Research article

Experimental investigation of fracture toughness for treated sisal epoxy composite

  • Received: 20 July 2017 Accepted: 08 January 2018 Published: 30 January 2018
  • The aim of this work is to show the fracture toughness behavior of sisal reinforced epoxy composite using fracture toughness testing method by including most important fracture mechanics parameters which is called stress intensity factor K.
    The fracture toughness tests of chopped sisal fiber reinforced epoxy composite materials were carried out using test samples which were prepared according to the ASTM standard. The samples have been fabricated by using the epoxy resin (AY-105) as a matrix and the hardener (HY-951) and the chopped sisal fiber as a reinforcement material with the 15%, 25%, 30%, 35% and 40% fiber weight fraction, random oriented chopped fibers by using hand layup fabrication technique.
    The experimental results justify that the 30/70 composition of fiber and matrix has superior fracture characteristics with KIC of 5.54 MPa·m1/2 and critical strain energy release rate (GIC) of 13.72 MPa·mm and results of this study indicate that using chopped sisal fibers as reinforcement in polymer matrix could successfully develop a composite material in terms of high strength and rigidity for light weight material.

    Citation: Araya Abera Betelie, Yonas Tsegaye Megera, Daniel Telahun Redda, Antony Sinclair. Experimental investigation of fracture toughness for treated sisal epoxy composite[J]. AIMS Materials Science, 2018, 5(1): 93-104. doi: 10.3934/matersci.2018.1.93

    Related Papers:

  • The aim of this work is to show the fracture toughness behavior of sisal reinforced epoxy composite using fracture toughness testing method by including most important fracture mechanics parameters which is called stress intensity factor K.
    The fracture toughness tests of chopped sisal fiber reinforced epoxy composite materials were carried out using test samples which were prepared according to the ASTM standard. The samples have been fabricated by using the epoxy resin (AY-105) as a matrix and the hardener (HY-951) and the chopped sisal fiber as a reinforcement material with the 15%, 25%, 30%, 35% and 40% fiber weight fraction, random oriented chopped fibers by using hand layup fabrication technique.
    The experimental results justify that the 30/70 composition of fiber and matrix has superior fracture characteristics with KIC of 5.54 MPa·m1/2 and critical strain energy release rate (GIC) of 13.72 MPa·mm and results of this study indicate that using chopped sisal fibers as reinforcement in polymer matrix could successfully develop a composite material in terms of high strength and rigidity for light weight material.


    加载中
    [1] Askeland DR, Fulay PP (2009) Essential of materials science and engineering.
    [2] Pil L, Bensadoun F, Pariset J, et al. (2016) Why are designers fascinated by flax and hemp fiber composites? Compos Part A-Appl S 83: 193–205. doi: 10.1016/j.compositesa.2015.11.004
    [3] Berghezan A (1966) Non-ferrous materials. Nucleus 8: 5–11.
    [4] Arpitha GR, Sanjay MR, Naik LL, et al. (2014) Mechanical properties of epoxy base hybrid composites reinforced with sisal/SIC/Glass fiber. Int J Eng Res Gen Sci 2: 398–405.
    [5] Li Y, Hu CJ, Yu YH (2008) Interfacial studies of sisal fiber reinforced high density polyethylene (HDPE) composites. Compos Part A-Appl S 39: 570–578. doi: 10.1016/j.compositesa.2007.07.005
    [6] Prasad V, Joy A, Venkatachalam G, et al. (2014) Finite Element Analysis of jute and banana fibre reinforced hybrid polymer matrix composite and optimization of design parameters using ANOVA Technique. Procedia Eng 97: 1116–1125. doi: 10.1016/j.proeng.2014.12.390
    [7] Barsom JM, Rolfe ST, Stanley TR (1999) Fracture and Fatigue Control in Structures: Application of Fracture Mechanics.
    [8] Knott JF (1973) Fundamentals of fracture mechanics.
    [9] Alawar A, Hamed AM, Al-Kaabi K (2009) Characterization of treated date palm tree fiber as composite reinforcement. Compos Part B-Eng 40: 601–606. doi: 10.1016/j.compositesb.2009.04.018
    [10] Zhu XK, Joyce JA (2012) Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization. Eng Fract Mech 85: 1–46. doi: 10.1016/j.engfracmech.2012.02.001
    [11] ASTM D 5045-99 (1999) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(1818) PDF downloads(1318) Cited by(0)

Article outline

Figures and Tables

Figures(14)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog