Review

Developments in the evaluation of elastic properties of carbon nanotubes and their heterojunctions by numerical simulation

  • Received: 06 March 2017 Accepted: 01 June 2017 Published: 13 June 2017
  • High-tech miniaturization is a strategic area to empower new scientific challenges for which carbon nanotubes are ideal candidates with outstanding electronic, optical and mechanical properties. Carbon nanotubes and their heterojunctions are efficient components for reinforcement of composites, for constructing micro- and nanodevices, and for designing new materials with required electronic and mechanical properties. The carbon nanotubes have been studied experimentally, but a big inconsistency in experimental results has been observed, because of the technical difficulties to operate with nanoscale objects. For this reason, modelling and computer simulation for predicting their mechanical properties have received much attention. This review attempts to classify the accomplishments in predicting of the elastic properties of carbon nanotubes and their heterojunctions by analytical and computational approaches. The literature results concerning Young’s modulus, shear modulus and Poisson’s ratio of perfect and with defects single-walled and multi-walled carbon nanotubes and their heterojunction are analysed and systematized.

    Citation: Nataliya A. Sakharova, Jorge M. Antunes, Andre F. G. Pereira, Jose V. Fernandes. Developments in the evaluation of elastic properties of carbon nanotubes and their heterojunctions by numerical simulation[J]. AIMS Materials Science, 2017, 4(3): 706-737. doi: 10.3934/matersci.2017.3.706

    Related Papers:

  • High-tech miniaturization is a strategic area to empower new scientific challenges for which carbon nanotubes are ideal candidates with outstanding electronic, optical and mechanical properties. Carbon nanotubes and their heterojunctions are efficient components for reinforcement of composites, for constructing micro- and nanodevices, and for designing new materials with required electronic and mechanical properties. The carbon nanotubes have been studied experimentally, but a big inconsistency in experimental results has been observed, because of the technical difficulties to operate with nanoscale objects. For this reason, modelling and computer simulation for predicting their mechanical properties have received much attention. This review attempts to classify the accomplishments in predicting of the elastic properties of carbon nanotubes and their heterojunctions by analytical and computational approaches. The literature results concerning Young’s modulus, shear modulus and Poisson’s ratio of perfect and with defects single-walled and multi-walled carbon nanotubes and their heterojunction are analysed and systematized.


    加载中
    [1] Robertson J (2004) Realistic applications of CNTs. Mater Today 7: 46–52. doi: 10.1016/S1369-7021(04)00448-1
    [2] Dresselhaus MS, Avouris P (2001) Introduction to carbon materials research, In: Dresselhaus, MS, Dresselhaus G, Avouris P, Carbon Nanotubes: Synthesis, Structure, Properties, and Applications, Springer Book Series: Topics in Applied Physics, Germany: Springer-Verlag Berlin Heidelberg, 80: 1–9.
    [3] Neubauer E, Kitzmantel M, Hulman M, et al. (2010) Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes. Compos Sci Technol 70: 2228–2236. doi: 10.1016/j.compscitech.2010.09.003
    [4] Lan Y, Wang Y, Ren ZF (2011) Physics and applications of aligned carbon nanotubes. Adv Phys 60: 553–678. doi: 10.1080/00018732.2011.599963
    [5] Zhang Y, Zhuang X, Muthu J, et al. (2014) Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation. Compos Part B-Eng 63: 27–33.
    [6] Schulz MJ, Shanov VN, Yin Z (2014) Nanotube superfiber Materials, Oxford (UK): Elsevier, 848.
    [7] Wei DC, Liu YQ (2008) The intramolecular junctions of carbon nanotubes. Adv Mater 20: 2815–2841. doi: 10.1002/adma.200800589
    [8] Salvetat JP, Briggs GAD, Bonard JM, et al. (1999) Elastic and shear moduli of single-walled carbon nanotube ropes. Phys Rev Lett 82: 944–947. doi: 10.1103/PhysRevLett.82.944
    [9] Hall AR, An L, Liu J, et al. (2006) Experimental measurement of single-wall carbon nanotube torsional properties. Phys Rev Lett 96: 256102. doi: 10.1103/PhysRevLett.96.256102
    [10] Kallesøe C, Larsen MB, Bøggild P, et al. (2012) 3D mechanical measurements with an atomic force microscope on 1D structures. Rev Sci Instrum 83: 023704. doi: 10.1063/1.3681784
    [11] Wang L, Zhang Z, Han X (2013) In situ experimental mechanics of nanomaterials at the atomic scale. NPG Asia Mater 5: e40. doi: 10.1038/am.2012.70
    [12] Mielke SL, Troya D, Zhan S, et al. (2004) The role of vacancy defects and holes in the fracture of carbon nanotubes. Chem Phys Lett 390: 413–420. doi: 10.1016/j.cplett.2004.04.054
    [13] Hou W, Xiao S (2007) Mechanical behaviors of carbon nanotubes with randomly located vacancy defects. J Nanosci Nanotechnol 7: 4478–4485. doi: 10.1166/jnn.2007.862
    [14] Tserpes KI, Papanikos P (2005) Finite element modeling of single-walled carbon nanotubes. Compos Part B-Eng 36: 468–477. doi: 10.1016/j.compositesb.2004.10.003
    [15] Rafiee R, Heidarhaei M (2012) Investigation of chirality and diameter effects on the Young's modulus of carbon nanotubes using non-linear potentials. Compos Struct 94: 2460–2464. doi: 10.1016/j.compstruct.2012.03.010
    [16] Sakharova NA, Pereira AFG, Antunes JM, et al. (2015) Mechanical characterization of single-walled carbon nanotubes: Numerical simulation study. Compos Part B-Eng 75: 73–85. doi: 10.1016/j.compositesb.2015.01.014
    [17] Rafiee R, Moghadam RM (2014) On the modelling of carbon nanotubes: A critical review. Compos Part B-Eng 56: 435–449. doi: 10.1016/j.compositesb.2013.08.037
    [18] Yengejeh SI, Kazemi SA, Öchsner A (2016) Advances in mechanical analysis of structurally and atomically modified carbon nanotubes and degenerated nanostructures: A review. Compos Part B-Eng 86: 95–107. doi: 10.1016/j.compositesb.2015.10.006
    [19] Dresselhaus MS, Dresselhaus G, Saito R (1995) Physics of carbon nanotubes. Carbon 33: 883–891. doi: 10.1016/0008-6223(95)00017-8
    [20] Barros EB, Jorio A, Samsonidze GG, et al. (2006) Review on the symmetry-related properties of carbon nanotubes. Phys Rep 431: 261–302. doi: 10.1016/j.physrep.2006.05.007
    [21] Melchor S, Dobado JA (2004) CoNTub: An algorithm for connecting two arbitrary carbon nanotubes. J Chem Inf Comp Sci 44: 1639–1646.
    [22] Ghavamian A, Andriyana A, Chin AB, et al. (2015) Numerical investigation on the influence of atomic defects on the tensile and torsional behavior of hetero-junction carbon nanotubes. Mater Chem Phys 164: 122–137. doi: 10.1016/j.matchemphys.2015.08.033
    [23] Yao YG, Li QW, Zhang J, et al. (2007) Temperature-mediated growth of single-walled carbon-nanotube intramolecular junctions. Nat Mater 6: 283–286.
    [24] Li M, Kang Z, Li R, et al. (2013) A molecular dynamics study on tensile strength and failure modes of carbon nanotube junctions. J Phys D Appl Phys 46: 495301. doi: 10.1088/0022-3727/46/49/495301
    [25] Sakharova NA, Pereira AFG, Antunes JM, et al. (2016) Numerical simulation of the mechanical behaviour of single-walled carbon nanotubes heterojunctions. J Nano Res 38: 73–87. doi: 10.4028/www.scientific.net/JNanoR.38.73
    [26] Qin Z, Qin QH, Feng XQ (2008) Mechanical property of carbon nanotubes with intramolecular junctions: Molecular dynamics simulations. Phys Lett A 372: 6661–6666. doi: 10.1016/j.physleta.2008.09.010
    [27] Lu Q, Bhattacharya B (2005) The role of atomistic simulations in probing the small scale aspects of fracture-a case study on a single-walled carbon nanotube. Eng Fract Mech 72: 2037–2071. doi: 10.1016/j.engfracmech.2005.01.009
    [28] Yakobson BI, Brabec CJ, Bernholc J (1996) Nanomechanics of carbon tubes: instabilities beyond linear response. Phys Rev Lett 76: 2511–2514. doi: 10.1103/PhysRevLett.76.2511
    [29] Lu JP (1997) Elastic properties of carbon nanotubes and nanoropes. Phys Rev Lett 79: 1298–1300.
    [30] Jin Y, Yuan FG (2003) Simulation of elastic properties of single-walled carbon nanotubes. Compos Sci Technol 63: 1507–1515. doi: 10.1016/S0266-3538(03)00074-5
    [31] Liew KM, He XQ, Wong CH (2004) On the study of elastic and plastic properties of multi-walled carbon nanotubes under axial tension using molecular dynamics simulation. Acta Mater 52: 2521–2527. doi: 10.1016/j.actamat.2004.01.043
    [32] Bao WX, Zhu CC, Cui WZ (2004) Simulation of Young's modulus of single-walled carbon nanotubes by molecular dynamics. Physica B 352: 156–163. doi: 10.1016/j.physb.2004.07.005
    [33] Zhang HW, Wang JB, Guo X (2005) Predicting the elastic properties of single-walled carbon nanotubes. J Mech Phys Solids 53: 1929–1950. doi: 10.1016/j.jmps.2005.05.001
    [34] Cheng HC, Liu YL, Hsu YC, et al. (2009) Atomistic continuum modelling for mechanical properties of single-walled carbon nanotubes. Int J Solids Struct 46: 1695–1704. doi: 10.1016/j.ijsolstr.2008.12.013
    [35] Kudin KN, Scuseria GE, Yakobson BI (2001) C2F, BN and C nanoshell elasticity from ab initio computations. Phys Rev B 64: 235406. doi: 10.1103/PhysRevB.64.235406
    [36] Wilmes AA, Pinho ST (2014) A coupled mechanical-charge/dipole molecular dynamics finite element method, with multi-scale applications to the design of graphene nano-devices. Int J Numer Meth Eng 100: 243–276. doi: 10.1002/nme.4706
    [37] Hernandez E, Goze C, Bernier P, et al. (1998) Elastic properties of C and BxCyNz composite nanotubes. Phys Rev Lett 80: 4502–4505. doi: 10.1103/PhysRevLett.80.4502
    [38] Zhou X, Zhou J, Ou-Yang ZC (2000) Strain energy and Young's modulus of single-wall carbon nanotubes calculated from electronic energy-band theory. Phys Rev B 62: 13692–13696. doi: 10.1103/PhysRevB.62.13692
    [39] Ru CQ (2000) Effective bending stiffness of carbon nanotubes. Phys Rev B 62: 9973–9976.
    [40] Pantano A, Parks DM, Boyce MC (2004) Mechanics of deformation of single- and multi-wall carbon nanotubes. J Mech Phys Solids 52: 789–821. doi: 10.1016/j.jmps.2003.08.004
    [41] Kalamkarov AL, Georgiades AV, Rokkam SK, et al. (2006) Analytical and numerical techniques to predict carbon nanotubes properties. Int J Solids Struct 43: 6832–6854. doi: 10.1016/j.ijsolstr.2006.02.009
    [42] Muc A (2010) Design and identification methods of effective mechanical properties for carbon nanotubes. Mater Design 31: 1671–1675. doi: 10.1016/j.matdes.2009.03.046
    [43] Chang TC (2010) A molecular based anisotropic shell model for single-walled carbon nanotubes. J Mech Phys Solids 58: 1422–1433. doi: 10.1016/j.jmps.2010.05.004
    [44] Sears A, Batra RC (2004) Macroscopic properties of carbon nanotubes from molecular-mechanics simulations. Phys Rev B 69: 235406. doi: 10.1103/PhysRevB.69.235406
    [45] Gupta SS, Batra RC (2008) Continuum structures equivalent in normal mode vibrations to single-walled carbon nanotubes. Comp Mater Sci 43: 715–723.
    [46] Wang Q (2004) Effective in-plane stiffness and bending rigidity of armchair and zigzag carbon nanotubes. Int J Solids Struct 41: 5451–5461. doi: 10.1016/j.ijsolstr.2004.05.002
    [47] Arash B, Wang Q (2012) A review on the application of nonlocal elastic models in modelling of carbon nanotubes and graphenes. Comp Mater Sci 51: 303–313. doi: 10.1016/j.commatsci.2011.07.040
    [48] Odegard GM, Gates TS, Nicholson LM, et al. (2002) Equivalent continuum modelling of nano-structured materials. Compos Sci Technol 62: 1869–1880. doi: 10.1016/S0266-3538(02)00113-6
    [49] Li C, Chou TW (2003) A structural mechanics approach for the analysis of carbon nanotubes. Int J Solids Struct 40: 2487–2499. doi: 10.1016/S0020-7683(03)00056-8
    [50] Ghavamian A, Rahmandoust M, Öchsner A (2013) On the determination of the shear modulus of carbon nanotubes. Compos Part B-Eng 44: 52–59. doi: 10.1016/j.compositesb.2012.07.040
    [51] Chen WH, Cheng HC, Liu YL (2010) Radial mechanical properties of single-walled carbon nanotubes using modified molecular structure mechanics. Comp Mater Sci 47: 985–993. doi: 10.1016/j.commatsci.2009.11.034
    [52] Eberhardt O, Wallmersperger T (2015) Energy consistent modified molecular structural mechanics model for the determination of the elastic properties of single wall carbon nanotubes. Carbon 95: 166–180. doi: 10.1016/j.carbon.2015.07.092
    [53] Natsuki T, Tantrakarn K, Endo M (2004) Prediction of elastic properties for single-walled carbon nanotubes. Carbon 42: 39–45. doi: 10.1016/j.carbon.2003.09.011
    [54] Meo M, Rossi M (2006) Prediction of Young's modulus of single wall carbon nanotubes by molecular-mechanics based finite element modeling. Compos Sci Technol 66: 1597–1605. doi: 10.1016/j.compscitech.2005.11.015
    [55] Giannopoulos GI, Kakavas PA, Anifantis NK (2008) Evaluation of the effective mechanical properties of single-walled carbon nanotubes using a spring based finite element approach. Comp Mater Sci 41: 561–569. doi: 10.1016/j.commatsci.2007.05.016
    [56] Wernik JM, Meguid SA (2010) Atomistic-based continuum modelling of the nonlinear behavior of carbon nanotubes. Acta Mech 212: 167–179. doi: 10.1007/s00707-009-0246-4
    [57] Ranjbartoreh AZ, Wang G (2010) Consideration of mechanical properties of single-walled carbon nanotubes under various loading conditions. J Nanopart Res 12: 537–543. doi: 10.1007/s11051-009-9808-6
    [58] Parvaneh V, Shariati M (2011) Effect of defects and loading on prediction of Young's modulus of SWCNTs. Acta Mech 216: 281–289. doi: 10.1007/s00707-010-0373-y
    [59] Mahmoudinezhad E, Ansari R, Basti A, et al. (2012) An accurate spring-mass model for predicting mechanical properties of single-walled carbon nanotubes. Comp Mater Sci 62: 6–11. doi: 10.1016/j.commatsci.2012.05.004
    [60] To CWS (2006) Bending and shear moduli of single-walled carbon nanotubes. Finite Elem Anal Design 42: 404–413. doi: 10.1016/j.finel.2005.08.004
    [61] Papanikos P, Nikolopoulos DD, Tserpes KI (2008) Equivalent beams for carbon nanotubes. Comp Mater Sci 43: 345–352.
    [62] Ávila AF, Lacerda GSR (2008) Molecular mechanics applied to single-walled carbon nanotubes. Mater Res 11: 325–333. doi: 10.1590/S1516-14392008000300016
    [63] Shokrieh MM, Rafiee R (2010) Prediction of Young's modulus of graphene sheets and carbon nanotubes using nanoscale continuum mechanics approach. Mater Design 31: 790–795. doi: 10.1016/j.matdes.2009.07.058
    [64] Her SC, Liu SJ (2012) Theoretical prediction of tensile behavior of single-walled carbon nanotubes. Curr Nanosci 8: 42–46. doi: 10.2174/1573413711208010042
    [65] Lu X, Hu Z (2012) Mechanical property evaluation of single-walled carbon nanotubes by finite element modeling. Compos Part B-Eng 43: 1902–1913. doi: 10.1016/j.compositesb.2012.02.002
    [66] Mohammadpour E, Awang M (2011) Predicting the nonlinear tensile behavior of carbon nanotubes using finite element simulation. Appl Phys A-Mater 104: 609–614.
    [67] Ghadyani G, Öchsner A (2015) Derivation of a universal estimate for the stiffness of carbon nanotubes. Physica E 73: 116–125. doi: 10.1016/j.physe.2015.05.024
    [68] Giannopoulos GI, Tsiros AP, Georgantzinos SK (2013) Prediction of Elastic Mechanical Behavior and Stability of Single-Walled Carbon Nanotubes Using Bar Elements. Mech Adv Mater Struct 20: 730–741. doi: 10.1080/15376494.2012.676714
    [69] Nasdala L, Ernst G (2005) Development of a 4-node finite element for the computation of nano-structured materials. Comp Mater Sci 33: 443–458. doi: 10.1016/j.commatsci.2004.09.047
    [70] Budyka MF, Zyubina TS, Ryabenko AG, et al. (2005) Bond lengths and diameters of armchair single wall carbon nanotubes. Chem Phys Lett 407: 266–271. doi: 10.1016/j.cplett.2005.03.088
    [71] Ghadyani G, Öchsner A (2015) On a thickness free expression for the stiffness of carbon nanotubes. Solid State Commun 209: 38–44.
    [72] Pereira AFG, Antunes JM, Fernandes JV, et al. (2016) Shear modulus and Poisson's ratio of single-walled carbon nanotubes: numerical evaluation. Phys Status Solidi B 253: 366–376. doi: 10.1002/pssb.201552320
    [73] Krishnan A, Dujardin E, Ebbesen TW, et al. (1998) Young's modulus of single-walled nanotubes. Phys Rev B 58: 14013–14018. doi: 10.1103/PhysRevB.58.14013
    [74] Yu MF, Files BS, Arepalli S, et al. (2000) Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett 84: 5552–5554. doi: 10.1103/PhysRevLett.84.5552
    [75] Shen L, Li J (2004) Transversely isotropic elastic properties of single-walled carbon nanotubes. Phys Rev B 69: 045414. doi: 10.1103/PhysRevB.69.045414
    [76] Ghadyani G, Soufeiani L, Ӧchsner A (2017) Angle dependence of the shear behaviour of asymmetric carbon nanotubes. Mater Design 116:136–143. doi: 10.1016/j.matdes.2016.11.097
    [77] Xiao JR, Gama BA, Gillespie Jr JW (2005) An analytical molecular structural mechanics model for the mechanical properties of carbon nanotubes. Int J Solids Struct 42: 3075–3092. doi: 10.1016/j.ijsolstr.2004.10.031
    [78] Wu Y, Zhang X, Leung AYT, et al. (2006) An energy-equivalent model on studying the mechanical properties of single-walled carbon nanotubes. Thin Wall Struct 44: 667–676. doi: 10.1016/j.tws.2006.05.003
    [79] Rahmandoust M, Öchsner A (2012) On finite element modeling of single- and multi-walled carbon nanotubes. J Nanosci Nanotechnol 12: 8129–8136. doi: 10.1166/jnn.2012.4521
    [80] Domínguez-Rodríguez G, Tapia A, Avilés F (2014) An assessment of finite element analysis to predict the elastic modulus and Poisson's ratio of singlewall carbon nanotubes. Comp Mater Sci 82: 257–263. doi: 10.1016/j.commatsci.2013.10.003
    [81] Popov VN, Van Doren VE, Balkanski M (2000) Elastic Properties of single-walled carbon nanotubes. Phys Rev B 61: 3078–3084.
    [82] Gao RP, Wang ZL, Bai ZG, et al. (2000) Nanomechanics of individual carbon nanotubes from pyrolytically grown arrays. Phys Rev Lett 85: 622–625. doi: 10.1103/PhysRevLett.85.622
    [83] Andrews R, Jacques D, Qian D, et al. (2001) Purification and structural annealing of multiwalled carbon nanotubes at graphitization temperatures. Carbon 39: 1681–1687. doi: 10.1016/S0008-6223(00)00301-8
    [84] Terrones M, Banhart F, Grobert N, et al. (2002) Molecular junctions by joining single-walled carbon nanotubes. Phys Rev Lett 89: 075505. doi: 10.1103/PhysRevLett.89.075505
    [85] Scarpa F, Adhikari S, Wang CY (2009) Mechanical properties of non-reconstructed defective single-wall carbon nanotubes. J Phys D Appl Phys 42: 142002. doi: 10.1088/0022-3727/42/14/142002
    [86] Parvaneh V, Shariati M, Torabi H (2012) Bending buckling behavior of perfect and defective single-walled carbon nanotubes via a structural mechanics model. Acta Mech 223: 2369–2378. doi: 10.1007/s00707-012-0711-3
    [87] Rahmandoust M, Öchsner A (2009) Influence of structural imperfections and doping on the mechanical properties of single-walled carbon nanotubes. J Nano Res 6: 185–196. doi: 10.4028/www.scientific.net/JNanoR.6.185
    [88] Ghavamian A, Rahmandoust M, Öchsner A (2012) A numerical evaluation of the influence of defects on the elastic modulus of single and multi-walled carbon nanotubes. Comp Mater Sci 62: 110–116. doi: 10.1016/j.commatsci.2012.05.003
    [89] Ghavamian A, Öchsner A (2012) Numerical investigation on the influence of defects on the buckling behavior of single-and multi-walled carbon nanotubes. Physica E 46: 241–249. doi: 10.1016/j.physe.2012.08.002
    [90] Ghavamian A, Öchsner A (2013) Numerical modeling of eigenmodes and eigenfrequencies of single- and multi-walled carbon nanotubes under the influence of atomic defects. Comp Mater Sci 72: 42–48. doi: 10.1016/j.commatsci.2013.02.002
    [91] Poelma RH, Sadeghian H, Koh S, et al. (2012) Effects of single vacancy defect position on the stability of carbon nanotubes. Microelectron Reliab 52: 1279–1284. doi: 10.1016/j.microrel.2012.03.015
    [92] Sakharova NA, Pereira AFG, Antunes JM, et al. (2016) Numerical simulation study of the elastic properties of single-walled carbon nanotubes containing vacancy defects. Compos Part B-Eng 89: 155–168. doi: 10.1016/j.compositesb.2015.11.029
    [93] Sakharova NA, Antunes JM, Pereira AFG, et al. (2015) The effect of vacancy defects on the evaluation of the mechanical properties of single-wall carbon nanotubes: Numerical simulation study, In: Öchsner A, Altenbach H, Springer Book Series On Advanced Structured Materials: Mechanical and Materials Engineering of Modern Structure and Component Design, Germany: Springer, 70: 323–339.
    [94] Wong CH (2010) Elastic properties of imperfect single-walled carbon nanotubes under axial tension. Comp Mater Sci 49: 143–147. doi: 10.1016/j.commatsci.2010.04.037
    [95] Rafiee R, Pourazizi R (2014) Evaluating the Influence of Defects on the Young's Modulus of Carbon Nanotubes Using Stochastic Modeling. Mater Res 17: 758–766. doi: 10.1590/S1516-14392014005000071
    [96] Zhang YP, Ling CC, Li GX, et al. (2015) Radial collapse and physical mechanism of carbon nanotube with divacancy and 5-8-5 defects. Chinese Phys B 24: 046401. doi: 10.1088/1674-1056/24/4/046401
    [97] Rafiee R, Mahdavi M (2016) Molecular dynamics simulation of defected carbon nanotubes. P I Mech Eng L-J Mat 230: 654–662.
    [98] Sharma S, Chandra R, Kumar P, et al. (2014) Effect of Stone-Wales and vacancy defects on elastic moduli of carbon nanotubes and their composites using molecular dynamics simulation. Comp Mater Sci 86: 1–8. doi: 10.1016/j.commatsci.2014.01.035
    [99] Saxena KK, Lal A (2012) Comparative molecular dynamics simulation study of mechanical properties of carbon nanotubes with number of Stone-Wales and vacancy defects. Procedia Eng 38: 2347–2355. doi: 10.1016/j.proeng.2012.06.280
    [100] Yuan J, Liew KM (2009) Effects of vacancy defect reconstruction on the elastic properties of carbon nanotubes. Carbon 47: 1526–1533. doi: 10.1016/j.carbon.2009.01.048
    [101] Xiao S, Hou W (2006) Fracture of vacancy-defected carbon nanotubes and their embedded nanocomposites. Phys Rev B 73: 115406. doi: 10.1103/PhysRevB.73.115406
    [102] Kurita H, Estili M, Kwon H, et al. (2015) Load-bearing contribution of multi-walled carbon nanotubes on tensile response of aluminium. Compos Part A-Appl S 68: 133–139.
    [103] Kharissova OV, Kharisov BI (2014) Variations of interlayer spacing in carbon nanotubes. RSC Adv 58: 30807–30815.
    [104] Kiang CH, Endo M, Ajayan PM, et al. (1998) Size effects in carbon nanotubes. Phys Rev Lett 81: 1869–1872. doi: 10.1103/PhysRevLett.81.1869
    [105] Li C, Chou TW (2003) Elastic moduli of multi-walled carbon nanotubes and the effect of van der Waals forces. Comp Sci Tech 63: 1517–1524. doi: 10.1016/S0266-3538(03)00072-1
    [106] Fan CW, Liu YY, Hwu C (2009) Finite element simulation for estimating the mechanical properties of multi-walled carbon nanotubes. Appl Phys A-Mater 5: 819–831.
    [107] Nahas MN, Abd-Rabou M (2010) Finite element modeling of multi-walled carbon nanotubes. Int J Eng Technol 10: 63–71.
    [108] Sakharova NA, Pereira AFG, Antunes JM, et al. (2017) Numerical simulation on the mechanical behaviour of the multi-walled carbon nanotubes. J Nano Res 47: 106–119. doi: 10.4028/www.scientific.net/JNanoR.47.106
    [109] Liu Q, Liu W, Cui ZM, et al. (2007) Synthesis and characterization of 3D double branched K junction carbon nanotubes and nanorods. Carbon 45: 268–273. doi: 10.1016/j.carbon.2006.09.029
    [110] Scarpa F, Narojczyk JW, Wojciechowski KW (2011) Unusual deformation mechanisms in carbon nanotube heterojunctions (5, 5)–(10, 10) under tensile loading. Phys Status Solidi B 248: 82–87. doi: 10.1002/pssb.201083984
    [111] Lee WJ, Su WS (2013) Investigation into the mechanical properties of single-walled carbon nanotube heterojunctions. Phys Chem Chem Phys 15: 11579–11585. doi: 10.1039/c3cp51340h
    [112] Kang Z, Li M, Tang Q (2010) Buckling behavior of carbon nanotube-based intramolecular junctions under compression: Molecular dynamics simulation and finite element analysis. Comp Mater Sci 50: 253–259. doi: 10.1016/j.commatsci.2010.08.011
    [113] Kinoshita Y, Murashima M, Kawachi M, et al. (2013) First-principles study of mechanical properties of one-dimensional carbon nanotube intramolecular junctions. Comp Mater Sci 70: 1–7. doi: 10.1016/j.commatsci.2012.12.033
    [114] Xi H, Song HY, Zou R (2015) Simulation of mechanical properties of carbon nanotubes with superlattice structure. Curr Appl Phys 15: 1216–1221. doi: 10.1016/j.cap.2015.07.008
    [115] Yengejeh SI, Zadeh MA, Öchsner A (2014) On the buckling behavior of connected carbon nanotubes with parallel longitudinal axes. Appl Phys A-Mater 115: 1335–1344. doi: 10.1007/s00339-013-7999-2
    [116] Ghavamian A, Öchsner A (2015) A comprehensive numerical investigation on the mechanical properties of hetero-junction carbon nanotubes. Commun Theor Phys 64: 215–230. doi: 10.1088/0253-6102/64/2/215
    [117] Hemmatian H, Fereidoon A, Rajabpour M (2014) Mechanical properties investigation of defected, twisted, elliptic, bended and hetero-junction carbon nanotubes based on FEM. Fuller Nanotub Car N 22: 528–544. doi: 10.1080/1536383X.2012.684183
    [118] Rajabpour M, Hemmatian H, Fereidoon A (2011) Investigation of Length and Chirality Effects on Young's Modulus of Heterojunction Nanotube with FEM. Proceedings of the 2nd International Conference on Nanotechnology: Fundamentals and Applications, Ottawa, Ontario, Canada.
    [119] Yengejeh SI, Zadeh MA, Öchsner A (2015) On the tensile behavior of hetero-junction carbon nanotubes. Compos Part B-Eng 75: 274–280. doi: 10.1016/j.compositesb.2015.02.001
    [120] Yengejeh SI, Zadeh MA, Öchsner A (2014) Numerical characterization of the shear behavior of hetero-junction carbon nanotubes. J Nano Res 26: 143–151.
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5286) PDF downloads(1064) Cited by(12)

Article outline

Figures and Tables

Figures(8)  /  Tables(7)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog