Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Assessment of the interaction between three collinear unequal straight cracks with unified yield zones

Department of Mathematics, Jamia Millia Islamia, New Delhi-110 025, India

Special Issues: Interaction of Multiple Cracks in Metallic Components-Volume 2

The Dugdale model has been modified in the paper to include the effect of linearly varying yield stress distribution. An isotropic infinite plate is considered with three collinear unequal straight cracks with coalesced yield zones. Muskhelishvili’s complex variable approach is used to solve the problem. Closed form analytical expressions for stress intensity factor and crack tip opening displacement at each crack tip are obtained when boundary of the plate is subjected to uniform stress distribution and developed yield zones are assumed variable stress distribution. Different yield zone lengths and crack tip opening displacements are observed at each crack tip. A comparative case with the solution of two equal cracks is studied to show that the problem considered in this paper is the predecessor of the two equal cracks problem.
  Figure/Table
  Supplementary
  Article Metrics

Keywords multiple-site damage; stress intensity factor; yield zone length; Dugdale strip yield model; crack-tip opening displacement

Citation: N. Akhtar, S. Hasan. Assessment of the interaction between three collinear unequal straight cracks with unified yield zones. AIMS Materials Science, 2017, 4(2): 302-316. doi: 10.3934/matersci.2017.2.302

References

  • 1. Broek D (1982) Elementary Engineering Fracture Mechanics, The Netherlands: Martinus Nijhoff.
  • 2. Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8: 100–104.
  • 3. Kanninen MF (1970) A solution for a Dugdale crack subjected to a linearly varying tensile loading. Int J Eng Sci 8: 85–95.
  • 4. Harrop LP (1978) Application of a modified Dugdale model to the K vs COD relation. Eng Fract Mech 10: 807–816.
  • 5. Chang D, Kotousov A (2012) A strip yield model for two collinear cracks in plates of arbitrary thickness. Int J Fracture 176: 39–47.
  • 6. Collins RA, Cartwright DJ (2001) An analytical solution for two equal-length collinear strips yield cracks. Eng Fract Mech 68: 915–924.
  • 7. Chang Dh, Kotousov A (2012) A strip yield model for two collinear cracks. Eng Fract Mech 90: 121–128.
  • 8. Hasan S, Akhtar N (2015) Dugdale model for three equal collinear straight cracks: An analytical approach. Theor Appl Fract Mec 78: 40–50.
  • 9. Hasan S, Akhtar N (2015) Mathematical model for three equal collinear straight cracks: A modified Dugdale approach. Strength Fract Complex 9: 211–232.
  • 10. Nishimura T (1999) Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet. ASME J Eng Mater Technol 121: 352–359.
  • 11. Hasan S (2015) Dugdale model for three unequal collinear straight cracks with coalesced yield zones: a complex variable approach. Int J Pure Ap Mat 105: 311–323.
  • 12. Gdoutos EE (2005) Fracture Mechanics–An Introduction, Springer.
  • 13. Tang XS, Gao CH (2014) Macro–micro dual scale crack model linked by a restraining stress zone with a linear distribution. Theor Appl Fract Mec 71: 31–43.
  • 14. Hasan S (2016) Modified Dugdale model for four collinear straight cracks with coalesced yield zones. Theor Appl Fract Mec 85: 227–235.
  • 15. Tada H, Paris PC, Erwin GR (2000) The Stress Analysis of Cracks Handbook, New York: ASME Press.
  • 16. Muskhelishvili NI (1963) Some Basic Problems of Mathematical Theory of Elasticity,Leiden: P. Noordhoff.
  • 17. Byrd PF, Friedman MD (1971) Handbook of Elliptical Integrals for Engineers and Scientists, New York Heidelberg Berlin: Springer-Verlag.
  • 18. Feng XQ, Gross D (2000) On the coalescence of collinear cracks in quasi-brittle materials. Eng Fract Mech 65: 511–524.

 

Reader Comments

your name: *   your email: *  

Copyright Info: 2017, N. Akhtar, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved