 10.1016/j.compositesa.2006.02.015
    [9] Fragiadakis D, Gamache R, Bogoslovov RB, et al. (2010) Segmental dynamics of polyurea: effect of stoichiometry. Polymer 51: 178–184. doi: 10.1016/j.polymer.2009.11.028
    [10] Casalini R, Bogoslovov R, Qadri SB, et al. (2012) Nanofiller reinforcement of elastomeric polyurea. Polymer 53: 1282–1287. doi: 10.1016/j.polymer.2012.01.034
    [11] Amini MR, Isaacs J, Nemat-Nasser S (2010) Investigation of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments. Mech Mater 42: 628–639. doi: 10.1016/j.mechmat.2009.09.008
    [12] Mihut AM, Sánchez-Ferrer A, Crassous JJ, et al. (2013) Enhanced properties of polyurea elastomeric nanocomposites with anisotropic functionalized nanofillers. Polymer 54: 4194–4203. doi: 10.1016/j.polymer.2013.05.056
    [13] Qian X, Song L, Tai Q, et al. (2013) Graphite oxide/polyurea and graphene/polyurea nanocomposites: a comparative investigation on properties reinforcements and mechanism. Compos Sci Technol 74: 228–234. doi: 10.1016/j.compscitech.2012.11.018
    [14] Cai D, Song M (2014) High mechanical performance polyurea/organoclay nanocomposites. Compos Sci Technol 103: 44–48. doi: 10.1016/j.compscitech.2014.08.011
    [15] Mishra K, Gidley D, Singh RP (2019) Influence of self-assembled compliant domains on the polymer network and mechanical properties of POSS-epoxy nanocomposites under cryogenic conditions. Eur Polym J 116: 283–290. doi: 10.1016/j.eurpolymj.2019.02.034
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3450) PDF downloads(1049) Cited by(0)

Article outline

Figures and Tables

Figures(7)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog