Mini review Special Issues

Elastocaloric cooling: roadmap towards successful implementation in the built environment

  • Received: 30 September 2019 Accepted: 20 November 2019 Published: 25 November 2019
  • In the pursuit of ever more efficient built environments, able to resiliently respond to the many implications of climate change, near room-temperature caloric cooling could be a game changer from multiple standpoints. In this paper, perspectives and challenges of successful implementation of elastocaloric devices in the built environment are explored by contrasting the current readiness level with the envisaged potentiality. Material-level and device-level criticalities are identified and potential solutions are discussed. The roadmap towards an informed and efficient use of this environmentally friendly technology is eventually proposed aiming at an increase of building’s energy efficiency, but also at counteracting the urban heat island effect.

    Citation: Giulia Ulpiani, Gianluca Ranzi, Florian Bruederlin, Riccardo Paolini, Francesco Fiorito, Shamila Haddad, Manfred Kohl, Mat Santamouris. Elastocaloric cooling: roadmap towards successful implementation in the built environment[J]. AIMS Materials Science, 2019, 6(6): 1135-1152. doi: 10.3934/matersci.2019.6.1135

    Related Papers:

  • In the pursuit of ever more efficient built environments, able to resiliently respond to the many implications of climate change, near room-temperature caloric cooling could be a game changer from multiple standpoints. In this paper, perspectives and challenges of successful implementation of elastocaloric devices in the built environment are explored by contrasting the current readiness level with the envisaged potentiality. Material-level and device-level criticalities are identified and potential solutions are discussed. The roadmap towards an informed and efficient use of this environmentally friendly technology is eventually proposed aiming at an increase of building’s energy efficiency, but also at counteracting the urban heat island effect.


    加载中


    [1] Pachauri RK, Meyer LA (2014) Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Switzerland: IPCC (International Panel on Climate Change).
    [2] Zaelke D, Borgford-Parnell N (2015) The importance of phasing down hydrofluorocarbons and other short-lived climate pollutants. J Environ Stud Sci 5: 169-175. doi: 10.1007/s13412-014-0215-7
    [3] Ramanathan V, Xu Y (2010) The Copenhagen accord for limiting global warming: criteria, constraints, and available avenues. PNAS 107: 8055-8062. doi: 10.1073/pnas.1002293107
    [4] UNEP (United Nations Environment Programme), Near-term climate protection and clean air benefits: actions for controlling short-lived climate forcers, 2011. Avaliable from: https://www.ccacoalition.org/en/file/914/download?token=dkVP64Ls.
    [5] Ullstein B (2011) Integrated Assessment of Black Carbon and Tropospheric Ozone, UNEP (United Nations Environment Programme), WMO (World Meteorological Organization).
    [6] Cross J-M, Pierson R (2013) Short-Lived Climate Pollutants: why are They Important? Washington: EESI (Environment and Energy Study Institute), 202: 628-1400.
    [7] Myhre G, Shindell D, Pongratz J (2014) Anthropogenic and natural radiative forcing, in: Stocker TF, Qin D, Plattner G-M, et al., Climate Change 2013 Physical Science Basis. Contribution of Working Group I to Fifth Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge and New York: Cambridge University Press, 659-740.
    [8] Santamouris M (2016) Cooling the buildings-past, present and future. Energ Buildings 128: 617-638. doi: 10.1016/j.enbuild.2016.07.034
    [9] Austin BT, Sumathy K (2011) Parametric study on the performance of a direct-expansion geothermal heat pump using carbon dioxide. Appl Therm Eng 31: 3774-3782. doi: 10.1016/j.applthermaleng.2011.07.007
    [10] Bellomare F, Minetto S (2015) Experimental analysis of hydrocarbons as drop-in replacement in household heat pump tumble dryers. Energy Procedia 81: 1212-1221. doi: 10.1016/j.egypro.2015.12.153
    [11] Wang K, Abdelaziz O, Kisari P, et al. (2011) State-of-the-art review on crystallization control technologies for water/LiBr absorption heat pumps. Int J Refrig 34: 1325-1337. doi: 10.1016/j.ijrefrig.2011.04.006
    [12] Goetzler W, Shandross R, Young J, et al. (2017) Energy savings potential and RD&D opportunities for commercial auilding HVAC systems. DOE/EE-1703, Burlington: Navigant Consulting.
    [13] Takeuchi I, Sandeman K (2015) Solid-state cooling with caloric materials. Phys Today 68: 48.
    [14] Cui J, Wu Y, Muehlbauer J, et al. (2012) Demonstration of high efficiency elastocaloric cooling with large Δt using NiTi wires. Appl Phys Lett 101: 2-6.
    [15] Wieczorek A, Frenzel J, Schmidt M, et al. (2017) Optimizing Ni-Ti-based shape memory alloys for ferroic cooling. Funct Mater Lett 10: 1-8.
    [16] Li Y, Zhao D, Liu J (2016) Giant and reversible room-temperature elastocaloric effect in a single-crystalline Ni-Fe-Ga magnetic shape memory alloy. Sci Rep 6: 1-11. doi: 10.1038/s41598-016-0001-8
    [17] Frenzel J, Eggeler G, Quandt E, et al. (2018) High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices. MRS Bull 43: 280-284. doi: 10.1557/mrs.2018.67
    [18] Ossmer H (2016) Elastocaloric microcooling [PhD's thesis]. Karlsruher Institute of Technology, Germany, 1: 16159.
    [19] Qian S, Geng Y, Wang Y, et al. (2016) A review of elastocaloric cooling: Materials, cycles and system integrations. Int J Refrig 64: 1-19. doi: 10.1016/j.ijrefrig.2015.12.001
    [20] Bartekova E (2014) An introduction to the economics of rare earths, UNU-MERIT Work Paper Series, Maastricht: UNU-MERIT, #2014-043.
    [21] Vakiloroaya V, Samali B, Pishghadam K (2014) A comparative study on the effect of different strategies for energy saving of air-cooled vapor compression air conditioning systems. Energ Buildings 74: 163-172. doi: 10.1016/j.enbuild.2014.01.042
    [22] Shah N, Khanna N, Karali N, et al. (2017) Opportunities for simultaneous efficiency improvement and refrigerant transition in air conditioning. American: Lawrence Berkeley National Laboratory 18.
    [23] Santamouris M, Sfakianaki A, Pavlou K (2010) On the efficiency of night ventilation techniques applied to residential buildings. Energ Buildings 42: 1309-1313. doi: 10.1016/j.enbuild.2010.02.024
    [24] Engelbrecht K (2019) Future prospects for elastocaloric devices. J Phys-Energ 1: 021001. doi: 10.1088/2515-7655/ab1573
    [25] Rizwan AM, Dennis LYC, Liu C (2008) A review on the generation, determination and mitigation of Urban Heat Island. J Environ Sci 20: 120-128. doi: 10.1016/S1001-0742(08)60019-4
    [26] Ossmer H, Wendler F, Gueltig M, et al. (2016) Energy-efficient miniature-scale heat pumping based on shape memory alloys. Smart Mater Struct 25: 085037. doi: 10.1088/0964-1726/25/8/085037
    [27] Shaw JA, Kyriakides S (1995) Thermomechanical aspects of NiTi. J Mech Phys Solids 43: 1243-1281. doi: 10.1016/0022-5096(95)00024-D
    [28] Schmidt M, Schütze A, Seelecke S (2016) Elastocaloric cooling processes: The influence of material strain and strain rate on efficiency and temperature span. APL Mater 4: 064107. doi: 10.1063/1.4953433
    [29] Wendler F, Ossmer H, Chluba C, et al. (2017) Mesoscale simulation of elastocaloric cooling in SMA films. Acta Mater 136: 105-117. doi: 10.1016/j.actamat.2017.06.044
    [30] Zarkevich NA, Johnson DD, Pecharsky VK (2018) High-throughput search for caloric materials: The CaloriCool approach. J Phys D Appl Phys 51: 024002. doi: 10.1088/1361-6463/aa9bd0
    [31] Bruederlin F, Ossmer H, Wendler F, et al. (2017) SMA foil-based elastocaloric cooling: from material behavior to device engineering. J Phys D Appl Phys 50: 424003. doi: 10.1088/1361-6463/aa87a2
    [32] Kirsch SM, Welsch F, Michaelis N, et al. (2018) NiTi-Based elastocaloric cooling on the macroscale: from basic concepts to realization. Energy Technol 6: 1567-1587. doi: 10.1002/ente.201800152
    [33] Otubo J, Rigo OD, Coelho AA, et al. (2008) The influence of carbon and oxygen content on the martensitic transformation temperatures and enthalpies of NiTi shape memory alloy. Mater Sci Eng A-Struct 481: 639-642.
    [34] Brown JS, Domanski PA (2014) Review of alternative cooling technologies. Appl Therm Eng 64: 252-262. doi: 10.1016/j.applthermaleng.2013.12.014
    [35] Otsuka K, Wayman CM (1998) Shape Memory Materials, Cambridge: Cambridge university press.
    [36] Bruederlin F, Bumke L, Quand E, et al. (2019) Cascaded Sma-film based elastocaloric cooling. 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII 1467-1470.
    [37] Frenzel J, George EP, Dlouhy A, et al. (2010) Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Mater 58: 3444-3458. doi: 10.1016/j.actamat.2010.02.019
    [38] Cui J, Chu YS, Famodu OO, et al. (2006) Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width. Nat Mater 5: 286-290. doi: 10.1038/nmat1593
    [39] Gu H, Bumke L, Chluba C, et al. (2018) Phase engineering and supercompatibility of shape memory alloys. Mater Today 21: 265-277. doi: 10.1016/j.mattod.2017.10.002
    [40] Chen X, Srivastava V, Dabade V, et al. (2013) Study of the cofactor conditions: Conditions of supercompatibility between phases. J Mech Phys Solids 61: 2566-2587. doi: 10.1016/j.jmps.2013.08.004
    [41] Chen H, Xiao F, Liang X, et al. (2019) Giant elastocaloric effect with wide temperature window in an Al-doped nanocrystalline Ti-Ni-Cu shape memory alloy. Acta Mater 177: 169-177. doi: 10.1016/j.actamat.2019.07.033
    [42] Chen H, Xiao F, Liang X, et al. (2018) Stable and large superelasticity and elastocaloric effect in nanocrystalline Ti-44Ni-5Cu-1Al (at%) alloy. Acta Mater 158: 330-339. doi: 10.1016/j.actamat.2018.08.003
    [43] Robertson SW, Pelton AR, Ritchie RO (2012) Mechanical fatigue and fracture of Nitinol. Int Mater Rev 57: 1-36. doi: 10.1179/1743280411Y.0000000009
    [44] Tušek J, Žerovnik A, Čebron M, et al. (2018) Elastocaloric effect vs fatigue life: exploring the durability limits of Ni-Ti plates under pre-strain conditions for elastocaloric cooling. Acta Mater 150: 295-307. doi: 10.1016/j.actamat.2018.03.032
    [45] Engelbrecht K, Tušek J, Sanna S, et al. (2016) Effects of surface finish and mechanical training on Ni-Ti sheets for elastocaloric cooling. APL Mater 4: 064110. doi: 10.1063/1.4955131
    [46] Chluba C, Ossmer H, Zamponi C, et al. (2016) Ultra-low fatigue quaternary TiNi-based films for elastocaloric cooling. Shape Mem Superelasticity 2: 95-103. doi: 10.1007/s40830-016-0054-3
    [47] Bechtold C, Chluba C, Lima De Miranda R, et al. (2012) High cyclic stability of the elastocaloric effect in sputtered TiNiCu shape memory films. Appl Phys Lett 101: 091903. doi: 10.1063/1.4748307
    [48] Schmidt M, Kirsch SM, Seelecke S, et al. (2016) Elastocaloric cooling: from fundamental thermodynamics to solid state air conditioning. Sci Technol Built Environ 22: 475-488. doi: 10.1080/23744731.2016.1186423
    [49] Greco A, Aprea C, Maiorino A, et al. (2019) A review of the state of the art of solid-state caloric cooling processes at room-temperature before 2019. Int J Refrig 106: 66-88. doi: 10.1016/j.ijrefrig.2019.06.034
    [50] Qian S, Geng Y, Wang Y, et al. (2016) A review of elastocaloric cooling: materials, cycles and system integrations. Int J Refrig 64: 1-19. doi: 10.1016/j.ijrefrig.2015.12.001
    [51] Hou H, Cui J, Qian S, et al. (2018) Overcoming fatigue through compression for advanced elastocaloric cooling. MRS Bull 43: 285-290. doi: 10.1557/mrs.2018.70
    [52] Reedlunn B, Churchill CB, Nelson EE, et al. (2014) Tension, compression, and bending of superelastic shape memory alloy tubes. J Mech Phys Solids 63: 506-537. doi: 10.1016/j.jmps.2012.12.012
    [53] Adler PH, Allen J, Lessar J, et al. (2007) Martensite transformations and fatigue behavior of nitinol. STP1481, ASTM International.
    [54] Sharar DJ, Radice J, Warzoha R, et al. (2018) First demonstration of a bending-mode elastocaloric cooling "loop". 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems 218-226.
    [55] Ossmer H, Chluba C, Kauffmann-Weiss S, et al. (2016) TiNi-based films for elastocaloric microcooling-fatigue life and device performance. APL Mater 4: 064102. doi: 10.1063/1.4948271
    [56] Ullrich SSJ, Schmidt M, Schütze A, et al. (2014) Experimental investigation and numerical simulation of the mechanical and thermal behavior of a superelastic shape memory alloy beam during bending, Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.
    [57] Najib M (2016) Toward analysis of a cooling device using shape memory alloys [PhD's thesis]. University of Toledo, American.
    [58] Cui J, Wu Y, MuehlbauerJ, et al. (2012) Demonstration of high efficiency elastocaloric cooling with large Δt using NiTi wires. Appl Phys Lett 101: 2-6.
    [59] Ossmer H, Miyazaki S, Kohl M (2015) Elastocaloric heat pumping using a shape memory alloy foil device. 2015 Transducers-2015 18th Int Conf Solid-State Sensors, Actuators Microsystems, 726-729.
    [60] Tušek J, Engelbrecht K, Eriksen D, et al. (2016) A regenerative elastocaloric heat pump. Nat Energy 1: 16134. doi: 10.1038/nenergy.2016.134
    [61] Tušek J, Engelbrecht K, Millán-Solsona R, et al. (2015) The elastocaloric effect: A way to cool efficiently. Adv Energy Mater 5: 1-5.
    [62] Engelbrecht K, Tušek J, Eriksen D, et al. (2017) A regenerative elastocaloric device: experimental results. J Phys D Appl Phys 50: 424006. doi: 10.1088/1361-6463/aa8656
    [63] Bruederlin F, Bumke L, Chluba C, et al. (2018) Elasto caloric cooling on the miniature scale: A review on materials and device engineering. Energy Technol 6: 1588-1604. doi: 10.1002/ente.201800137
    [64] Bartholome K, Fitger A, Mahlke A, et al. (2018) An elastocaloric cooling system based on latent heat transfer. Symposium TP01: Caloric Materials for Highly Efficient Cooling Applications. Avaliable from: https://www.mrs.org/docs/default-source/meetings-events/fall-meetings/2018/symposium-session-pdfs/symposium-tp01.pdf?sfvrsn=8c6ebb10_3.
    [65] Bartholome K (2017) Efficient elastocaloric heat pumps. Fraunhofer Reports AR 2016-17, 52-53. Avaliable from: https://www.ipm.fraunhofer.de/content/dam/ipm/en/PDFs/reports/ar-2016-17articles/AR-52-53-elastocaloric-heat-pumps.pdf.
    [66] Prasher R, Chiu CP (2016) Thermal interface materials. Mater Adv Packag 10: 511-535.
    [67] Prasher R (2006) Thermal interface materials: historical perspective, status, and future directions. Proc IEEE 94: 1571-1586. doi: 10.1109/JPROC.2006.879796
    [68] Bahrami M, Yovanovich MM, Culham JR (2005) Thermal contact resistance at low contact pressure: effect of elastic deformation. Int J Heat Mass Tran 48: 3284-3293. doi: 10.1016/j.ijheatmasstransfer.2005.02.033
    [69] Gotsmann B, Lantz MA (2013) Quantized thermal transport across contacts of rough surfaces. Nat Mater 12: 59-65. doi: 10.1038/nmat3460
    [70] Ossmer H, Chluba C, Gueltig M, et al. (2015) Local evolution of the elastocaloric effect in TiNi-based films. Shape Mem Superelasticity 1: 142-152. doi: 10.1007/s40830-015-0014-3
    [71] Schmidt M, Schütze A, Seelecke S (2015) Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processes. Int J Refrig 54: 88-97. doi: 10.1016/j.ijrefrig.2015.03.001
    [72] Schmidt M, Ullrich J, Wieczorek A, et al. Experimental methods for investigation of shape memory based elastocaloric cooling processes and model validation. J Vis Exp 2016: 1-19.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3647) PDF downloads(634) Cited by(10)

Article outline

Figures and Tables

Figures(5)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog