Research article Special Issues

Performance of two different constitutive models and microstructural evolution of GH4169 superalloy

  • Received: 22 November 2018 Accepted: 31 December 2018 Published: 30 January 2019
  • The hot compression tests of GH4169 superalloy were performed in the deformation temperature range of 970 to 1150 ℃ and at the strain rate range of 0.001 to 10 s−1. The flow stress is dependent on temperature and strain rate. The flow stresses were respectively predicted by Arrhenius-type and artificial neural network (ANN) models, and the predicted flow stresses were compared with the experimental data. A processing map can be obtained using the dynamic material models (DMM). A three-dimensional (3D) FEM model was established to simulate the hot compression process of GH4169 superalloy. Investigation of the microstructure of the deformed specimen was carried out using theoretical analysis, experimental research and FEM simulation. And the FEM model of compression tests were verified by experimental data.

    Citation: Xiawei Yang, Wenya Li, Yaxin Xu, Xiurong Dong, Kaiwei Hu, Yangfan Zou. Performance of two different constitutive models and microstructural evolution of GH4169 superalloy[J]. Mathematical Biosciences and Engineering, 2019, 16(2): 1034-1055. doi: 10.3934/mbe.2019049

    Related Papers:

  • The hot compression tests of GH4169 superalloy were performed in the deformation temperature range of 970 to 1150 ℃ and at the strain rate range of 0.001 to 10 s−1. The flow stress is dependent on temperature and strain rate. The flow stresses were respectively predicted by Arrhenius-type and artificial neural network (ANN) models, and the predicted flow stresses were compared with the experimental data. A processing map can be obtained using the dynamic material models (DMM). A three-dimensional (3D) FEM model was established to simulate the hot compression process of GH4169 superalloy. Investigation of the microstructure of the deformed specimen was carried out using theoretical analysis, experimental research and FEM simulation. And the FEM model of compression tests were verified by experimental data.


    加载中


    [1] P. H. Geng, G. L. Qin, J. Zhou, and Z. D. Zou, Hot deformation behavior and constitutive model of GH4169 superalloy for linear friction welding process, J. Manuf. Process., 32 (2018), 469–481.
    [2] X. W. Yang, W. Y. Li, J. L. Li, B. Xiao, T. J. Ma, Z. Huang and J. Guo, Finite element modeling of the linear friction welding of GH4169 superalloy, Mater. Design., 87 (2015), 215–230.
    [3] P. Maj, M. Koralnik, B. A. Cieslak, B. R. Baishya, S. Kut, T. Pieja, T. Mrugala and J. Mizera, Mechanical properties and microstructure of Inconel 625 cylinders used in aerospace industry subjected to flow forming with laser and standard heat treatment, Int. J. Mater. Form., (2018), https://doi.org/10.1007/s12289-018-1413-8.
    [4] X. W. Yang and W. Y. Li, Flow behavior and processing maps of a low-carbon steel during hot deformation, Metall. Mater. Trans. A, 46 (2015), 6052–6064.
    [5] M. Jabbari, R. Bulatova, A. I. Y. Tok, C. R. H. Bahl, E. Mitsoulis and J. H. Hattel, Ceramic tape casting: A review of current methods and trends with emphasis on rheological behaviour and flow analysis, Mater. Sci. Eng. B, 212 (2016), 39–61.
    [6] M. M. Gurusamy and B. C. Rao, On the performance of modified Zerilli-Armstrong constitutive model in simulating the metal-cutting process, J. Manuf. Process., 28 (2017), 253–265.
    [7] Y. L. Lin, K. Zhang, Z. B. He, X. B. Fan, Y. D. Yan and S. J. Yuan, Constitutive modeling of the high-temperature flow behavior of α-Ti alloy tube, J. Mater. Eng. Perform., 27 (2018), 2475–2483.
    [8] X. W. Yang, J. C. Zhu, Z. H. Lai, Y. R. Kong, R. D. Zhao and D. He, Application of artificial neural network to predict flow stress of as quenched A357 alloy, Mater. Sci. Tech., 28 (2012), 151–155.
    [9] S. Kumar, B. Aashranth, M. A. Davinci, D. Samantaray, U. Borah and A. K. Bhaduri, Assessing constitutive models for prediction of high-temperature flow behavior with a perspective of alloy development. J. Mater. Eng. Perform., 27 (2018), 2024–2037.
    [10] D. W. Zhao, D. X. Ren, K. M. Zhao, S. Pan and X. L. Guo, Effect of welding parameters on tensile strength of ultrasonic spot welded joints of aluminum to steel-By experimentation and artificial neural network, J. Manuf. Process., 30 (2017), 63–74.
    [11] I. Balasundar, T. Raghu and B. P. Kashyap, Processing map for a cast and homogenized near alpha titanium alloy, Int. J. Mater. Form., 8 (2015), 85–97.
    [12] S. Samal, M. R. Rahul, R. S. Kottada and G. Phanikumar, Hot deformation behaviour and processing map of Co-Cu-Fe-Ni-Ti eutectic high entropy alloy, Mater. Sci. Eng. A, 664 (2016), 227–235.
    [13] H. Rastegari, A. Kermanpurb, A. Najafizadeh, M. Somani, D. Porter, E. Ghassemali and A. Jarfors, Determination of processing maps for the warm working of vanadium microalloyed eutectoid steels, Mater. Sci. Eng. A, 658 (2016), 167–175.
    [14] D. X. Wen, Y. C. Lin, H. B. Li, X. M. Chen, J. Deng and L. T. Li, Hot deformation behavior and processing map of a typical Ni-based superalloy, Mater. Sci. Eng. A, 591 (2014), 183–192.
    [15] M. Rakhshkhorshid, Modeling the hot deformation flow curves of API X65 pipeline steel, Int. J. Adv. Manuf. Technol., 77 (2015), 203–210.
    [16] K. K. Deng, J. C. Li, F. J. Xu, K. B. Nie and W. Liang, Hot deformation behavior and processing maps of fine-grained SiCp/AZ91 composite, Mater. Des., 67 (2015), 72–81.
    [17] J. Li, F. G. Li, J. Cai, R. T. Wang, Z .W. Yuan and J. L. Ji, Comparative investigation on the modified zerilli-armstrong model and arrhenius-type model to predict the elevated-temperature flow behaviour of 7050 aluminium alloy, Comp. Mater. Sci., 71 (2013), 56–65.
    [18] Abaqus Analysis User's Manual, 2013 version 6.13.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3519) PDF downloads(762) Cited by(2)

Article outline

Figures and Tables

Figures(18)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog