Research article Topical Sections

Microstructure and mechanical properties of newly developed SiC-C/C composites under atmospheric conditions

  • Received: 01 February 2018 Accepted: 14 May 2018 Published: 21 May 2018
  • The purpose of this study is to investigate the relationship between its microstructure and bending strength of SiC-C/C (carbon-carbon) composites. By using the phenolic resin and carbon fiber bundle, the carbon fiber reinforced plastics (CFRP) precursor was prepared by employing filament winding technique. To modify the phenolic resin, the micro-sized glass fiber was added. The CFRP precursor was charred at high temperature at Argon atmosphere to obtain SiC-C/C composites. The matrix of composites was densified by resin impregnation done by cold isostatic pressing (CIP) method. The detail observation of matrix after charred revealed that when precursor resin was modified with glass fiber, the direction of thermal crack at matrix showed complex manner, while thermal crack at un-modified matrix only appeared along fiber direction. Because of the presence of complex thermal crack, the matrix of SiC-C/C composite showed high porosity at un-densified condition and effectively densified by CIP to promoting resin flow toward thermal crack. The bending and compression test results showed that bending strength and inter-laminar shear strength of SiC-C/C composites was increased by densification. Moreover, the fractured surface observations suggested that the presence of synthesized SiC nano-whisker at inter-laminar enhances the apparent shear strength due to mechanical bridging between laminar.

    Citation: Kiyotaka Obunai, Daisuke Mikami, Tadao Fukuta, Koichi Ozaki. Microstructure and mechanical properties of newly developed SiC-C/C composites under atmospheric conditions[J]. AIMS Materials Science, 2018, 5(3): 494-507. doi: 10.3934/matersci.2018.3.494

    Related Papers:

  • The purpose of this study is to investigate the relationship between its microstructure and bending strength of SiC-C/C (carbon-carbon) composites. By using the phenolic resin and carbon fiber bundle, the carbon fiber reinforced plastics (CFRP) precursor was prepared by employing filament winding technique. To modify the phenolic resin, the micro-sized glass fiber was added. The CFRP precursor was charred at high temperature at Argon atmosphere to obtain SiC-C/C composites. The matrix of composites was densified by resin impregnation done by cold isostatic pressing (CIP) method. The detail observation of matrix after charred revealed that when precursor resin was modified with glass fiber, the direction of thermal crack at matrix showed complex manner, while thermal crack at un-modified matrix only appeared along fiber direction. Because of the presence of complex thermal crack, the matrix of SiC-C/C composite showed high porosity at un-densified condition and effectively densified by CIP to promoting resin flow toward thermal crack. The bending and compression test results showed that bending strength and inter-laminar shear strength of SiC-C/C composites was increased by densification. Moreover, the fractured surface observations suggested that the presence of synthesized SiC nano-whisker at inter-laminar enhances the apparent shear strength due to mechanical bridging between laminar.


    加载中
    [1] Bussiba A, Kupiec M, Piat R, et al. (2008) Fracture characterization of C/C composites under various stress modes by monitoring both mechanical and acoustic responses. Carbon 4: 618–630.
    [2] Buchgraber W (2003) Carbon/Carbon composite friction discs for aerospace. Materialwiss Werkst 34: 317–321. doi: 10.1002/mawe.200390067
    [3] Don J, Wang Z (2009) Effect of anti-oxidant migration on friction and wear of C/C air craft brakes. Appl Compos Mater 16: 73–81. doi: 10.1007/s10443-008-9075-1
    [4] Ishizawa S, Machida T (1997) Effect of Oxidation Degradation on Elevated-Temperature Strength of C/C Composite. T Jpn Soc Mech Eng A 63: 845–850 [in Japanese]. doi: 10.1299/kikaia.63.845
    [5] Bacos MP (1993) Carbon-carbon composites oxidation behavior and coatings protection. J Phys IV France 03: C7-1895-C7-1903.
    [6] Kim SY, Han IS, Woo SK, et al. (2013) Wear-mechanical properties of filler-added liquid silicon infiltration C/C-SiC composites. Mater Design 44: 107–113. doi: 10.1016/j.matdes.2012.07.064
    [7] Zhao K, Li K, Wang Y (2013) Rapid densification of C-SiC composite by incorporating SiC nanowires. Compos Part B-Eng 45: 1583–1586. doi: 10.1016/j.compositesb.2012.08.018
    [8] Vignoles GL, Goyhénèche JM, Sébastian P, et al. (2006) The film-boiling densification process for C/C composite fabrication: From local scale to overall optimization. Chem Eng Sci 61: 5636–5653. doi: 10.1016/j.ces.2006.04.025
    [9] Stadler Z, Krnel K, Kosmac T (2007) Friction behavior of sintered metallic brake pads on a C/C-SiC composite brake disc. J Eur Ceram Soc 27: 1411–1417. doi: 10.1016/j.jeurceramsoc.2006.04.032
    [10] Zhang J, Xu Y, Zhang L, et al. (2007) Effect of braking speed on friction and wear behaviors of C/C-SiC composites. Int J Appl Ceram Tec 4: 463–469. doi: 10.1111/j.1744-7402.2007.02155.x
    [11] Zhou X, Zhu D, Xie Q, et al. (2012) Friction and wear properties of C/C-SiC braking composites. Ceram Int 38: 2467–2473. doi: 10.1016/j.ceramint.2011.11.015
    [12] Kawai C, Igarashi T (1991) Oxidation resistant coating of TiC-SiC system on C/C composite by chemical vapor deposition. J Ceram Soc Jpn 99: 390–394 [in Japanese]. doi: 10.2109/jcersj.99.390
    [13] Utunomiya Y, Obunai K, Fukuta T, et al. (2016) Mechanical Characteristics of C/C Composites Modified with Micro-Sized Glass Fibers. Adv Exp Mech 1: 126–130.
    [14] Obunai K, Mikami D, Fukuta T, et al. (2016) Mechanism of SiC synthesisation at C/C composites modified with glass fiber during char condition. JSMS Composites Young Research Symposium [in Japanese].
    [15] Kimura M, Obunai K, Okubo K, et al. (2014) Moderation of Dependence of Frictional Coefficient of C/C Composite on Temperature due to Addition of Glass Fibers into Carbon Precursor of Phenolic Resin. Proceedings of ACCM9, ACCM9-C-007.
    [16] Li M, Matsuyama R, Sakai M (1999) Interlaminar shear strength of C/C composites: the dependence on test methods. Carbon 37: 1749–1757. doi: 10.1016/S0008-6223(99)00049-4
    [17] Thielicke B, Soltesz U, Krenkel W, et al. (1999) Creep of a C/C-SiC composite under interlaminar shear loading at high temperatures. Proceedings of ICCM12.
    [18] Nakamura C, Sakai Y, Kishi T (2012) Study on the effects of chemical and physical property of concrete on the behavior of water. Cement Sci Concrete Technol 66: 444–451 [in Japanese]. doi: 10.14250/cement.66.444
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3574) PDF downloads(913) Cited by(0)

Article outline

Figures and Tables

Figures(13)  /  Tables(2)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog