Editorial board

  E-mail   Print

Yaroslava G. Yingling (Editor in Chief)  

Department of Materials Science and Engineering, North Carolina State University, Campus Box 7907, Raleigh, NC 27695-7907, USA

Dr. Xu Guo (Managing Editor)   

Managing and Operation (Journal)

Dr. Shengjiao Pang (Editor)   

Managing and Operation (Journal)


Mario Beiner  

Fraunhofer Institute for Microstructure of Materials and Systems IMWS, Walter-Hülse-Str. 1 | 06120 Halle (Saale) | Germany

J. Paige Buchanan  

US Army Corps of Engineers, Engineering Research and Development Center, Vicksburg, MS, USA

Kaiyong Cai  

Key Laboratory of Biorheological Science and Technology, Ministry of Education, College of Bioengineering, Chongqing University, Chongqing, 400044, P.R. China

Miguel A. Camblor  

Instituto de Ciencia de Materiales de Madrid, ICMM-CSIC, Sor Juana Inés de la Cruz, 3, 28039 Madrid, Spain

Surojit Chattopadhyay  

Institute of Biophotonics, National Yang Ming University, Taipei-112, Taiwan

Daolun Chen  

Department of Mechanical and Industrial Engineering, Ryerson University 350 Victoria Street, Toronto, Ontario M5B 2K3, Canada

Chong Cheng  

Department of Chemical and Biological Engineering University at Buffalo, The State University of New York Buffalo, NY 14260-4200, USA

In-Suk Choi  

High Temperature Energy Materials Research Center, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea

Phillip Y. K. Choi  

Donadeo Innovation Centre for Engineering, Department of Chemical & Materials Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 1H9

Amitava Choudhury  

Department of Chemistry, Missouri S & T, Rolla, MO 65409, USA

John D. Clayton  

Impact Physics Department, RDRL-WMP-C, US ARL Aberdeen Proving Ground, MD 21005-5066 USA

Pantaleo Davide Cozzoli  

Department of Mathematics and Physics, University of Salento, Via Arnesano - 73100 Lecce (Italy); CNR NANOTEC - Institute of Nanotechnology, c/o campus Ecotekne, Via Monteroni - 73100 Lecce (Italy)

A. Cremades  

Departamento de Física de Materiales, Facultad de Ciencias Físicas, Universidad Complutense de Madrid, 28040 Madrid, Spain

Giuseppe Cruciani  

Department of Physics and Earth Sciences, University of Ferrara, Via Saragat 1 – Bld B Room 209, I-44122 Ferrara, Italy

NilY R. Dan  

Chemical and Biological Engineering, Drexel University, 3141 Chestnut St., Philadelphia, PA 19104, USA

Darren Sun Delai  

School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798, Singapore

Marco Evangelisti  

Instituto de Ciencia de Materiales de Aragón, CSIC ? Universidad de Zaragoza, Departamento de Física de la Materia Condensada, 50009 Zaragoza, Spain

Antonio Facchetti  

Department of Chemistry and the Materials Research Center, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208-3113, USA

Peter Fischer  

Center for X-ray Optics, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720, USA

Francisco Gallego-Gómez  

Instituto de Ciencia de Materiales de Madrid, C/Sor Juana Inés de la Cruz 3, 28049 Madrid, Spain

Juan Cabanillas Gonzalez  

Instituto Madrile?o de Estudios Avanzados en Nanociencia, (IMDEA-Nanociencia), Cantoblanco, 28049–Madrid, Spain

Xuefeng Guo  

College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China

Anders Hagfeldt   

Department of Physical and Analytical Chemistry Uppsala University, Box 259, 75105 Uppsala (Sweden)

Chung-Souk Han  

Department of Mechanical Engineering, University of Wyoming, USA

Christoph Janiak  

Institut für Anorganische Chemie und Strukturchemie, Universitaet Duesseldorf, Universitaetsstrasse, D-40225 Düsseldorf, Germany

Animesh Jha  

The Institute for Materials Research, University of Leeds, Leeds, LS2 9JT, UK

Yang Jiao  

Materials Science and Engineering, School for Engineering and Matter, Transport and Energy, Arizona State University, Tempe, AZ 85287-6106, USA

Kourosh Kalantar-zadeh  

Micro/nanoelectronics and Sensors Group Leader School of Electrical and Computer Eng., RMIT University, City Campus, Melbourne, Australia

Susan M. Kauzlarich  

Department of Chemistry, University of California, One Shields Ave, Davis, California 95616, United States

Guido Kickelbick  

Inorganic Solid State Chemistry, Saarland University, Am Markt Zeile 3, 66125 Saarbrücken, Germany

Ji-Seon Kim  

Department of Physics & Centre for Plastic Electronics, Imperial College London, London SW7 2AZ, United Kingdom

Jong Hak Kim  

Department of Chemical and Biomolecular Engineering, Yonsei University, 262 Seongsanno Seodaemun-gu, Seoul 120-749, South Korea

Pooi See Lee  

Division of Materials Technology, School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore

Yong Lei  

Fachgebietsleiter (Head), Fachgebiet 3D-Nanostrukturierung (Chair of 3D-Nanostructuring), Institute of Physics, Faculty of Mathemat-ics and Nature Sciences, Technical University of Ilmenau (Technische Universität Ilmenau), Germany

Dawen Li  

Electrical & Computer Engineering, Box 870286, University of Alabama, Tuscaloosa, AL 35487-0286, USA

Sean Li   

School of Materials Science and Engineering, The University of New South Wales, Sydney, NSW 2052, Australia

Lin Liu  

Department of Materials Science and Engineering and State Key Lab for Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, People's Republic of China

Enzo Martinelli  

Department of Civil Engineering, University of Salerno, Via Giovanni Pallo II, 132 84084 Fisciano (SA), Italy

Klaus Müllen  

Max Planck Institute for Polymer Research Ackermannweg 10, D-55128 Mainz ,Germany

Kyung-Wan Nam  

Chemistry Department, Brookhaven National Laboratory, Upton, New York, 11973, United States

Franck Natali  

School of Chemical and Physical Sciences , Victoria University, Wellington, New Zealand

Manashi Nath  

Department of Chemistry, Missouri University of Science and Technology, Rolla, Missouri 65409, United States

Shigenobu Ogata  

Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, Osaka University, Osaka 560-8531, Japan

Kostya Ostrikov  

Plasma Nanoscience Centre Australia (PNCA), CSIRO Materials Science and Engineering, P.O. Box 218, Lindfield, NSW 2070, Australia

Jianyong Ouyang  

Department of Materials and Engineering, National University of Singapore, Singapore 117574, Singapore

Amir Pakdel  

International Centre for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Namiki 1-1, Tsukuba 305-0044, Japan

Dario Pasini  

Department of Chemistry, University of Pavia, Via Taramelli, 10 - 27100 - Pavia – Italy

Srikanth Patala  

Materials Science and Engineering, North Carolina State University, 911 Partners Way, Engineering Building I, Room 3002, Raleigh, NC 27606

Matthew J. Panzer  

Department of Chemical & Biological Engineering, Tufts University, Medford, Massachusetts 02155, United States

Durga Paudyal  

Division of Materials Sciences and Engineering, The Ames Laboratory, US Department of Energy, Iowa State University, Ames, IA 50011-3020, USA

Valeri Petkov  

Department of Physics, Central Michigan University, Mt. Pleasant, Michigan 48859, United States

Arno Pfitzner  

Institute for Inorganic Chemistry, University of Regensburg, Universitaetsstrasse 31, D-93040 Regensburg, Germany

Gustavo Portalone  

Department of Chemistry, 'La Sapienza' University of Rome, 00185 Rome, Italy

Sandipan Pramanik  

Department of Electrical and Computer Engineering, University of Alberta, Canada

Faxiang Qin  

1D Nanomaterials Group, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan

Qing Hua Qin  

Leader of Materials & Manufacturing Division, Research School of Engineering, College of Engineering and Computer Science, The Australian National University, Canberra ACT 2601, Australia

Bhakta B. Rath  

US Naval Research Laboratory, Washington, DC 20375-5341,USA

Mauro Ricotta  

Department of Industrial Engineering, University of Padova, Italy

Jesús Ma. Rincón  

Instituto E. Torroja de Ciencias de la Construcción, CSIC, Madrid, Spain

Jacobo Santamaria  

Applied Physics Department, Universidad Complutense de Madrid, Campus Moncloa, Madrid, 28040, Spain

Hélder Almeida Santos  

Division of Pharmaceutical Technology, Faculty of Pharmacy, University of Helsinki, FI-00014, Finland

Atsushi Shishido  

Chemical Resources Laboratory, Tokyo Institute of Technology, R1-12, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503, Japan

Adam Z. Stieg  

California NanoSystems Institute, University of California, Los Angeles, CA 90095, USA

Nian X. Sun  

Electrical and Computer Engineering Department, Northeastern University 360 Huntington Avenue, Boston, MA 02115, USA

Luyi Sun  

Department of Chemical & Biomolecular Engineering and Polymer Program, Institute of Materials Science, University of Connecticut, Storrs, CT 06269-3136, USA

Yugang Sun  

Department of Chemistry, Temple University Philadelphia, PA 19122, USA

Ben Zhong Tang  

Department of Chemistry, Institute of Molecular Functional Materials, The Hong Kong University of Science & Technology (HKUST), Clear Water Bay, Kowloon, Hong Kong (P. R. China)

Franklin (Feng) Tao  

Department of Chemical & Petroleum Engineering and Department of Chemistry, University of Kansas, USA

Mukundan Thelakkat  

Applied Functional Polymers, University of Bayreuth, Universitätsstraße 30, 95447 Bayreuth, Germany

Alexander Umantsev  

Department of Chemistry/Physics, Fayetteville State University, Fayetteville, NC 28301, USA

Kalman Varga  

Department of Physics and Astronomy, Vanderbilt University, Nashville, USA

Hao Wang  

Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China

Huanting Wang  

Department of Chemical Engineering, Associate Dean International of Faculty of Engineering, Monash University, Clayton, Victoria 3800, Australia

Hui Wang  

Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208, USA

Qiang (David) Wang  

Department of Chemical and Biological Engineering and School of Biomedical Engineering, Colorado State University

Haiming Wen  

Department of Physics, Nuclear and Electrical Engineering, Idaho State University, Idaho Falls, ID 83402, USA

Kai Xiao   

Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Bldg 8610, MS-6494, Oak Ridge, TN 37831-6494, USA

Yonggang Yang  

Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China

Reza Younesi  

Department of Chemistry-Angstrom Laboratory, Uppsala University, Box 538, SE-75121 Uppsala, Sweden

Junjie Zhang   

Center for Precision Engineering, Harbin Institute of Technology, People's Republic of China

Qinyuan Zhang  

MOE Key Lab of Specially Functional Materials and Institute of Optical Communication Materials, South China University of Technology, Guangzhou 510641, PR China

Jianxi Zhu  

Key Laboratory of Mineralogy and Metallogeny, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 511 Kehua St. Wushan, Guangzhou, 510640, China

Zheng Hong (George) Zhu  

Department of Mechanical Engineering, York University, 435C Bergeron Centre for Engineering Excellence, 4700 Keele Street • Toronto ON • Canada


Open Access Journals
Blog:
More
Open Access Journals