Loading [Contrib]/a11y/accessibility-menu.js
Research article Special Issues

Ethanol production from hot-water sugar maple wood extract hydrolyzate: fermentation media optimization for Escherichia coli FBWHR

  • We report the first time statistical study of the optimization for ethanol production from hot-water sugar maple hemicellulosic wood hydrolyzate by Escherichia coli FBWHR. Response surface methodology was employed to investigate the effect of fermentation media on the ethanol production from concentrated hot-water sugar maple hemicellulosic wood extract hydrolyzate by Escherichia coli FBWHR. The critical media components were firstly selected according to Plackett–Burman design and further optimized by central composite design. Based on the response surface analysis, the optimum concentrations of the significant components were obtained: yeast extract, 10.19 g/L; tryptone, 14.55 g/L; Na2HPO4·7H2O, 23.21 g/L; KH2PO4, 5 g/L and NH4Cl, 2 g/L. An ethanol concentration of 15.23 ± 0.21 g/L was achieved under the optimized media, which agreed with the predicted value. Ethanol production was enhanced to 22.18 ± 0.13 g/L by scaling up the fermentation from shaker flask to 1.3 L bioreactor.

    Citation: Yang Wang, Chenhui Liang, Shijie Liu. Ethanol production from hot-water sugar maple wood extract hydrolyzate: fermentation media optimization for Escherichia coli FBWHR[J]. AIMS Environmental Science, 2015, 2(2): 269-281. doi: 10.3934/environsci.2015.2.269

    Related Papers:

    [1] Muhammad Shahid Iqbal, Muhammad Nauman Ahmad, Nynke Hofstra . The Relationship between Hydro-Climatic Variables and E. coli Concentrations in Surface and Drinking Water of the Kabul River Basin in Pakistan. AIMS Environmental Science, 2017, 4(5): 690-708. doi: 10.3934/environsci.2017.5.690
    [2] Riri Novita Sunarti, Sri Budiarti, Marieska Verawaty, Bayo Alhusaeri Siregar, Poedji Loekitowati Hariani . Diversity of Antibiotic-Resistant Escherichia coli from Rivers in Palembang City, South Sumatra, Indonesia. AIMS Environmental Science, 2022, 9(5): 721-734. doi: 10.3934/environsci.2022041
    [3] Cyril A. Cabello, Nelfa D. Canini, Barbara C. Lluisma . Water quality assessment of Dodiongan Falls in Bonbonon, Iligan City, Philippines. AIMS Environmental Science, 2022, 9(4): 526-537. doi: 10.3934/environsci.2022031
    [4] Beatriz Gullón, Belén Gómez, José Luis Alonso, Remedios Yáñez . Environmentally friendly technologies for obtaining high sugars concentrations from invasive woody species. AIMS Environmental Science, 2015, 2(4): 884-898. doi: 10.3934/environsci.2015.4.884
    [5] M.A. Rahim, M.G. Mostafa . Impact of sugar mills effluent on environment around mills area. AIMS Environmental Science, 2021, 8(1): 86-99. doi: 10.3934/environsci.2021006
    [6] Bruce S Dien, Patricia J. Slininger, Cletus P. Kurtzman, Bryan R. Moser, Patricia J. O’Bryan . Identification of superior lipid producing Lipomyces and Myxozyma yeasts. AIMS Environmental Science, 2016, 3(1): 1-20. doi: 10.3934/environsci.2016.1.1
    [7] Delianis Pringgenies, Wilis Ari Setyati, Nirwani Soenardjo, Rini Pramesti . Investigation of extra-cellular protease in indigenous bacteria of sea cucumbers as a candidate for bio-detergent material in bio-industry. AIMS Environmental Science, 2020, 7(4): 335-349. doi: 10.3934/environsci.2020022
    [8] Vera Barbosa, Madalena Morais, Aurora Silva, Cristina Delerue-Matos, Sónia A. Figueiredo, Valentina F. Domingues . Comparison of antibiotic resistance in the influent and effluent of two wastewater treatment plants. AIMS Environmental Science, 2021, 8(2): 101-116. doi: 10.3934/environsci.2021008
    [9] Giovanni L. Russo, Antonio L. Langellotti, Maria Oliviero, Marco Baselice, Raffaele Sacchi, Paolo Masi . Valorization of second cheese whey through cultivation of extremophile microalga Galdieria sulphuraria. AIMS Environmental Science, 2021, 8(5): 435-448. doi: 10.3934/environsci.2021028
    [10] Meriatna, Zulmiardi, Lukman Hakim, Faisal, Suryati, Mizwa Widiarman . Adsorbent performance of nipa (nypafruticans) frond in methylene blue dye degradation: Response surface methodology optimization. AIMS Environmental Science, 2024, 11(1): 38-56. doi: 10.3934/environsci.2024003
  • We report the first time statistical study of the optimization for ethanol production from hot-water sugar maple hemicellulosic wood hydrolyzate by Escherichia coli FBWHR. Response surface methodology was employed to investigate the effect of fermentation media on the ethanol production from concentrated hot-water sugar maple hemicellulosic wood extract hydrolyzate by Escherichia coli FBWHR. The critical media components were firstly selected according to Plackett–Burman design and further optimized by central composite design. Based on the response surface analysis, the optimum concentrations of the significant components were obtained: yeast extract, 10.19 g/L; tryptone, 14.55 g/L; Na2HPO4·7H2O, 23.21 g/L; KH2PO4, 5 g/L and NH4Cl, 2 g/L. An ethanol concentration of 15.23 ± 0.21 g/L was achieved under the optimized media, which agreed with the predicted value. Ethanol production was enhanced to 22.18 ± 0.13 g/L by scaling up the fermentation from shaker flask to 1.3 L bioreactor.


    1. Introduction

    Development of bio-fuels has recently drawn attention due to the depletion of crude oil, increased oil prices and environmental benefits [1, 2, 3, 4]. For example, ethanol as a renewable energy source as well as an important industrial ingredient has been produced from different kinds of raw materials such as urban waste, agricultural residue and forest materials which are counted low-cost lignocellulosic biomass [5, 6]. Woody biomass, comprising about 40% hemicellulose with the major components of hexoses (glucose, galactose, mannose, rhamnose) and pentoses (xylose and arabinose), is the most abundant organic source on Earth and has been widely studied in bio-ethanol production process [7, 8, 9, 10]. Recently, our group has reported an ethanol batch fermentation using a new improved strain adapted from FBHW, E. coli FBWHR, from hot-water sugar maple wood extract hydrolyzate and its kinetic study [11].

    The optimization of fermentation media is very important to the ethanol process by possibly improving the consumption of the woody biomass constituents and maximizing the ethanol production. The classical method of “one factor at a time” is laborious and time-consuming, especially when the number of variables is large. Design of experiments (DoE) is a structured and robust methodology for optimizing fermentation processes and media and well documented in the literature [12, 13, 14]. Plackett-Burman (PB) design, involving a two-level fractional factorial saturated design, tests the largest number of factor effects with the least number of observations and screens for significant factors [15]. It has been proved to be useful in evaluating the relative significance of variables and screening a large number of media components [16, 17]. Response surface methodology (RSM) is followed for identifying the effect of individual variables and for seeking the optimal fermentation conditions for a multivariable system with minimum numbers of experiments efficiently. It has been successfully adopted to optimize the production of ethanol by different microorganisms [18, 19, 20, 21]. Central composite design (CCD) is the most widely used response surface design that provides statistical models which help in understanding the interactions among the parameters that have been optimized [22, 23]. RSM uses CCD to fit a model by the least squares technique. Three major steps are involved in RSM: performing the statistically designed experiments, estimating the coefficients in a mathematical model, and predicting the response and checking the adequacy of the model.

    However, there are no literature reports on media optimization of ethanol fermentation from hot-water sugar maple hemicellulosic wood extract hydrolyzate. In this study, we report the optimization of the fermentation media specifically comprising hot-water sugar maple hemicellulosic wood extract hydrolyzate and a new improved strain adapted from FBHW, E. coliFBWHR by statistical design of experiments. To enhance the production of ethanol using RSM, a PB design was performed to screen for components of the production medium that had significant effects on the ethanol production. A CCD was then employed to optimize the significant factors identified by PB design to further increase ethanol production. Finally, batch fermentation was scaled up in a 1.3 L fermenter.

    2. Material and Methods

    2.1. Sugar maple wood extract hydrolyzate, E. coli FBWHR strain and cell growth

    The details of preparation of sugar maple wood extract hydrolyzate, microorganism and cell growth, strain adaptation, and analytical methods have been reported by Wang et al. [11]. The hot-water extraction was carried out in a 1.84 m3 digester with a wood to liquor ratio of 1:4 at about 160 °C for 2 h, followed by Ultra-filtration and Nano-filtration. The concentrated extracts were hydrolyzed at 135 °C for 25 min with 1 wt% sulfuric acid added to remove lignin. Hydrolyzate was neutralized by Ca(OH)2 and then fractionated by Nano-filtration. According to previous investigation, hot-water sugar maple hemicellulosic wood extracts hydrolyzate used in this study contained six monosaccharides, primarily xylose and minor amounts of glucose, mannose, arabinose, galactose and rhamnose, other compounds such as phenolics and aromatics, and several trace metals [11]. E. coli FBWHR was grown in 250 mL shaker flasks containing 100 mL sterile liquid medium (10 g/L tryptone, 5 g/L yeast extract, and 5 g/L NaCl) adjusted to a pH of 7.0, and supplemented with 10 g/L xylose and 20 mg/L tetracycline. The liquid culture was incubated at 35 °C for 12-14 hours on an incubator shaker with a speed of 160 rpm. After growth, 5 mL of culture was used to inoculate 100 mL of sterile fermentation media.

    2.2. Ethanol fermentation conditions

    2.2.1. Ethanol fermentation in shaker flasks

    Concentrated hot-water sugar maple wood extract hydrolyzate was diluted to 30% (v/v) with different concentrations of defined media solutions (100 mL), and then transferred into a 250 mL shake flask. The pH of the fermentation media was adjusted to 7.0 by addition of ammonia hydroxide. Concentrated hot-water sugar maple wood extract hydrolyzate and ammonia hydroxide were filter-sterilized. Other media solutions were autoclaved separately at 121 °C for 15 min. Fermentations studied by RSM were conducted at 35 °C with the incubator shaker at a shaking speed of 160 rpm.

    2.2.2. Ethanol fermentation in bioreactor

    Batch fermentation was scaled up from shaker flasks to a 1.3 L New Brunswick Bioreactor (BIOFLO 110) with a working volume of 800 mL under micro-aerobic condition. Sugar concentration of fermentation media was achieved by diluting concentrated hydrolyzate to 30% (v/v) containing 48.53 g/L total sugar. After cooling, concentrated hydrolyzate was added to the bioreactor and adjusted to pH 7.0 by ammonia hydroxide prior to inoculation. Samples (2 mL) were taken intermittently and centrifuged prior to analysis.

    2.3. Analytical methods

    Cell density (g/L) was estimated by using a predetermined correlation between dry weight cell concentrations (oven dry at 105 °C) versus optical density. Ethanol concentration was measured by GC using Thermo Scientific Focus GC systems equipped with a Triplus automatic sampler and a TRACE TR-WaxMS (30 m × 0.25 mm × 0.25 μm) GC column. Sugar concentrations were determined by nuclear magnetic resonance (NMR) spectroscopy using a modified two dimensional heteronuclear single quantum coherence (HSQC) experiment.

    Element concentrations of the concentrated hot-water sugar maple wood extract hydrolyzate were analyzed by inductively coupled plasma (ICP) on a Perkin Elmer 3300DV Inductively Coupled Plasma Emission Spectrometer. Samples were diluted 100-fold with 2% nitric acid for analysis. The element concentrations were obtained via emissions.

    2.4. Experimental design

    2.4.1. Plackett-Burman (PB) design

    Six medium components (yeast extract, tryptone, Na2HPO4·7H2O, KH2PO4, NH4Cl and NaCl) were chosen in the present study for the effect on the ethanol production by hot-water sugar maple wood extract hydrolyzate. The main effect of variables was firstly determined as follows:

    (1)

    Where, E(xi) represents the effect of variable i; yi+ is the response of the high level of variable i; yi− is the response of the low level of variable i; N stands for the total number of trials.

    The standard error (SE) of the effect was the square root of an effect, and the significance level (p-value) of each variable effect was determined by T-test as follows:

    (2)

    Where, E(xi) represents the effect of variable i; SE is the standard error [17, 24].

    2.4.2. Central composite design (CCD)

    After the critical medium components were screened by PB design, Response Surface Methodology (RSM) was adopted to optimize the concentrations of the components to maximize the production of ethanol. Three components (yeast extract, tryptone, and Na2HPO4·7H2O) that significantly affected the ethanol production were optimized by RSM using a 3-factor-5-level CCD with 6 replications of center points. The CCD matrix included six central points and six axial points, with an axial distance of ±1.68 to make the design orthogonal [25]. In order to develop the second-order regression model, the variables were coded to the following equation:

    (3)

    Where xi and Xi are the dimensionless and the actual values of the independent variable i, X0 is the actual value of the independent variable at the center point, and ΔXi is the step change of Xi corresponding to a unit variation of the dimensionless value. In order to correlate the response variable (i.e., ethanol concnetration) to the independent variables, second-order polynomial model for predicting the optimal point was expressed as follows:

    (4)

    Where Y represents the predicted response, b0 is the interception coefficient, bi is the coefficient of the linear effect, bii is the coefficient of the quadratic effect, bij is the coefficient of the interaction effect when i < j, and k is the numbers of the involved variables.

    2.5. Statistical analysis

    The experiments were carried out in triplicate unless other specified. The average ethanol concentration was used as the dependent variable. The Design-Expert 8.0.7.1 trial software was used for multiple regression analysis of the experimental data. The analysis of variance (ANOVA) was evaluated. The statistical and regression coefficient significance was checked with F-test and t-test, respectively. The multiple coefficients of correlation (R) and the determination coefficient of correlation (R2) were calculated to evaluate the adequacy of the model. The optimum values of the selected variables were obtained by analyzing the response surface plot and solving the regression equation.

    3. Results and Discussion

    3.1 Screening of significant media components that enhance ethanol production

    PB design experiments were performed to select the important fermentation parameters which have significantly improved the ethanol production by E. coli FBWHR. An initial set of six media components with two levels of concentration was proposed with a potential effect on the ethanol fermentation. Yeast extract and tryptone are widely employed as complex sources of peptides, amino acids, vitamins, and trace elements such as magnesium for microorganisms in fermentation media [26, 27]. It has been reported that cells have to synthesize amino acid and vitamin and require more energy and carbon source without the supplement of yeast extract [28]. Na2HPO4, KH2PO4 NH4Cl and NaCl are the typical substances for E. coligrowth. The experimental design matrix based on the Plackett-Burman design was presented in Table 1. Twelve experiments were carried out using different combinations of the variables. The results were analyzed by using the analysis of variance (ANOVA) as appropriate to the experimental design used. The sum of squares, mean squares, F-values and p-values were estimated. It was demonstrated that the model was highly significant with the F-value of 19.39 and a very low probability value of 0.0062 (p-value < 0.05) meaning only a 0.62% chance that a “Model F-Value” this large could occur due to noise. According to the ANOVA results (Table 2), yeast extract, tryptone and Na2HPO4·7H2O had significant positive effects on the ethanol production, because the values of “Prob > F” were less than 0.05. KH2PO4 and NH4Cl also had positive effects but the contributions were not significant, so their concentrations were fixed at the high level and entered to the CCD experiments. NaCl was the only media component that had an insignificantly negative impact and a low level of 0 g/L. Therefore, NaCl was removed from the media fomulation. The determination coefficient (R2) was 0.9714, which meant that the model could explain 97.14% of the total variations in the system. The predicted determination coefficient (Pred R2 = 0.7277) was in reasonable agreement with the adjusted determination coefficient (Adj R2 = 0.9213). The signal to noise ratio was measured by “Adeq Precision”. A ratio greater than 4 is desirable. A ratio of 12.497 indicated an adequate signal,which implied that this model could be used to navigate the design space. The optimum values of yeast extract, tryptone and Na2HPO4·7H2O were further investigated by CCD.

    Table 1. The PB design for screening variables in ethanol production from 30% (v/v) of hot-water sugar maple hemicellulosic wood hydrolysate by E. coli FBWHR.
    Run Levels Yeast Extract (X1), g/L Tryptone (X2), g/L Na2HPO4·7H2O (X3), g/L KH2PO4 (X4), g/L NH4Cl (X5), g/L NaCl (X6), g/L Ethanol concentration, g/L (n = 3)
    −1 1.00 1.00 1.00 1.00 0.50 0.00
    +1 10.00 10.00 20.00 5.00 2.00 10.00
    1 1.00 10.00 1.00 5.00 2.00 0.00 1.56 ± 0.10
    2 1.00 10.00 20.00 5.00 0.50 0.00 5.88 ± 0.24
    3 1.00 1.00 20.00 1.00 2.00 10.00 1.31 ± 0.15
    4 10.00 10.00 1.00 5.00 2.00 10.00 1.09 ± 0.12
    5 1.00 10.00 20.00 1.00 2.00 10.00 6.79 ± 0.18
    6 10.00 1.00 20.00 5.00 0.50 10.00 2.67 ± 0.08
    7 1.00 1.00 1.00 1.00 0.50 0.00 0.28 ± 0.10
    810.00 1.00 1.00 1.00 2.00 0.00 3.74 ± 0.05
    9 10.00 1.00 20.00 5.00 2.00 0.00 3.88 ± 0.15
    10 1.00 1.00 1.00 5.00 0.50 10.00 0.1± 0.05
    11 10.00 10.00 20.00 1.00 0.50 0.00 7.01± 0.20
    12 10.00 10.00 1.00 1.00 0.50 10.00 0.8 ± 0.06
     | Show Table
    DownLoad: CSV
    Table 2. The ANOVA analysis for PB design.
    Source Coefficient Sum of squares df Mean square F-value p-value Probe > F
    Model 67.34 7 9.62 19.39 0.0062
    X1 0.82 1 5.47 11.03 0.0294
    X2 0.95 8.74 1 8.74 17.61 0.0137
    X3 1.59 26.71 1 26.71 53.83 0.0018
    X4 0.089 0.051 1 0.051 0.1 0.7648
    X5 0.8 3.64 1 3.64 7.33 0.0537
    X6 −0.33 1.1 1 1.1 2.22 0.2104
    X2 × X3 1.64 13.09 1 13.09 26.39 0.0068
    Residual 1.98 4 0.5
    Cor Total 69.33 11
    R2 = 0.9714; Pred R2 = 0.7277; Adj R2 = 0.9213; Adeq Precision = 12.497.
     | Show Table
    DownLoad: CSV

    3.2. Optimization of media components for ethanol fermentation

    PB design experiments were performed to select the critical fermentation parameters which have significant effects on ethanol production with E. coli FBWHR. Yeast extract, tryptone, and Na2HPO4·7H2O screened out by PB design were further studied by a five-level three-factor CCD with six replications of center points to enhance the ethanol production. The design matrix of CCD, the variables and the corresponding results were shown in Table 3. The results of the second-order response surface model fitting in the ANOVA were presented in Table 4. The interactive model term yeast extract × tryptone was insignificant, because the p-value was greater than 0.05. All the other model terms were significant, because low p-values (p < 0.05) were obtained. Of the modeled terms, yeast extract, tryptone, Na2HPO4·7H2O, yeast extract × Na2HPO4·7H2O and tryptone × Na2HPO4·7H2O positively affected the ethanol production, while (yeast extract)2, (tryptone)2, and (Na2HPO4·7H2O)2 negatively affected the ethanol production. The coefficient of multiple determination (R2) was found to be 0.9898, which means that the model could explain 98.98% of the total variations in the system. The high value of the adjusted R2 (0.9824) further supported the accuracy of the model. The predicted R2 of 0.9517 was in the reasonable agreement with the adjusted R2 value. Therefore, the results in terms of the production of ethanol can be illustrated by the following quadratic regression equation:

    (5)

    Where, the production of ethanol as Y is a multiple function of yeast extract, trypone and Na2HPO4·7H2O concentrations.

    Table 3. The CCD design for three significant variables screened by PB design in ethanol production from 30% (v/v) of hot-water sugar maple hemicellulosic wood hydrolysate by E. coli FBWHR.
    Run Levels X1, g/L X2, g/L X3, g/L Ethanol concentration, g/L (n = 3)
    1.68214.201.5911.59
    1.0012.50 5.0015.00
    0.00 10.0010.0020.00
    −1.007.5015.0025.00
    −1.682 5.80 18.41 28.41
    1 7.50 5.00 15.00 5.95 ± 0.23
    2 12.50 5.00 15.00 4.58 ± 0.16
    3 7.50 15.00 15.00 7.7 ± 0.28
    4 12.50 15.00 15.00 6.16 ± 0.11
    5 7.50 5.00 25.00 5.68 ± 0.07
    6 12.50 5.00 25.00 9.7 ± 0.30
    7 7.50 15.00 25.00 10.88 ± 0.17
    8 12.50 15.00 25.00 13.8 ± 0.12
    9 5.80 10.00 20.00 3.52 ± 0.25
    10 14.20 10.00 20.00 7.35 ± 0.08
    11 10.00 1.59 20.00 7.04 ± 0.14
    12 10.00 18.41 20.00 13.42 ± 0.12
    13 10.00 10.00 11.59 6.29 ± 0.26
    14 10.00 10.00 28.41 12.21 ± 0.14
    15 10.00 10.00 20.00 13.25 ± 0.08
    16 10.00 10.00 20.00 13.64 ± 0.23
    17 10.00 10.00 20.00 14.05 ± 0.05
    18 10.00 10.00 20.00 13.28 ± 0.07
    19 10.00 10.00 20.00 13.52 ± 0.13
    20 10.00 10.00 20.00 13.98 ± 0.10
     | Show Table
    DownLoad: CSV
    Table 4. The ANOVA analysis and variance analysis for the quadratic response surface model using CCD design.
    ParameterCoefficient Sum of squares df Mean square F-value p-value
    Probe > F
    Intercept 13.62
    X1 0.77 8.03 1 8.03 32.05 0.0002
    X2 1.71 39.96 1 39.96 159.53 < 0.0001
    X3 1.88 48.09 1 48.09 191.98 < 0.0001
    X1 × X2 −0.16 0.2 1 0.2 0.8 0.3907
    X1 × X3 1.23 12.13 1 12.13 48.42 < 0.0001
    X2 × X3 0.75 4.46 1 4.46 17.79 0.0018
    X12 −2.88 119.39 1 119.39 476.67 < 0.0001
    X22 −1.18 20.17 1 20.17 80.52 < 0.0001
    X32 −1.53 33.71 1 33.71 134.6 < 0.0001
    Model 263.6 832.95 133.93 < 0.0001
    Residual 2.71 110.25
    Lack of fit 2.13 60.35 3.07 0.1193
    Pure error 0.58 50.12
    Cor Total 266.3 19
    CV = 5.06; R2 = 0.9898; Pred R2 = 0.9517; Adj R2 = 0.9824; Adeq Precision = 30.568.
     | Show Table
    DownLoad: CSV

    As shown in Table 4, the second-order regression model was statistically valid given an F-value with a low probability value (pmodel < 0.0001). The lack-of-fit value (p = 0.1193) implied the Lack of Fit was not significant relative to the pure error. The low coefficient of variation (CV = 5.06%) demonstrated that the model was precise and reliable.

    The regression equations were represented graphically by three dimensional response surface plots, which were generally used to demonstrate relationships between the response and experimental levels of each variable. Therefore, the maximum production of microbial metabolites can be found by visualization of the optimum levels of each variable through the surface plots [29, 30]. Figure 1 shows a response surface plot of the effect of adding yeast extract and Na2HPO4·7H2O on the production of ethanol with a tryptone concentration of 10 g/L. It can be observed that the ethanol concentration increased at first and then decreased with the concentration increase of yeast extract when the concentration of Na2HPO4·7H2O varied from 15 g/L to 25 g/L. The similar trend was found as the concentration of Na2HPO4·7H2O increased when the concentration of yeast extract changed from 7.5 g/L to 12.5 g/L.

    Figure 1. Response surface plot for the interaction between yeast extract and Na2HPO4·7H2O on the production of ethanol with a tryptone concentration of 10 g/L.

    A response surface plot that indicated the interaction between tryptone and Na2HPO4·7H2O at a yeast extract concentration of 10 g/L which influenced the ethanol production was presented in Figure 2. The ethanol concentration inceased when increasing the tryptone concentration and slightly decreased at a even higher concentration level of tryptone. The ethanol production varied in a similar way as the concentration of Na2HPO4·7H2O increased when the tryptone concentration varied from 5 g/L to 15 g/L.

    Figure 2. Response surface plot for the interaction between tryptone and Na2HPO4·7H2O on the production of ethanol with a yeast extract concentration of 10 g/L.

    Based on Equation 5, the optimal concentrations of yeast extract, tryptone, Na2HPO4·7H2O, KH2PO4 and NH4Cl for achieving the maximum ethanol production from 30% (v/v) of concentrated hot-water sugar maple wood extract hydrolyzate by E. coli FBWHR were 10.19 g/L, 14.55 g/L, 23.21 g/L, 5 g/L and 2 g/L, respectively. The predicted maximum ethanol concentration was 15.31 g/L and the actual concentration of 15.23 ± 0.21 g/L was obtained with the optimal fermentation media, which was in close agreement to the model prediction.

    3.3. Batch ethanol fermentation in 1.3 L bioreactor

    Batch fermentation was conducted in a 1.3 L bioreactor for ethanol production. Utilization of individual and total sugars, biomass growth and ethanol production by recombinant E. coli FBWHR at 30% (v/v) of concentrated hot-water wood extract hemicellulosic hydrolyzate were depicted in Figure 3.

    Figure 3. Utilization of individual and total sugars, biomass growth and ethanol production by recombinant E. coli FBWHR at 30% (v/v) of concentrated hot-water wood extract hemicellulosic hydrolyzate using optimized media in 1.3 L bioreactor.

    The total sugar concentration of 48.53 ± 0.75 g/L was detected in 30% (v/v) of concentrated hot-water wood extract hydrolyzate. Under the optimal fermentation media conditions, the maximum ethanol concentration of 22.18 ± 0.13 g/L was achieved in 40 hours with a complete consumption of all the sugars. Table 5 shows the comparison of ethanol fermentation in the optimized medium to the previous study [11] (30% (v/v) of concentrated hot-water wood extract hydrolysate, recombinant E. coli FBWHR). In the same fermentation process (pH, 7.0; Temperature, 35 °C, agitation, 200 rpm; air flow rate, 0.031 vvm), the maximum ethanol concentration of 22.18 ± 0.13 g/L was obtained with the optimized fermentation media, which was 1.22 times higher than that by using 20 g/L LB broth [11]. Meanwhile, the fermentation time reaching the maximum ethanol concentration was reduced from 46 hours to 40 hours. The ethanol yield and productivity increased by 1.20-fold and 1.41-fold, respectively, to the previous reported data for the same fermentation process. Owing to the sugar utilization for cell growth, cell maintenance and by-products production, the theoretical maximum ethanol yield of 0.51 g ethanol/g total sugar was not achieved.

    Table 5. A comparison of ethanol fermentation by recombinant E. coli FBWHR using 30% (v/v) of concentrated hot-water wood extract hydrolyzate.
    This studyWang et al. [10]
    Fermentation time, hours4046
    Ethanol concentration, g/L (n = 3)22.18 ± 0.1318.19
    Ethanol yield (Yp/s), g ethanol/g total sugar (n = 3)0.46 ± 0.010.38
    Ethanol productivity, g/(L·h) (n = 3)0.56 ± 0.030.40
     | Show Table
    DownLoad: CSV

    4. Conclusion

    Optimization of fermentation media for ethanol production from concentrated hot-water hemicellulosic wood extract hydrolyzate by recombinant E. coli FBWHR has been successfully investigated combining PB design as well as CCD response surface methodology. A maximum ethanol concentration obtained in the optimized media agreed with the result of the model prediction. Batch scale-up fermentation with optimized media further enhanced the ethanol production. The fermentation time was shortened while the ethanol yield and productivity were improved. The optimal conditions studied in this work could contribute to the development of future pilot-scale ethanol production from hemicellulosic wood hydrolyzate.

    Acknowledgements

    NMR analysis by Mr. Dave Kiemle and ICP tests by Ms. Deb Driscoll are gratefully acknowledged. The authors are also indebted to the Bioprocess Engineering Research Group and Department of Paper and Bioprocess Engineering, SUNY ESF.

    Conflict of Interest

    All authors declare no conflicts of interest in this paper.

    [1] Amidon T, Wood C, Shupe A, et al. (2008) Biorefinery: Conversion of woody biomass to chemicals, energy and materials. J Biobased Mater Bioenergy 2: 100-120. doi: 10.1166/jbmb.2008.302
    [2] Liu S (2012) Utilization of Woody Biomass: Sustainability. J Bioprocess Eng Biorefinery 1: 129-139. doi: 10.1166/jbeb.2012.1027
    [3] Wang Y, Liu S (2012) Butadiene production from ethanol. J Bioprocess Eng Biorefinery 1: 33-43. doi: 10.1166/jbeb.2012.1010
    [4] Lokhorst A, Wildenborg I (2005) Introduction to CO2 geological storage: Classification of storage options. Oil Gas Sci Technol 60: 513-515. doi: 10.2516/ogst:2005033
    [5] Balat M, Balat H (2009) Recent trends in global production and utilization of bio-ethanol fuel. Appl Energ 86: 2273-2282. doi: 10.1016/j.apenergy.2009.03.015
    [6] Qureshi N, Dien B, Liu S, et al. (2012) Genetically engineered Escherichia coli FBR5: part I. Comparison of high cell density bioreactors for enhanced ethanol production from xylose. Biotechnol Prog 2: 1167-1178.
    [7] Srirangan K, Akawi L, Moo-Young M, et al. (2012) Towards sustainable production of clean energy carriers from biomass resources. Appl Energ 100: 172-186. doi: 10.1016/j.apenergy.2012.05.012
    [8] Schenck A, Berglin N, Uusitalo J (2013) Ethanol from Nordic wood raw material by simplified alkaline soda cooking pre-treatment. Appl Energ 102: 229-240. doi: 10.1016/j.apenergy.2012.10.003
    [9] Wang Y, Liu S (2012) Pretreatment technologies for biological and chemical conversion of woody biomass. TAPPI J 11: 9-16.
    [10] Gírio F, Fonseca C, Carvalheiro F, et al. (2010) Hemicelluloses for fuel ethanol: A review. Bioresour Technol 101: 4775-4800. doi: 10.1016/j.biortech.2010.01.088
    [11] Wang Y, Liu Z, Chatsko M, et al. (2013) Ethanol fermentation by Escherichia coli FBWHR using hot-water sugar maple wood extract hydrolyzate as substrate: A batch fermentation and kinetic study. J Bioprocess Eng Biorefinery 2: 1-7. doi: 10.1166/jbeb.2013.1041
    [12] Tholudur A, Sorensen T, Zhu X, et al. (2005) Using Design of Experiments To Assess Escherichia coli Fermentation Robustness. BioProcess Int 3: 1-4.
    [13] Cockshott A, Sullivan G (2001) Improving the fermentation medium for Echinocandin B production. Part I: sequential statistical experimental design. Process Biochem 36: 647-660.
    [14] Chen P, Chiang C, Chao Y (2010) Medium optimization and production of secreted Renilla luciferase in Bacillus subtilis by fed-batch fermentation. Biochem Eng J 49: 395-400. doi: 10.1016/j.bej.2010.02.001
    [15] Plackett R, Burman J (1946) The design of optimum multifactorial experiments. Biometrika 33: 305-325. doi: 10.1093/biomet/33.4.305
    [16] Guo Y, Xu J, Zhang Y, et al. (2010) Medium optimization for ethanol production with Clostridium autoethanogenum with carbon monoxide as sole carbon source. Bioresour Technol 101: 8784-9. doi: 10.1016/j.biortech.2010.06.072
    [17] Chauhan K, Trivedi U, Patel K (2007) Statistical screening of medium components by Plackett-Burman design for lactic acid production by Lactobacillus sp. KCP01 using date juice. Bioresour Technol 98: 98-103.
    [18] Mei X, Liu R, Shen F, et al. (2009) Optimization of fermentation conditions for the production of ethanol from stalk juice of sweet sorghum by immobilized yeast using response surface methodology. Energ Fuels 23: 487-91. doi: 10.1021/ef800429u
    [19] Pereira F, Guimarães P, Teixeira J, et al. (2010) Optimization of low-cost medium for very high gravity ethanol fermentations by Saccharomyces cerevisiae using statistical experimental designs. Bioresour Technol 101: 7856-63. doi: 10.1016/j.biortech.2010.04.082
    [20] Grahovac J, Dodic J, Jokic A, et al. (2012) Optimization of ethanol production from thick juice: A response surface methodology approach. Fuel 93: 221-228. doi: 10.1016/j.fuel.2011.10.019
    [21] Wang R, Ji Y, Melikoglu M, et al. (2007) Optimization of innovative ethanol production from wheat by response surface methodology. Trans IChemE 85: 404-412. doi: 10.1205/psep07023
    [22] Yu J, Zhang X, Tan T (2009) Optimization of media conditions for the production of ethanol from sweet sorghum juice by immobilized Saccharomyces cerevisiae. Biomass Bioenerg 33: 521-526. doi: 10.1016/j.biombioe.2008.08.020
    [23] Dagnino E, Chamorro E, Romano S, et al. (2013) Optimization of the acid pretreatment of rice hulls to obtain fermentable sugars for bioethanol production. Ind Crop Prod 42: 363-368. doi: 10.1016/j.indcrop.2012.06.019
    [24] Cao W, Liu R (2013) Screening and optimization of trace elements supplement in sweet sorghum juice for ethanol production. Biomass Bioenerg 50: 45-51. doi: 10.1016/j.biombioe.2012.10.016
    [25] Liang L, Zheng Y, Shen Y (2008) Optimization of β-alanine production from β-aminopropionitrile by resting cells of Rhodococcus sp. G20 in a bubble column reactor using response surface methodology. Process Biochem 43: 758-764.
    [26] Thomas K, Ingledew W (1990) Fuel alcohol production: effects of free amino nitrogen on fermentation of very-high-gravity wheat mashes. Appl Environ Microbiol 56: 2046-2050.
    [27] Bakonyi P, Nemestóthy N, Lövitusz É, et al. (2011) Application of Plackett-Burman experimental design to optimize biohydrogen fermentation by E. coli (XL1-BLUE). Int J Hydrogen Energ 36: 13949-13954. doi: 10.1016/j.ijhydene.2011.03.062
    [28] Suárez D, Liria C, Kilikian B (1998) Effect of yeast extract on Escherichia coli growth and acetic acid production. World J Microbiol Biotechnol 14: 331-335. doi: 10.1023/A:1008800908696
    [29] He J, Zhen Q, Qiu N, et al. (2009) Medium optimization for the production of a novel bioflocculant from Halomonas sp. V3áusing response surface methodology. Bioresour Technol 100: 5922-5927.
    [30] Haider M, Pakshirajan K (2007) Screening and optimization of media constituents for enhancing lipolytic activity by a soil microorganism using statistically designed experiments. Appl Biochem Biotechnol 141: 377-390. doi: 10.1007/BF02729074
  • This article has been cited by:

    1. Derek Corbett, Ofei Mante, Biljana Bujanovic, Toward valorization of lignin: characterization and fast pyrolysis of lignin recovered from hot-water extracts of electron-beam irradiated sugar maple, 2017, 16, 0734-1415, 213, 10.32964/TJ16.4.213
  • Reader Comments
  • © 2015 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6071) PDF downloads(988) Cited by(1)

Article outline

Figures and Tables

Figures(3)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog