Research article Special Issues

Harmonic emission of LED lighting

  • Received: 12 September 2019 Accepted: 02 December 2019 Published: 25 December 2019
  • This paper analyses harmonic emission of different light-emitting diode (LED) lighting systems. Basic mathematical analysis of harmonic emission was presented. Paper deals with single LED lights (bulbs) and street lighting systems formed by luminaries. Harmonic emission results were obtained by measurement. More, single LED bulbs were modeled within EMTP-ATP software. Comparison of measured results and results obtained by simulation was performed. Further, one LED lighting system was compared with sodium lighting system in the harmonic emission area. Comparison was performed by replacing one sodium lighting system (in one street) with appropriate LED lighting system. Standards which deals with harmonic emission were presented and compared. More, obtained results of harmonic emission were compared with valid Standards. The goal of paper is to compare harmonic emission of various bulbs and on other side to analyze LED lighting systems with luminaries. It is important because today there are various LED lights in market made by various companies. It is due high share penetration of LED lighting in each area and their implementation in: house, buildings, business areas, factories, street lighting systems etc. On other side, LED lights are nonlinear loads which potentially can have negative effect on distribution grid. One more goal is to compare measured results and the results obtained by modeling. Correctly modeled LED lighting can be used in various research. It can be used to improve the manufacturing process of LED lights.

    Citation: Ivan Ramljak, Amir Tokić. Harmonic emission of LED lighting[J]. AIMS Energy, 2020, 8(1): 1-26. doi: 10.3934/energy.2020.1.1

    Related Papers:

  • This paper analyses harmonic emission of different light-emitting diode (LED) lighting systems. Basic mathematical analysis of harmonic emission was presented. Paper deals with single LED lights (bulbs) and street lighting systems formed by luminaries. Harmonic emission results were obtained by measurement. More, single LED bulbs were modeled within EMTP-ATP software. Comparison of measured results and results obtained by simulation was performed. Further, one LED lighting system was compared with sodium lighting system in the harmonic emission area. Comparison was performed by replacing one sodium lighting system (in one street) with appropriate LED lighting system. Standards which deals with harmonic emission were presented and compared. More, obtained results of harmonic emission were compared with valid Standards. The goal of paper is to compare harmonic emission of various bulbs and on other side to analyze LED lighting systems with luminaries. It is important because today there are various LED lights in market made by various companies. It is due high share penetration of LED lighting in each area and their implementation in: house, buildings, business areas, factories, street lighting systems etc. On other side, LED lights are nonlinear loads which potentially can have negative effect on distribution grid. One more goal is to compare measured results and the results obtained by modeling. Correctly modeled LED lighting can be used in various research. It can be used to improve the manufacturing process of LED lights.


    加载中


    [1] Das JC (2015) Power system harmonics and passive filter design, Wiley: New Jersey.
    [2] Tokić A, Milardić V (2015) Power Quality, Printcom doo Grafički inženjering, Tuzla.
    [3] Hernandez JL, Castro MA, Carpio J, et al. (2009) Harmonics in power systems. International Conference on Renewable Energies and Power (ICREPQ), Valencia, Spain, 1-5.
    [4] Chang G, Hatziadoniu C, Xu W, et al. (2004) Modeling devices with nonlinear voltage-current characteristics for harmonic studies. IEEE Trans Power Delivery 19: 1802-1811. doi: 10.1109/TPWRD.2004.835429
    [5] Tokić A, Jukan A, Suljkanović V (2015) Modelling of low power electronic loads in harmonic analysis. IFAC-PapersOnLine 48: 675-676.
    [6] Tokić A, Jukan A, Smajić J (2016) Parameter estimation of single-phase rectifier-based loads: Analytical approach. IEEE Trans Power Delivery 31: 532-540. doi: 10.1109/TPWRD.2015.2424914
    [7] Ferracci P (2001) Cahier technique no. 199-power quality, Schneider electric.
    [8] Baggini A (2008) Handbook of power quality. Wiley: West Sussex.
    [9] Molina J, Sainz M (2015) Compact fluorescent lamp modeling for large-scale harmonic penetration studies. IEEE Trans Power Delivery 30: 1523-1531. doi: 10.1109/TPWRD.2014.2363143
    [10] Tokić A, Jukan A, Uglešić I, et al. (2018) Nonlinear model of fluorescent lamp in harmonic studies. IEEE PES Innovative Smart Grid Technologies Conference, Sarajevo, Bosnia and Herzegovina, 1-6.
    [11] Lom GM, Laverty D, Morrow DJ, et al. (2019) Load and harmonic distortion characterization of modern low-energy lighting under applied voltage variation. Electr Power Syst Res 169: 124-138. doi: 10.1016/j.epsr.2018.12.029
    [12] European Std. EN 50160:2011 (2011) Voltage Characteristics of Electricity Supplied by Public Distribution Systems.
    [13] IEC 61000-3-2 (2014) Electromagnetic Compatibility (EMC)-Part 3-2: Limits-Limits for Harmonic Current Emissions (Equipment Input Current ≤16 A Per Phase).
    [14] IEEE Std. 519-2014 (2014) IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems.
    [15] IEC 61000-4-7 (2002) Electromagnetic Compatibility (EMC), Testing and measurement techniques-General guide on harmonics and interharmonics measurements and instrumentation.
    [16] Akila A, Etman M, Youssed K (2019) Passive mitigation technique for the harmonics caused by LED lamps. International Conference on Electricity Distribution (CIRED), Madrid, Spain, 1-5.
    [17] Uddin S, Shareef H, Mohamed A, et al. (2013) Power quality performance of energy-efficient low-wattage LED lamps. Measurement 46: 3783-3795. doi: 10.1016/j.measurement.2013.07.022
    [18] Uddin S, Shareef H, Krause O, et al. (2015) Impact of large-scale installation of LED lamps in a distribution system. Turkish J Electr Eng Comput Sci 23: 1769-1780. doi: 10.3906/elk-1404-243
    [19] Uddin S, Shareef H, Mohamed A, et al. (2013) Investigation of harmonic generation from dimmable LED lamps. Przegl Elektrotech 89: 151-155.
    [20] Veloso P, Lebre A, Bastiao F (2019) LED technology in public lighting-Analysis of the impact in power quality in the low voltage grid distribution. International Conference on Electricity Distribution (CIRED), Madrid, Spain, 1-5.
    [21] Gil-de-Castro A, Bollen M, Moreno-Munoz A (2013) Street lamps aggregation analysis through IEC 61000-3-6 approach. International Conference on Electricity Distribution (CIRED), Stockholm, Sweden, 1-4.
    [22] IEC 61000-4-30 (2015) Electromagnetic Compatibility (EMC). Testing and measurement techniques-Power quality measurement methods.
  • Reader Comments
  • © 2020 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5760) PDF downloads(1416) Cited by(2)

Article outline

Figures and Tables

Figures(29)  /  Tables(13)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog