Research article Special Issues

Summer cooling potential of urban vegetation—a modeling study for Melbourne, Australia

  • Received: 17 March 2015 Accepted: 11 May 2015 Published: 24 June 2015
  • The summer cooling potential of urban vegetation is investigated using an urban climate model for the current and future climates in the Melbourne central business district (CBD) area with various urban forms and vegetation schemes. Simulation results suggest that the average seasonal summer temperatures can be reduced in the range of around 0.5 and 2°C if the Melbourne CBD were replaced by vegetated suburbs and planted parklands, respectively, benefiting a reduction in the number of hot days. It was also found that despite the projected warming in the future and variations in the climate projections among different climate models, the average seasonal cooling potential due to various urban vegetation schemes may not change significantly in comparison with those predicted for the current climate, indicating little dependency on climate change. This finding suggests that the average seasonal cooling potential as a result of urban vegetation in future climates may be empirically quantified in similar amounts to those under the current climate. When urban climate models are used, the cooling potential of urban vegetation in future climates may be quantified by modeling several selected years with one or a few climate models.

    Citation: Dong Chen, Marcus Thatcher, Xiaoming Wang, Guy Barnett, Anthony Kachenko, Robert Prince. Summer cooling potential of urban vegetation—a modeling study for Melbourne, Australia[J]. AIMS Environmental Science, 2015, 2(3): 648-667. doi: 10.3934/environsci.2015.3.648

    Related Papers:

  • The summer cooling potential of urban vegetation is investigated using an urban climate model for the current and future climates in the Melbourne central business district (CBD) area with various urban forms and vegetation schemes. Simulation results suggest that the average seasonal summer temperatures can be reduced in the range of around 0.5 and 2°C if the Melbourne CBD were replaced by vegetated suburbs and planted parklands, respectively, benefiting a reduction in the number of hot days. It was also found that despite the projected warming in the future and variations in the climate projections among different climate models, the average seasonal cooling potential due to various urban vegetation schemes may not change significantly in comparison with those predicted for the current climate, indicating little dependency on climate change. This finding suggests that the average seasonal cooling potential as a result of urban vegetation in future climates may be empirically quantified in similar amounts to those under the current climate. When urban climate models are used, the cooling potential of urban vegetation in future climates may be quantified by modeling several selected years with one or a few climate models.


    加载中
    [1] United Nations, World Urbanization Prospects, the 2014 Revision. 2014. Available from: http://esa.un.org/unpd/ accessed March 2015.
    [2] DSEWPaC (Department of Sustainability, Environment, Water, Population and Communities), State of the Environment 2011, 2011. Available from: http://www.environment.gov.au/science/soe/2011-report/contents
    [3] Morris CJG, Simmonds I, Plummer N (2001) Quantification of the Influences of Wind and Cloud on the Nocturnal Urban Heat Island of a Large City. J Appl Meteorol 40: 169-182. doi: 10.1175/1520-0450(2001)040<0169:QOTIOW>2.0.CO;2
    [4] Coutts A, Beringer J, Tapper N (2010) Changing urban climate and CO2 emissions: implications for the development of policies for sustainable cities. Urban Policy Res 28: 27-47. doi: 10.1080/08111140903437716
    [5] Wu K, Yang XQ (2013) Urbanization and heterogeneous surface warming in eastern China. Chin Sci Bull 58: 1363-1373. doi: 10.1007/s11434-012-5627-8
    [6] DSE (Department of Sustainability and Environment), Melbourne 2030: Planning for Sustainable Growth. State Government of Victoria, 2002. Available from: http://www.dtpli.vic.gov.au/planning/plans-and-policies/planning-for-melbourne/melbournes-strategic-planning-history/melbourne-2030-planning-for-sustainable-growth
    [7] Konopacki S, Akbari H (2002) Energy savings for heat island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City). Draft Final Report, LBNL-49638, University of California, Berkeley.
    [8] Kolokotroni M, Giannitsaris I, Watkins R (2006) The effect of the London Urban Heat Island on building summer cooling demand and night ventilation strategies. Sol Energ 80: 383-392. doi: 10.1016/j.solener.2005.03.010
    [9] Priyadarsini R (2011) Urban Heat Island and its Impact on Building Energy Consumption. Adv Build Energ Res 3: 261-270.
    [10] Changnon SA, Kunkel KE, Reinke BC (1996) Impacts and responses to the 1995 heat wave: A call to action. Bull Am Meteorol Soc 77: 1497-1505. doi: 10.1175/1520-0477(1996)077<1497:IARTTH>2.0.CO;2
    [11] Haines A, Kovats RS, Campbell-Lendrum D, et al. (2006) Climate change and human health: impacts, vulnerability, and mitigation. Lancet 367: 2101-2109. doi: 10.1016/S0140-6736(06)68933-2
    [12] Cadot E, Rodwin VG, Spira A (2007) In the heat of the summer: lessons from the heat waves in Paris. J Urban Health 84: 466-468. doi: 10.1007/s11524-007-9161-y
    [13] Luber G (2008) Climate Change and Extreme Heat Events, Am J Prev Med 35: 429-435.
    [14] Nicholls N, Skinner C, Loughnan M, et al. (2008) A simple heat alert system for Melbourne, Australia, Int J Biometeorol 52: 375-384.
    [15] Kovats RS, Hajat S (2008) Heat stress and public health: a critical review. Annu Rev Public Health 29: 41-55. doi: 10.1146/annurev.publhealth.29.020907.090843
    [16] Loughnan ME, Nicholls N, Tapper NJ (2010) The effects of summer temperature, age and socioeconomic circumstance on acute myocardial infarction admissions in Melbourne, Australia. Int J Health Geogr 9: 41. doi: 10.1186/1476-072X-9-41
    [17] DHS, January 2009 Heatwave in Victoria: an assessment of health impacts. Victorian Government Department of Human Services, Victoria, 2009. Available from: http://docs.health.vic.gov.au/docs/doc/F7EEA4050981101ACA257AD80074AE8B/$FILE/heat_health_impact_rpt_Vic2009.pdf
    [18] Alexander LV, Arblaster J (2008) Assessing trends in observed and modelled climate extremes over Australia in relation to future projections. Int J Climatol 29: 417-435.
    [19] Solecki WD, Rosenzweig C, Parshall L, et al. (2005) Mitigation of the heat island effect in urban New Jersey. Global Environ Chang Part B: Environ Hazards 6: 39-49.
    [20] Gill SE, Handley JF, Ennos AR, et al. (2008) Characterising the urban environment of UK cities and towns: A template for landscape planning. Landscape Urban Plann 87: 210-222. doi: 10.1016/j.landurbplan.2008.06.008
    [21] Gaitani N, Spanou A, Saliari M, et al. (2011) Improving the microclimate in urban areas: a case study in the centre of Athens. Build Serv Eng Res Technol 32: 53-71. doi: 10.1177/0143624410394518
    [22] Kleerekoper L, van Esch M, Salcedo TB (2012) How to make a city climate proof, addressing the urban heat island effect. Resour Conserv Recycl 64: 30-38. doi: 10.1016/j.resconrec.2011.06.004
    [23] DCLG, Building a greener future: towards zero carbon development. UK: Department of Communities and Local Government, 2007. Available from: http://webarchive.nationalarchives.gov.uk/20120919132719/http://www.communities.gov.uk/documents/planningandbuilding/pdf/153125.pdf
    [24] European Commission, Low energy buildings in Europe: current state of play, definition and best practice. 2009. Available from:http: //regions202020.eu/cms/inspiration/resources/PublicResource/330/view
    [25] Wang XM, Chen D, Ren ZG (2010) Assessment of climate change impact on residential building heating and cooling energy requirement in Australia. Build Environ 45: 1663-1682. doi: 10.1016/j.buildenv.2010.01.022
    [26] Rosenfeld AH, Akbari H, Romm JJ, et al. (1998) Cool communities: strategies for heat island mitigation and smog reduction. Energ Build 28: 51-62. doi: 10.1016/S0378-7788(97)00063-7
    [27] Akbari H, Pomerantz M, Taha H (2001) Cool surfaces and shade trees to reduce energy use and improve air quality in urban areas. Sol Energ 70: 295-310. doi: 10.1016/S0038-092X(00)00089-X
    [28] U.S. Environmental Protection Agency, Reducing Urban Heat Islands: Compendium of Strategies. 2008. Available from: http: //www.epa.gov/hiri/resources/compendium.htm
    [29] Memon RA, Leung DYC, Liu CH (2008) A review on the generation, determination and mitigation of Urban Heat Island. J Environ Sci 20: 120-128. doi: 10.1016/S1001-0742(08)60019-4
    [30] Santamouris M (2012) Cooling the cities - a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments. Sol Energ 103: 680-703.
    [31] Liu K, Bass B (2005) Performance of Green Roof Systems. National Research Council Canada, Report No. NRCC-47705, Toronto, Canada.
    [32] Rosenzweig C, Solecki W, Parshall L, et al. (2006) Mitigating New York City's Heat Island with Urban Forestry, Living Roofs, and Light Surfaces. Sixth Symposium on the Urban Environment and Forum on Managing our Physical and Natural Resources, American Meteorological Society, Atlanta, GA.
    [33] Alexandri E, Jones P (2008) Temperature decreases in an urban canyon due to green walls and green roofs in diverse climates. Build Environ 43: 480-493. doi: 10.1016/j.buildenv.2006.10.055
    [34] Wong JKW, Lau LSK (2013) From the ‘urban heat island’ to the ‘green island’? A preliminary investigation into the potential of retrofitting green roofs in Mongkok district of Hong Kong. Habit Int 39: 25-35.
    [35] Susca T, Gaffin SR, Dell'Osso GR (2011) Positive effects of vegetation: Urban heat island and green roofs, Environ Pollut 159: 2119-2126.
    [36] Xu T, Sathaye J, Akbari H, et al. (2012) Quantifying the direct benefits of cool roofs in an urban setting: Reduced cooling energy use and lowered greenhouse gas emissions. Build Environ 48: 1-6.
    [37] Smith GB, Aguilar JLC, Gentle AR, et al. (2012) Multi-parameter sensitivity analysis: A design methodology applied to energy efficiency in temperate climate houses. Energy Build 55: 668-673. doi: 10.1016/j.enbuild.2012.09.007
    [38] Bozonnet E, Musy M, Calmet I, et al. (2013) Modeling methods to assess urban fluxes and heat island mitigation measures from street to city scale. Int J Low Carbon Technol 0: 1-16.
    [39] Sailor DJ (1995) Simulated urban response to modifications in surface albedo and vegetative cover. J Appl Meteor 34: 1694- 1704. doi: 10.1175/1520-0450-34.7.1694
    [40] Taha H, Douglas S, Haney J (1997) Mesoscale meteorological and air quality impacts of increased urban albedo and vegetation. Energ Build 25: 169-177. doi: 10.1016/S0378-7788(96)01006-7
    [41] Shashua-Bar L, Hoffman ME (2000) Vegetation as a climatic component in the design of an urban street: An empirical model for predicting the cooling effect of urban green areas with trees. Energy Build 31: 221-35. doi: 10.1016/S0378-7788(99)00018-3
    [42] Kong FH, Yin HW, Wang CZ, et al. (2014) A satellite image-based analysis of factors contributing to the green-space cool island intensity on a city scale. Urban For Urban Gree 13: 846-853. doi: 10.1016/j.ufug.2014.09.009
    [43] Perini K, Magliocco A (2014) Effects of vegetation, urban density, building height, and atmospheric conditions on local temperatures and thermal comfort. Urban For Urban Gree 13:495-506. doi: 10.1016/j.ufug.2014.03.003
    [44] Chen C, Yue Y, Jiang W (2014) Numerical Simulation on Cooling Effects of Greening for Alleviating Urban Heat Island Effect in North China. Appl Mech Mater 675-677: 1227-1233. doi: 10.4028/www.scientific.net/AMM.675-677.1227
    [45] Yang JB, Liu HN, Sun JN, et al. (2015) Further Development of the Regional Boundary Layer Model to Study the Impacts of Greenery on the Urban Thermal Environment. J Appl Meteor Climatol 54: 137-152. doi: 10.1175/JAMC-D-14-0057.1
    [46] Gromke C, Blocken B, Janssen W, et al. (2015) CFD analysis of transpirational cooling by vegetation: Case study for specific meteorological conditions during a heat wave in Arnhem, Netherlands, Build Environ 83: 11-26.
    [47] Middel A, Chhetri N, Quay R (2015) Urban forestry and cool roofs: Assessment of heat mitigation strategies in Phoenix residential neighborhoods. Urban For Urban Gree 14: 178-186. doi: 10.1016/j.ufug.2014.09.010
    [48] Thatcher M, Hurley P (2012) Simulating Australian urban climate in a mesoscale atmospheric numerical model. Boundary Layer Meteorol 142: 149-175. doi: 10.1007/s10546-011-9663-8
    [49] Hurley P, Physick W, Luhar A (2005) TAPM - A practical approach to prognostic meteorological and air pollution modeling. Environ Model Sotfw 20: 737-752. doi: 10.1016/j.envsoft.2004.04.006
    [50] Masson V (2000) A physically-based scheme for the urban energy budget in atmospheric models. Boundary Layer Meteorol 94: 357-397. doi: 10.1023/A:1002463829265
    [51] Harman I, Barlow J, Belcher S (2004) Scalar fluxes from urban street canyons. Part II: Model. Boundary Layer Meteorol 113: 387-409. doi: 10.1007/s10546-004-6205-7
    [52] Coutts A, Beringer J, Tapper N (2007) Impact of increasing urban density on local climate: spatial and temporal variations in the surface energy balance in Melbourne, Australia. J Appl Meteor Climatol 46: 477-493. doi: 10.1175/JAM2462.1
    [53] McGregor J, C-CAM: Geometric aspects and dynamical formulation. CSIRO Atmospheric Research, 2005. Available from: www.cmar.csiro.au/e-print/open/mcgregor_2005a.pdf
    [54] McGregor J, Dix M (2008) An updated description of the conformal-cubic atmospheric model. High Resolution Simulation of the Atmosphere and Ocean, Hamilton, K. and Ohfuchi, W., Eds., Springer 51-76.
    [55] Katzfey J, McGregor J, Nguyen K, et al. Dynamical downscaling techniques: impacts on regional climate change signals. In: Anderssen RS, Braddock RD and Newham LTH (ed) 18th World IMACS congress and MODSIM09 international congress on modelling and simulation. 2009, July; Cairns. Modelling and Simulation Society of Australia and New Zealand. pp 2377-2383.
    [56] Nguyen K, Katzfey J, McGregor J (2011) Global 60 km simulations with the Conformal Cubic Atmospheric Model: Evaluation over the tropics. Clim Dyn 39: 637-654.
    [57] City of Melbourne, Urban Forest Strategy Make a Great City Greener 2013-2032. 2015. Available from: http://www.melbourne.vic.gov.au/Sustainability/UrbanForest/Documents/Urban_Forest_Strategy.pdf
  • Reader Comments
  • © 2015 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5675) PDF downloads(1282) Cited by(7)

Article outline

Figures and Tables

Figures(8)  /  Tables(2)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog