AIMS Energy, 2017, 5(2): 209-223. doi: 10.3934/energy.2017.2.209.

Research article

Export file:


  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text


  • Citation Only
  • Citation and Abstract

Influence of design parameters on the structural and fatigue behaviors of a floating point wave energy converter

1 Instituto Politécnico de Coimbra, ISEC, DEM, Coimbra, Portugal
2 LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal

The demand for electricity production has been consistently raising since the last century. In the future, the tendency is to grow even further. Concerning this fact, renewable energy and specifically, wave energy should be considered as an alternative for energy production. However, devices suitable to harness this renewable energy source and convert it into electricity are not yet commercially competitive. This paper is focused on the structural analysis of a wave energy converter (WEC) through the numerical study of several design parameters. Tridimensional computer aided design (3D CAD) numerical models were built and several Finite Element Analyses (FEA) were performed using a commercial finite element code. The main components of the WEC were simulated assuming different materials. The Von Mises stress gradients and displacement fields determined by FEA demonstrated that, regardless of the WEC component, materials with low Young’s modulus seems to be unsuitable for this application. The same is valid for the material yield strength since materials with higher yield strength lead to a better structural behavior of the WEC components. The developed 3D CAD numerical model showed to be suitable to analyze different combinations of structural conditions.
  Article Metrics

Keywords wave energy converter; structural analysis; finite element analysis; failure

Citation: Pedro J. B. F. N. Beirão, Cândida M. S. P. Malça, Raimundo P. Felismina. Influence of design parameters on the structural and fatigue behaviors of a floating point wave energy converter. AIMS Energy, 2017, 5(2): 209-223. doi: 10.3934/energy.2017.2.209


  • 1. Valério D, Beirão P, Sá da Costa J (2007) Optimization of wave energy extraction with the archimedes wave swing. Ocean Eng 34: 2330–2344.    
  • 2. Guillou N, Chapalain G (2015) Numerical modelling of nearshore wave energy resource in the sea of Iroise. Renew Energ 83: 942–953.    
  • 3. Neill S, Hashemi M (2013) Wave power variability over the northwest European shelf seas. Appl Energ 106: 31–46.    
  • 4. Leijon M, Danielsson O, Eriksson M, et al. (2006) An electrical approach to wave energy conversion. Renew Energ 31: 1309–1319.    
  • 5. Falcão A (2010) Wave energy utilization: a review of the technologies. Renew Sust Energ Rev 14: 899–918.    
  • 6. Shoele K, Prowell I, Zhu Q, et al. (2011) Dynamic and structural modelling of a floating wind turbine. Int J Offshore Polar 21: 155–160.
  • 7. Robertson A, Jonkman J (2011) Loads analysis of several offshore floating wind turbine concepts, Proceedings of the 21th International Offshore and Polar Engineering Conference (ISOPE), Maui, Hawaii, USA.
  • 8. Aubault A, Cermelli C, Roddier D (2009) WindFloat: a floating foundation for offshore wind turbines–Part III: Structural analysis, Proceedings of the 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, Hawaii, USA.
  • 9. Kim B, Sung H, Kim J, et al. (2013) Comparison of linear spring and nonlinear FEM methods in dynamic coupled analysis of floating structure and mooring system. J Fluid Struct 42: 205–227.
  • 10. Fujikubo M (2005) Structural analysis for the design of VLFS. Mar Struct 18: 201–226.    
  • 11. Dong P (2005) A robust structural stress method for fatigue analysis of offshore/marine structures. J Offshore Mech Arct 127: 68–74.    
  • 12. Hansen V, Wang L, Sodahl N, et al. (2004) Guidelines on coupled analyses of deepwater floating systems, Offshore Technology Conference, Houston, USA.
  • 13. Thorburn K, Karlsson KE, Wolfbrandt A, et al. (2006) Time stepping finite element analysis of a variable speed synchronous generator with rectifier. Appl Energ 83: 371–386.    
  • 14. Yueh CY, Chuang SH (2012) A boundary element model for a partially piston-type porous wave energy converter in gravity waves. Eng Anal Bound Elem 36: 658–664.    
  • 15. Nader JR, Zhu SP, Cooper P (2012) A finite-element study of the efficiency of arrays of oscillating water column wave energy converters. Ocean Eng 43: 72–81.    
  • 16. Wang S, Soares C (2014) Numerical study on the water impact of 3D bodies by an explicit finite element method. Ocean Eng 78: 73–88.    
  • 17. Falnes J (2004) Ocean waves and oscillating systems: linear interactions including wave-energy extraction, 1st Ed., Cambridge, Cambridge University Press.
  • 18. Planchard D, Planchard M (2013) SolidWorks 2013 tutorial with video instruction, Schroff Development Corporation.
  • 19. Beirão P, Valério D (2015) Numerical comparison between deep water and intermediate water depth expressions applied to a wave energy converter. AIMS Energ 3: 525–546.    
  • 20. Malça C, Beirão P, Felismina R (2014) Influence of material selection on the structural behavior of a wave energy converter. AIMS Energ 2: 359–372.    
  • 21. Shigley J, Mischke C (1988) Mechanical engineering design, 5th Ed., McGraw-Hill Inc. Available from
  • 22. Spotts M (1998) Design of machine elements, 7th Ed., Prentice Hall.
  • 23. Campbell F (2008) Elements of metallurgy and engineering alloys, ASM International.
  • 24. CATI Tech Notes: Fatigue Strength Reduction Factor, 2014. Available from:


Reader Comments

your name: *   your email: *  

Copyright Info: 2017, Pedro J. B. F. N. Beirão, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (

Download full text in PDF

Export Citation

Copyright © AIMS Press All Rights Reserved