Research article Topical Sections

Hydrogen generation performance of Al–20at%Ca alloy synthesized by mechanical alloying

  • Received: 29 January 2020 Accepted: 31 March 2020 Published: 07 April 2020
  • In this study, the Al–20at%Ca alloy was synthesized by mechanical alloy from the elemental powder mixture. Subsequently, the alloy particles were reacted at room temperature to determine the amount of hydrogen released. For these purposes, the powders reacted with different types of water, such as distilled water, tap water, and seawater, and also in the presence of NaCl and CaO additives. Both milled samples and reaction powders were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR, and Raman spectroscopy (RS). The XRD patterns of the powders prepared show a nanocrystalline alloy consisting of a solid-cubic solution of Al and the tetragonal intermetallic phase CaAl4. Studies of XRD and SEM, as well as direct measurements of H2, indicated that the best results of H2 generation were obtained when the alloy reacts with distilled water. Both NaCl and CaO additives improve hydrogen generation, reaching 100% efficiency in distilled water and seawater, and without induction time. Samples with a combination of NaCl and distilled water showed the best reaction times to generate the entire theoretical amount of hydrogen. The XRD and DSC–TGA standards also confirmed the presence of bayerite Al(OH)3 as a secondary reaction product.

    Citation: A. G. Hernández-Torres, J. L. López-Miranda, I. Santos-Ramos, G. Rosas. Hydrogen generation performance of Al–20at%Ca alloy synthesized by mechanical alloying[J]. AIMS Materials Science, 2020, 7(2): 144-156. doi: 10.3934/matersci.2020.2.144

    Related Papers:

  • In this study, the Al–20at%Ca alloy was synthesized by mechanical alloy from the elemental powder mixture. Subsequently, the alloy particles were reacted at room temperature to determine the amount of hydrogen released. For these purposes, the powders reacted with different types of water, such as distilled water, tap water, and seawater, and also in the presence of NaCl and CaO additives. Both milled samples and reaction powders were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR, and Raman spectroscopy (RS). The XRD patterns of the powders prepared show a nanocrystalline alloy consisting of a solid-cubic solution of Al and the tetragonal intermetallic phase CaAl4. Studies of XRD and SEM, as well as direct measurements of H2, indicated that the best results of H2 generation were obtained when the alloy reacts with distilled water. Both NaCl and CaO additives improve hydrogen generation, reaching 100% efficiency in distilled water and seawater, and without induction time. Samples with a combination of NaCl and distilled water showed the best reaction times to generate the entire theoretical amount of hydrogen. The XRD and DSC–TGA standards also confirmed the presence of bayerite Al(OH)3 as a secondary reaction product.


    加载中


    [1] Chi J, Yu H (2018) Water electrolysis based on renewable energy for hydrogen production. Chinese J Catal 39: 390-394. doi: 10.1016/S1872-2067(17)62949-8
    [2] Boran A, Erkan S, Eroglu I (2018) Hydrogen generation from solid state NaBH4 by using FeCl3 catalyst for portable proton exchange membrane fuel cell applications. Int J Hydrogen Energ 44: 18915-18926.
    [3] Zhang F, Zhao P, Niu M, et al. (2016) The survey of key technologies in hydrogen energy storage. Int J Hydrogen Energ 41: 14535-14552. doi: 10.1016/j.ijhydene.2016.05.293
    [4] Ancona MA, Antonioni G, Branchini L, et al. (2016) Renewable energy storage system based on a power-to-gas conversion process. Energ Procedia 101: 854-861. doi: 10.1016/j.egypro.2016.11.108
    [5] Kotowicz J, Bartela Ł, Węcel D, et al. (2017) Hydrogen generator characteristics for storage of renewably-generated energy. Energy 118: 156-171. doi: 10.1016/j.energy.2016.11.148
    [6] Czech E, Troczynski T (2010) Hydrogen generation through massive corrosion of deformed aluminum in water. International journal of hydrogen energy. Int J Hydrogen Energ 35: 1029-1037. doi: 10.1016/j.ijhydene.2009.11.085
    [7] Soler L, Macanás J, Muñoz M, et al. (2007) Synergistic hydrogen generation from aluminum, aluminum alloys and sodium borohydride in aqueous solutions. Int J Hydrogen Energ 32: 4702-4710. doi: 10.1016/j.ijhydene.2007.06.019
    [8] Mahmoodi K, Alinejad B (2010) Enhancement of hydrogen generation rate in reaction of aluminum with water. Int J Hydrogen Energ 35: 5227-5232. doi: 10.1016/j.ijhydene.2010.03.016
    [9] Flores-Chan JE, Bedolla-Jacuinde A, Patiño-Carachure C, et al. (2018) Corrosion study of Al-Fe (20 wt-%) alloy in artificial sea water with NaOH additions. Can Metall Quart 57: 201-209. doi: 10.1080/00084433.2017.1410942
    [10] Hurtubise DW, Klosterman DA, Morgan AB (2018) Development and demonstration of a deployable apparatus for generating hydrogen from the hydrolysis of aluminum via sodium hydroxide. Int J Hydrogen Energ 43: 6777-6788. doi: 10.1016/j.ijhydene.2018.02.087
    [11] Porciúncula CB, Marcilio NR, Tessaro IC, et al. (2012) Production of hydrogen in the reaction between aluminum and water in the presence of NaOH and KOH. Braz J Chem Eng 29: 337-348. doi: 10.1590/S0104-66322012000200014
    [12] Al Bacha S, Zakhour M, Nakhl M, et al. (2020) Effect of ball milling in presence of additives (Graphite, AlCl3, MgCl2 and NaCl) on the hydrolysis performances of Mg17Al12. Int J Hydrogen Energ 45: 6102-6109. doi: 10.1016/j.ijhydene.2019.12.162
    [13] Razavi-Tousi SS, Szpunar JA (2016) Effect of addition of water-soluble salts on the hydrogen generation of aluminum in reaction with hot water. J Alloy Compd 679: 364-374. doi: 10.1016/j.jallcom.2016.04.038
    [14] Li F, Zhu B, Sun Y, et al. (2017) Hydrogen generation by means of the combustion of aluminum powder/sodium borohydride in steam. Int J Hydrogen Energ 42: 3804-3812. doi: 10.1016/j.ijhydene.2016.07.015
    [15] Xiao F, Yang R, Gao W, et al. (2020) Effect of carbon materials and bismuth particle size on hydrogen generation using aluminum-based composites. J Alloy Compd 817: 152800. doi: 10.1016/j.jallcom.2019.152800
    [16] Guan X, Zhou Z, Luo P, et al. (2019) Hydrogen generation from the reaction of Al-based composites activated by low-melting-point metals/oxides/salts with water. Energy 188: 116107. doi: 10.1016/j.energy.2019.116107
    [17] Qiao D, Lu Y, Tang Z, et al. (2019) The superior hydrogen-generation performance of multi-component Al alloys by the hydrolysis reaction. Int J Hydrogen Energ 44: 3527-3537. doi: 10.1016/j.ijhydene.2018.12.124
    [18] Yang B, Zhu J, Jiang T, et al. (2017) Effect of heat treatment on AlMgGaInSn alloy for hydrogen generation through hydrolysis reaction. Int J Hydrogen Energ 42: 24393-24403. doi: 10.1016/j.ijhydene.2017.07.091
    [19] Du BD, He TT, Liu GL, et al. (2018) Al-water reactivity of AlMgGaInSn alloys used for hydraulic fracturing tools. Int J Hydrogen Energ 43: 7201-7215. doi: 10.1016/j.ijhydene.2018.02.090
    [20] Liang J, Gao LJ, Miao NN, et al. (2016) Hydrogen generation by reaction of Al-M (M = Fe, Co, Ni) with water. Energy 113: 282-287.
    [21] López-Miranda JL, Rosas G (2016) Hydrogen generation by aluminum hydrolysis using the Fe2Al5 intermetallic compound. Int J Hydrogen Energ 41: 4054-4059. doi: 10.1016/j.ijhydene.2016.01.012
    [22] Brisse A, Schefold J, Zahid M (2008) High temperature water electrolysis in solid oxide cells. Int J Hydrogen Energ 33: 5375-5382. doi: 10.1016/j.ijhydene.2008.07.120
    [23] Ilyukhina AV, Kravchenko OV, Bulychev BM (2017) Studies on microstructure of activated aluminum and its hydrogen generation properties in aluminum/water reaction. J Alloy Compd 690: 321-329. doi: 10.1016/j.jallcom.2016.08.151
    [24] Acar C, Dincer I (2019) Review and evaluation of hydrogen production options for better environment. J Clean Prod 218: 835-849. doi: 10.1016/j.jclepro.2019.02.046
    [25] Ho CY, Huang CH (2016) Enhancement of hydrogen generation using waste aluminum cans hydrolysis in low alkaline de-ionized water. Int J Hydrogen Energ 41: 3741-3747. doi: 10.1016/j.ijhydene.2015.11.083
    [26] Du Preez, SP, Bessarabov DG (2018) Hydrogen generation by the hydrolysis of mechanochemically activated aluminum-tin-indium composites in pure water. Int J Hydrogen Energ 43: 21398-21413.
    [27] Du Preez SP, Bessarabov DG. (2019) The effects of bismuth and tin on the mechanochemical processing of aluminum-based composites for hydrogen generation purposes. Int J Hydrogen Energ 44: 21896-21912. doi: 10.1016/j.ijhydene.2019.06.154
    [28] Irankhah A, Fattahi SMS, Salem M (2018) Hydrogen generation using activated aluminum/water reaction. Int J Hydrogen Energ 43: 15739-15748. doi: 10.1016/j.ijhydene.2018.07.014
    [29] Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46: 1-184. doi: 10.1016/S0079-6425(99)00010-9
    [30] Saceleanu F, Vuong TV, Master ER, et al. (2019) Tunable kinetics of nanoaluminum and microaluminum powders reacting with water to produce hydrogen. Int J Energ Res 43: 7384-7396.
    [31] Salazar M, Pérez R, Rosas G (2005) Environmental embrittlement characteristics of the AlFe and AlCuFe intermetallic systems. J New Mater Electrochem Syst 8: 97-100.
    [32] Krasnowski M, Gierlotka S, Ciołek S, et al. (2019) Nanocrystalline NiAl intermetallic alloy with high hardness produced by mechanical alloying and hot-pressing consolidation. Adv Powder Technol 30: 1312-1318. doi: 10.1016/j.apt.2019.04.006
    [33] Naghiha H, Movahedi B, Asadabad MA, et al. (2017) Amorphization and nanocrystalline Nb3Al intermetallic formation during mechanical alloying and subsequent annealing. Adv Powder Technol 28: 340-345. doi: 10.1016/j.apt.2016.09.022
    [34] Antipina SA, Zmanovskii SV, Gromov AA, et al. (2017) Air and water oxidation of aluminum flake particles. Powder Technol 307: 184-189. doi: 10.1016/j.powtec.2016.12.009
    [35] Wang HW, Chung HW, Teng HT, et al. (2011) Generation of hydrogen from aluminum and water-effect of metal oxide nanocrystals and water quality. Int J Hydrogen Energ 36: 15136-15144. doi: 10.1016/j.ijhydene.2011.08.077
    [36] Gai WZ, Deng ZY (2014) Effect of trace species in water on the reaction of Al with water. Journal Power Sources 245: 721-729. doi: 10.1016/j.jpowsour.2013.07.042
    [37] Ma GL, Dai HB, Zhuang DW, et al. (2012) Controlled hydrogen generation by reaction of aluminum/sodium hydroxide/sodium stannate solid mixture with water. Int J Hydrogen Energ 37: 5811-5816. doi: 10.1016/j.ijhydene.2011.12.157
    [38] Xu S, Zhao X, Liu J (2018) Liquid metal activated aluminum-water reaction for direct hydrogen generation at room temperature. Renew Sust Energ Rev 92: 17-37. doi: 10.1016/j.rser.2018.04.052
    [39] Nie H, Schoenitz M, Dreizin EL (2012) Calorimetric investigation of the aluminum-water reaction. Int J Hydrogen Energ 37: 11035-11045. doi: 10.1016/j.ijhydene.2012.05.012
    [40] Belete TT, Van De Sanden MCM, Gleeson MA (2019) Effects of transition metal dopants on the calcination of CaCO3 under Ar, H2O and H2. J CO2 Util 31: 152-166. doi: 10.1016/j.jcou.2019.03.006
    [41] Liu H, Yang F, Yang B, et al. (2018) Rapid hydrogen generation through aluminum-water reaction in alkali solution. Catal Today 318: 52-58. doi: 10.1016/j.cattod.2018.03.030
    [42] Soler L, Candela AM, Macanás J, et al. (2009) Hydrogen generation by aluminum corrosion in seawater promoted by suspensions of aluminum hydroxide. Int J Hydrogen Energ 34: 8511-8518. doi: 10.1016/j.ijhydene.2009.08.008
    [43] Xiao F, Guo Y, Li J, et al. (2018) Hydrogen generation from hydrolysis of activated aluminum composites in tap water. Energy 157: 608-614. doi: 10.1016/j.energy.2018.05.201
    [44] Wang CC, Chou YC, Yen CY (2012) Hydrogen Generation from aluminum and aluminum alloys powder. Procedia Eng 36: 105-113. doi: 10.1016/j.proeng.2012.03.017
  • Reader Comments
  • © 2020 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(2735) PDF downloads(362) Cited by(1)

Article outline

Figures and Tables

Figures(9)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog