Research article Special Issues

Performance of cement-stabilized macadam roads based on aggregate gradation interpolation tests

  • Received: 13 January 2019 Accepted: 28 February 2019 Published: 15 March 2019
  • This study adopted the uniform interpolation method to obtain five gradation types (labeled A, B, C, D, and E, from "coarse-grained" to "fine-grained" types) based on the skeleton dense structure and cement-stabilized macadam (CSM) aggregate gradation range recommended by current specifications. The optimum water content of the CSM exhibited a linear increase with gradation, whereas the maximum dry density exhibited a variation that can be described by a quadratic curve, for which the peak maximum dry density was near the maximum dry density of the Type B gradation. In the CSM structure, the skeleton void effect of the coarse-grained aggregate, the filling effect of the fine-grained aggregate, and the cementation effect of the cement and aggregate exhibited corresponding fluctuations. The ability to resist temperature shrinkage deformation was reduced. Additionally, the optimum values of the compressive strength and compression rebound modulus of the CSM plotted near the curve of the Type D gradation.

    Citation: Zhijun Liu, Xiaobi Wei, Dongquan Wang, Liangliang Wang. Performance of cement-stabilized macadam roads based on aggregate gradation interpolation tests[J]. Mathematical Biosciences and Engineering, 2019, 16(4): 2371-2390. doi: 10.3934/mbe.2019119

    Related Papers:

  • This study adopted the uniform interpolation method to obtain five gradation types (labeled A, B, C, D, and E, from "coarse-grained" to "fine-grained" types) based on the skeleton dense structure and cement-stabilized macadam (CSM) aggregate gradation range recommended by current specifications. The optimum water content of the CSM exhibited a linear increase with gradation, whereas the maximum dry density exhibited a variation that can be described by a quadratic curve, for which the peak maximum dry density was near the maximum dry density of the Type B gradation. In the CSM structure, the skeleton void effect of the coarse-grained aggregate, the filling effect of the fine-grained aggregate, and the cementation effect of the cement and aggregate exhibited corresponding fluctuations. The ability to resist temperature shrinkage deformation was reduced. Additionally, the optimum values of the compressive strength and compression rebound modulus of the CSM plotted near the curve of the Type D gradation.


    加载中


    [1] C. Berthelot, D. Podborochynski, B. Marjerison, et al., Mechanistic characterization of cement stabilized marginal granular base materials for road construction, Can. J. Civil Eng., 37 (2010), 1613–1620.
    [2] J. P. Bilodeau, C. O. Plamondon and D. Guy, Estimation of resilient modulus of unbound granular materials used as pavement base: combined effect of grain-size distribution and aggregate source frictional properties, Mater. Struct., 49 (2016), 4363–4373.
    [3] Z. J. Chen, J. S. Xue, F. Cao, et al. Study of strong interlocked skeleton dense gradation for cement-stabilized macadam, Appl. Mech. Mater., 438–439 (2013), 644–648.
    [4] W. S. Guthrie, M. S. Shea and D. L. Eggett, Hydraulic conductivity of cement-treated soils and aggregates after freezing, Proc. Int. Conf. Cold Reg. Eng., 2012 (2012), 93–103.
    [5] Y. Wang, X. Ma and Z. L. Sun, Shrinkage performance of cement-treated macadam base materials, ICTTS, 383 (2010), 1378–1386.
    [6] W. B. Ashraf and M. A. Noor, Performance-evaluation of concrete properties for different combined aggregate gradation approaches, Proc. Eng. 14 (2011), 2627–2634.
    [7] K. A. Davis, L. S. Warr, S. E. Burns, et al., Physical and chemical behavior of four cement-treated aggregates, J. Mat. Civil Eng., 19 (2007), 891–897.
    [8] Z. J. Liu, Experimental research on the engineering characteristics of polyester fiber-reinforced cement-stabilized macadam, J. Mat. Civil Eng., 27 (2015), 04015004.
    [9] Z. J. Liu, Influence of rainfall characteristics on the infiltration moisture field of high-way subgrade, Road Mat. Pavement., 16 (2015), 635‒652.
    [10] I. D. Rey, J. Ayuso, A. Barbudo, et al., Feasibility study of cement-treated 0–8 mm recycled aggregates from construction and demolition waste as road base layer, Road Mat. Pavement., 17 (2016), 678‒692.
    [11] F. Colangelo and R. Cioffi, Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy, Composite B Eng., 115 (2017), 43–50.
    [12] F. Colangelo, R. Cioffi, B. Liguori, et al., Recycled polyolefins waste as aggregates for lightweight concrete, Composite B Eng., 106 (2016), 234–241.
    [13] V. Corinaldesi, Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates, Constr. Build. Mat., 24 (2010), 1616–1620.
    [14] W. B. Ashraf and M. A. Noor, Performance-evaluation of concrete properties for different combined aggregate gradation approaches, Proc. Eng., 14 (2011), 2627–2634.
    [15] M. R. Fatmi, B. Islam, M. Rahman, et al., Optimized aggregate gradation for Bangladesh, Appl. Mech. Mat., 71–78 (2011), 4226–4229.
    [16] L. Jin and J. L. Zheng, The analysis about how gradation impact on the performance of cement stabilized macadam base, In: 2012 International Conference on Computer Distributed Control and Intelligent Environmental monitoring, Hunan, China, 2012.
    [17] M. D. Cook, A. Ghaeezadah, and M. T. Ley, Impacts of coarse-aggregate gradation on the workability of slip-formed concrete, J. Mat. Civil Eng., 2018.
    [18] The Ministry of Communications of PRC. Technical guidelines for construction of highway roadbases (JTG/T F20-2015). China Communication Press, Beijing, China, 2015.
    [19] G. H. Hu, Study on the influence of the cement stabilized macadam's gradation to the modulus and strength, Adv. Mat. Res., 1004–1005 (2014), 1579–1584.
    [20] J. X. Liu and B. Li, Optimum design of aggregate gradation for cement stabilized macadam based on the fuzzy orthogonal method, J. Wuhan Univ. Tech., 32 (2010), 60–64.
    [21] Y. Wang, F. J. Ni and W. H. Xuan, Research on dry shrinkage performance of cement-treated base materials, Geohunan Int. Conf., 2009 (2009), 81–86.
    [22] Y. Wang, X. Sun, and Z. X. Li, Research on the reasonable strength of cement-treated macadam base, Adv. Civil Eng. Build. Mat., 2012 (2012), 621–624.
    [23] Y. Wang, W. H. Xuan and X. T. Feng, Studies on fatigue behaviors of cement stabilized macadam mixture, Geohunan Int Conf., 2011. Available from https://ascelibrary.org/doi/pdf/10.1061/47629(408)14.
    [24] Y. J. Jiang, L. W. Li, Y. S. Xu, et al. Performance comparison of cement-stabilized macadam with two skeleton close-grained gradation, Int. Conf. Concrete Pavement Des. Constr. Rehabil., 2011 (2011), 71–75.
    [25] The Ministry of Communications of PRC. Test methods of materials stabilized with inorganic binders for highway engineering (JTG E51-2009). China Communication Press, Beijing, China, 2009.
    [26] P. Zhang, Q. F. Li and H. Wei, Investigation of flexural properties of cement-stabilized macadam reinforced with polypropylene fiber, J. Mater. Civil Eng., 22 (2010), 1282–1287.
    [27] L. J. Zhao, W. Z. Jiang, J. R. Hou, et al., Influence of mixing methods on performance of compressive strength for cement stabilized macadam mixture, China J. Highway Transport., 31 (2018), 151–158.
    [28] Y. B. Yang, H. M. Chen and S. M. Wu, Study on the C80 high-strength rock chips concrete, Key Engineering Materials, Ecol. Environ. Tech. Concrete, 477 (2011), 218–223.
    [29] Y. L. Zhao, Gradation design of the aggregate skeleton in asphalt mixture, J. Test. Eval., 40 (2012), 20120142.
    [30] L. H. Li, P. Huang and D. Liu, Impact on performance of cement stabilized macadam mixtures between gyratory compaction and static compaction methods, J. Chang'an Univ. (Nat. Sci. Ed.), 36 (2016), 17–25.
    [31] D. Luo and C. F. Wu, Influence of gradation and compaction standards to performance of cement stabilized crushed stone base material, Highway, 4 (2014), 187–193.
    [32] T. Ma, X. H. Ding, D. Y. Zhang, et al., Experimental study of recycled asphalt concrete modified by high-modulus agent, Constr. Build Mat., 128 (2016), 128–135.
    [33] X. Yu and X. Wu, The influences of RAP on the performance of cement stabilized crushed stone base, IEEE, 2011 (2011), 6315–6318.
    [34] M. O. Ahmed, A. H. Waddah and K. Manish, Research on the mechanical strength of emulsified asphalt-cement stabilized macadam based on neural network algorithm, Key Eng. Mat., 753 (2017), 326–330.
    [35] A. Muntean, M. Böhm and J. Kropp, Moving carbonation fronts in concrete: A moving-sharp-interface approach, Chem. Eng. Sci., 66 (2011), 538–547.
    [36] I. S. Yoon, O. Çopuroğlu and K. B. Park, Effect of global climatic change on carbonation progress of concrete, Atmos. Environ., 41 (2007), 7274–7285.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3379) PDF downloads(796) Cited by(3)

Article outline

Figures and Tables

Figures(12)  /  Tables(7)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog