Research article Topical Sections

Functional characterizations of polyethylene terephthalate-degrading cutinase-like enzyme Cut190 mutants using bis(2-hydroxyethyl) terephthalate as the model substrate

  • Received: 17 October 2018 Accepted: 13 December 2018 Published: 17 December 2018
  • A mutant of cutinase-like enzyme from Saccharomonospora viridis AHK190, Cut190_S226P/R228S, designated as Cut190*, possesses high-thermal stability and has high polyethylene terephthalate (PET)-degrading activity. The functional characterizations of PET-degrading enzymes are generally conducted using accessible substrates such as poly(butylene succinate-co-adipate) (PBSA) and p-nitrophenyl butyrate (pNPB), even though their structures are different from that of PET. Bis(2-hydroxyethyl) terephthalate (BHET) is a component of PET, and the structure is similar to that of PET compared to PBSA and pNPB. Therefore, the analysis using BHET as the substrate is important to evaluate effective PET degradation. In this study, we analyzed the enzymatic activity of Cut190* using BHET under various conditions including Ca2+ concentration and pressure. Although terephthalate was supposed to be the final product, the intermediate product, mono(2-hydroxyethyl) terephthalate (MHET), was the only product generated, possibly due to the low binding affinity of MHET. The Cut190* activity towards BHET was observed even in the absence of Ca2+ and increased with increasing Ca2+ concentration, which is similar to its activity towards pNPB, but different from its activity towards PBSA. The difference can be attributed to the size of substrates. We also analyzed the activities of Cut190* and another high-activity mutant, Cut190*Q138A/D250C-E296C, under high pressures up to 400 MPa. BHET was non-enzymatically hydrolyzed under high pressure at 37 ℃. Enzyme activities were maintained under high pressures, and degradation of BHET in the presence of enzyme was higher than that in the absence of enzyme. Furthermore, the structural analysis of Cut190* under high pressure using Fourier transform infrared spectroscopy showed that most of the enzyme molecules were populated in the native structure below 400 MPa. These results indicate that BHET can contribute to the effective functional analysis of PET-degrading enzyme, and the combination of enzyme and pressure can lead to eco-friendly PET degradation.

    Citation: Yoshiji Hantani, Hiroshi Imamura, Tsubasa Yamamoto, Akane Senga, Yuri Yamagami, Minoru Kato, Fusako Kawai, Masayuki Oda. Functional characterizations of polyethylene terephthalate-degrading cutinase-like enzyme Cut190 mutants using bis(2-hydroxyethyl) terephthalate as the model substrate[J]. AIMS Biophysics, 2018, 5(4): 290-302. doi: 10.3934/biophy.2018.4.290

    Related Papers:

  • A mutant of cutinase-like enzyme from Saccharomonospora viridis AHK190, Cut190_S226P/R228S, designated as Cut190*, possesses high-thermal stability and has high polyethylene terephthalate (PET)-degrading activity. The functional characterizations of PET-degrading enzymes are generally conducted using accessible substrates such as poly(butylene succinate-co-adipate) (PBSA) and p-nitrophenyl butyrate (pNPB), even though their structures are different from that of PET. Bis(2-hydroxyethyl) terephthalate (BHET) is a component of PET, and the structure is similar to that of PET compared to PBSA and pNPB. Therefore, the analysis using BHET as the substrate is important to evaluate effective PET degradation. In this study, we analyzed the enzymatic activity of Cut190* using BHET under various conditions including Ca2+ concentration and pressure. Although terephthalate was supposed to be the final product, the intermediate product, mono(2-hydroxyethyl) terephthalate (MHET), was the only product generated, possibly due to the low binding affinity of MHET. The Cut190* activity towards BHET was observed even in the absence of Ca2+ and increased with increasing Ca2+ concentration, which is similar to its activity towards pNPB, but different from its activity towards PBSA. The difference can be attributed to the size of substrates. We also analyzed the activities of Cut190* and another high-activity mutant, Cut190*Q138A/D250C-E296C, under high pressures up to 400 MPa. BHET was non-enzymatically hydrolyzed under high pressure at 37 ℃. Enzyme activities were maintained under high pressures, and degradation of BHET in the presence of enzyme was higher than that in the absence of enzyme. Furthermore, the structural analysis of Cut190* under high pressure using Fourier transform infrared spectroscopy showed that most of the enzyme molecules were populated in the native structure below 400 MPa. These results indicate that BHET can contribute to the effective functional analysis of PET-degrading enzyme, and the combination of enzyme and pressure can lead to eco-friendly PET degradation.


    加载中
    [1] Chen S, Su L, Chen J, et al. (2013) Cutinase: characteristics, preparation, and application. Biotechnol Adv 31: 1754–1767. doi: 10.1016/j.biotechadv.2013.09.005
    [2] Wei R, Zimmermann W (2017) Biocatalysis as a green route for recycling the recalcitrant plastic polyethylene terephthalate. Microb Biotechnol 10: 1302–1307. doi: 10.1111/1751-7915.12714
    [3] Zimmermann W, Billig S (2010) Enzymes for the biofunctionalization of poly(ethylene terephthalate). Adv Biochem Eng Biotechnol 125: 97–120.
    [4] Kawai F, Oda M, Tamashiro T, et al. (2014) A novel Ca2+-activated, thermostabilized polyesterase capable of hydrolyzing polyethylene terephthalate from Saccharomonospora viridis AHK190. Appl Microbiol Biotech 98: 10053–10064. doi: 10.1007/s00253-014-5860-y
    [5] Oda M, Yamagami Y, Oida I, et al. (2018) Enzymatic hydrolysis of PET: Functional roles of three Ca2+ ions bound to a cutinase-like enzyme, Cut190*, and its engineering for improved activity. Appl Microbiol Biotech 102: 10067–10077. doi: 10.1007/s00253-018-9374-x
    [6] Miyakawa T, Mizushima H, Ohtsuka J, et al. (2015) Structural basis for the Ca2+-enhanced thermostability and activity of PET-degrading cutinase from Saccharomonospora viridis AHK190. Appl Microbiol Biotech 99: 4297–4307. doi: 10.1007/s00253-014-6272-8
    [7] Kawabata T, Oda M, Kawai F (2017) Mutational analysis of cutinase-like enzyme, Cut190, based on the 3D docking structure with model compounds of polyethylene terephthalate. J Biosci Bioeng 124: 28–35. doi: 10.1016/j.jbiosc.2017.02.007
    [8] Inaba S, Kamiya N, Bekker GJ, et al. (2018) Folding thermodynamics of PET-hydrolyzing enzyme Cut190 depending on Ca2+ concentration. J Therm Anal Calorim.
    [9] Numoto N, Kamiya N, Bekker GJ, et al. (2018) Structural dynamics of the PET-degrading cutinase-like enzyme from Saccharomonospora viridis AHK190 in substrate-bound states elucidates the Ca2+ driven catalytic cycle. Biochemistry 57: 5289–5300. doi: 10.1021/acs.biochem.8b00624
    [10] Masson P, Tonello C, Balny C (2001) High-pressure biotechnology in medicine and pharmaceutical science. J Biomed Biotechnol 1: 85–88. doi: 10.1155/S1110724301000158
    [11] Buckow R, Weiss U, Heinz V, et al. (2007) Stability and catalytic activity of -amylase from barley malt at different pressure-temperature conditions. Biotechnol Bioeng 97: 1–11. doi: 10.1002/bit.21209
    [12] Eisenmenger MJ, Reyes-De-Corcuera JI (2009) High pressure enhancement of enzymes: A review. Enzyme Microb Technol 45: 331–347. doi: 10.1016/j.enzmictec.2009.08.001
    [13] Bamdad F, Bark S, Kwon CH, et al. (2017) Anti-inflammatory and antioxidant properties of peptides released from β-lactoglobulin by high hydrostatic pressure-assisted enzymatic hydrolysis. Molecules 22: E949. doi: 10.3390/molecules22060949
    [14] Quartinello F, Vajnhandl S, Volmajer Valh J, et al. (2017) Synergistic chemo-enzymatic hydrolysis of poly(ethylene terephthalate) from textile waste. Microb Biotechnol 10: 1376–1383. doi: 10.1111/1751-7915.12734
    [15] Yamanis J, Vilenchich R, Adelman M (1975) Gas-liquid chromatography of silylated glycols and terephthalate esters. J Chromatogr A 108: 79–84. doi: 10.1016/S0021-9673(00)97490-9
    [16] Dzwolak W, Kato M, Taniguchi Y (2002) Fourier transform infrared spectroscopy in high-pressure studies on proteins. Biochim Biophys Acta 1595: 131–144. doi: 10.1016/S0167-4838(01)00340-5
    [17] Imamura H, Isogai Y, Kato M (2012) Differences in the structural stability and cooperativity between monomeric variants of natural and de novo Cro proteins revealed by high-pressure Fourier transform infrared spectroscopy. Biochemistry 51: 3539–3546. doi: 10.1021/bi2019223
    [18] Wong PTT, Moffatt D (1989) A new internal pressure calibrant for high-pressure infrared spectroscopy of aqueous systems. Appl Spectrosc 43: 1279–1281. doi: 10.1366/0003702894203642
    [19] Savitzky A, Golay MJE (1964) Smoothing and differentiation of data by simplified least squares procedures. Anal Chem 36: 1627–1639. doi: 10.1021/ac60214a047
    [20] Barth A, Zscherp C (2002) What vibrations tell us about proteins. Q Rev Biophys 35: 369–430. doi: 10.1017/S0033583502003815
    [21] Byler DM, Susi H (1986) Examination of the secondary structure of proteins by deconvolved FTIR spectra. Biopolymers 25: 469–487. doi: 10.1002/bip.360250307
    [22] Torii H, Tasumi M (1992) Model calculations on the amide-I infrared bands of globular proteins. J Chem Phys 96: 3379–3387. doi: 10.1063/1.461939
    [23] Ganim Z, Chung HS, Smith AW, et al. (2008) Amide I two-dimensional infrared spectroscopy of proteins. Acc Chem Res 41: 432–441. doi: 10.1021/ar700188n
    [24] Koschorreck K, Liu D, Kazenwadel C, et al. (2010) Heterologous expression, characterization and site-directed mutagenesis of cutinase CUTAB1 from Alternaria brassicicola. Appl Microbiol Biotechnol 87: 991–997. doi: 10.1007/s00253-010-2533-3
    [25] Chen S, Tong X, Woodard RW, et al. (2008) Identification and characterization of bacterial cutinase. J Biol Chem 283: 25854–25862. doi: 10.1074/jbc.M800848200
    [26] Kwon MA, Kim HS, Yang TH, et al. (2009) High-level expression and characterization of Fusarium solani cutinase in Pichia pastoris. Protein Expression Purif 68: 104–109. doi: 10.1016/j.pep.2009.06.021
    [27] Kim HR, Song WS (2010) Optimization of papain treatment for improving the hydrophilicity of polyester fabrics. Fibers Polym 11: 67–71. doi: 10.1007/s12221-010-0067-z
    [28] Billig S, Oeser T, Birkemeyer C, et al. (2010) Hydrolysis of cyclic poly(ethylene terephthalate) trimers by a carboxylesterase from Thermobifida fusca KW3. Appl Microbiol Biotechnol 87: 1753–1764. doi: 10.1007/s00253-010-2635-y
    [29] Barth M, Oeser T, Wei R, et al. (2015) Effect of hydrolysis products on the enzymatic degradation of polyethylene terephthalate nanoparticles by a polyester hydrolase from Thermobifida fusca. Biochem Eng J 93: 222–228. doi: 10.1016/j.bej.2014.10.012
    [30] Joo S, Cho IJ, Seo H, et al. (2018) Structural insight into molecular mechanism of poly(ethylene terephthalate) degradation. Nat Commun 9: 382. doi: 10.1038/s41467-018-02881-1
    [31] Gall A, Ellervee A, Sturgis JN, et al. (2003) Membrane protein stability: high pressure effects on the structure and chromophore-binding properties of the light-harvesting complex LH2. Biochemistry 42: 13019–13026. doi: 10.1021/bi0350351
    [32] Dirix C, Duvetter T, Loey AV, et al. (2005) The in situ observation of the temperature and pressure stability of recombinant Aspergillus aculeatus pectin methylesterase with Fourier transform IR spectroscopy reveals an unusual pressure stability of β-helices. Biochem J 392: 565–571. doi: 10.1042/BJ20050721
  • biophy-05-04-290-s001.pdf
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6464) PDF downloads(2061) Cited by(11)

Article outline

Figures and Tables

Figures(5)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog