Citation: Jui-Hung Chang, Weihan Wu. Evaluation of effective hyperelastic material coefficients for multi-defected solids under large deformation[J]. AIMS Materials Science, 2016, 3(4): 1773-1795. doi: 10.3934/matersci.2016.4.1773
[1] | Nemat-Nasser S, Yu S, Hori M (1993) Solids with periodically distributed cracks. Int J Solids Struct 30: 2071–2095. doi: 10.1016/0020-7683(93)90052-9 |
[2] | Kachanov M (1992) Effective elastic properties of cracked solids: critical review of some basic concepts. Appl Mech Rev 45: 304–335. doi: 10.1115/1.3119761 |
[3] | Petrova V, Tamuzs V, Romalis N (2000) A survey of macro-microcrack interaction problems. Appl Mech Rev 53: 1459–1472. |
[4] | Shen L, Li J (2004) A numerical simulation for effective elastic moduli of plates with various distributions and sizes of cracks. Int J Solids Struct 41: 7471–7492. doi: 10.1016/j.ijsolstr.2004.02.016 |
[5] | Jasiuk I (1995) Cavities vis-a-vis rigid inclusions: Elastic moduli of materials with polygonal inclusions. Int J Solids Struct 32: 407–422. doi: 10.1016/0020-7683(94)00119-H |
[6] | Nozaki H, Taya M (2001) Elastic fields in a polyhedral inclusion with uniform eigenstrains and related problems. J Appl Mech 68: 441–452. doi: 10.1115/1.1362670 |
[7] | Tsukrov I, Novak J (2004) Effective elastic properties of solids with two-dimensional inclusions of irregular shapes. Int J Solids Struct 41: 6905–6924. doi: 10.1016/j.ijsolstr.2004.05.037 |
[8] | Chang JH, Liu DY (2009) Damage assesssment for 2-D multi-cracked materials/structures by using Mc-integral. ASCE J Eng Mech 135: 1100–1107. doi: 10.1061/(ASCE)0733-9399(2009)135:10(1100) |
[9] | Miehe C, Schröder J, Schotte J (1999) Computational homogenization analysis in finite plasticity. Simulation of texture development in polycrystalline materials. Comput Method Appl M 171: 387–418. |
[10] | Kouznetsova VG, Brekelmans WAM, Baaijens FPT (2001) An approach to micro-macro modeling of heterogeneous materials. Comput Mech 27: 37–48. doi: 10.1007/s004660000212 |
[11] | Mistler M, Anthoine A, Butenweg C (2007) In-plane and out-of-plane homogenisation of masonry. Comput Struct 85: 1321–1330. doi: 10.1016/j.compstruc.2006.08.087 |
[12] | Shabana YM, Noda N (2008) Numerical evaluation of the thermomechanical effective properties of a functionally graded material using the homogenization method. Int J Solids Struct 45: 3494–3506. doi: 10.1016/j.ijsolstr.2008.02.012 |
[13] | Matous K, Kulkarni MG, Geubelle PH (2008) Multiscale cohesive failure modeling of heterogeneous adhesives. J Mech Phys Solids 56: 1511–1533. doi: 10.1016/j.jmps.2007.08.005 |
[14] | Hirschberger CB, Ricker S, Steinmann P, et al. (2009) Computational multiscale modelling of heterogeneous material layers. Eng Fract Mech 76: 793–812. doi: 10.1016/j.engfracmech.2008.10.018 |
[15] | Pham NKH, Kouznetsova V, Geers MGD (2013) Transient computational homogenization for heterogeneous materials under dynamic excitation. J Mech Phys Solids 61: 2125–2146. doi: 10.1016/j.jmps.2013.07.005 |
[16] | Belytschko T, Xiao SP (2003) Coupling methods for continuum model with molecular model. Int J Multiscale Com 1: 115–126. |
[17] | Liu WK, Park HS, Qian D, et al. (2006) Bridging scale methods for nanomechanics and materials. Comput Method Appl M 195: 1407–1421. doi: 10.1016/j.cma.2005.05.042 |
[18] | Budarapu PR, Gracie R, Bordas S, et al. (2014) An adaptive multiscale method for quasi-static crack growth. Comput Mech 53: 1129–1148. doi: 10.1007/s00466-013-0952-6 |
[19] | Budarapu PR, Gracie R, Shih WY, et al. (2014) Efficient coarse graining in multiscale modeling of fracture. Theor Appl Fract Mec 69: 126–143. doi: 10.1016/j.tafmec.2013.12.004 |
[20] | Talebi H, Silani M, Rabczuk T (2015) Concurrent multiscale modelling of three dimensional crack and dislocation propagation. Adv Eng Softw 80: 82–92. doi: 10.1016/j.advengsoft.2014.09.016 |
[21] | Yang SW, Budarapu PR, Mahapatra DR, et al. (2015) A meshless adaptive multiscale method for fracture. Comp Mater Sci 96: 382–395. doi: 10.1016/j.commatsci.2014.08.054 |
[22] | Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion and related problems. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. The Royal Society, 241: 376–396. |
[23] | Walpole LJ (1969) On the overall elastic moduli of composite materials. J Mech Phys Solids 17: 235–251. doi: 10.1016/0022-5096(69)90014-3 |
[24] | Kachanov M, Tsukrov I, Shafiro B (1994) Effective properties of solids with cavities of various shapes. Appl Mech Rev 47: 151–174. |
[25] | Gasser TC, Ogden RW, Holzapfel GA (2006) Hyperelastic modelling of arterial layers with distributed collagen fibre orientations. J R Soc Interface 3: 15–35. doi: 10.1098/rsif.2005.0073 |
[26] | Ogden RW (1984) Non-Linear Elastic Deformation, Ellis Horwood Limited, England. |