Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Precipitation of the metastable phases in a tin microalloyed Al-10at%Ag alloy

Solids solutions laboratory, physics faculty USTHB, BP 32, El-Alia, Algiers, Algeria

The formation of the metastable phases in aluminium alloys is closely linked with the excess vacancies. Traces of tin added to an Al-Ag alloy exert an influence on the precipitation kinetics. In the quenched Al-Ag alloys, the precipitation is controlled by the diffusion of solute atoms which require the presence of free vacancies. Due to their high binding energy with vacancies, tin atoms modify the nucleation and growth characteristics of the phases which form during precipitation. Tin atoms retard the precipitation of the Guinier-Preston zones at 90, 125 and 150 °C, suppresses it at 170 and 200 °C and, at all temperatures, stimulate the precipitation of the metastable γ’ phase.
  Figure/Table
  Supplementary
  Article Metrics

Keywords Al-Ag alloys; Sn addition; metastable phases; precipitation; hardening

Citation: Faiza Lourdjane, Mouhyddine Kadi-Hanifi, Azzeddine Abderrahmane Raho. Precipitation of the metastable phases in a tin microalloyed Al-10at%Ag alloy. AIMS Materials Science, 2017, 4(1): 1-15. doi: 10.3934/matersci.2017.1.1

References

  • 1. Inoke K, Kaneko K (2006) Severe local strain and the plastic deformation of Guinier Preston zones in the Al-Ag system revealed by three-dimensional electron tomography. Acta Mater 54: 2957–2963.    
  • 2. El-Khalek AMA (2008) Transformation characteristics of Al-Ag and Al-Ag-Ti alloys. J Alloy Compd 459: 281–285.    
  • 3. Dubey PA (1991) Shape and internal structure of Guinier-Preston zones in Al-Ag. Acta Metall Mater 39: 1161–1170.
  • 4. Schönfeld B, et al. (1997) Guinier-Preston zones in Al-rich Al-Cu and Al-Ag single crystals. Physica B 234: 983–985.
  • 5. Kimura H, Hasiguti RK (1961) Interaction of vacancies with Sn atoms and the rate of GP zone formation in an Al-Cu-Sn alloy. Acta Metall 9: 1076–1078.    
  • 6. Nuyten JBM (1967) Quenched structures and precipitation in Al-Cu alloys with and without trace additions of Cd. Acta Metall 15: 1765–1770.    
  • 7. Noble B (1968) Theta-prime precipitation in aluminium-copper-cadmium alloys. Acta Metall 16: 393–401.    
  • 8. Ozbilen O, Flower HM (1989) Zirconium-vacancy binding and its influence on S’ precipitation in an Al-Cu-Mg alloy. Acta Metall 37: 2993–3000.    
  • 9. Mukhopadhyay AK, et al. (1990) Role of vacancies on the precipitation processes in Zr modified aluminium based alloys. Scripta Metall Mater 24: 307–312.    
  • 10. Federighi T (1958) Quenched-in vacancies and rate of formation of zones in aluminum alloys. Acta Metall 6: 379–381.    
  • 11. Federighi T, Thomas G (1962) The interaction between vacancies and zones and the kinetics of pre-precipitation in Al-rich alloys. Phil Mag 7: 127–131.    
  • 12. Girifalco LA, Herman H (1965) A model for the growth of Guinier-Preston zones-the vacancy pump. Acta Metall 13: 583–590.    
  • 13. Nelson JB, Riley DB (1945) An experimental investigation of extrapolation methods in the derivation of accurate unit-cell dimensions of crystals. Proceedings of the Physical Society 57: 160–177.    
  • 14. Guo Z, Sha W (2005) Quantification of precipitate fraction in Al-Si-Cu alloys. Mater Sci Eng A 392: 449–452.
  • 15. Waterloo G, Hansen V, Gjonnes J, et al. (2001) Effect of predeformation and preaging at room temperaure in Al-Zn-Mg-(Cu, Zr) alloys. Mater Sci Eng A 303: 226–233.    
  • 16. Wang G (2007) Influence of Cu content on ageing behavior of AlSiMgCu cast alloys. Mater Design 28: 1001–1005.    
  • 17. Novelo-Peralta O (2007) Characterization of precipitation in Al-Mg-Cu alloys by X-ray diffraction peak broadening analysis. Mater Charact 59: 773–780.
  • 18. Shokuhfar A (2009) Mechanisms of precipitates formation in an Al-Cu-Li-Zr alloy using DSC technique and electrical resistance measurements. Iran J Mater Sci Eng 6: 15–20.
  • 19. Anjabin N, Taheri AK (2010) The effect of aging treatment on mechanical properties of AA6082 alloy: modelling experiment. Iran J Mater Sci Eng 7: 14–21.
  • 20. Hashimoto F, Ohta M (1964) Interaction between a Vacancy and an Si, Ge or Sn Atom in Al-10wt%Zn Alloys. J Phys Soc Jpn 19: 1331–1336.    
  • 21. Ohta M, Hashimoto F (1964) Interaction between a Vacancy and a Cd or In Atom in Al-10wt%Zn Alloys. J Phys Soc Jpn 19: 1987–1987.
  • 22. Hashimoto F (1965) Interaction between a Vacancy and an Ag Atom in Aluminium. J Phys Soc Jpn 20: 336–346.    
  • 23. Fiorito G, Ceresara S, Federighi T (1966) Interaction between vacancies and Sn atoms in cold-worked Al-Sn alloys. Acta Metall 14: 452–454    
  • 24. Kimura H, Hasiguti RR (1963) Proc. Int. Conf. Cryst. Latt. Def. (1962). J Phys Soc Jpn 18: 73.
  • 25. Silcock JM (1955) The structural ageing characteristics of ternary aluminium-copper alloys with cadmium, indium or tin. J I Met 84: 23–31.
  • 26. Sankaran R, Laird C (1974) Effect of trace additions Cd, In and Sn on the interfacial structure and kinetics of growth of θ’ plates in Al-Cu alloy. Mater Sci Eng 14: 271–279.    
  • 27. Schueller RD, Wawner FE (1994) Nucleation mechanism of the cubic σ-phase in squeeze-cast aluminium matrix composites. J Mater Sci 29: 424–435.    
  • 28. Merlin J, Merle P (1978) Anelastic phenomena and structural state in aluminium silver alloys. Scripta Metal 12: 227–232.    
  • 29. Johnson WA, Mehl RF (1939) Reaction kinetics in processes of nucleation and growth. Trans Amer Inst Mining (Metal) Engrs 135: 416–458
  • 30. Avrami M (1941) Kinetics of phase change. III: Granulation, Phase Change and Microstructure. J Chem Phys 9: 177–184.
  • 31. Kolmogorov AN (1937) On the statistical theory of the crystallization of metals. Bull Acad Sci USSR, Math Ser 1: 355–359.
  • 32. Esmaeili S, Lloyd DJ, Poole WJ (2003) A yield strength model for the Al-Mg-Si-Cu alloy AA6111. Acta Mater 51: 2243–2257.    
  • 33. Sofyan BT (2001) Effects of microalloying with Cd and Ag on the precipitation process of Al-4Cu-0.3Mg(wt%) alloy at 200 °C. Micron 32: 851–856.

 

This article has been cited by

  • 1. Asadullah Madni, Sobia Noreen, Irsah Maqbool, Faizza Rehman, Amna Batool, Prince Muhammad Kashif, Mubashar Rehman, Nayab Tahir, Muhammad Imran Khan, Graphene-based nanocomposites: synthesis and their theranostic applications, Journal of Drug Targeting, 2018, 1, 10.1080/1061186X.2018.1437920
  • 2. Haidong Fan, Alfonso H.W. Ngan, Kefu Gan, Jaafar A. El-Awady, Origin of double-peak precipitation hardening in metallic alloys, International Journal of Plasticity, 2018, 10.1016/j.ijplas.2018.07.016

Reader Comments

your name: *   your email: *  

Copyright Info: 2017, Azzeddine Abderrahmane Raho, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved