Export file:


  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text


  • Citation Only
  • Citation and Abstract

Thermodynamic analysis of methanation of palm empty fruit bunch (PEFB) pyrolysis oil with and without in situ CO2 sorption

Energy Research Institute, School of Chemical and Process Engineering, The University of Leeds, LS2 9JT, UK

Special Issues: Renewable energy systems and agro-residue management

Thermodynamic equilibrium analysis for conversion of palm empty fruit bunch (PEFB) bio-oil to methane using low-temperature steam reforming (LTSR) process was conducted by assuming either isothermal or adiabatic condition, with and without sorption enhancement (SE-LTSR), with CaO(S) or Ca(OH)2(S) as CO2 sorbent. Temperatures of 300-800 K, molar steam to carbon (S/C) ratios of 0.3-7.0, pressures of 1-30 atm and molar calcium to carbon ratios (Ca:C) of 0.3-1.0 were simulated. For reasons of process simplicity, the best conditions for CH4 production were observed for the adiabatic LTSR process without sorption at S/C between 2.5 and 3 (compared to the stoichiometric S/C of 0.375), inlet temperature above 450 K, resulting in reformer temperature of 582 K, where close to the theoretical maximum CH4 yield of 38 wt % of the simulated dry PEFB oil was obtained, resulting in a reformate consisting of 44.5 vol % CH4, 42.7 vol % CO2 and 12.7 vol % H2 and requiring only moderate heating mainly to partially preheat the reactants. Temperatures and S/C below these resulted in high risk of carbon by-product.
  Article Metrics


1. Balat M (2008) Mechanisms of thermochemical biomass conversion processes. Part 1: Reactions of pyrolysis. Energ source part a 30: 620-635.    

2. Sulaiman F, Abdullah N (2011) Optimum conditions for maximizing pyrolysis liquids of oil palm empty fruit bunches. Energy 36: 2352-2359.    

3. Mohan D, Pittman CU, Steele PH (2006) Pyrolysis of wood/biomass for bio-oil: A critical review. Energ fuel 20: 848-889.    

4. Bridgewater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Biomass bioenerg 38: 68-94.    

5. Zhang R, Cummer K, Suby A, et al. (2005) Biomass-derived hydrogen from an air-blown gasifier. Fuel process technol 86: 861-874.    

6. Sulaiman F, Abdullah N, Gerhauser H, et al. (2011) Review: An outlook of Malaysian energy, oil palm industry and its utilization of wastes as useful resources. Biomass bioenerg 35: 3775-3786.

7. Badger PC, Fransham P (2006) Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs-a preliminary assessment. Biomass bioenerg 20: 321-325.

8. Czernik S, Bridgewater AV (2004) Overview of applications of biomass fast pyrolysis oil. Energ fuel 18: 590-598.    

9. Kopyscinski J, Schildhauer TJ, Biollaz SMA (2010) Production of synthetic natural gas (SNG) from coal and dry biomass: A technology review from 1950 to 2009. Fuel 89: 1763-1783.    

10. National Renewable Energy Laboratory (US). Energy analysis biogas potential in the United States. Colorado (US): U.S. Department of Energy (US); 2013. 4 p. (NREL publication; no. NREL/FS-6A20-60178).

11. AEBIOM European Biomass Association. A biogas road map for Europe. Belgium: Renewable Energy House, Rue d’Arlon, Brussels; 2009 October. Available from: http://www.aebiom.org/IMG/pdf/Brochure_BiogasRoadmap_WEB.pdf.

12. Kelleher Environmental. Benefits to the economy, environment and energy. Canada: The Biogas Association; 2013 November. Available from: http://www.biogasassociation.ca/bioExp/images/uploads/documents/2013/resources/Canadian_Biogas_Study_Summary.pdf.

13. BP. BP Statistical Review of World Energy June 2015. UK: Heriot-Watt University; 2015 June. Available from: http://www.bp.com/content/dam/bp-country/de_de/PDFs/brochures/bp-statistical-review-of-world-energy-2015-full-report.pdf

14. Suruhanjaya Tenaga (Energy Commission). National Energy Balance 2013. Malaysia: Energy Commission, Putrajaya; 2014 March. Available from: http://meih.st.gov.my/documents/10620/167a0433-510c-4a4e-81cd-fb178dcb156f

15. Beer T, Grant T, Brown R. Life-cycle emissions analysis of alternative fuels for heavy vehicles. Australia: Australian Greenhouse Office; 2000. 148p. (CSIRO Atmospheric Research report; no. C/0411/1.1/F2).

16. Van der Meijden CM, Veringa H, Vreugdenhill BJ, et al. (2009) Production of bio-methane from woody biomass. Available from: http://www.ecn.nl/docs/library/report/2009/m09086.pdf.

17. Xie H, Yu Q, Wei M, et al. (2015) Hydrogen production from steam reforming of simulated bio-oil over Ce-Ni/Co catalyst with in continuous CO2 capture. Int j hydrogen energ 40: 1420-1428.    

18. Md Zin R, Lea-Langton A, Dupont V, et al. (2012) High hydrogen yield and purity from palm empty fruit bunch and pine pyrolysis oils. Int j hydrogen energ 37: 10627-10638.    

19. Remon J, Broust F, Volle G, et al. (2015) Hydrogen production from pine and poplar bio-oils by catalytic steam reforming. Influence of the bio-oil composition on the process. Int j hydrogen energ 40: 5593-5608.

20. Xie H, Yu Q, Wang K, et al. (2014) Thermodynamic analysis of hydrogen production from model compounds of bio-oil through steam reforming. Environ prog sustain energy 33: 1008-1016.    

21. Department of Energy and Climate Change. Digest of United Kingdom Energy Statistics 2014. London: The National Archives; 2014. Available from: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/338750/DUKES_2014_printed.pdf

22. Oh TH, Pang SH, Chua SC (2010) Energy policy and alternative energy in Malaysia: Issues and challenges for sustainable growth. Renew sust energ rev 14: 1241-1252.    

23. Hosseini SE, Abdul Wahid M (2013) Feasibility study of biogas production and utilization as a source of renewable energy in Malaysia. Renew sust energ rev 19: 454-462.    

24. Subramaniam V, Ngan MA, May CY, et al. (2008) Environmental performance of the milling process of Malaysian palm oil using the life cycle assessment approach. American j environ sci 4: 310-315.    

25. Prasertsan S, Prasertsan P (1996) Biomass residues from palm oil mills in Thailand: An overview on quantity and potential usage. Biomass bioenerg 11: 387-395.    

26. Van der Meijden CM, Veringa HJ, Rabou LPLM (2010) The production of synthetic natural gas (SNG): A comparison of three wood gasification systems for energy balance and overall efficiency. Biomass bioenerg 32: 302-311

27. Ni M, Leung DYC, Leung MKH, et al. (2006) An overview of hydrogen production from biomass. Fuel process technol 87: 461-472.    

28. Bridgewater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Biomass bioenerg 38: 68-94.    

29. Sukiran MA, Chin CM, Abu Bakar NK (2009) Bio-oils from pyrolysis of oil palm empty fruit bunches. American j appl sci 6: 869-875.    

30. Abdullah N, Sulaiman F, Gerhauser H (2011) Characterisation of oil palm empty fruit bunches for fuel application. J phys sci 22: 1-24.

31. Abdullah N, Gerhauser H, Bridgwater AV (2007) Bio-oil from fast pyrolysis of oil palm empty fruit bunches. J phys sci 18: 57-74.

32. Gu H, Song G, Xiao J, et al. (2013) Thermodynamic analysis of the biomass-to-synthetic natural gas using chemical looping technology with CaO sorbent. Energ fuel 27: 4695-4704.    

33. Zeleznik FJ, Gordon S. An analytical investigation of three general methods of calculating chemical-equilibrium compositions. Ohio (US): National Aeronautics and Space Administration (US); 1960. 37p. (NASA publication; no. NASA TN D-43).

34. Gordon S, McBride BJ. Computer program for calculation of complex chemical equilibrium compositions and applications: I. Analysis. Ohio (US): National Aeronautics and Space Administration (US); 1994. 58p. (NASA publication; no. NASA RP-1311).

35. Dupont V, Twigg MV, Rollinson AN, et al. (2013) Thermodynamics of hydrogen production from urea by steam reforming with and without in situ carbon dioxide sorption. Int j hydrogen energ 38: 10260-10269.    

36. Wang Q, Luo J, Zhong Z, et al. (2011) CO2 capture by solid adsorbents and their applications: current status and new trends. Energ environ sci 4: 42-55.    

37. Blamey J, Manovic V, Anthony EJ, et al. (2015) On steam hydration of CaO-based sorbent cycled for CO2 capture. Fuel 150: 269-277.    

Copyright Info: © 2015, Hafizah Abdul Halim Yun, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved