Research article

Preparation and characterization of nanocarbons from Nicotiana tabacum stems

  • Received: 30 June 2018 Accepted: 27 November 2018 Published: 03 December 2018
  • Nanocarbon materials can improve adsoption capacity if the nano size range is optimized during production. In this study, nanocarbons were prepared from green recyclable waste N. tabacum stem using carbonization process and KOH as the activating agent, thus potentially unclocking value in the otherwise waste material. The formation of nanocarbons was investigated at different KOH concentration, activation temperature and carbonization time. Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Brunauer–Emmett–Teller (BET) techniques were used to characterise the nanocarbon material. The results showed that nanocarbons with high specific surface areas in excess of 950 m2/g and nanostructured morphologies characterized by pore width averages ranging from 3.33–8.87 nm, pore diameter 10.59–45.30 nm and particle size 25.34–54.88 nm could be formed. Optimum nanocarbon production was achieved when the precursor was activated using 10% KOH and carbonized at a temperature of 400 ℃ for 4 h. Characteristic FT-IR absorption bands were observed in all carbonized samples. SEM images revealed a dense irregular material with cavities and protuberances. XRD patterns showed that crystallinity of the nanocarbons decreased with increase in carbonization time. The properties reported for the nanocarbons are ideal for adsoption of analytes from complex matrices, hence presenting N. tabacum as a promising low-cost and green alternative precursor for nanocarbon production targeting analytical fields such as solid-phase extraction and solid phase microextraction. The produced nanocarbons appear to be carbon nanoparticles comprising nearly spherical particles.

    Citation: Cabinet Chivimbiso Musuna-Garwe, Netai Mukaratirwa-Muchanyereyi, Mathew Mupa, Courtie Mahamadi, Munyaradzi Mujuru. Preparation and characterization of nanocarbons from Nicotiana tabacum stems[J]. AIMS Materials Science, 2018, 5(6): 1242-1254. doi: 10.3934/matersci.2018.6.1242

    Related Papers:

  • Nanocarbon materials can improve adsoption capacity if the nano size range is optimized during production. In this study, nanocarbons were prepared from green recyclable waste N. tabacum stem using carbonization process and KOH as the activating agent, thus potentially unclocking value in the otherwise waste material. The formation of nanocarbons was investigated at different KOH concentration, activation temperature and carbonization time. Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Brunauer–Emmett–Teller (BET) techniques were used to characterise the nanocarbon material. The results showed that nanocarbons with high specific surface areas in excess of 950 m2/g and nanostructured morphologies characterized by pore width averages ranging from 3.33–8.87 nm, pore diameter 10.59–45.30 nm and particle size 25.34–54.88 nm could be formed. Optimum nanocarbon production was achieved when the precursor was activated using 10% KOH and carbonized at a temperature of 400 ℃ for 4 h. Characteristic FT-IR absorption bands were observed in all carbonized samples. SEM images revealed a dense irregular material with cavities and protuberances. XRD patterns showed that crystallinity of the nanocarbons decreased with increase in carbonization time. The properties reported for the nanocarbons are ideal for adsoption of analytes from complex matrices, hence presenting N. tabacum as a promising low-cost and green alternative precursor for nanocarbon production targeting analytical fields such as solid-phase extraction and solid phase microextraction. The produced nanocarbons appear to be carbon nanoparticles comprising nearly spherical particles.


    加载中
    [1] Madhu R, Palanisamy S, Chen SM, et al. (2014) A low temperature synthesis of activated carbon from the bio waste for simultaneous electrochemical determination of hydroquinone and catechol. J Electroanal Chem 727: 84–90. doi: 10.1016/j.jelechem.2014.06.005
    [2] Hui TS, Zaini MAA (2015) Potassium hydroxide activation of carbon: a commentary. Carbon Lett 16: 275–280. doi: 10.5714/CL.2015.16.4.275
    [3] Ravelo-Pérez LM, Herrera-Herrera AV, Hernandez-Borges J, et al. (2010) Carbon nanotubes: Solid-phase extraction. J Chromatogr A 1217: 2618–2641. doi: 10.1016/j.chroma.2009.10.083
    [4] Li X, Xing W, Zhuo S, et al. (2011) Preparation of capacitor's electrode from sunflower seed shell. Bioresource Technol 102: 1118–1123. doi: 10.1016/j.biortech.2010.08.110
    [5] Ashokumar M, Narayanan NT, Gupta BK, et al. (2013) Conversion of industrial bio-waste into useful nanomaterials. ACS Sustain Chem Eng 1: 619–626. doi: 10.1021/sc3001564
    [6] Rahman MA, Amin SMR, Alam AMS (2012) Removal of methylene blue from waste water using activated carbon prepared from rice husk. Dhaka Univ J Sci 60: 185–189.
    [7] Álvarez-Torrellas S, García-Lovera R, Rodríguez A, et al. (2015) Removal of methylene blue by adsorption on mesoporous carbon from peach stones. Chem Eng Trans 43: 1963–1968.
    [8] Mohan MA, Chadaga M (2014) Methylene blue colour removal using physically and chemically activated cashew nut shell activated carbon. IJTEEE 2: 64–69.
    [9] Molina-Sabio M, Rodriguez-Reinoso F (2004) Role of chemical activation in the development of carbon porosity. Colloid Surface A 241: 15–25. doi: 10.1016/j.colsurfa.2004.04.007
    [10] Peševski MĐ, Iliev BM, Živković DL, et al. (2010) Possibilities for utilization of tobacco stems for production of energetic briquettes. J Agr Sci 55: 45–54. doi: 10.2298/JAS1001045P
    [11] Graciano RML, de Freitas VP, Ábel FM (2014) Simultan sacharification and fermentation of tobacco samples. Analecta Technica Szegedinensia 8: 80–89. doi: 10.14232/analecta.2014.2.80-89
    [12] Qi BC, Aldrich C (2008) Biosorption of heavy metals from aqueous solutions with tobacco dust. Bioresource Technol 99: 5595–5601. doi: 10.1016/j.biortech.2007.10.042
    [13] Ghosh RK, Reddy DD (2013) Tobacco stem ash as an adsorbent for removal of methylene blue from aqueous solution: equilibrium, kinetics, and mechanism of adsorption. Water Air Soil Poll 224: 1582. doi: 10.1007/s11270-013-1582-5
    [14] Wang X, Ouyang Y, Li X, et al. (2008) Room-temperature all-semiconducting sub-10-nm graphene nanoribbon field-effect transistors. Phys Rev Lett 100: 206803. doi: 10.1103/PhysRevLett.100.206803
    [15] Li W, Zhang LB, Peng JH, et al. (2008) Preparation of high surface area activated carbons from tobacco stems with K2CO3 activation using microwave radiation. Ind Crop Prod 27: 341–347. doi: 10.1016/j.indcrop.2007.11.011
    [16] Abechi SE, Gimba CE, Uzairu A, et al. (2013) Preparation and characterization of activated carbon from palm kernel shell by chemical activation. Res J Chem Sci 3: 54–61.
    [17] Viswanathan I, Neel P, Varadarajan TK (2009) Methods of activation and specific applications of carbon materials. National Centre for Catalysis Research, Indian Institute of Technology Madras, Chennai 600 036.
    [18] Makeswari M, Santhi S (2013) Optimization of preparation of activated carbon from Ricinus communis leaves by microwave-assisted zinc chloride chemical activation: Competitive adsorption of Ni2+ ions from aqueous solution. J Chem 2013: 314790.
    [19] ASTM D4607-94 (2006) Standard Test Method for Determination of Iodine Number of Activated Carbon. American Society for Testing and Materials, Annual book of ASTM standards.
    [20] Cao W, Hu SS, Ye LH, et al. (2015) Trace-chitosan-wrapped multi-walled carbon nanotubes as a new sorbent in dispersive micro solid-phase extraction to determine phenolic compounds. J Chromatogr A 1390: 13–21. doi: 10.1016/j.chroma.2015.02.060
    [21] Purkayastha MD, Manhar AK, Mandal M, et al. (2014) Industrial waste-derived nanoparticles and microspheres can be potent antimicrobial and functional ingredients. J Appl Chem 2014: 171427.
    [22] Deng XJ, Guo QJ, Chen XP, et al. (2014) Rapid and effective sample clean-up based on magnetic multiwalled carbon nanotubes for the determination of pesticide residues in tea by gas chromatography–mass spectrometry. Food Chem 145: 853–858. doi: 10.1016/j.foodchem.2013.08.137
    [23] Hou X, Lei SR, Qui ST, et al. (2014) A multi-residue method for the determination of pesticides in tea using multi-walled carbon nanotubes as a dispersive solid phase extraction absorbent. Food Chem 153: 121–129. doi: 10.1016/j.foodchem.2013.12.031
    [24] Rodriguez-Reinos F, Molina-Sabio M, Gonzalez MT (1995) The use of steam and CO2 as activating agents in the preparation of activated carbons. Carbon 33: 15–23. doi: 10.1016/0008-6223(94)00100-E
    [25] Hu B, Wang K, Wu LH, et al. (2010) Engineering carbon materials from the hydrothermal carbonization process of biomass. Adv Mater 22: 813–828. doi: 10.1002/adma.200902812
    [26] Senthilkumar ST, Selvan RK (2013) The biomass derived activated carbon for supercapacitor. AIP Conf Proc 1538: 124–127.
    [27] Strachowski P, Bystrzejewski M (2015) Comparative studies of sorption of phenolic compounds onto carbon-encapsulated iron nanoparticles, carbon nanotubes and activated carbon. Colloid Surface A 467: 113–123. doi: 10.1016/j.colsurfa.2014.11.044
    [28] Marsh H, Rodriguez-Reinoso F (2006) SEM and TEM Images of Structures in Activated Carbons, In: Activated Carbon, 1st edition, Elsevier, 366–382.
    [29] Akbari B, Tavandashti MP, Zandrahimi M (2011) Particle size characterization of nanoparticles-A Practical approach. IJMSE 8: 48–56.
    [30] Hashim M, Sa'adu L (2014) A flexible solid state EDLC from a commercially prepared multiwalled carbon nanortubes and hybrid polymer electrolyte. J Mater Sci Res 3: 13–21.
    [31] Wang HL, Xu ZW, Kohandehghan A, et al. (2013) Interconnected carbon nanosheets derived from hemp for ultrafast supercapacitors with high energy. ACS Nano 7: 5131–5141. doi: 10.1021/nn400731g
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3559) PDF downloads(885) Cited by(3)

Article outline

Figures and Tables

Figures(6)  /  Tables(5)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog