Research article Special Issues

Development of walkway blocks with high water permeability using waste glass fiber-reinforced plastic

  • Received: 15 October 2018 Accepted: 13 December 2018 Published: 17 December 2018
  • To utilize waste glass fiber-reinforced plastic (GFRP), we have created porous ceramics by mixing crushed GFRP with clay and then firing the resultant mixture. Some GFRP/clay ceramics have great porosity, which allows water to pass through them. In this study, by exploiting the high strength and water permeability of GFRP/clay ceramics, we aimed to develop water-permeable paving blocks that could prevent the inundation of roads by sudden heavy rains in urban areas. Various specimens were made by adjusting the mixing ratio of clay and crushed GFRP (40–60 mass%), the GFRP particle size, and the firing temperature. Bending strength, compressive strength, and permeability tests were then carried out on the samples. The obtained values were compared with those of porous ceramics made by mixing plastic without glass fiber and clay before firing. First, the difference in the porosity and strength of GFRP/clay ceramics and porous ceramics without glass fiber was clarified. Then, the manufacturing conditions of ceramics that satisfy both strength and permeability criteria were clarified for water-permeable paving blocks.

    Citation: Yusuke Yasuda, Hayato Iwasaki, Kentaro Yasui, Ayako Tanaka, Hiroyuki Kinoshita. Development of walkway blocks with high water permeability using waste glass fiber-reinforced plastic[J]. AIMS Energy, 2018, 6(6): 1032-1049. doi: 10.3934/energy.2018.6.1032

    Related Papers:

  • To utilize waste glass fiber-reinforced plastic (GFRP), we have created porous ceramics by mixing crushed GFRP with clay and then firing the resultant mixture. Some GFRP/clay ceramics have great porosity, which allows water to pass through them. In this study, by exploiting the high strength and water permeability of GFRP/clay ceramics, we aimed to develop water-permeable paving blocks that could prevent the inundation of roads by sudden heavy rains in urban areas. Various specimens were made by adjusting the mixing ratio of clay and crushed GFRP (40–60 mass%), the GFRP particle size, and the firing temperature. Bending strength, compressive strength, and permeability tests were then carried out on the samples. The obtained values were compared with those of porous ceramics made by mixing plastic without glass fiber and clay before firing. First, the difference in the porosity and strength of GFRP/clay ceramics and porous ceramics without glass fiber was clarified. Then, the manufacturing conditions of ceramics that satisfy both strength and permeability criteria were clarified for water-permeable paving blocks.


    加载中
    [1] Ministry of the Environment Government of Japan ed. (2010) Annual Report on the Environment, the Sound Material-Cycle Society and the Biodiversity in Japan, Our Responsibility and Commitment to Preserve the Earth, Challenge 25: 1–169.
    [2] Plastic waste management institute ed. (2016) An Introduction to Plastic Recycling, 1–33.
    [3] Nagaoka T (2008) Value-Added Recycling of Disposal Plastics. J JSTP 49: 175–179.
    [4] Yang Y, Boom R, Irion B, et al. (2012) Recycling of Composite Materials. Chem Eng Process 51: 53–68. doi: 10.1016/j.cep.2011.09.007
    [5] Materials science society of Japan ed. (1999) Global environment and materials. Shokabo Co., Ltd., Tokyo, 61–74 (in Japanese).
    [6] WON JP, Jang CI, Lee SJ, et al. (2010) Long term performance of recycled PET fiber-reinforced cement composites. Constr Build Mater 24: 660–665. doi: 10.1016/j.conbuildmat.2009.11.003
    [7] Foti D, Paparella F (2014) Impact behavior of structural elements in concrete reinforced with PET fibers. Mech Res Commun 57: 57–66. doi: 10.1016/j.mechrescom.2014.02.007
    [8] Akçaözoğlua S, Atişb CD, Akçaözoğluc K (2010) An investigation on the use of shredded waste PET bottle as aggregate in lightweight concrete. Waste Manage 30: 285–290. doi: 10.1016/j.wasman.2009.09.033
    [9] Foti D (2013) Use of recycled waste pet bottles fibers for the reinforcement of concrete. Compos Structu 96: 396–404. doi: 10.1016/j.compstruct.2012.09.019
    [10] Mohammadi Y, Singh Sp, Kaushik SK (2008) Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state. Constr Build Mater 22: 956–965. doi: 10.1016/j.conbuildmat.2006.12.004
    [11] Khaloo A, Raisi EM, Hosseini P, et al. (2014) Mechanical performance of self-compacting concrete reinforced with steel fibers. Constr Build Mater 51: 179–186. doi: 10.1016/j.conbuildmat.2013.10.054
    [12] Mazaheripour H, Ghanbarpour S, Mirmoradi SH, et al. (2011) The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete. Constr Build Mater 25: 351–358. doi: 10.1016/j.conbuildmat.2010.06.018
    [13] Yesilata B, Isiker Y, Turgut P (2009) Thermal insulation enhancement in concretes by adding waste PET and rubber pieces. Constr Build Mater 23: 1878–1882. doi: 10.1016/j.conbuildmat.2008.09.014
    [14] Kinoshita H, Kaizu K, Takeda T, et al. (2010) Development of high strength porous specimen by Recycling of Waste Glass Fiber Reinforced Plastics. T Jpn Soc Mech Eng 76: 1507–1513. doi: 10.1299/kikaia.76.1507
    [15] Kinoshita H, Nakazono T, Oyamada M, Yet al. (2011) Development of high-strength porous tiles produced by recycling glass fibers in waste GFRP: Influence of particle size of GFRP on properties of tiles. T Jpn Soc Mech Eng 11: 241–248.
    [16] Kinoshita H, Kaizu K, Hasegawa S, et al. (2013) Production and Material Properties of Ceramic From Waste Glass Fiber Reinforced Plastic. J Environ Eng 8: 27–40. doi: 10.1299/jee.8.27
    [17] Yasui K, Goto S, Kinoshita H, et al. (2016) Ceramic waste glass fiber-reinforced plastic-containing filtering materials for turbid water treatment. Environ Earth Sci 75: 1135. doi: 10.1007/s12665-016-5933-6
    [18] Beeldens A, Herrier C (2007) Water-pervious pavement blocks environmentally compatible and cost-efficient water treatment at large road and parking areas. Betonwerk Fertigteil-Technik 73: 12–24.
    [19] Sriravindrarajah R, Mohammad KJ, Singh A (2013) Permeability and drying of pervious concrete pavers, 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, 1703–1707.
    [20] Drake JAP, Bradford A, Marsalek J (2013) Review of environmental performance of permeable pavement systems. Water Qual Res J Can 48: 203–222. doi: 10.2166/wqrjc.2013.055
    [21] Tanaka M (1980) Clay hand book. Gihoudou Shuppan Co. Ltd. Tokyo, 408–445 (in Japanese).
    [22] Yasuda Y, Kinoshita H, Yasui K, et al. (2016) Ceramics utilizing glass fiber-reinforced plastic as civil engineering materials to counteract the heat island phenomenon. Mech Eng J 3: 16-00078.
    [23] Architectural Institute of Japan ed. (2009) Japanese Architectural Standard Specification JASS 7 Masonry Work. MARUZEN-YUSHODO Co., Ltd., Tokyo, 329–343.
    [24] Sakka S (1985) Dictionary of glass. Asakura Publishing Co., Ltd., Tokyo, 28 (in Japanese).
    [25] Central Glass Co. Ltd. home page, General characteristics of long glass fiber. Available from: http://www.centralfiberglass.com/jp/glass_fiber/outline/index.html.
    [26] Yamada M (1992) High Strength Phenolic Molding Compounds. J Thermosetting Plast 13: 44–58.
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3483) PDF downloads(640) Cited by(3)

Article outline

Figures and Tables

Figures(14)  /  Tables(5)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog