Research article Special Issues

Effects of biomass particle size on yield and composition of pyrolysis bio-oil derived from Chinese tallow tree (Triadica Sebifera L.) and energy cane (Saccharum complex) in an inductively heated reactor

  • Received: 14 October 2015 Accepted: 29 November 2015 Published: 03 December 2015
  • In the face of fluctuating petroleum costs and a growing demand for energy, the need for an alternative and sustainable energy source has increased. A viable solution for this problem can be attained by using thermochemical conversion, pyrolysis, of existing biomass sources for the production of liquid fuels. This study focuses on the effect that biomass particle size has on the conversion of biomass into liquid pyrolysis oil. Energy cane and Chinese tallow tree biomass were pyrolyzed at 550 ℃. The particle size ranges studied were < 0.5, 0.5 to 1.4, 1.4 to 2.4 and, 2.4 to 4.4 mm. The results indicate that the range from 0.5-1.4 mm is a better range for optimizing bio-oil production while keeping water content low.

    Citation: Gustavo Aguilar, Pranjali D. Muley, Charles Henkel, Dorin Boldor. Effects of biomass particle size on yield and composition of pyrolysis bio-oil derived from Chinese tallow tree (Triadica Sebifera L.) and energy cane (Saccharum complex) in an inductively heated reactor[J]. AIMS Energy, 2015, 3(4): 838-850. doi: 10.3934/energy.2015.4.838

    Related Papers:

  • In the face of fluctuating petroleum costs and a growing demand for energy, the need for an alternative and sustainable energy source has increased. A viable solution for this problem can be attained by using thermochemical conversion, pyrolysis, of existing biomass sources for the production of liquid fuels. This study focuses on the effect that biomass particle size has on the conversion of biomass into liquid pyrolysis oil. Energy cane and Chinese tallow tree biomass were pyrolyzed at 550 ℃. The particle size ranges studied were < 0.5, 0.5 to 1.4, 1.4 to 2.4 and, 2.4 to 4.4 mm. The results indicate that the range from 0.5-1.4 mm is a better range for optimizing bio-oil production while keeping water content low.


    加载中
    [1] Muley PD, Henkel C, Abdollahi KK, et al. (2015) Pyrolysis and Catalytic Upgrading of Pinewood Sawdust Using Induction Heating Reactor. Energ Fuel.
    [2] Urbatsch L (2000) Chinese tallow tree (Triadica sebifera (L.) Small. Plant Guide. Natural Resources Conservation Service (NRCS).
    [3] Heo HS, Park HJ, Park Y-K, et al. (2010) Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed. Bioresource technol 101: S91-S96. doi: 10.1016/j.biortech.2009.06.003
    [4] Lu Q, Yang Xl, Zhu Xf (2008) Analysis on chemical and physical properties of bio-oil pyrolyzed from rice husk. J Anal Appl Pyrol 82: 191-198. doi: 10.1016/j.jaap.2008.03.003
    [5] McKendry P (2002) Energy production from biomass (part 2): conversion technologies. Bioresource Technol 83: 47-54. doi: 10.1016/S0960-8524(01)00119-5
    [6] Mohan D, Pittman CU, Steele PH (2006) Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review. Energ Fuel 20: 848-889. doi: 10.1021/ef0502397
    [7] Bergström D, Israelsson S, ñhman M, et al. (2008) Effects of raw material particle size distribution on the characteristics of Scots pine sawdust fuel pellets. Fuel Process Technol 89: 1324-1329. doi: 10.1016/j.fuproc.2008.06.001
    [8] Liao R, Gao B, Fang J (2013) Invasive plants as feedstock for biochar and bioenergy production. Bioresource technol 140: 439-442. doi: 10.1016/j.biortech.2013.04.117
    [9] Bridgwater AV, Meier D, Radlein D (1999) An overview of fast pyrolysis of biomass. Org Geochem 30: 1479-1493. doi: 10.1016/S0146-6380(99)00120-5
    [10] Tsai WT, Lee MK, Chang YM (2006) Fast pyrolysis of rice straw, sugarcane bagasse and coconut shell in an induction-heating reactor. J Anal Appl Pyrol 76: 230-237. doi: 10.1016/j.jaap.2005.11.007
    [11] Uzun BB, Kanmaz G (2013) Effect of operating parameters on bio-fuel production from waste furniture sawdust. Waste Manage Res 31: 361-367. doi: 10.1177/0734242X12470402
    [12] Ateş F, Pütün E, Pütün AE (2004) Fast pyrolysis of sesame stalk: yields and structural analysis of bio-oil. J Anal Appl Pyrol 71: 779-790. doi: 10.1016/j.jaap.2003.11.001
    [13] Miao Z, Grift TE, Hansen AC, et al. (2011) Energy requirement for comminution of biomass in relation to particle physical properties. Ind Crop Prod 33: 504-513. doi: 10.1016/j.indcrop.2010.12.016
    [14] Onay ñ (2003) Production of Bio-Oil from Biomass: Slow Pyrolysis of Rapeseed (Brassica napus L.) in a Fixed-Bed Reactor. Energ Sources 25: 879-892.
    [15] Şensöz S, Angın D, Yorgun S (2000) Influence of particle size on the pyrolysis of rapeseed (Brassica napus L.): fuel properties of bio-oil. Biomass Bioenerg 19: 271-279.
    [16] Rhén C, Gref R, Sjöström M, et al. (2005) Effects of raw material moisture content, densification pressure and temperature on some properties of Norway spruce pellets. Fuel Process Technol 87: 11-16. doi: 10.1016/j.fuproc.2005.03.003
    [17] Shen J, Wang XS, Garcia-Perez M, et al. (2009) Effects of particle size on the fast pyrolysis of oil mallee woody biomass. Fuel 88: 1810-1817. doi: 10.1016/j.fuel.2009.05.001
    [18] Bennadji H, Smith K, Serapiglia MJ, et al. (2014) Effect of Particle Size on Low-Temperature Pyrolysis of Woody Biomass. Energ Fuel 28: 7527-7537. doi: 10.1021/ef501869e
    [19] Kim M, Day DF (2011) Composition of sugar cane, energy cane, and sweet sorghum suitable for ethanol production at Louisiana sugar mills. J Ind Microbiol Biot38: 803-807.
    [20] Jubinsky G, Anderson LC (1996) The invasive potential of Chinese tallow-tree (Sapium sebiferum Roxb.) in the Southeast. Castanea: 226-231.
    [21] Fennell LP, Boldor D (2013) Dielectric characterization of the seeds of invasive Chinese Tallow Tree. J Microwave Power EE 47: 237-250.
    [22] Henkel C (2014) A Study of Induction Pyrolysis of Lignocellulosic Biomass for the Production of Bio-oil: Louisiana State University.
    [23] Bedmutha RJ, Ferrante L, Briens C, et al. (2009) Single and two-stage electrostatic demisters for biomass pyrolysis application. Chem Eng Process: Process Intensification 48: 1112-1120. doi: 10.1016/j.cep.2009.02.007
    [24] Scholze B, Meier D (2001) Characterization of the water-insoluble fraction from pyrolysis oil (pyrolytic lignin). Part I. PY-GC/MS, FTIR, and functional groups. J Anal Appl Pyrol 60: 41-54.
    [25] Demirbas A, Demirbas H (2004) Estimating the Calorific Values of Lignocellulosic Fuels. Energ Explor Exploit 22: 135. doi: 10.1260/0144598041475198
    [26] Luo S, Xiao B, Hu Z, et al. (2010) Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor. Int J Hydrogen Energ 35: 93-97. doi: 10.1016/j.ijhydene.2009.10.048
    [27] Vamvuka D, Kakaras E, Kastanaki E, et al. (2003) Pyrolysis characteristics and kinetics of biomass residuals mixtures with lignite. Fuel 82: 1949-1960. doi: 10.1016/S0016-2361(03)00153-4
    [28] Jung SH, Kang BS, Kim JS (2008) Production of bio-oil from rice straw and bamboo sawdust under various reaction conditions in a fast pyrolysis plant equipped with a fluidized bed and a char separation system. J Anal Appl Pyrol 82: 240-247. doi: 10.1016/j.jaap.2008.04.001
  • Reader Comments
  • © 2015 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5749) PDF downloads(1282) Cited by(15)

Article outline

Figures and Tables

Figures(7)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog