Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Modified regression and ANN model for load carrying capacity of corroded reinforced concrete beam

Department of Civil Engineering, SHUATS (Formerly AAI-DU), Allahabad-211007, U.P, India

Topical Section: Corrosion

There have been many extensive studies on the prediction of the residual strength of corroded reinforced concrete beams from experimental and theoretical perspectives in the past. This article corroborated the findings of Azad et al. (2010) pertaining to the residual strength and safety of the corroded beams and an insight to develop an improved regression model to obtain more practical outcomes. The proposed model has further been verified with the past research data to obtain a validation error to its minimum count. The study is also followed by the use of soft computing technique like Artificial Neural Networks (ANN) to establish a method with substantial improvement in the prediction results of residual strength. One ANN model is proposed to predict the residual capacity of corroded reinforced concrete beams using the same data from Azad et al. (2010). The effects of fixed data stratification on the performance of the models have been studied. The results of the ANN model were found to be in good agreement with experimental values. When compared with the results of Azad et al. (2010), the ANN model with fixed data stratification gave a better prediction for residual strength with reference to correlation coefficient and error reduction. Hence, the reliability of ANN model is assured with the prediction work followed in this study.
  Figure/Table
  Supplementary
  Article Metrics

References

1. Kumar V, Singh R, Quraishi MA (2013) A study on corrosion of reinforcement in concrete and effect of inhibitor on service life of RCC. J Mater Environ Sci 4: 726–731.

2. Gu XL, Zhang WP, Shang DF, et al. (2010) Flexural Behavior of corroded Reinforced Concrete Beams, In: Song GB, Malla RB, Earth and Space 2010: Engineering, Science, Construction and Operations in Challenging Environments, 3545–3552.

3. Torres-Acosta AA, Navarro-Gutierrez S, Terán-Guillén J (2007) Residual flexure capacity of corroded reinforced concrete beams. Eng Struct 29: 1145–1152.    

4. Mangat PS, Elgarf MS (1999) Flexural strength of concrete beams with corroding reinforcement. ACI Struct J 96: 149–158.

5. Al-Sulimani GJ, Kaleemullah M, Basunbul IA, et al. (1990) Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members. ACI Struct J 87: 220–231.

6. Yuan YS, Jia FP, Cai Y (2004) The structural behavior deterioration model for corroded reinforced concrete beams. China Civil Eng J 34: 47–52.

7. Zhang WP, Shang DF, Gu XL (2006) Stress-strain relationship of corroded steel bars. J Tongji Univ-Nat Sci 34: 586–592.

8. Dhawan S, Bhalla S, Bhattacharjee B (2014) Reinforcement corrosion in concrete structures and service life predictions-A Review. 9th International Symposium on Advanced Science and Technology in Experimental Mechanics, New Delhi, India.

9. Ahmad S (2003) Reinforcement corrosion in concrete structures, its monitoring and service life prediction-a review. Cement Concrete Comp 25: 459–471.    

10. Wang XH, Liu XL (2010) Simplified methodology for the evaluation of the Residual strength of corroded reinforced concrete beams. J Perform Constr Fac 24: 108–119.    

11. Wang XH, Liu XL (2006) Bond strength modelling for corroded reinforcement. Constr Build Mater 20: 177–186.    

12. Torres-Acosta AA, Navarro-Gutierrez S, Terán-Guillén J (2006) Residual Flexure capacity of corroded reinforced concrete beams. Eng Struct 29: 1145–1152.

13. Xia J, Jin WL, Li LY (2012) Effect of chloride-induced reinforcing steel corrosion on the flexural strength of reinforced concrete beams. Mag Concrete Res 64: 471–485.    

14. Wang W, Chen J (2011) Residual Strengths of Reinforced Concrete Beams with Heavy Deterioration. Res J Appl Sci Eng Technol 2: 798–805.

15. Tachibana Y, Maeda KI, Kajikawa Y, et al. (1990) Mechanical behaviour of RC beams damaged by corrosion of reinforcement. Proceedings of the 3rd International Symposium on Corrosion of Reinforcement in Concrete Construction, Wishaw, 178–187.

16. Imam A, Azad AK (2016) Prediction of residual shear strength of corroded reinforced concrete beams. Int J Adv Struct Eng 8: 307–318.

17. Cairns J, Du Y, Law D (2008) Structural performance of corrosion-damaged Concrete beams. Mag Concrete Res 60: 359–370.    

18. Ahmad S (2017) Prediction of residual flexural strength of corroded reinforced concrete beams. Anti-Corros Method M 64: 69–74.    

19. Ortega NF, Robles SI (2016) Assessment of residual life of concrete structures affected by reinforcement corrosion. HBRC J 12: 114–122.    

20. Shannag MJ, Al-Ateek SA (2006) Flexural behaviour of strengthened concrete Beams with corroding reinforcement. Constr Build Mater 20: 834–840.    

21. Hawileh RA, Abdalla JA, Al Tamimi A, et al. (2011) Behaviour of corroded steel reinforcing bars under monotonic and cyclic loadings. Mech Adv Mater Struc 18: 218–224.    

22. Jin WL, Zhao YX (2001) Effect of corrosion on bond behaviour and bending strength of reinforced concrete beams. J Zhejiang Univ-Sc A 2: 298–308.    

23. Azad AK, Ahmad S, Azher SA (2007) Residual strength of corrosion damaged reinforced concrete beams. ACI Mater J 104: 40–47.

24. Wang XH, Liu XL (2008) Modelling the flexural carrying capacity of corroded RC beams. J Shanghai Jiaotong Univ Sci 13: 129–135.    

25. Ahmad S (2014) An experimental study on correlation between concrete resistivity and reinforcement corrosion rate. Anti-Corros Method M 61: 158–165.    

26. Torres-Acosta AA, Martı´nez-Madrid M (2003) Residual life of corroding reinforced concrete structures in marine environment. J Mater Civil Eng 15: 344–353.    

27. Imam A, Anifowose F, Azad AK (2015) Residual strength of corroded reinforced concrete beams using an Adaptive Model based on ANN. Int J Concr Struct M 9: 159–172.    

28. Abdalla JA, Elsanosi A, Abdelwahab A (2007) Modelling and simulation of shear resistance of R/C beams using artificial neural network. J Franklin I 344: 741–756.    

29. Wu X, Ghaboussi J, Garrett JH (1992) Use of neural networks in detection of structural damage. Comput Struct 42: 649–659.    

30. Wolpert DH, Macready WG (1997) No free lunch theorems for optimization. IEEE T Evolut Comput 1: 67–82.    

31. Rafiq MY, Bugmann G, Easterbrook DJ (2001) Neural network design for engineering applications. Comput Struct 79: 1541–1552.    

32. Bai J, Wild S, Ware JA, et al. (2003) Using neural networks to predict workability of concrete incorporating metakaolin and fly ash. Adv Eng Softw 34: 663–669.    

33. Oreta AWC, Kawashima K (2003) Neural network modelling of confined compressive strength and strain of circular concrete columns. J Struct Eng 129: 554–561.    

34. Erdem H (2010) Prediction of the moment capacity of reinforced concrete slabs in fire using artificial neural networks. Adv Eng Softw 41: 270–276.    

35. Tsai CH, Hsu DS (2002) Diagnosis of reinforced concrete structural damage base on displacement time history using the back-propagation neural network technique. J Comput Civil Eng 16: 49–58.    

36. Cabrera JG (1996) Deterioration of concrete due to reinforcement steel corrosion. Cement Concrete Comp 18: 47–59.    

37. Inel M (2007) Modelling ultimate deformation capacity of RC columns using artificial neural networks. Eng Struct 29: 329–335.    

38. Adhikary BB, Mutsuyoshi H (2006) Prediction of shear strength of steel fiber RC beams using neural networks. Constr Build Mater 20: 801–811.    

39. Sharifi Y, Tohidi S (2014) Ultimate capacity assessment of web plate beams with pitting corrosion subjected to patch loading by Artificial Neural Networks. Adv Steel Constr 10: 325–350.

40. Abdalla JA, Hawileh R (2011) Modeling and simulation of low-cycle fatigue life of steel reinforcing bars using artificial neural network. J Franklin I 348: 1393–1403.    

41. Naser M, Abu-Lebdeh G, Hawileh R (2012) Analysis of RC T-Beams strengthened with CFRP plates under fire loading using ANN. Constr Build Mater 37: 301–309.    

42. Abdalla JA, Hawileh RA (2013) Artificial Neural Network predictions of fatigue life of steel bars based on hysteretic energy. J Comput Civil Eng 27: 489–496.    

43. Abdalla JA, Saqan EI, Hawileh RA (2014) Optimum seismic design of unbonded post-tensioned precast concrete walls using ANN. Comput Concrete 13: 547–567.    

44. Alqedra MA, Ashour AF (2005) Prediction of shear capacity of single anchors located near a concrete edge using neural networks. Comput Struct 83: 2495–2502.    

45. Sakthivel PB, Ravichandran A, Alagumurthi N (2016) Modelling and prediction of flexural strength of hybrid mesh and fiber reinforced cement-based composites using Artificial Neural Network (ANN). Int J GEOMATE Geotech Const Mat Env 10: 1623–1635.

46. Kumar EP, Sharma EP (2014) Artificial Neural Networks-A Study. Int J Emerg Eng Res Technol 2: 143–148.

47. Flood I, Kartam N (1994) Neural networks in civil engineering. II: Systems and application. J Comput Civil Eng 8: 149–162.    

48. Flood I, Christophilos P (1996) Modelling construction processes using artificial neural networks. Automat Constr 4: 307–320.    

49. Jeng DS, Cha DH, Blumenstein M (2003) Application of Neural Networks in Civil Engineering problems. Proceedings of the International Conference on Advances in the Internet, Processing, Systems and Interdisciplinary Research.

50. Baughman DR (1995) Neural networks in bioprocessing and chemical engineering [PhD Dissertation]. Virginia Tech, Blacksburg, VA.

51. Güler İ, Übeylı ED (2005) ECG beat classifier designed by combined neural network model. Pattern Recogn 38: 199–208.    

52. Li L, Jiao L (2002) Prediction of the oilfield output under the effects of nonlinear factors by artificial neural network. J Xi'an Petrol Inst 17: 42–44.

53. Moghadassi AR, Parvizian F, Hosseini SM, et al. (2009) A new approach for estimation of PVT properties of pure gases based on artificial neural network model. Braz J Chem Eng 26: 199–206.    

54. Mohaghegh S (1995) Neural network: What it can do for petroleum engineers. J Petrol Technol 47: 42–42.    

55. Chen HM, Tsai KH, Qi GZ, et al. (1995) Neural network for structure control. J Comput Civil Eng 9: 168–176.    

56. HasançEbi OU, Dumlupınar T (2013) Linear and nonlinear model updating of reinforced concrete T-beam bridges using artificial neural networks. Comput Struct 119: 1–11.    

57. Azad AK, Ahmad S, Al-Gohi BHA (2010) Flexural strength of corroded reinforced concrete beam. Mag Concrete Res 62: 405–414.    

58. Beale MH, Hagan MT, Demuth HB (2013) Neural network toolboxTM user's guide, Natick, MA: The Mathworks Inc.

59. Hastie T, Tibshirani R, Friedman J (2009) The elements of statistical learning: data mining, inference, and prediction, 2 Eds., Berlin, Germany: Springer.

Copyright Info: © 2017, Ashhad Imam, et al., licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved