Research article Topical Sections

Electrical and optical properties of hybrid polymer solar cells incorporating Au and CuO nanoparticles

  • Received: 20 August 2015 Accepted: 24 December 2015 Published: 29 December 2015
  • In this study, to enhance the power conversion efficiency (PCE) of the polymer solar cells (PSCs), Gold (Au) and Copper oxide nanoparticles (CuO-NPs) are incorporated into the PEDOT:PSS and P3HT/PCBM active layers respectively. PSCs with a constant CuO-NP content were fabricated with varying amounts of Au NPs. Addition of Au NPs increased the power conversion efficiency by up to 18% compared to a reference cell without Au-NPs. The short circuit current(Jsc) of the cells containing 0.06 mg of Au NPs was measured at 7.491 mA/cm2 compared to 6.484 mA/cm2 in the reference cells with 0.6 mg of CuO nanoparticles; meanwhile, the external quantum efficiency(EQE) increased from 53% to 61%, showing an enhancement of 15.1%. Au-NPs improved the charge collection at the anode, which results in higher short circuit current and fill factor. However, the strong near field surrounding Au-NPs due to localized surface plasmonic resonance (LSPR) effect is not distributed into the active layer. Instead, it is spread horizontally through the PEDOT:PSS layer, thus minimizing the light absorption in the active layer.

    Citation: Aruna P. Wanninayake, Shengyi Li, Benjamin C. Church, Nidal Abu-Zahra. Electrical and optical properties of hybrid polymer solar cells incorporating Au and CuO nanoparticles[J]. AIMS Materials Science, 2016, 3(1): 35-50. doi: 10.3934/matersci.2016.1.35

    Related Papers:

  • In this study, to enhance the power conversion efficiency (PCE) of the polymer solar cells (PSCs), Gold (Au) and Copper oxide nanoparticles (CuO-NPs) are incorporated into the PEDOT:PSS and P3HT/PCBM active layers respectively. PSCs with a constant CuO-NP content were fabricated with varying amounts of Au NPs. Addition of Au NPs increased the power conversion efficiency by up to 18% compared to a reference cell without Au-NPs. The short circuit current(Jsc) of the cells containing 0.06 mg of Au NPs was measured at 7.491 mA/cm2 compared to 6.484 mA/cm2 in the reference cells with 0.6 mg of CuO nanoparticles; meanwhile, the external quantum efficiency(EQE) increased from 53% to 61%, showing an enhancement of 15.1%. Au-NPs improved the charge collection at the anode, which results in higher short circuit current and fill factor. However, the strong near field surrounding Au-NPs due to localized surface plasmonic resonance (LSPR) effect is not distributed into the active layer. Instead, it is spread horizontally through the PEDOT:PSS layer, thus minimizing the light absorption in the active layer.


    加载中
    [1] Abu-Zahra N, Algazzar M (2013) Effect of crystallinity on the performance of P3HT/PC70BM/n-dodecylthiol polymer solar cells. J Sol Energy Eng 136(2):021023.
    [2] Manceau M, Angmo D, Jorgensen M, et al. (2011) ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules. Org Electron 12, 566–574.
    [3] Michael CH, Ali D (2014) Efficient generation of model bulk heterojunction morphologies for organic photovoltaic device modeling. Appl Phys Rev 2: 014008. doi: 10.1103/PhysRevApplied.2.014008
    [4] Choulis SA, Kim Y, Nelson J, et al. (2004) High ambipolar and balanced carrier mobility in regioregular poly (3-hexy thiophene). Appl Phys Rev 85: 3890–3892.
    [5] Ma W, Yang C, Gong X, et al. (2005) Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology. Adv Funct Mater 15: 1617–1622. doi: 10.1002/adfm.200500211
    [6] Liao SH, Jhuo HJ, Yeh PN, et al. (2014) Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer. Sci Rep, 4: 6813: 4–10.
    [7] Raja R, Liu WS, Hsiow CY, et al. (2015) Terthiophene-C60 dyads as donor/acceptor compatibilizers for developing highly stable P3HT/ PCBM bulk heterojunction solar cells. J Mater Chem A 3: 14401–14408. doi: 10.1039/C5TA02953H
    [8] Jung K, Song HJ, Lee G, et al. (2014) Plasmonic organic solar cells employing nanobump assembly via aerosol-derived nanoparticles. ACS Nano 8: 2590-2601. doi: 10.1021/nn500276n
    [9] Deibel C, Dyakonov V (2010) Polymer–fullerene bulk heterojunction solar cells. Rep Prog Phys 3: 9.
    [10] Gunes S, Neugebauer H, Sariciftci NS (2007) Conjugated polymer-based organic solar cells. Chem Rev 107: 1324–1338. doi: 10.1021/cr050149z
    [11] Atwater HA, Polman A (2010) Plasmonics for improved photovoltaic devices. Nat Mater 9: 205–213. doi: 10.1038/nmat2629
    [12] Schuller JA, Barnard ES, Cai W, et al. (2010) Plasmonics for extreme light concentration and manipulation. Nat Mater 9: 193–204. doi: 10.1038/nmat2630
    [13] Mahmoud AY, Izquierdo R, Truong VV (2014) Gold nanorods incorporated cathode for better performance of polymer solar cells. J Nanomater (2014): 464160.
    [14] Brown M, Suteewong T, Kumar R, et al. (2011) Plasmonic dye-sensitized solar cells using core-shell metal-insulator nanoparticles. Nano Lett: 11: 438–445. doi: 10.1021/nl1031106
    [15] Kim SS, Na SI, Jo J, et al. (2008) Plasmon enhanced performance of organic solar cells using electrodeposited Ag nanoparticles. Appl Phys Lett 93: 073307. doi: 10.1063/1.2967471
    [16] Chou SY, Ding W (2013) Ultrathin, high-efficiency, broad-band, omni-acceptance, organic solar cells enhanced by plasmonic cavity with subwavelength hole array. Opt Express 21: 60–76. doi: 10.1364/OE.21.000060
    [17] Chen FC, Wu JL, Lee CL, et al. (2009) Plasmonic-enhanced polymer photovoltaic devices incorporating solution- processable metal nanoparticles. Appl Phys Lett 95: 013305. doi: 10.1063/1.3174914
    [18] Xie F, Choy W, Wang C, et al. (2011) Improving the efficiency of polymer solar cells by incorporating gold nanoparticles into all polymer layers. Appl Phys Lett 99: 153304. doi: 10.1063/1.3650707
    [19] Wang DH, Kim DY, Choi KW, et al. (2011) Enhancement of Donor–Acceptor Polymer Bulk Heterojunction Solar Cell Power Conversion Efficiencies by Addition of Au Nanoparticles. Angew Chem Int Ed 50: 5519–5523. doi: 10.1002/anie.201101021
    [20] Xie F, Choy W, Zhu X, et al. (2011) Improving polymer solar cell performances by manipulating the self-organization of polymer. Appl Phys Lett 98: 243302. doi: 10.1063/1.3599488
    [21] Baek SW, Noh J, Lee CH, et al. (2013) Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method. Nat Sci Rep 3: 1726.
    [22] Chen X, Zuo L, Fu W, et al. (2013) Insight into the efficiency enhancement of polymer solar cells by incorporating gold nanoparticles. Sol Energy Mat Sol 111: 1–8. doi: 10.1016/j.solmat.2012.12.016
    [23] Choy W, Sha W, Li X, et al. (2014) Multi-Physical Properties of Plasmonic Organic Solar Cells. Prog Electromag Res 146: 25–46. doi: 10.2528/PIER14031810
    [24] Choy W (2014) The emerging multiple metal nanostructures for enhancing the light trapping of thin film organic photovoltaic cells. Chem Commun 50: 11984–11993. doi: 10.1039/C4CC03767G
    [25] Gan Q, Bartoli FJ, Kafafi ZH (2013) Plasmonic-Enhanced Organic Photovoltaics: Breaking the 10% Efficiency Barrier. Adv Mater 25: 2385–2396. doi: 10.1002/adma.201203323
    [26] Wanninayake AP, Gunashekar S, Li S, et al. (2015) CuO Nanoparticles Based Bulk Heterojunction Solar Cells: Investigations on Morphology and Performance. J Sol Energy Eng 137: 031016. doi: 10.1115/1.4029542
    [27] Wright M, Uddin A (2012) Organic-inorganic hybrid solar cells: A comparative review. Sol Energ Mat Sol C 107: 87–111.
    [28] Bundgaard E, Shaheen SE, Krebs FC, et al. (2007) Bulk heterojunctions based on a low band gap copolymer of thiophene and benzothiadiazole. Sol Energ Mat Sol C 91: 1631–1637. doi: 10.1016/j.solmat.2007.05.013
    [29] Fung D, Qiao LF, Choy W, et al. (2011) Optical and electrical properties of efficiency enhanced polymer solar cells with Au nanoparticles in a PEDOT–PSS layer. J Mater Chem 21: 16349–16356. doi: 10.1039/c1jm12820e
    [30] Hsu MH, Yu P, Huang JH, et al. (2011) Balanced carrier transport in organic solar cells employing embedded indium-tinoxide nanoelectrodes. Appl Phys Lett 98: 073308-1. doi: 10.1063/1.3556565
    [31] Li G, Shrotriya V, Yao Y, et al. (2005) Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly„3-hexylthiophen. J Appl Phys 98: 043704. doi: 10.1063/1.2008386
    [32] Kim K, Carroll DL (2005) Roles of Au and Ag nanoparticles in efficiency enhancement of poly(3-octylthiophene)/C60 bulk heterojunction photovoltaic devices. Appl Phys Lett 87: 203113. doi: 10.1063/1.2128062
    [33] Krebs FC, Thomann Y, Thomann R, et al. (2008) A simple nanostructured polymer/ZnO hybrid solar cell-preparation and operation in air. Nanotechnology 19: 424013. doi: 10.1088/0957-4484/19/42/424013
    [34] Wanninayake A, Gunashekar S, Li S, et al. (2015) Performance enhancement of polymer solar cells using copper oxide nanoparticles. Semicond Sci Technol 30: 064004. doi: 10.1088/0268-1242/30/6/064004
    [35] Nguyen BP, Kim T, Park CR (2014) Nanocomposite-based bulk heterojunction hybrid solar cells. J Nanomater (2014): 243041.
    [36] Eisenhawer B, Sensfuss S, Sivakov V, et al. (2011) Increasing the efficiency of polymer solar cells by silicon nanowires. Nanotechnology 22: 315401. doi: 10.1088/0957-4484/22/31/315401
  • Reader Comments
  • © 2016 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(7384) PDF downloads(1463) Cited by(6)

Article outline

Figures and Tables

Figures(8)  /  Tables(2)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog